ASA 5585x IPS Service Contract CON

Dear all
actually i'm looking for the IPS contract support for ASA5585 (SSP IPS), i found two type of this from internet with details below:
CON-SNT-AS82S10K - SMARTNET 8X5XNBD ASA5580-20-10K-K9
CON-SUO1-A8S2P2S9 - IPS SVC, ONSITE NBD ASA 5585-X w/SSP20,,IPS SSP-20,16GE,10K
could please someone tell me about different between this two

Hello,
You can always check with the Cisco Sales representative to get more information. Normally those guys are the ones that can provide you more details in regards of Entitlement informaiton.
Mike

Similar Messages

Cisco IOS based IPS Services Licensing Query

Hi Experts,
We have a Cisco 3945 router at one of our location. Our requirement is to enable the IOS based IPS engine within in the router and would like to load new signature files from cisco website to the router. But i am not much familiar with the licensing part. show version and show ip ips license output has been attached for the reference. Following are my queries.
1) Is this platform and IOS is capable for enabling IPS Engine?
2) Is there any extra IPS Services Contract is required (other than the smartnet Coverage) for this router to enable IPS engine and to load new IPS Signature files from Cisco?
Advanced Thanks and Regards,
Sihanu N

1) Is this platform and IOS is capable for enabling IPS Engine?
Yes, it is (3945 with a security IOS image will be able to do it)
2)Is there any extra IPS Services Contract is required (other than the smartnet Coverage) for this router to enable IPS engine and to load new IPS Signature files from Cisco?
No, you are good to go.
I will write a future articule about how to enable this feature on an IOS router so stay tune in my website at http:laguiadelnetworking.com for further information as I will cover all of the details,
Cheers,
Julio Carvajal Segura

[HA]ASA with FirePOWER Services with [HA]FireSIGHT Management Center

Hi,
My Customer orders the following SKUs in one to make these ASA with FirePOWER Services as H/A.
Line
Number
Item Name
Description
Service
Duration
Lead
Time
Included
Item
Quantity
ListPrice
Extended
ListPrice
Discount
Selling
Price
1.0
ASA5515-FPWR-K9
ASA 5515-X with FirePOWER Services 6GE AC 3DES/AES SSD
N/A
14 days
No
2
2.0
L-ASA5515-TAMC=
Cisco ASA5515 FirePOWER IPS AMP and URL Licenses
N/A
0 days
No
2
2.0.1
L-ASA5515-TAMC-1Y
Cisco ASA5515 FirePOWER IPS AMP and URL 1YR Subs
12 month(s)
N/A
No
2
Assuming from my experiences, 2 PAKs are supposed to be issued.
PAK_A : 1 PAK for ASA5515-CTRL-LIC (Entitlement Qty:2)
PAK_B: 1 PAK for L-ASA5555-TAMC= (Entitlement Qts:2)
Also these FireSIGHTs which monitors these ASAs are H/A.
The SKUs of FireSIGHTs are following:
-FS1500-K9
-FS1500-BASE-K9
In this case, I assume that these steps are necessary for generating licenses for ASA with FirePOWER Servies;
Go to license page ( www.cisco.com/go/license) and input PAK_A. Then following the steps and on “Add Device”section, should I input the following 3 devices license keys ?
-Another ASA5515-FPWR-K9
-FS1500-K9
-FS1500-BASE-K9
And then 2 licenses which are one is for FS1500-K9 and the other is for FS1500-BASE-k9 are to be generated.
*I have to do that same operation for PAK_B.
Q1: Is this right? Do I understand the steps correctly ?
Q2 :If the answer for Q1 is Yes, does it mean that any license is not required for ASA with FirePOWER services ?

Hi,
For the PIDs "ASA5515-CTRL-LIC" and "L-ASA5555-TAMC=" you will be provided with PAKs.
If you are trying to setup HA please check on the forum link for HA setup, https://supportforums.cisco.com/discussion/12320876/how-can-i-make-my-license-high-availabilityor-ha-license
Steps to register the PAK,
1) Login to License portal ( www.cisco.com/go/license) with CCO ID
2) Enter the PAK to register, click NEXT
3) Enter the license key of the FireSight device (like FS1500) and if you want to add more devices for HA click on ADD device
4) enter the license key of the second FireSIGHT for HA, click NEXT
5) Agree to the terms and SUBMIT
6) email with the licenses will be sent

Comment téléchager l'IOS d'un Router sans le Service Contract:

Bonjour à tous,
Je travaille pour une organisation humanitaire au Tchad, à la frontière avec le Soudan en vue d'apporter de l'aide aux réfugiés soudanais du Darfour. J'ai reçu il y a quelques jours des routers CISCO 881SRST et j'ai besoin d'un IOS.
J'essaie de le téléchager depuis maintenant trois jours sans succès car je n'ai pas de Service Contract, je suis juste en charge du service informatique et télécoms sur le terrain, alors que les achats sont faits depuis Genève par une personne que je ne connais pas.
Quelqu'un pourrait-il me dire comment faire pour en avoir un? où encore comment pouvoir télécharger cette IOS autrement?
Je reste à votre écoute et merci à l'avance.
Joël Etoundi.

uneprincesse wrote:
comment je peux faire pour retrouner à l'iOS d'avant sans perdre toute mes appli,photos,contacts,musique,SMS, etc?
Il ne se peux pas retourner a un version d'avant.

IPS Services for ASA5512-X

Hi, I already have an ASA5512-X and would like to implement IPS. I'm aware of the license needed, however I cannot find anything that says if I need the subscription service. The IPS bundle says it includes the service, but there seems to be a contract number for the 5512-X IPS service. Do I need to purchase the IPS Services or will the IPS license include as such.
Thanks in advance
Steve

Are you asking if the IPS portion can be enable with out a subscription?
I am not sure if this answers your question but the 5512-x that I manage was purchased with the CX/IPS license for x-years of updates.
If it makes a difference I also used to manage a 5510 with the IPS module with no subscription. It always bothered me because that is like running an antivirus software with no updates.

Need a service contract?

I'm told I need a service contract for a UC540 that was purchased only a few months ago. I sort of assumed that for at least the first year of ownership I'd be entitled to updates, but that is not the case?
Any idea how to get a service contract that will allow me to get updates w/o spending any more money than I absolutely have to? So far all the support I've required has come from these forums, so I don't want to spend a lot more money than I have to.
I called Cisco and they said to just call a reseller, and that there aren't any part #'s. But there HAS to be a part number or two, right?
The more I try this Cisco stuff, the more I realize I should have stayed with the Asterisk-based solutions. Pretty disgusted with this approach.

Hello,
If you don't have a contract it can cause issues downloading the software from the Cisco.com site, but you can download software from the support forums without a contract. Here is the warrany information that comes with the UC and no contract:
Warranty Information
The Cisco Unified Communications 540 has 1 year of hardware support and 90 days of software support though the Small Business Support Center.
Find detailed warranty information on Cisco.com at the Product Warranties page
http://www.cisco.com/en/US/products/prod_warranties_listing.html .
Full Datasheethttp://www.cisco.com/en/US/prod/collateral/voicesw/ps6788/vcallcon/ps7293/data_sheet_c78-554289.html
UC500 Software Download:
https://supportforums.cisco.com/docs/DOC-9829
You can look up contract part numbers here:
http://www.cisco-servicefinder.com/ServiceFinder.aspx
The contract part numbers are:
CON-SBS-SVC4 - SBS 8x5xNBD 3yr Small Business Support Svc 4
CON-SBS4-SVC1 - SBS4 24x7x4 3yr Small Business Partner Rapid Response
You will have to purchase the contract from an authorized distributor or reseller.
Thanks,
-john

Follow-up Action in Service Contract

Hi All,
I am looking for a solution on below scenario to be handled in ECC6.0
I have a service contract for providing services to a customer for an year (Jan 2009 to Dec 2009.)
In Dec 2009 i have created a service notification and Service order with reference to this contract .
Currently as of today Jan 2010 , this contract has expired but my service order / notification is still open.
I would like to know what will happen to Service notification & service order refering to this contract.
Will contract expiration drive the changes required on service notification/order or will it block for further processing.
What standard solution is available to handle such cases in SAP.
Thanking You,
sudhi

Have you tried it??
From memory it gives you a warning message stating that the contract/item are not valid, but it doesn't stop you processing the order/notification
PeteA

Creation of Sales Order and Service Contract from Inbound IDOC

Hi Experts,
My requirement is to create a Sales Order as well as a Service Contract from one Inbound IDOC. I am getting the Inbound IDOC from a third Party. The message type is ORDERS and Basic Type is ORDERS02. How ever i am using an extension type IDOC which carries all the required data for Sales Order and Service Contract. My requirement is like, to create a Sales Order first.
I have created a Z FM which is attached to the Process Code and subsequently to the message type. Inside the FM i an calling FM 'IDOC_INPUT_ORDERS' for creation of Sales Order. After that i am changing the IDOC data for the Document Type. I am changing the document type which is responsible for Contract Creation.
Then I am again calling the FM 'IDOC_INPUT_ORDERS' for creation of Contract with the help of IDOC data. But here the Contract is not getting created. It's getting failed during the Batch input session.
I need to solve this problem as soon as possible. Please help me. If there are any other options also please share.
Thanks in Advance.
Regards,
Priyabrata

Actually there is problem with BDCDATA. Inside the FM it's calling transaction with help of BDCDATA. If i am creating a Sales order or contract alone its creating successfully. But when i am trying to create both, it's retuning sy-subrc '1001' after calling the transaction on the second attempt. Is there any problem with BDCDATA like we can't handle with less time gap? Please help and give your inputs.
Regards,
Priyabrata

Creation of Service Contract from Inbound IDOC

Hi Experts,
I am using Inbound IDOC type ORDERS02 with message type ORDERS for creation of Sales Order. Now my requirement is like to create a Service Contract from that Inbound IDOC. The IDOC type contains all the data require to create a Service Contract. The scenario is like, after creation of Sales Order it will check for the corresponding Service Contract exits or not by querying on a Z table which contains all those entries.
So my idea is to create a Z Program, in which it will check for the Service Contract and will create the same by reprocessing the same IDOC or by calling some Function Module. Please suggest how shall i proceed to create a Service Contract.
Is there any way to reprocess the IDOC or to collect the Data from the IDOC segments pass them to a FM which is responsible for creation of Inbound IDOC. Please suggest if this is feasible.
Thanks in Advance.
Regards,
Priyabrata.

Actually there is problem with BDCDATA. Inside the FM it's calling transaction with help of BDCDATA. If i am creating a Sales order or contract alone its creating successfully. But when i am trying to create both, it's retuning sy-subrc '1001' after calling the transaction on the second attempt. Is there any problem with BDCDATA like we can't handle with less time gap? Please help and give your inputs.
Regards,
Priyabrata

Service Contracts Line and Header Tax amounts are not matching

Hi,
I am creating service contracts using API. Using below code i am applying price adjustments on the line. while using the below API Tax is calculated at line level and added for each line But the Tax filed on the header is not getting updated. I fwe go to front end and click on reprice then the Tax amount is added to the header(If the contract created with status 'Entered').
Please help me to fix this.
l_multi_line_tbl (0).ID := l_x_clev_rec.ID;
l_multi_line_tbl (0).price_list_id :=l_curr_price_list_id;
l_multi_line_tbl (0).lse_id := 46;
l_multi_line_tbl (0).line_pl_flag := 'Y';
l_x_return_status := NULL;
apps.oks_auth_util_pub.compute_price_multiple_line (
p_api_version
=> 1.0,
p_detail_tbl
=> l_multi_line_tbl,
x_return_status => l_x_return_status,
x_status_tbl
=> l_status_tbl);
Thanks,
Hari

not answered yet.

How to reject Line Items in a Service Contract?

Hello friends,
Can anyone help me understand how do we reject items in a Service Contract? I don't see any Reject field. Is it one of the Status I need to configure for Item Level Status Profile? Even if I add a 'Reject' status, how do I link it to Rejection Reason codes? (I know how to add Reason codes in customizing, but how they are linked to a Transaction type is something I am not finding...).
Please provide any inputs.
Thanks.

HI Navaneethan,
please try following code.
make PEKKO should be internal table with appropraite structure..
Loop at ZBTXT.
      MOVE ZBTXT-LINE TO PEKKO-ZBTXT.
      append PEKKO.
     clear PEKKO.
ENDLOOP.
loop at pekko.
write : / PEKKO-zbtxt.
endloop.
if above code is helpful, REWARD POINTS.
Regards,
Ranjith

How to know an order number from the service contracts table

Hi all,
I want to know how the order entry module and service contracts module are connected. I mean to ask if a service is placed as an order for purchase how do i get the information about the order_id or order_number from the service contracts table.
please point me in a direction so as to which tables i should be lookling at.
Thanks.

Try OKC_K_REL_OBJS table. The column JTOT_OBJECT1_CODE contains values 'OKX_ORDERHEADER' or 'OKX_ORDERLINE' and the column RTY_CODE = 'CONTRACTSERVICEORDER'. The column OBJECT1_ID1 should store order HEADER_ID or LINE_ID based on JTOT_OBJECT1_CODE value. Hope this helps.

Service Contract Determination in Follow-Up Transactions

Hi all
in our setup (CRM 2007) we can successfully create Service Orders where Contract Determination on item level takes place and assigns items to contracts. This also works for Service Confirmations, in case we create them as stand-alone transactions.
If we however create a Service Confirmation as follow-up from a Service Order, in which contract determination took place, the contract information is not contained in the Service Confirmation.
Any ideas how to get the contract information over?
Thanks!
Christian
Side note: We did not find a copy routine or copy control settings solving our problem - however we might be wrong...

Hi Christian,
If the service order line items are entittled to service contract , at each item level you will get contract info in contract data tab.
when you transfer these items to confirmation , confirmation item contract data will not have contract information. Only when you enter items in confirmation manually then system will pop up window for selection contract and confirmation items get contract information.
thanks,
Nitin

Copy button not working properly in service contract - crmd_order tcode

Hi experts,
I want to create a duplicate row in contract through Duplicate Button Supplied by SAP. As
I understand the function of the duplicate row button is to copy the same set of information in next row with auto incremental or manual. As far as number incremental is concern that is happening based on
customization on transaction type line item incremental sequence .
This is an upgrade project before upgradation it was working fine, you can check the same in old CRM 4.0. If you see in the Object Tab, condition tab or any other tab, no data is duplicated from parent line item. This works very well in CRM 4.0. Actually after discussing with the client i have come to know that , they also had the same issue before and SAP gave two Notes : 739462 and 740103 to resolve the issue. But now this feature is only availabe in the WEB UI in CRM 2007, and as i am upgrading to CRM 2007 this feature is not available, but my client want this feature.
I went through the SAP note , they have given some corrective instructions but it is valid till BBPCRM 500 version of the software component and mine is BBPCRM 600 . My query is, will it work if i follow the same corrective measures in the Note for my system ie. by inserting few blocks of code given in the SAP NOTE.
please kindly help me out,
Thank you,
Regards,
Arun.

Hi,
I think you problem is in u201CBilling tabu201D which it is not showing any details on particularly billing tab. Right
Ok, as per you wording Services order having billing tab with details but Service contract does not.
If am I right, you see the below solutionu2026.
First go to T-code: CRMC_PCUITOOLS
Put you
Application : CRMD_BUS2000116
View (blview) : ZXXXXX
Then press F8 for execute
You will see the view of particularly Leading Transaction Category and go to billing tab
See below Tab Page Group (SRV_ODP1)
Second go to T-code: CRMC_BLUEPRINT_C
Follow this : Application Element -> Tab Page Group -> Tab Page Group Structure
Put it (SRV_ODP1) and go to billing (double click on them)
You will see following details
Tab Page Group      SRV_ODP1
View                      ZXXX
Sequence                  23
Event                     S1O_HD_PAYMENT_BILL
Text                      Billing
View Switch Gro
Multi-Group               S1O_HD_PAYMENT_BILL
Inactive          Flag is Not Set
Follow the same for Service contract. You will see the Multi-Group missing
Put it same on that (S1O_HD_PAYMENT_BILL)
I think this issue will solveu2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026
On..............................................................................

Accept Button in Service Contract Quotations

Hi Experts
The requirement is to create any of the 2 different types of contracts as a follow up from service contract quotation.
I have maintained both the contract types as follow up transactions of service contract quotation through copy control. When I click on Accept button in the quotation, it doesnt show me both the contracts creation option. I know SAP doesnt recommend creating a follow up directly and even if I do it, the pop shows up both the contract types but when i create any of them, the items dont carry over.
In short, I am expecting to get two options when I click on accept but i m not getting it. Is there anything to do in Change process?
Edited by: Sunil Dangwal on Feb 24, 2011 2:51 PM

Hi,
Please read FAQ note 499722, questions 12, 13, 22 and 9.
I would advice you to check the information from note 353482.
Regards,
Edit

ASA 5585x IPS Service Contract CON

Similar Messages

Maybe you are looking for