ASA 5550 Open Connections Increase

We have seen a dramatic rise in open connections on the ASA in the past couple days. From about 20,000 to close to 40,000 now. My first question is how efficiently monitor these connections. We graph the total number via SNMP, but in this case, I need to narrow down the problematic host(s). Currently, I am issuing a "sh conn", displaying all connections and then copying and pasting to a text file which I then load into a spreadsheet to sort. There has got to be a better way.
I am also not quite sure what to do about this situation. Using the method above, I can see that there are 15,000+ connections open to our mail servers (which is abnormal), but there is no abnormal usage or open tcp connections on the mail servers themselves. So what are these connections exactly? What should be done to minimize them?
Here is an example:
TCP out 86.195.154.184:3633 in 66.245.177.215:25 idle 0:08:36 bytes 15615 flags UfIOB
TCP out 86.195.154.184:4852 in 66.245.177.215:25 idle 0:38:58 bytes 15852 flags UfIOB
TCP out 83.20.185.182:5140 in 66.245.177.215:25 idle 0:00:55 bytes 2799 flags UfFRIOB
TCP out 69.40.127.71:60260 in 66.245.177.215:25 idle 0:00:15 bytes 1135 flags UfIOB
TCP out 24.132.222.168:62983 in 66.245.177.215:25 idle 0:00:04 bytes 483 flags UfOB
TCP out 24.132.222.168:63729 in 66.245.177.215:25 idle 0:04:12 bytes 759 flags UfIOB
I should also mention that approximately 11,000 of these 15,000 connections have the UfIOB flags.

These are half open connections which may be left after the client closing the connection but it is still active on ASA. It may happen because of TCP timeout value set at very high. If you need the connection timeout value for TCP to be set high for a certain IP flow, then it is recommended to use a policy map.

Similar Messages

ASA 5550 V05 Active/passive one stop work

Hello,
I have a client, that got 2x ASA 5550 V05 and they were configured to act as active/passive but some months ago they had problems with them, so they remove them from the network.
Recently, I went there, and saw that one of the firewall (the one that was as passive) is not working, when I connect via console and reboot it I don't even see nothing, the boot starts, but suddenly, nothing shows up.
The things is that the client wants to get back to use the ASAs, so is there any way to fix that?
As an alternative we were thinking in acquire another ASA, to configure the two as active/passive again, the ASA that its working is:
ASA 5550 V05 ; Cisco Adaptive Security Appliance Software Version 7.2(4) ; Device Manager Version 5.2(4) ; 8 Ports GB ( 4+4) ; asa724-k8.bin
My question is, I need an exactly the same model ASA?
I was thinking in put one ASA5555-2SSD120-K9. That would work?
Or should I try anything else? I don't have many skills with ASA specially troubleshooting it.
Thanks in advance

Hi Diogo,
The issue related to failed firewall could be related to a hardware issue, you may get some outputs from console session when the ASA is booting up. Try to boot up the firewall again, if this doesn´t work then you should open a TAC case so they can help you replacing the firewall(the ASA needs to be under an active contract).
Regarding ASA model and failover, both firewalls must be the same model(hardware).
See the below requirements for failover to work:
http://www.cisco.com/c/en/us/support/docs/security/pix-500-series-security-appliances/77809-pixfailover.html#req
Regards,
Harvey.
Please rate if this is correct answer.

Open connections between AS Java and AS ABAP when using JRA

Hi, we have a problem with open connections and hope that someone here could give me hint where to find a solution.
The situation is that we open a connection from a Java application to an AS ABAP. In detail, the application first connects to a statefull session bean on the AS Java by RMI. The bean communicates with the associated AS ABAP by the Java Resource Adapter (JRA).
All interactions between all components work correctly. But even after we close the application, manually close of the connections (on side of the AS Java) , remove all created and used session beans there are still open connections between the AS ABAP and the AS Java.
The transaction smgw (Gateway Monitor) shows open connections from jlaunch to our local SAP gateway using the internal communication protocol. Obviously, the established connections are not closed, even when they are open for a week or longer.
After opening 100 connections, the AS ABAP denies additional connection attempts.
We have been able to close all open connections by restarting the AS Java or by restarting the Connector over the Visual Administrator (path: Cluster Server Services Connector Container select the right connector stop / start).
We have developed our application similar to the tutorial from [https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/ad09cd07-0a01-0010-93a9-933e247d3ba4]
Can someone explain to us why the connections stay open for so long? Is there no timeout mechanism? Or is there some way to close the connections from our Java application?

Hello,
maybe someone can help us with our problem.
We have developed our application similar to the tutorial from https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/ad09cd07-0a01-0010-93a9-933e247d3ba4 and it was running without problem with the SP12, now we change our system to SP16 and we are having the problem described in note 1083348, but as you can see, for us it was working with SP12 and now it doesn't work with SP16....
Here is part of our code....
    public List getAll() {
        String functionName = "bla";
        try {
            openConnection();
            MappedRecord response = (MappedRecord) interaction.execute(null, request);
            MappedRecord record = (MappedRecord) response.get("E_S_RETURN_CODE");
            if (((String) record.get("RETURN_CODE")).equalsIgnoreCase("E")) {
                throw new SQLException((String) record.get("RETURN_TXT"));
        catch (ResourceException exc) {
            throw new EJBException(".");
        catch (SQLException exc) {
            throw new EJBException(".");
        finally {
            closeConnection();
    protected void openConnection() {
        try {
            connection = connectionFactory.getConnection();
            interaction = connection.createInteraction();
        catch (ResourceException exc) {
            interaction = null;
            connection = null;
            throw new EJBException(getExceptionText(exc));
protected void closeConnection() {
       try {
            if (interaction != null) {
                interaction.close();
            if (connection != null) {
                connection.close();
        catch (ResourceException exc) {
            throw new EJBException(".");
With that code we are getting this error: "Connection handle is already closed and no longer associated with a managed connection" everytime we try to close the connection in the method closeConnection().
We were thinking that maybe we should not close the connections, because the were already close, and tried not to close the connection (connection.close()), but then after a few time we are getting the following error, because we are not closing the connections:
Connection to ABAP System could not be opened, because the Connection Factory returns "Cannot get connection for 120 seconds. Possible reasons: 1) Connections are cached within SystemThread(can be any server service or any code invoked within SystemThread in the SAP J2EE Engine), 2) The pool size of adapter "eis/..." is not enough according to the current load of the system or 3) The specified time to wait for connection is not enough according to the pool size and current load of the system. In case 1) the solution is to check for cached connections using the Connector Service list-conns command, in case 2) to increase the size of the pool and in case 3) to increase the time to wait for connection property. In case of application thread, there is an automatic mechanism which detects unclosed connections and unfinished transactions.". Please check the connection defined for the Connection Factory of the Java Resource Adapter with JNDI name...
Any help?

Cache server metrics-Current Open connections

hello all,
I have a query regarding the dashboard cache server metrics in CMC.
When I run the dashboards, data is getting cached in the cache memory, but dashboards are using that cached data only when the "Current Open connections" in the "Dashboard cache server metric" is non-zero.
i.e., example when I run the dashboards for the first time, "Current Open connections" under Cache server metrics is 10. When I run the dashboards immediately with in 20 minutes, results would come very fast. But after 20 minutes , the "Current Open connections" are becoming 0(connections seems to be expiring) and after I run the dashboards, they are performing slowly though the data is present in the cache memory.
I have tried changing the "Idle Connection timeout" to 240 minutes from the existing 60 minutes, still "Current Open connections" under Cache server metrics is becoming 0 after 20 minutes.
Kindly help me as this is affecting the dashboards performance.
Thank you.

Hello,
Appreciate any help on this. Attached is the screenshot of what I was referring to. "Currently Open Connections" becoming 0 in 20 minutes(even after the idle time connection timeout is increased to 240 minutes) , while the number of open connections shows the number.

ASA 5550 IPv6 Compatibility

Hi All,
I need to understand if ASA 5550 ver 8.2(1) is comptible with IPv6, if not what is the upgrade path to make it IPv6 compatible. The requirement is dual stack of IPv4 and IPv6 should run in the same HA cluster and later will shift IPv6 completely.
The existing infrastructure is equipped with ASA with HA Active/Active mode. The command output for required details are attached here in txt mode.
Thanks in Advance
Sujit

I need to understand if ASA 5550 ver 8.2(1) is comptible with IPv6, if not what is the upgrade path to make it IPv6 compatible. The requirement is dual stack of IPv4 and IPv6 should run in the same HA cluster and later will shift IPv6 completely.
Here are some useful facts for you
IPv6 address command appeared on 7.0.1
IPv6 support on transparent mode appeared on 8.2.1
IPv6 address support for an standby interface ( failover) appeared on 8.2.2
In the latest 8.3 code support for L2L VPN for IPv6 scenarios have been added.
9.0(1) Features
OSPFv3 support.
DNS inspection.
NAT supported on IPv6 traffic and also from IPv4 to IPv6( From IPv4 to IPv6 NAT is not supported on Transparent Mode).
DHCP for IPv6 (DHCPv6) relay.
IPv6 VPN connections to its outside interface using SSL and IKEv2/IPsec protocols.
Remember to rate all of the helpful posts
Julio Carvajal

ASA 5550 Console (Serial) TACACS

I have a ASA 5550 running multiple contexts, but having the AAA authentication serial console (TACACS Server Name) LOCAL allows a tacacs challenge on connecting to the console but I am then unable to issue any commands i.e. enable or Show Run - message command autherixation failed
Has anyone setup console (serial) TACACS and got it working?
Thanks

Hi Simon,
The below are the commands which requires with respect to the console access.
aaa-server TACACS+ protocol tacacs+
aaa authentication serial console TACACS+ LOCAL
aaa authentication telnet console TACACS+ LOCAL
aaa authentication enable console TACACS+ LOCAL
aaa authentication ssh console TACACS+ LOCAL
aaa authentication http console TACACS+ LOCAL
So you should have both serial console and enable console for you settings. If you have these settings in your firewall. Also please check in the tacacs server end if privelage level is set properly for the same.
Please do rate if the given information helps.
By
Karthik

ASA 5550 failover configuration

I have two identical ASA 5550 firewalls that I need to set up for Active/Standby failover so I can then upgrade them with zero downtime. I am running them in single, routed mode so I would have to configure failover for Active/Standby. Can I do a cable-based configuration? The documentation states that is only available on the PIX 500 Security Appliance. Going through the Support Community forums it appears I can. Who is right? If I can do cable-based configuration do I have to turn off the secondary ASA to do the inital configuration? Thanks much.

Hello James,
Yes, you can do cable-based (if you mean connect the devices via a cable without a switch.. That will not be a problem)
Cisco recommends use a switch between the units for troubleshooting purposes but it's not a MUST.
Configuration wise, same procesure nothing different so just follow the regular process.
For more information about Core and Security Networking follow my website at http://laguiadelnetworking.com
Any question contact me at [email protected]
Cheers,
Julio Carvajal Segura

Best Authentication Library for Windows Phone 8.1 & Windows Desktop 8.1 Windows Store apps using Open Connect 1.0

What's the best go forward framework (Web Authentication Broker, WPF, other) to use when authenticating against an Open Connect 1.0 authentication server (that's OpenID + oAuth v2.0)? My developer says that Web Authentication Broker is not supported
in Windows Desktop 8.1 (so if you can confirm this that would be great also).
We've created a universal app to support Windows Destkop, Tablet, Phone (8.1 and up) and plan to add support for iOS and Android via Xamarin later.
Your feedback is appreciated.
Jacob Hall [email protected]

Hi Jacob,
This is not the correct forum for your question, I'll move it to [where is this forum for...] forum, where the moderator may direct you to the correct forum.
Thanks for your understanding.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Why "slow server alert" when NO running requests and NO open connections??

The snapshot below says it all. Why on earth would my dev machine with no running requests, and no open database connections, kick off a slow server alert?
I will tell you that at the exact same time this snapshot was generated, my other two servers WERE hung and were reporting "Unresponsive alerts", and they connect to the same databases. I am chasing down a chronic communication failure between our database and web servers where everything with a databae connection gets locked/hung at the same time every night, 7 days a week. The hang lasts anywhere from a few mins to 40+ mins.
Is this why my dev server would report slow? And if so, is it the skimmers or what that's causing a slow server alert?? Would it only report "Unresponsive" if there were actual page requests hanging, vs. a "Slow Server Alert"?
This is CF10 (update 12) 64-bit on Windows 2008 R2, IIS 7, connecting to separate Oracle 11g server.
Thanks for any insights.
Snapshot generated on : Sun Dec 08 20:10:43 EST 2013
Caused by : Slow Server Alert
Profiling : Disabled
Memory Tracking : Disabled
Average server response time is more than 20 seconds.
*Total Running requests - 0
*Total Queued requests - 0
Template Running requests - 0
Template Queued requests - 0
Flash Remoting Running requests - 0
Flash Remoting Queued requests - 0
CFC method Running requests - 0
CFC method Queued requests - 0
Web Service Running requests - 0
Web Service Queued requests - 0
JVM Memory Stats
Free Memory : 295634776 bytes
Used Memory : 239663272 bytes
Throttle Stats [Throttle Queue Size : Throttle Memory Used]
0 : 0.0 megabytes
Query Cache Stats -
[Hit Ratio : Size : Count]
   0.0 : 0 bytes : 3
Cached Queries -
[Query Name : DSN : Size : TIme Executed : Time Taken : Line No : Function Name : Template Path]
DB Pool Stats -
[DSN :Open Conn Count : Total Conn Count : Max Con Count : Avg Open Conn Count : Avg Total Conn Count]
   GWAS_dev : 0 : 0 : Unlimited : 0 : 0
   dev_trnd_assignmentdesk : 0 : 0 : Unlimited : 0 : 0
   ADHD : 0 : 0 : Unlimited : 0 : 0
   web_dev : 0 : 7 : Unlimited : 1 : 5
   web_prod : 0 : 7 : Unlimited : 0 : 2
   nVision : 0 : 0 : Unlimited : 0 : 0
   legislation_dev : 0 : 0 : Unlimited : 0 : 0
   ISC_dev : 0 : 0 : Unlimited : 0 : 0
   legislation : 0 : 0 : Unlimited : 0 : 0
   dev_intranet : 0 : 1 : Unlimited : 1 : 5
   dev_DNADay : 0 : 0 : Unlimited : 0 : 0
   dvinciSpanish : 0 : 0 : Unlimited : 0 : 0
   dvinciORACLE : 0 : 0 : Unlimited : 0 : 0
   dev_assignmentdesk : 0 : 0 : Unlimited : 0 : 0
Java stack trace -
Full thread dump Java 1.7.0_45
"obj-skimmer-dev_assignmentdesk" prio=5 tid=1011 TIMED_WAITING
at java.lang.Object.wait(Native Method)
at coldfusion.server.j2ee.pool.PoolSkimmerThread.run(PoolSkimmerThread.java:47)
at java.lang.Thread.run(Thread.java:744)
"obj-skimmer-GWAS_dev" prio=5 tid=1027 TIMED_WAITING
at java.lang.Object.wait(Native Method)
at coldfusion.server.j2ee.pool.PoolSkimmerThread.run(PoolSkimmerThread.java:47)
at java.lang.Thread.run(Thread.java:744)
"Reference Handler" prio=10 tid=2 WAITING
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:503)
at java.lang.ref.Reference$ReferenceHandler.run(Reference.java:133)
"obj-skimmer-dvinciSpanish" prio=5 tid=1021 TIMED_WAITING
at java.lang.Object.wait(Native Method)
at coldfusion.server.j2ee.pool.PoolSkimmerThread.run(PoolSkimmerThread.java:47)
at java.lang.Thread.run(Thread.java:744)
"GC Daemon" prio=2 tid=11 TIMED_WAITING
at java.lang.Object.wait(Native Method)
at sun.misc.GC$Daemon.run(GC.java:117)
"obj-skimmer-web_dev" prio=5 tid=1033 TIMED_WAITING
at java.lang.Object.wait(Native Method)
at coldfusion.server.j2ee.pool.PoolSkimmerThread.run(PoolSkimmerThread.java:47)
at java.lang.Thread.run(Thread.java:744)
"DefaultQuartzScheduler_Worker-9" prio=5 tid=46 TIMED_WAITING
at java.lang.Object.wait(Native Method)
at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:552)
"scheduler-2" prio=5 tid=97 TIMED_WAITING
at java.lang.Object.wait(Native Method)
at coldfusion.scheduling.Scheduler.createRunnable(Scheduler.java:132)
at coldfusion.scheduling.ThreadPool.createRunnable(ThreadPool.java:138)
at coldfusion.scheduling.WorkerThread.run(WorkerThread.java:68)
"ajp-bio-8012-exec-342" prio=5 tid=1484 RUNNABLE
at java.net.SocketInputStream.socketRead0(Native Method)
at java.net.SocketInputStream.read(SocketInputStream.java:152)
at java.net.SocketInputStream.read(SocketInputStream.java:122)
at org.apache.coyote.ajp.AjpProcessor.read(AjpProcessor.java:319)
at org.apache.coyote.ajp.AjpProcessor.readMessage(AjpProcessor.java:445)
at org.apache.coyote.ajp.AjpProcessor.process(AjpProcessor.java:132)
at org.apache.coyote.AbstractProtocol$AbstractConnectionHandler.process(AbstractProtocol.jav a:539)
at org.apache.tomcat.util.net.JIoEndpoint$SocketProcessor.run(JIoEndpoint.java:298)
at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1145)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:615)
at java.lang.Thread.run(Thread.java:744)
"ajp-bio-8012-exec-345" prio=5 tid=1488 TIMED_WAITING
at sun.misc.Unsafe.park(Native Method)
at java.util.concurrent.locks.LockSupport.parkNanos(LockSupport.java:226)
at java.util.concurrent.locks.AbstractQueuedSynchronizer$ConditionObject.awaitNanos(Abstract QueuedSynchronizer.java:2082)
at java.util.concurrent.LinkedBlockingQueue.poll(LinkedBlockingQueue.java:467)
at org.apache.tomcat.util.threads.TaskQueue.poll(TaskQueue.java:86)
at org.apache.tomcat.util.threads.TaskQueue.poll(TaskQueue.java:32)
at java.util.concurrent.ThreadPoolExecutor.getTask(ThreadPoolExecutor.java:1068)
at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1130)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:615)
at java.lang.Thread.run(Thread.java:744)
"DefaultQuartzScheduler_Worker-1" prio=5 tid=38 TIMED_WAITING
at java.lang.Object.wait(Native Method)
at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:552)
"Timer-4" prio=5 tid=63 WAITING
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:503)
at java.util.TimerThread.mainLoop(Timer.java:526)
at java.util.TimerThread.run(Timer.java:505)
"DefaultQuartzScheduler_QuartzSchedulerThread" prio=5 tid=48 TIMED_WAITING
at java.lang.Object.wait(Native Method)
at org.quartz.core.QuartzSchedulerThread.run(QuartzSchedulerThread.java:430)
"ajp-bio-8012-AsyncTimeout" prio=5 tid=78 TIMED_WAITING
at java.lang.Thread.sleep(Native Method)
at org.apache.tomcat.util.net.JIoEndpoint$AsyncTimeout.run(JIoEndpoint.java:136)
at java.lang.Thread.run(Thread.java:744)
"cfthread-0" prio=5 tid=884 TIMED_WAITING
at java.lang.Object.wait(Native Method)
at coldfusion.util.GenericThreadPool$ThreadPoolRunnableFactory.createRunnable(GenericThreadP ool.java:177)
at coldfusion.scheduling.ThreadPool.createRunnable(ThreadPool.java:138)
at coldfusion.scheduling.WorkerThread.run(WorkerThread.java:68)
"DefaultQuartzScheduler_Worker-8" prio=5 tid=45 TIMED_WAITING
at java.lang.Object.wait(Native Method)
at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:552)
"Timer-2" prio=5 tid=16 TIMED_WAITING
at java.lang.Object.wait(Native Method)
at java.util.TimerThread.mainLoop(Timer.java:552)
at java.util.TimerThread.run(Timer.java:505)
"Timer-0" prio=5 tid=14 WAITING
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:503)
at java.util.TimerThread.mainLoop(Timer.java:526)
at java.util.TimerThread.run(Timer.java:505)
"worker #3" prio=5 tid=71 WAITING
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:503)
at com.jnbridge.jnbcore.server.b.c.run(Unknown Source)
at java.lang.Thread.run(Thread.java:744)
"MulticastListener" prio=5 tid=55 RUNNABLE
at java.net.TwoStacksPlainDatagramSocketImpl.receive0(Native Method)
at java.net.TwoStacksPlainDatagramSocketImpl.receive(TwoStacksPlainDatagramSocketImpl.java:1 14)
at java.net.DatagramSocket.receive(DatagramSocket.java:786)
at coldfusion.license.g.run(Unknown Source)
"ajp-bio-8012-exec-347" prio=5 tid=1493 RUNNABLE
at java.net.SocketInputStream.socketRead0(Native Method)
at java.net.SocketInputStream.read(SocketInputStream.java:152)
at java.net.SocketInputStream.read(SocketInputStream.java:122)
at org.apache.coyote.ajp.AjpProcessor.read(AjpProcessor.java:319)
at org.apache.coyote.ajp.AjpProcessor.readMessage(AjpProcessor.java:445)
at org.apache.coyote.ajp.AjpProcessor.process(AjpProcessor.java:132)
at org.apache.coyote.AbstractProtocol$AbstractConnectionHandler.process(AbstractProtocol.jav a:539)
at org.apache.tomcat.util.net.JIoEndpoint$SocketProcessor.run(JIoEndpoint.java:298)
at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1145)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:615)
at java.lang.Thread.run(Thread.java:744)
"DefaultQuartzScheduler_Worker-7" prio=5 tid=44 TIMED_WAITING
at java.lang.Object.wait(Native Method)
at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:552)
"obj-skimmer-dev_trnd_assignmentdesk" prio=5 tid=1017 TIMED_WAITING
at java.lang.Object.wait(Native Method)
at coldfusion.server.j2ee.pool.PoolSkimmerThread.run(PoolSkimmerThread.java:47)
at java.lang.Thread.run(Thread.java:744)
"ContainerBackgroundProcessor[StandardEngine[Catalina]]" prio=5 tid=76 TIMED_WAITING
at java.lang.Thread.sleep(Native Method)
at org.apache.catalina.core.ContainerBase$ContainerBackgroundProcessor.run(ContainerBase.jav a:1474)
at java.lang.Thread.run(Thread.java:744)
"ajp-bio-8012-exec-333" prio=5 tid=1442 TIMED_WAITING
at sun.misc.Unsafe.park(Native Method)
at java.util.concurrent.locks.LockSupport.parkNanos(LockSupport.java:226)
at java.util.concurrent.locks.AbstractQueuedSynchronizer$ConditionObject.awaitNanos(Abstract QueuedSynchronizer.java:2082)
at java.util.concurrent.LinkedBlockingQueue.poll(LinkedBlockingQueue.java:467)
at org.apache.tomcat.util.threads.TaskQueue.poll(TaskQueue.java:86)
at org.apache.tomcat.util.threads.TaskQueue.poll(TaskQueue.java:32)
at java.util.concurrent.ThreadPoolExecutor.getTask(ThreadPoolExecutor.java:1068)
at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1130)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:615)
at java.lang.Thread.run(Thread.java:744)
"ajp-bio-8012-exec-337" prio=5 tid=1450 TIMED_WAITING
at sun.misc.Unsafe.park(Native Method)
at java.util.concurrent.locks.LockSupport.parkNanos(LockSupport.java:226)
at java.util.concurrent.locks.AbstractQueuedSynchronizer$ConditionObject.awaitNanos(Abstract QueuedSynchronizer.java:2082)
at java.util.concurrent.LinkedBlockingQueue.poll(LinkedBlockingQueue.java:467)
at org.apache.tomcat.util.threads.TaskQueue.poll(TaskQueue.java:86)
at org.apache.tomcat.util.threads.TaskQueue.poll(TaskQueue.java:32)
at java.util.concurrent.ThreadPoolExecutor.getTask(ThreadPoolExecutor.java:1068)
at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1130)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:615)
at java.lang.Thread.run(Thread.java:744)
"worker #4" prio=5 tid=72 WAITING
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:503)
at com.jnbridge.jnbcore.server.b.c.run(Unknown Source)
at java.lang.Thread.run(Thread.java:744)
"Signal Dispatcher" prio=9 tid=4 RUNNABLE
"scheduler-5" prio=5 tid=859 TIMED_WAITING
at java.lang.Object.wait(Native Method)
at coldfusion.scheduling.Scheduler.createRunnable(Scheduler.java:132)
at coldfusion.scheduling.ThreadPool.createRunnable(ThreadPool.java:138)
at coldfusion.scheduling.WorkerThread.run(WorkerThread.java:68)
"net.sf.ehcache.CacheManager@485165c7" prio=5 tid=100 TIMED_WAITING
at java.lang.Object.wait(Native Method)
at java.util.TimerThread.mainLoop(Timer.java:552)
at java.util.TimerThread.run(Timer.java:505)
"scheduler-1" prio=5 tid=58 TIMED_WAITING
at java.lang.Object.wait(Native Method)
at coldfusion.scheduling.Scheduler.createRunnable(Scheduler.java:132)
at coldfusion.scheduling.ThreadPool.createRunnable(ThreadPool.java:138)
at coldfusion.scheduling.WorkerThread.run(WorkerThread.java:68)
"Java2D Disposer" prio=10 tid=73 WAITING
at java.lang.Object.wait(Native Method)
at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:135)
at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:151)
at sun.java2d.Disposer.run(Disposer.java:145)
at java.lang.Thread.run(Thread.java:744)
"Timer-5" prio=5 tid=74 TIMED_WAITING
at java.lang.Object.wait(Native Method)
at java.util.TimerThread.mainLoop(Timer.java:552)
at java.util.TimerThread.run(Timer.java:505)
"Thread-5" prio=5 tid=17 TIMED_WAITING
at java.lang.Thread.sleep(Native Method)
at org.apache.log4j.helpers.FileWatchdog.run(FileWatchdog.java:104)
"Thread-30" prio=5 tid=88 RUNNABLE
at java.net.DualStackPlainSocketImpl.accept0(Native Method)
at java.net.DualStackPlainSocketImpl.socketAccept(DualStackPlainSocketImpl.java:131)
at java.net.AbstractPlainSocketImpl.accept(AbstractPlainSocketImpl.java:398)
at java.net.PlainSocketImpl.accept(PlainSocketImpl.java:198)
at java.net.ServerSocket.implAccept(ServerSocket.java:530)
at java.net.ServerSocket.accept(ServerSocket.java:498)
at org.apache.catalina.core.StandardServer.await(StandardServer.java:447)
at com.adobe.coldfusion.launcher.Launcher.await(Launcher.java:499)
at com.adobe.coldfusion.launcher.Launcher.access$000(Launcher.java:63)
at com.adobe.coldfusion.launcher.Launcher$1.run(Launcher.java:341)
at java.lang.Thread.run(Thread.java:744)
"obj-skimmer-ISC_dev" prio=5 tid=1029 TIMED_WAITING
at java.lang.Object.wait(Native Method)
at coldfusion.server.j2ee.pool.PoolSkimmerThread.run(PoolSkimmerThread.java:47)
at java.lang.Thread.run(Thread.java:744)
"AuthCacheManager" prio=5 tid=19 TIMED_WAITING
at java.lang.Object.wait(Native Method)
at java.util.TimerThread.mainLoop(Timer.java:552)
at java.util.TimerThread.run(Timer.java:505)
"DefaultQuartzScheduler_Worker-5" prio=5 tid=42 TIMED_WAITING
at java.lang.Object.wait(Native Method)
at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:552)
"DefaultQuartzScheduler_Worker-10" prio=5 tid=47 TIMED_WAITING
at java.lang.Object.wait(Native Method)
at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:552)
"ajp-bio-8012-exec-338" prio=5 tid=1477 TIMED_WAITING
at sun.misc.Unsafe.park(Native Method)
at java.util.concurrent.locks.LockSupport.parkNanos(LockSupport.java:226)
at java.util.concurrent.locks.AbstractQueuedSynchronizer$ConditionObject.awaitNanos(Abstract QueuedSynchronizer.java:2082)
at java.util.concurrent.LinkedBlockingQueue.poll(LinkedBlockingQueue.java:467)
at org.apache.tomcat.util.threads.TaskQueue.poll(TaskQueue.java:86)
at org.apache.tomcat.util.threads.TaskQueue.poll(TaskQueue.java:32)
at java.util.concurrent.ThreadPoolExecutor.getTask(ThreadPoolExecutor.java:1068)
at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1130)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:615)
at java.lang.Thread.run(Thread.java:744)
"obj-skimmer-ADHD" prio=5 tid=25 TIMED_WAITING
at java.lang.Object.wait(Native Method)
at coldfusion.server.j2ee.pool.PoolSkimmerThread.run(PoolSkimmerThread.java:47)
at java.lang.Thread.run(Thread.java:744)
"scheduler-4" prio=5 tid=844 TIMED_WAITING
at java.lang.Object.wait(Native Method)
at coldfusion.scheduling.Scheduler.createRunnable(Scheduler.java:132)
at coldfusion.scheduling.ThreadPool.createRunnable(ThreadPool.java:138)
at coldfusion.scheduling.WorkerThread.run(WorkerThread.java:68)
"ajp-bio-8012-exec-343" prio=5 tid=1486 TIMED_WAITING
at sun.misc.Unsafe.park(Native Method)
at java.util.concurrent.locks.LockSupport.parkNanos(LockSupport.java:226)
at java.util.concurrent.locks.AbstractQueuedSynchronizer$ConditionObject.awaitNanos(Abstract QueuedSynchronizer.java:2082)
at java.util.concurrent.LinkedBlockingQueue.poll(LinkedBlockingQueue.java:467)
at org.apache.tomcat.util.threads.TaskQueue.poll(TaskQueue.java:86)
at org.apache.tomcat.util.threads.TaskQueue.poll(TaskQueue.java:32)
at java.util.concurrent.ThreadPoolExecutor.getTask(ThreadPoolExecutor.java:1068)
at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1130)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:615)
at java.lang.Thread.run(Thread.java:744)
"ajp-bio-8012-exec-346" prio=5 tid=1489 TIMED_WAITING
at sun.misc.Unsafe.park(Native Method)
at java.util.concurrent.locks.LockSupport.parkNanos(LockSupport.java:226)
at java.util.concurrent.locks.AbstractQueuedSynchronizer$ConditionObject.awaitNanos(Abstract QueuedSynchronizer.java:2082)
at java.util.concurrent.LinkedBlockingQueue.poll(LinkedBlockingQueue.java:467)
at org.apache.tomcat.util.threads.TaskQueue.poll(TaskQueue.java:86)
at org.apache.tomcat.util.threads.TaskQueue.poll(TaskQueue.java:32)
at java.util.concurrent.ThreadPoolExecutor.getTask(ThreadPoolExecutor.java:1068)
at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1130)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:615)
at java.lang.Thread.run(Thread.java:744)
"MulticastListener" prio=5 tid=51 RUNNABLE
at java.net.TwoStacksPlainDatagramSocketImpl.receive0(Native Method)
at java.net.TwoStacksPlainDatagramSocketImpl.receive(TwoStacksPlainDatagramSocketImpl.java:1 14)
at java.net.DatagramSocket.receive(DatagramSocket.java:786)
at coldfusion.license.g.run(Unknown Source)
"Thread-1" prio=1 tid=10 TIMED_WAITING
at java.lang.Thread.sleep(Native Method)
at com.adobe.coldfusion.bootstrap.ConsoleLogRotationHandler$1.run(ConsoleLogRotationHandler. java:57)
at java.lang.Thread.run(Thread.java:744)
"DefaultQuartzScheduler_Worker-3" prio=5 tid=40 TIMED_WAITING
at java.lang.Object.wait(Native Method)
at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:552)
"obj-skimmer-web_prod" prio=5 tid=1025 TIMED_WAITING
at java.lang.Object.wait(Native Method)
at coldfusion.server.j2ee.pool.PoolSkimmerThread.run(PoolSkimmerThread.java:47)
at java.lang.Thread.run(Thread.java:744)
"ajp-bio-8012-Acceptor-0" prio=5 tid=77 RUNNABLE
at java.net.DualStackPlainSocketImpl.accept0(Native Method)
at java.net.DualStackPlainSocketImpl.socketAccept(DualStackPlainSocketImpl.java:131)
at java.net.AbstractPlainSocketImpl.accept(AbstractPlainSocketImpl.java:398)
at java.net.PlainSocketImpl.accept(PlainSocketImpl.java:198)
at java.net.ServerSocket.implAccept(ServerSocket.java:530)
at java.net.ServerSocket.accept(ServerSocket.java:498)
at org.apache.tomcat.util.net.DefaultServerSocketFactory.acceptSocket(DefaultServerSocketFac tory.java:60)
at org.apache.tomcat.util.net.JIoEndpoint$Acceptor.run(JIoEndpoint.java:207)
at java.lang.Thread.run(Thread.java:744)
"DefaultQuartzScheduler_Worker-2" prio=5 tid=39 TIMED_WAITING
at java.lang.Object.wait(Native Method)
at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:552)
"MulticastListener" prio=5 tid=57 RUNNABLE
at java.net.TwoStacksPlainDatagramSocketImpl.receive0(Native Method)
at java.net.TwoStacksPlainDatagramSocketImpl.receive(TwoStacksPlainDatagramSocketImpl.java:1 14)
at java.net.DatagramSocket.receive(DatagramSocket.java:786)
at coldfusion.license.g.run(Unknown Source)
"Thread-375" prio=5 tid=944 RUNNABLE
at sun.print.Win32PrintServiceLookup.notifyPrinterChange(Native Method)
at sun.print.Win32PrintServiceLookup.access$100(Win32PrintServiceLookup.java:50)
at sun.print.Win32PrintServiceLookup$PrinterChangeListener.run(Win32PrintServiceLookup.java: 323)
"Timer-3" prio=5 tid=49 TIMED_WAITING
at java.lang.Object.wait(Native Method)
at java.util.TimerThread.mainLoop(Timer.java:552)
at java.util.TimerThread.run(Timer.java:505)
"ajp-bio-8012-exec-305" prio=5 tid=1357 TIMED_WAITING
at sun.misc.Unsafe.park(Native Method)
at java.util.concurrent.locks.LockSupport.parkNanos(LockSupport.java:226)
at java.util.concurrent.locks.AbstractQueuedSynchronizer$ConditionObject.awaitNanos(Abstract QueuedSynchronizer.java:2082)
at java.util.concurrent.LinkedBlockingQueue.poll(LinkedBlockingQueue.java:467)
at org.apache.tomcat.util.threads.TaskQueue.poll(TaskQueue.java:86)
at org.apache.tomcat.util.threads.TaskQueue.poll(TaskQueue.java:32)
at java.util.concurrent.ThreadPoolExecutor.getTask(ThreadPoolExecutor.java:1068)
at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1130)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:615)
at java.lang.Thread.run(Thread.java:744)
"DefaultQuartzScheduler_Worker-4" prio=5 tid=41 TIMED_WAITING
at java.lang.Object.wait(Native Method)
at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:552)
"ajp-bio-8012-exec-319" prio=5 tid=1379 TIMED_WAITING
at sun.misc.Unsafe.park(Native Method)
at java.util.concurrent.locks.LockSupport.parkNanos(LockSupport.java:226)
at java.util.concurrent.locks.AbstractQueuedSynchronizer$ConditionObject.awaitNanos(Abstract QueuedSynchronizer.java:2082)
at java.util.concurrent.LinkedBlockingQueue.poll(LinkedBlockingQueue.java:467)
at org.apache.tomcat.util.threads.TaskQueue.poll(TaskQueue.java:86)
at org.apache.tomcat.util.threads.TaskQueue.poll(TaskQueue.java:32)
at java.util.concurrent.ThreadPoolExecutor.getTask(ThreadPoolExecutor.java:1068)
at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1130)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:615)
at java.lang.Thread.run(Thread.java:744)
"DestroyJavaVM" prio=5 tid=89 RUNNABLE
"ajp-bio-8012-exec-331" prio=5 tid=1438 TIMED_WAITING
at sun.misc.Unsafe.park(Native Method)
at java.util.concurrent.locks.LockSupport.parkNanos(LockSupport.java:226)
at java.util.concurrent.locks.AbstractQueuedSynchronizer$ConditionObject.awaitNanos(Abstract QueuedSynchronizer.java:2082)
at java.util.concurrent.LinkedBlockingQueue.poll(LinkedBlockingQueue.java:467)
at org.apache.tomcat.util.threads.TaskQueue.poll(TaskQueue.java:86)
at org.apache.tomcat.util.threads.TaskQueue.poll(TaskQueue.java:32)
at java.util.concurrent.ThreadPoolExecutor.getTask(ThreadPoolExecutor.java:1068)
at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1130)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:615)
at java.lang.Thread.run(Thread.java:744)
"obj-skimmer-dvinciORACLE" prio=5 tid=1019 TIMED_WAITING
at java.lang.Object.wait(Native Method)
at coldfusion.server.j2ee.pool.PoolSkimmerThread.run(PoolSkimmerThread.java:47)
at java.lang.Thread.run(Thread.java:744)
"obj-skimmer-nVision" prio=5 tid=28 TIMED_WAITING
at java.lang.Object.wait(Native Method)
at coldfusion.server.j2ee.pool.PoolSkimmerThread.run(PoolSkimmerThread.java:47)
at java.lang.Thread.run(Thread.java:744)
"ServerThread" prio=5 tid=67 RUNNABLE
at java.net.DualStackPlainSocketImpl.waitForNewConnection(Native Method)
at java.net.DualStackPlainSocketImpl.socketAccept(DualStackPlainSocketImpl.java:135)
at java.net.AbstractPlainSocketImpl.accept(AbstractPlainSocketImpl.java:398)
at java.net.PlainSocketImpl.accept(PlainSocketImpl.java:198)
at java.net.ServerSocket.implAccept(ServerSocket.java:530)
at java.net.ServerSocket.accept(ServerSocket.java:498)
at com.jnbridge.jnbcore.server.b.b.if(Unknown Source)
at com.jnbridge.jnbcore.JNBMain$a.run(Unknown Source)
"Thread-26" prio=5 tid=66 WAITING
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:503)
at coldfusion.util.SimpleThreadPool.getAssignment(SimpleThreadPool.java:113)
at coldfusion.util.SimpleWorkerThread.run(SimpleThreadPool.java:211)
"obj-skimmer-legislation" prio=5 tid=1023 TIMED_WAITING
at java.lang.Object.wait(Native Method)
at coldfusion.server.j2ee.pool.PoolSkimmerThread.run(PoolSkimmerThread.java:47)
at java.lang.Thread.run(Thread.java:744)
"ajp-bio-8012-exec-299" prio=5 tid=1349 TIMED_WAITING
at sun.misc.Unsafe.park(Native Method)
at java.util.concurrent.locks.LockSupport.parkNanos(LockSupport.java:226)
at java.util.concurrent.locks.AbstractQueuedSynchronizer$ConditionObject.awaitNanos(Abstract QueuedSynchronizer.java:2082)
at java.util.concurrent.LinkedBlockingQueue.poll(LinkedBlockingQueue.java:467)
at org.apache.tomcat.util.threads.TaskQueue.poll(TaskQueue.java:86)
at org.apache.tomcat.util.threads.TaskQueue.poll(TaskQueue.java:32)
at java.util.concurrent.ThreadPoolExecutor.getTask(ThreadPoolExecutor.java:1068)
at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1130)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:615)
at java.lang.Thread.run(Thread.java:744)
"scheduler-0" prio=5 tid=21 RUNNABLE
at java.lang.Thread.getStackTrace(Thread.java:1588)
at coldfusion.monitor.stack.J5StackTrace.getAllStackTraces(J5StackTrace.java:39)
at coldfusion.monitor.active.Snapshot.getJavaStackTrace(Snapshot.java:606)
at coldfusion.monitor.active.Snapshot.getSnapshotData(Snapshot.java:165)
at coldfusion.monitor.active.Snapshot.dumpSnapshot(Snapshot.java:595)
at coldfusion.monitor.alert.Alert.dumpSnapshot(Alert.java:599)
at coldfusion.monitor.alert.SlowServerAlert$SlowServerAlertTask.run(SlowServerAlert.java:166 )
at coldfusion.monitor.MonitoringServiceImpl$RunnableWrapper.run(MonitoringServiceImpl.java:1 570)
at coldfusion.scheduling.ThreadPool.run(ThreadPool.java:211)
at coldfusion.scheduling.WorkerThread.run(WorkerThread.java:71)
"MulticastListener" prio=5 tid=54 RUNNABLE
at java.net.TwoStacksPlainDatagramSocketImpl.receive0(Native Method)
at java.net.TwoStacksPlainDatagramSocketImpl.receive(TwoStacksPlainDatagramSocketImpl.java:1 14)
at java.net.DatagramSocket.receive(DatagramSocket.java:786)
at coldfusion.license.g.run(Unknown Source)
"Attach Listener" prio=5 tid=5 RUNNABLE
"ajp-bio-8012-exec-326" prio=5 tid=1432 RUNNABLE
at java.net.SocketInputStream.socketRead0(Native Method)
at java.net.SocketInputStream.read(SocketInputStream.java:152)
at java.net.SocketInputStream.read(SocketInputStream.java:122)
at org.apache.coyote.ajp.AjpProcessor.read(AjpProcessor.java:319)
at org.apache.coyote.ajp.AjpProcessor.readMessage(AjpProcessor.java:445)
at org.apache.coyote.ajp.AjpProcessor.process(AjpProcessor.java:132)
at org.apache.coyote.AbstractProtocol$AbstractConnectionHandler.process(AbstractProtocol.jav a:539)
at org.apache.tomcat.util.net.JIoEndpoint$SocketProcessor.run(JIoEndpoint.java:298)
at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1145)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:615)
at java.lang.Thread.run(Thread.java:744)
"ajp-bio-8012-exec-332" prio=5 tid=1441 WAITING
at sun.misc.Unsafe.park(Native Method)
at java.util.concurrent.locks.LockSupport.park(LockSupport.java:186)
at java.util.concurrent.locks.AbstractQueuedSynchronizer$ConditionObject.await(AbstractQueue dSynchronizer.java:2043)
at java.util.concurrent.LinkedBlockingQueue.take(LinkedBlockingQueue.java:442)
at org.apache.tomcat.util.threads.TaskQueue.take(TaskQueue.java:104)
at org.apache.tomcat.util.threads.TaskQueue.take(TaskQueue.java:32)
at java.util.concurrent.ThreadPoolExecutor.getTask(ThreadPoolExecutor.java:1068)
at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1130)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:615)
at java.lang.Thread.run(Thread.java:744)
"MulticastListener" prio=5 tid=59 RUNNABLE
at java.net.TwoStacksPlainDatagramSocketImpl.receive0(Native Method)
at java.net.TwoStacksPlainDatagramSocketImpl.receive(TwoStacksPlainDatagramSocketImpl.java:1 14)
at java.net.DatagramSocket.receive(DatagramSocket.java:786)
at coldfusion.license.g.run(Unknown Source)
"MulticastListener" prio=5 tid=52 RUNNABLE
at java.net.TwoStacksPlainDatagramSocketImpl.receive0(Native Method)
at java.net.TwoStacksPlainDatagramSocketImpl.receive(TwoStacksPlainDatagramSocketImpl.java:1 14)
at java.net.DatagramSocket.receive(DatagramSocket.java:786)
at coldfusion.license.g.run(Unknown Source)
"obj-skimmer-dev_DNADay" prio=5 tid=1013 TIMED_WAITING
at java.lang.Object.wait(Native Method)
at coldfusion.server.j2ee.pool.PoolSkimmerThread.run(PoolSkimmerThread.java:47)
at java.lang.Thread.run(Thread.java:744)
"AWT-Windows" prio=6 tid=202 RUNNABLE
at sun.awt.windows.WToolkit.eventLoop(Native Method)
at sun.awt.windows.WToolkit.run(WToolkit.java:299)
at java.lang.Thread.run(Thread.java:744)
"MulticastListener" prio=5 tid=60 RUNNABLE
at java.net.TwoStacksPlainDatagramSocketImpl.receive0(Native Method)
at java.net.TwoStacksPlainDatagramSocketImpl.receive(TwoStacksPlainDatagramSocketImpl.java:1 14)
at java.net.DatagramSocket.receive(DatagramSocket.java:786)
at coldfusion.license.g.run(Unknown Source)
"ajp-bio-8012-exec-339" prio=5 tid=1479 TIMED_WAITING
at sun.misc.Unsafe.park(Native Method)
at java.util.concurrent.locks.LockSupport.parkNanos(LockSupport.java:226)
at java.util.concurrent.locks.AbstractQueuedSynchronizer$ConditionObject.awaitNanos(Abstract QueuedSynchronizer.java:2082)
at java.util.concurrent.LinkedBlockingQueue.poll(LinkedBlockingQueue.java:467)
at org.apache.tomcat.util.threads.TaskQueue.poll(TaskQueue.java:86)
at org.apache.tomcat.util.threads.TaskQueue.poll(TaskQueue.java:32)
at java.util.concurrent.ThreadPoolExecutor.getTask(ThreadPoolExecutor.java:1068)
at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1130)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:615)
at java.lang.Thread.run(Thread.java:744)
"Finalizer" prio=8 tid=3 WAITING
at java.lang.Object.wait(Native Method)
at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:135)
at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:151)
at java.lang.ref.Finalizer$FinalizerThread.run(Finalizer.java:189)
"worker #0" prio=5 tid=68 WAITING
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:503)
at com.jnbridge.jnbcore.server.b.c.run(Unknown Source)
at java.lang.Thread.run(Thread.java:744)
"DefaultQuartzScheduler_Worker-6" prio=5 tid=43 TIMED_WAITING
at java.lang.Object.wait(Native Method)
at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:552)
"MulticastListener" prio=5 tid=50 RUNNABLE
at java.net.TwoStacksPlainDatagramSocketImpl.receive0(Native Method)
at java.net.TwoStacksPlainDatagramSocketImpl.receive(TwoStacksPlainDatagramSocketImpl.java:1 14)
at java.net.DatagramSocket.receive(DatagramSocket.java:786)
at coldfusion.license.g.run(Unknown Source)
"MulticastListener" prio=5 tid=53 RUNNABLE
at java.net.TwoStacksPlainDatagramSocketImpl.receive0(Native Method)
at java.net.TwoStacksPlainDatagramSocketImpl.receive(TwoStacksPlainDatagramSocketImpl.java:1 14)
at java.net.DatagramSocket.receive(DatagramSocket.java:786)
at coldfusion.license.g.run(Unknown Source)
"Timer-1" prio=5 tid=15 WAITING
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:503)
at java.util.TimerThread.mainLoop(Timer.java:526)
at java.util.TimerThread.run(Timer.java:505)
"ajp-bio-8012-exec-344" prio=5 tid=1487 TIMED_WAITING
at sun.misc.Unsafe.park(Native Method)
at java.util.concurrent.locks.LockSupport.parkNanos(LockSupport.java:226)
at java.util.concurrent.locks.AbstractQueuedSynchronizer$ConditionObject.awaitNanos(Abstract QueuedSynchronizer.java:2082)
at java.util.concurrent.LinkedBlockingQueue.poll(LinkedBlockingQueue.java:467)
at org.apache.tomcat.util.threads.TaskQueue.poll(TaskQueue.java:86)
at org.apache.tomcat.util.threads.TaskQueue.poll(TaskQueue.java:32)
at java.util.concurrent.ThreadPoolExecutor.getTask(ThreadPoolExecutor.java:1068)
at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1130)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:615)
at java.lang.Thread.run(Thread.java:744)
"scheduler-3" prio=5 tid=795 TIMED_WAITING
at java.lang.Object.wait(Native Method)
at coldfusion.scheduling.Scheduler.createRunnable(Scheduler.java:132)
at coldfusion.scheduling.ThreadPool.createRunnable(ThreadPool.java:138)
at coldfusion.scheduling.WorkerThread.run(WorkerThread.java:68)
"customcache.data" prio=5 tid=101 TIMED_WAITING
at sun.misc.Unsafe.park(Native Method)
at java.util.concurrent.locks.LockSupport.parkNanos(LockSupport.java:226)
at java.util.concurrent.locks.AbstractQueuedSynchronizer$ConditionObject.awaitNanos(Abstract QueuedSynchronizer.java:2082)
at java.util.concurrent.ScheduledThreadPoolExecutor$DelayedWorkQueue.take(ScheduledThreadPoo lExecutor.java:1090)
at java.util.concurrent.ScheduledThreadPoolExecutor$DelayedWorkQueue.take(ScheduledThreadPoo lExecutor.java:807)
at java.util.concurrent.ThreadPoolExecutor.getTask(ThreadPoolExecutor.java:1068)
at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1130)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:615)
at java.lang.Thread.run(Thread.java:744)
"ajp-bio-8012-exec-348" prio=5 tid=1494 TIMED_WAITING
at sun.misc.Unsafe.park(Native Method)
at java.util.concurrent.locks.LockSupport.parkNanos(LockSupport.java:226)
at java.util.concurrent.locks.AbstractQueuedSynchronizer$ConditionObject.awaitNanos(Abstract QueuedSynchronizer.java:2082)
at java.util.concurrent.LinkedBlockingQueue.poll(LinkedBlockingQueue.java:467)
at org.apache.tomcat.util.threads.TaskQueue.poll(TaskQueue.java:86)
at org.apache.tomcat.util.threads.TaskQueue.poll(TaskQueue.java:32)
at java.util.concurrent.ThreadPoolExecutor.getTask(ThreadPoolExecutor.java:1068)
at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1130)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:615)
at java.lang.Thread.run(Thread.java:744)
"Thread-25" prio=5 tid=65 WAITING
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:503)
at coldfusion.util.SimpleThreadPool.getAssignment(SimpleThreadPool.java:113)
at coldfusion.util.SimpleWorkerThread.run(SimpleThreadPool.java:211)
"worker #2" prio=5 tid=70 WAITING
at java.lang.Object.wait(Native Method)
at java.lan

I'm pretty sure the problem here is somehow related to my other post, but for shites and grins I would still like to know how I can receive a Slow Server alert when no actual page requests are running and it says there are 0 open connections to any of the datasources.

Open Connections on database

I would like to know the number of open connections from OAS to database. I quired v$session and v$session_connect_info, this gives number of active, inactive sessions.
We have Java memory leak on OAS, so I would like to investigate connection pooling.
Thanks
Rashidah

ted_hankey wrote:
Our corresponding DB2 driver logs show these 3 connections, as well as another 5 that are opened but not closed. These 5 connections that remain open do not perform any operation against the database.
How could this be, seeing as the connections are not displaying in my java.sql logging? The DB2 tracing is only turned on for my application so there is no other application creating these connections.Seems to me like the driver already has some sort of mini-pooling mechanism built in, which would be invisible to the JDBC layer. I would investigate DB2 specific driver properties, usually you can find some clues there for driver specific features. If what I guess is correct then there must be a way to control this pooling behavior.

Firefox won't open/connect tp the internet. Explorer opens and connects. Windows firewall turned off. No other antivirus program running. Happened when I downloaded new Firefox update.

Firefox won't open/connect tp the internet. Explorer opens and connects. Windows firewall turned off. No other antivirus program running. Happened when I downloaded new Firefox update.

I had the same problem when i dl-ed a new anti-virus softward, but what I did help me reconnect Firefox again!
Here is what I did,
Go to open firefox browser-->option-->advanced-->network-->settings-->and change it to auto-detect proxy settings for this network!
It worked for you, hope it will work for you too =)!
Cheers

Telnet not working i need help : Could not open connection to the host !!

hello all im back today with big problem with telnet i dont know why !!
i have to computers one of them in my home and the other one in my office both of them use windows 7 so
home PC internet IP : 82.205.100.161
office PC internet IP : 82.102.237.175
so i go to control panel and then to windows features and i check Telnet Client and Telnet server
then i turn off my firewall
then i start telnet service
then i execute netstat -ab to know telnet port :
[tlntsvr.exe]
TCP [::]:135 Hacker-HP:0 LISTENING
is there anythink i need to do to get that damn connection over internet NOT LAN !! pleaze help me i still get this sucks error : Could not open connection to the host
peace
Dr.BL@CKDeaTH

Hi,
Telnet server use TCP port 23 by default.
Here is a screenshot of my lab server,
To verify if the TCP port 23 has been opened, we can use the portqry tool.
Here is the download link,
http://www.microsoft.com/en-us/download/details.aspx?id=17148
Best Regards.
Steven Lee
TechNet Community Support

Business Objects Open Connectivity Configuration in Universe Connection

Friends,
i'm trying to create a Universe based on a flat file. I found out this Business Objects Open Connectivity (in Generic Sources) to use files as sources.
But I'm not sure how to use it? Can anyone help with this or share a doc how to use this functionality?

Hi BHARATH C S ,
Follow the below steps.
1. Save the Excel in Local disk.
2. Go to Start>>Control Panel>>Administrative tools>Data Sources(ODBC)
3. Select System DSN>>Add>>Microsoft excel Driver(*.xls)
4. Give a new data source name and click on 'Select workbook' and point the saved excel sheet and click on OK
5. Create a new connection in Universe designer by using the Generic ODBC connection
6. Create a new universe and insert the table which we have defined in the Excel sheet.
If this solve your issue then Mark the answer as a correct.
Regards,
Anish

Error in Crystal report( built on Universe) preview in CMC - Failed to load DB credentials or Failed to open Connection

Hi,
      I created a Crystal Report (CR XI r2) using Universe and database is Db2.
     My report is working fine in Crystal report ,.But when i am uploading this report (Save AS ->enterprise) to repository ,and then trying to preview this report from CMC/Infoview,it throws error "Failed to load DB credentials "or sometimes it throws" Failed to open Connection" .
I have given DB user credentials correctly and used both option "prompt user for DB logo" as well as "use same database logon" .
I am not sure why it is throwing this error.I checked both "Bo server machine as well as Client machine ,both are having DB2 cleint installed and configured.
Is this an issue with Service Packs ?
As my machine configuration is -
     BO Client - BO XI R2 RTM + SP1+SP2
     BO Server (Linux) - BO XI R2 RTM
If anybody faces the same issue ,please share the solution with me,as it is very urgent .
Thanks
Nitin

Hello,
Thank you for your post.
Based on your description, your issue is out of support of VS General Question forum which mainly discusses
WPF & SL designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help System
and Visual Studio Editor.
I suggest that you can consult your issue directly on SAP Crystal Reports:
http://scn.sap.com/community/crystal-reports/content?filterID=content~objecttype~objecttype[thread]
  for better solution and support.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Install stops. Log reads "Idle 40min with 1 open connection"

OK, I've tried this nearly a dozen different times and ways. Install begins normally and shortly after "calculating time remaining" changes to an actual time, the installation stops. The Installer is still running, but no progress occurs. The log file shows "localhost installdb [414]: idle 10min with 1 open connection"
The [414] number changes during different attempts, and every 10 minutes a new entry occurs. "idle 20min, idle 30min, idle 40min", etc. It goes on like this for hours until I quit/restart the Installer.
Now for the basics: Titanium PB running updated version of Tiger. 1Gig of RAM ... original Apple, installed at the factory. No peripherals attached. Have tried upgrade, archive and install, and erase and install.
I have also tried to install just the required files (no languages, printer drivers, or x11). I have run disk first aid, and there are no problems on my drive.
The DVD has been checked at the start of several (but not all) of the install attempts and all have passed.
The only thing that might be different/unusual about my computer is that I replaced my optical drive (original combo drive) with a new dual-layer dvd combo drive. But it was guaranteed to be Apple-certified. It's model MATSHITA DVD-RAM UJ-85JS.
Tomorrow I'll try to install using it in target-disk mode, but in the meantime, I thought I'd see if anybody else has any other ideas.
Thanks.

I suspect the drive, but you might see if the DVD is dirty or has a thin oily film on it. Some have had this problem, and cleaning it made it work.

ASA 5550 Open Connections Increase

Similar Messages

Maybe you are looking for