ASA 5505 VPN client LAN access problem

Question

Hello,
I'm not expert in ASA and routing so I ask some support the following case.
There is a Cisco VPN client (running on Windows 7) and an ASA5505.
The goals are client could use remote gateway on ASA for Skype and able to access the devices in ASA inside interface.
The Skype works well but I cannot access devices in the interface inside via VPN connection.
Can you please check my following config and give me advice to correct NAT or VPN settings?
ASA Version 7.2(4)
hostname ciscoasa
domain-name default.domain.invalid
enable password wDnglsHo3Tm87.tM encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
interface Vlan1
nameif inside
security-level 100
ip address 192.168.1.1 255.255.255.0
interface Vlan2
nameif outside
security-level 0
ip address dhcp setroute
interface Vlan3
no forward interface Vlan1
nameif dmz
security-level 50
no ip address
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
ftp mode passive
dns server-group DefaultDNS
domain-name default.domain.invalid
same-security-traffic permit inter-interface
same-security-traffic permit intra-interface
access-list inside_access_in extended permit tcp 192.168.1.0 255.255.255.0 any
access-list inside_access_in extended permit udp 192.168.1.0 255.255.255.0 any
access-list outside_access_in extended permit ip any 192.168.1.0 255.255.255.0
pager lines 24
logging enable
logging asdm informational
mtu inside 1500
mtu outside 1500
mtu dmz 1500
ip local pool VPNPOOL 10.0.0.200-10.0.0.220 mask 255.255.255.0
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-524.bin
no asdm history enable
arp timeout 14400
nat-control
global (outside) 1 interface
nat (inside) 1 10.0.0.0 255.255.255.0
nat (inside) 1 192.168.1.0 255.255.255.0
nat (outside) 1 10.0.0.0 255.255.255.0
access-group inside_access_in in interface inside
access-group outside_access_in in interface outside
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
aaa authentication ssh console LOCAL
http server enable
http 192.168.1.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto dynamic-map outside_dyn_map 20 set pfs group1
crypto dynamic-map outside_dyn_map 20 set transform-set ESP-3DES-SHA
crypto map outside_map 65535 ipsec-isakmp dynamic outside_dyn_map
crypto map outside_map interface outside
crypto isakmp enable outside
crypto isakmp policy 10
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
telnet timeout 5
ssh 192.168.1.0 255.255.255.0 inside
ssh timeout 5
ssh version 2
console timeout 0
dhcpd auto_config outside
dhcpd address 192.168.1.2-192.168.1.33 inside
dhcpd dns xx.xx.xx.xx interface inside
dhcpd enable inside
group-policy DfltGrpPolicy attributes
banner none
wins-server none
dns-server value 84.2.44.1
dhcp-network-scope none
vpn-access-hours none
vpn-simultaneous-logins 3
vpn-idle-timeout 30
vpn-session-timeout none
vpn-filter none
vpn-tunnel-protocol IPSec l2tp-ipsec webvpn
password-storage disable
ip-comp disable
re-xauth disable
group-lock none
pfs disable
ipsec-udp disable
ipsec-udp-port 10000
split-tunnel-policy tunnelall
split-tunnel-network-list none
default-domain none
split-dns none
intercept-dhcp 255.255.255.255 disable
secure-unit-authentication disable
user-authentication disable
user-authentication-idle-timeout 30
ip-phone-bypass disable
leap-bypass disable
nem enable
backup-servers keep-client-config
msie-proxy server none
msie-proxy method no-modify
msie-proxy except-list none
msie-proxy local-bypass disable
nac disable
nac-sq-period 300
nac-reval-period 36000
nac-default-acl none
address-pools none
smartcard-removal-disconnect enable
client-firewall none
client-access-rule none
webvpn
  functions url-entry
  html-content-filter none
  homepage none
  keep-alive-ignore 4
  http-comp gzip
  filter none
  url-list none
  customization value DfltCustomization
  port-forward none
  port-forward-name value Application Access
  sso-server none
  deny-message value Login was successful, but because certain criteria have not been met or due to some specific group policy, you do not have permission to use any of the VPN features. Contact your IT administrator for more information
  svc none
  svc keep-installer installed
  svc keepalive none
  svc rekey time none
  svc rekey method none
  svc dpd-interval client none
  svc dpd-interval gateway none
  svc compression deflate
group-policy XXXXXX internal
group-policy XXXXXX attributes
vpn-tunnel-protocol IPSec
split-tunnel-policy tunnelall
split-tunnel-network-list none
username XXXXXX password G910DDfbV7mNprdR encrypted privilege 15
username XXXXXX password 5p9CbIe7WdF8GZF8 encrypted privilege 0
username XXXXXX attributes
vpn-group-policy XXXXXX
username XXXXX password cRQbJhC92XjdFQvb encrypted privilege 15
tunnel-group XXXXXX type ipsec-ra
tunnel-group XXXXXX general-attributes
address-pool VPNPOOL
default-group-policy XXXXXX
tunnel-group XXXXXX ipsec-attributes
pre-shared-key *
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
  message-length maximum 512
policy-map global_policy
class inspection_default
  inspect dns preset_dns_map
  inspect ftp
  inspect h323 h225
  inspect h323 ras
  inspect rsh
  inspect rtsp
  inspect esmtp
  inspect sqlnet
  inspect skinny
  inspect sunrpc
  inspect xdmcp
  inspect sip
  inspect netbios
  inspect tftp
  inspect icmp
service-policy global_policy global
prompt hostname context
Cryptochecksum:a8fbb51b0a830a4ae823826b28767f23
: end
ciscoasa#
Thanks in advance!
fbela

Answer 1

config#no nat (inside) 1 10.0.0.0 255.255.255.0 < This is not required.
Need to add - config#same-security-traffic permit intra-interface
                                 #access-list extended nonat permit ip 192.168.1.0 255.255.255.0 10.0.0.0 255.255.255.0
                                 #nat (inside) 0 access-list nonat
Please add and test it.
Thanks
Ajay