ASA 5512 ver8.6(1)2 Turning off Flood Protection for a UDP range
Hello, I've got a client that's using a file transfer program that uses UDP range 30001-30021 for data and TCP22 for control. The program, Aspera, can have up to 2000 connections a second and is causing the ASA to think it is under attack. Is there anyway to turn off inspection for that range in the config via the CLI ?? I've been searching for hours here. Thanks
Hello, I've got a client that's using a file transfer program that uses UDP range 30001-30021 for data and TCP22 for control. The program, Aspera, can have up to 2000 connections a second and is causing the ASA to think it is under attack. Is there anyway to turn off inspection for that range in the config via the CLI ?? I've been searching for hours here. Thanks
Similar Messages
-
How do I turn off password protection for apps on my Iphone4 and keep them from loading on all other devices?
What do you mean by "password protection for apps"?
To keep apps from downloading on a device automatically, go to Settings> Store> and turn off the things you don't want downloaded automatically. -
Turn off password protection for digital signature
I have an employee who set up his electronic signature a while back and he can't remember the password to it, and therefore he cannot sign a PDF form digitally now. How can he turn off the password without having to remember his old one?
If that was allowed, what would the point of a password be in the first place?
However, you don't say how the user is signing.
If using EchoSign follow that service's process.
If trying to access a signing certificate (digital ID), start over by creating a new digital ID (self signed).
If you've purchased digital IDs from a vendor, ask the PKI admin.
hth,
Ben -
Every time I start iTunes I get the message: "iTunes exec has been set to run in compatability mode for an older version of Windows. Turn off compatability mode for iTunes before you open it." How do I turn off the compatability mode? Particularly when I have to do it before I turn on iTunes.
Try the following document, only be sure that none of the boxes in the compatibility mode tab are checked (not just the compatibility mode box itself):
iTunes for Windows: How to turn off Compatibility Mode -
recieved error message that states" itunes exe has been set to run in compatibility mode for an older versions of windows for best results turn off compatibility mode for itunes before you open it. How do i access compatibility mode and turn it off ? Believe i have Windows 7.
Try the following document, only be sure that none of the boxes in the compatibility tab are checked (not just the compatibility mode box itself):
iTunes for Windows: How to turn off Compatibility Mode -
I have ios 7 and lately when i go to settings-cellular and try to turn off cellular data for some apps it doesnt work. As i turn off cellular data for one app immideately after i exit settings and re-enter settings cellular data for that same app goes back on again by itself. That happens for most of my apps and is reqlly annoying. Whats more annoying is that when i am not using wifi even though the settings for cellular data for safari or facebook or some other app are turned on (since i cant turn them off as i mentioned) i get the message that cellular data is turned off for this app and i cant use the internet at all on cellular data. I have reset to factory settings and restored from backup and the problem persists. Is there some help or tips you can offer me?
Did you get anywhere with this? I'm considering wiping it and setting it up as a new device.
-
HT4098 How do I turn off auto-renew for the Guardian?
Trying to turn off auto-renew for The Guardian. From PC.
I did the following:
1. Launch iTunes on your computer
2. Choose Store>Sign In from the iTunes menu.
3. Enter your Apple ID and password when prompted.
4. Choose Store>View My Account. You may be asked to re-enter your Apple ID password. Click
View Account. (I chose "iTunes Store", in the side bar, since the word "Store" in the menu bar didn't list "My Account". Then I chose "Account" in Quick Links, on the right-hand side of the screen. I got the "Account Information" ok.)
5. From the Account Information screen, scroll to the bottomof the page to the Settings section.
Then it said to: 6. Click "Manage" to the right of "Subscriptions".
The word "Subscriptions" does not appear in the Settings section. Nothing in the Settings section takes me to a page on which to manage my subscriptions.Hi
Read this Subscribe to iTunes Match - Apple Support
This includes a section about turning off auto renew.
Jim -
Streaming audio data won't stop unless I turn off the phone for 5 minutes.
I have been testing the Curve 8330 regarding streaming audio from an icecast server. The address of the station is http://www.AirProgressive.org, click on "listen". (I have already run this by the icecast experts and they say it is a Blackberry "bug")
BLACKBERRY USERS! PLEASE BE AWARE THAT THE STREAM (dataflow) DOES NOT STOP WHEN YOU CLICK "STOP" ON THE MEDIA PLAYER! (and will continue for as long as you leave it on, and even if you turn off your BB for less than 5 Minutes.) I'm not sure if you are charged for these streams, but it seems that the battery is depleted rapidly if this continues without aborting it. See details of my testing below:
> Access icecast stream by clicking on the link on the website:
http://www.airprogressive.org:8000/stream.m3u
> Stream consists of mp3 at 32kbps / 22050 Hz.
> Stock media player launches, stops at "Do you want to open or save the item."
> No connections started yet (viewing "List Clients" page of icecast admin interface).
> Click "open", stream begins playing.
> Two connections are started instead of just one, always offset by 2 seconds.
-- but sometimes only one connection starts.
> FYI, Icecast config: <client-timeout>30</client-timeout>
Here is the output from the "List Clients" page of Icecast2 Admin
IP
Seconds Connected
User Agent
Action
68.7.238.55
406
WinampMPEG/5.62, Ultravox/2.1
Kick
74.82.68.16
6
Mozilla/4.8 [en] (Windows NT 5.0; U)
Kick
74.82.68.16
4
Mozilla/4.8 [en] (Windows NT 5.0; U)
Kick
Note the last two entries with the same IP address. This is the Blackberry. Top entry is winamp player on PC for reference. Don't know why two listener connections are generated.
> Stream is "Stopped" (i.e. click stop)
> Stream is restarted (i.e. click Play)
> A new connection is started, this time with a new +1 IP address.
IP
Seconds Connected
User Agent
Action
68.7.238.55
687
WinampMPEG/5.62, Ultravox/2.1
Kick
74.82.68.16
287
Mozilla/4.8 [en] (Windows NT 5.0; U)
Kick
74.82.68.16
285
Mozilla/4.8 [en] (Windows NT 5.0; U)
Kick
74.82.68.17
8
Mozilla/4.8 [en] (Windows NT 5.0; U)
Kick
I can understand that the player may continue to communicate when "stopped" to fill the lookahead buffer, but when it is restarted, it should use the same connection and not start a new one.
> Click Stop.
> Click Play.
IP
Seconds Connected
User Agent
Action
68.7.238.55
803
WinampMPEG/5.62, Ultravox/2.1
Kick
74.82.68.16
403
Mozilla/4.8 [en] (Windows NT 5.0; U)
Kick
74.82.68.16
401
Mozilla/4.8 [en] (Windows NT 5.0; U)
Kick
74.82.68.17
124
Mozilla/4.8 [en] (Windows NT 5.0; U)
Kick
74.82.68.18
24
Mozilla/4.8 [en] (Windows NT 5.0; U)
Kick
> Yet another connection is started with a new "listener".
> Click "back" to exit from browser in Blackberry.
> All threads continue.
--> I have tested this many times and the threads continue without being cleaned up indefinitely, even though the player is stopped and the stream is not "playing" on the handset.
> Turn off mobile network. Handset not communicating.
> Threads continue
> Handheld turned off.
IP
Seconds Connected
User Agent
Action
68.7.238.55
995
WinampMPEG/5.62, Ultravox/2.1
Kick
74.82.68.16
595
Mozilla/4.8 [en] (Windows NT 5.0; U)
Kick
74.82.68.16
593
Mozilla/4.8 [en] (Windows NT 5.0; U)
Kick
74.82.68.17
316
Mozilla/4.8 [en] (Windows NT 5.0; U)
Kick
74.82.68.18
216
Mozilla/4.8 [en] (Windows NT 5.0; U)
Kick
Finally, after over 300 seconds, the threads are finally cleaned up.
IP
Seconds Connected
User Agent
Action
68.7.238.55
1139
WinampMPEG/5.62, Ultravox/2.1
Kick
So, to stop the streaming server from communicating with the Blackberry handset, you must either turn it off or disable mobile network for at least 5 minutes.
It appears that the handset continues to transfer data (and therefore incur charges, if the user does not have an unlimited data plan) if the handset is not turned off or mobile network disabled for at least five minutes. It also runs down the battery much faster because the radio transmitter is actively being used, even if the user is not listening to the stream.
The Blackberry network has intervening servers that continue to receive data from the streaming server even if the handset is off. This behavior likely has utility to deal with the realities of the cellphone network, to allow the stream to be transferred from one cell to another, and deal with the possibility that the handset may be out of range for up to 5 minutes without "interruption." However, it is hard to turn off the stream.
QUESTIONS:
1. Is there a way to stop this sort of behavior using a configuration setting or something? It seems particularly stupid to start a new stream connection each time a STOP/START cycle is completed, allowing the old connections to continue streaming data (even if the data does not make it to the handset).
2. IS IT TRUE that the user will be "charged" for the data streams that are not disconnected?
3. Is there a way for a developer to send a signal to the intervening cellphone network to discontinue the orphan streams?
THANKS!!No, I'm using something like this :
to start...
channel = new SoundChannel();
soundPlay = new Sound();
urlReq=new URLRequest;
urlReq.url=mylUrl; // url of radio mp3
soundPlay.load(urlReq);
channel = soundPlay.play();
to stop it...
channel.stop();
channel=null;
try{soundPlay.close();} catch (e:Error) {} // error or not, the sream won't stop.
Any idea ? Did you try with a NetStream object ?
Bernard -
I get a message that itunes has stopped working. When I check out why it is because of the dep security on my computer. When I try to find the program for itunes for the .exe file i cannot find it to turn off the dep for that file
I found the file but when I added it to the list for the Data Execution Program to ignore , I received a message that the Program.x86/itunes file must have the DEP on in order to run. Anyone else having this problem ?
-
Can't turn off password protected sharing - Windows 7
When I turn off password protected sharing in the network and sharing center's advanced settings, I save settings but when I go back in, it's turned on again. Turning it off doesn't stick.
This is what seess to be forcing a password and prevents me from setting up a backup to a network share drive.
Any ideas?I noticed there is loads of stuff about problems with Networking Win 7 and XP/2000 PCs etc. I also couldnt get Password Protected sharing OFF to stick and had problems with Win 7/XP machines loosing sight of each other, when a Win 7 PC was added to a Network.
I saw some comments about the Guest Account - needs to be about with blank password but the password prot off may not like that
So, I enabled it, set a blank password on it but turned it Off!!.
And, as if by magic, Password Protected Sharing OFF engaged OK.
First, Using the console.
Windows Start - type mmc in search box, select mmc.exe which appears at top of Start Window.
On the console window do File - Add/remove Snap ins - select Local Users and groups - Add - Local computer.
Add other snap ins if you wish then OK. File Save to save your console setup with a 'name'.msc - use the 'name' in the Windows Start search box next time.
In the console window.
Expand Local Users and groups, select User folder, Select Guest Acct, Rt Click - Properties
Ticked - User Cannot Change Password and Password Never Expires
Unticked - User must change password, Account is disabled, Account is locked out
Apply then OK
Select Guest Account - Rt Click - Set Password - Proceed - ensure password fields are blank - OK
Windows Start - Control Panel - User Accounts - Add or Remove User Account
Select the Guest Account and Turn it Off
Control Panel - Network and Sharing Center - Change Advanced Sharing Settings
Expand Home or Work
Network Discovery ON
File and printer sharing ON
Public Folder Sharing ON
Media Streaming Off
Enable file sharing 40-56 encryption machines (if XP/2000 etc PCs in workgroup)
Password Protected Sharing OFF
Hope this helps; I could however be wrong about the logic but lets see what the experts say (please modify/delete as appropriate)!!
I must admit the 'connectivity' on my Network has improved; PCs not loosing each other.
Good Luck
Steve
Regards Steve -
IPhone turns off then on for no reason
iPhone turns off then on for no reason
martazoila:
Welcome to Apple Discussions.
Take a look at these FAQs by Dr. Smoke and see if any of his recommendations help:
Resolving Disk, Permission, and Cache Corruption
Multiple applications quit unexpectedly or fail to launch
The Spinning Beachball of Death
Please post back and let me know if anything worked for you, or with further questions or comments.
Good luck.
cornelius -
Can I turn off home sharing for other computers from my own?
I recently got a new computer and would like to add my music library to it. When I try to enable home sharing a message pops up stating that I already have 5 computers on my home sharing network. I don't have all of the 5 computers because some have broken and so my question is that, is there any way for me to turn off home sharing for those computers from my own?
No such thing is possible via iTunes.
What is possible is deathorizing all computers and then authorize only the one's that you have access to.
About Authorization and De-Authorization -
Turn off compatibility mode for itunes
How to turn off compatibility mode for itunes
Here's a support article that may help:
iTunes for Windows: How to turn off Compatibility Mode - Apple Support
Cheers,
GB -
Can a one please help me turn off auto play for Facebook the option is no longer in my General settings why is this ?
And yet the link you posted only tells you how to do it on the Facebook App for Android. Nothing about the Facebook page is mentioned at all, or how to do it on an iPhone.
With that said, and assuming you have the most up to date version of the Facebook App, you can now turn the auto play feature Off within the Facebook App itself. Tap on the "More" icon on the bottom right, then scroll down to Settings->Videos and Photos->Auto Play. If Smart auto-Play is on turn it off. Then you can set the check mark on "Never Play Videos Automatically" which is the same as Off. -
Can't turn off "Full Justification" for Isaacson's book "Steve Jobs"
On my iPod Touch 2G (iOS 4.2.1-latest for this iPod), I can NOT turn off "Full Justification" for Isaacson's book "Steve Jobs". Other books obey the setting. Anyone else have this problem?
Suggestions?Alternatively:
In Settings/General, scroll down to find iBooks in the left-hand side. You can turn off Full Justification in the options area (as well as Auto-hyphenation).
Maybe you are looking for
-
Since going up to Lion I am having problems with my HP Officejet 7500A printer. It is on the network wirrelessly. After every page I have to turn the printer off and back on again because my mac cant find the printer on the network. The windows me
-
How to create a shortcut of a folder and put it on the desktop using LabVIEW?
Anyone done this before?
-
Copying wireless router password and settings to a new Powerbook
I recently bought a second 15" powerbook after my girlfriend bought my former one. I bought a Lynksys WRT54G Wireless G Router and after some configuration, I successfully connected her powerbook to my DSL connection wirelessly. However I now am havi
-
Crystal Reports 10 Error "Unknown Query Engine Error"
Hi guys, after creating reports with crystal reports 2008 fails,because there's no 64-bit runtime version i try to develope my reports now with Crystal Reports 10 (ships with Visual Studio 2008). I've minimized the complexity to a minimum - a simple
-
Nautilus doesn't refresh directories
Hello I am having a problem with nautilus because when another application adds or removes files the change is not seen in the directory when I use nautilus (new files are not in the folder untill I go ot and get back to the directory), I hope you