Asa/asdm Wizard "Unified Communications Wizard"

When I try to start this wizard, I get an error mesage saying "You must have at least two interfaces to configure any of the Unified Communications Proxy Types".
I have one inside and one outside interface configured.
Why am I getting this error mesage?
Thanks,
Gary

Similar Messages

Message d'erreur lors de l'utilisation de l'outil RT communication wizard

Bonjour,
Je développe actuellement une application sur Labview RT 7.0.
Voulant créer une interface avec un module sur un PC hôte, j'utilisais l'outil RT communication Wizard.
Mais depuis le milieux de semaine, RT Communication wizard affiche un message d'erreur m'indiquant qu'il ne trouve pas de boucle dans le VI sélectionné.
"No loop was found in selected VI."
Alors que précédemment, ce message n'apparaisait pas.
Hors il y a bien une boucle While présente.
Même avec un simple VI avec qu'une boucle While, le message d'erreur apparaît
J'ai vérifié comme indique dans la page ci-dessous, que l'accès aux VIs exportés est autorisé.
http://digital.ni.com/public.nsf/allkb/7428E72E94D50DFE86256E1600129046
Je ne sais plus ou recherché des informations..
Donc je m'adresse à vous.
Merci d'avance.
A. Giard

Bonjour,
Je vous conseille d'effectuer les tests suivants:
* copier le contenu du diagramme du VI dans un VI vide et refaire le test avec le nouveau VI (il se peut que votre diagramme soit corrompu)
* faire le test avec un VI simple pour voir si le problème est lié à votre VI ou au RT Communication Wizard.
Vous utilsez LabVIEW RT 7.0 Anglais. La version de LabVIEW 7.0 est-elle en Français? Avez-vous la possibilité de tester sous RT 7.1? Si non, vous pouvez poster votre VI pour que je fasse le test.
Cordialement.
Matthieu G.
AE, NI France

Use RT Communication Wizard to build application for PDA

Hi,
I am wondering if the RT Communication Wizard can be used to build the Host, NPL and TCL VIs for PDA touch screen pocket PC model NP 606S.
I am familiar with using RT Communication Wizard to build RT set of VIs for communication between PC and cFP-2020 field point.
Now I need to go step further and develop the similar VIs, one VI (NPL along TCL) that will run on the RT Target (my field point) and Host VI that I will compile and run from PDA (NP 606S). I am using cross-over Ethernet cable (TCP communication).
If this is possible to do, are there any special instructions (rules) to complete the process properly.
Thanks in advance,
Peja

I don't use the RT comm wizard, but after generating a small sample program, my answer would be yes. The RT part is only on the RT side. Programs written using the PDA module use the TCP VIs just like regular programs and I have used them to talk with a FP, so it should work. You should keep in mind that the display on PDAs is limited (no clusters, no arrays and so on). Since, according to this, the NP 606s isn't a PDA, it's possible it will be able to display them (although I doubt it).
Try to take over the world!

RT Communication Wizard error 1055

When i use the Real Time Communication Wizard i get this message: Error 1055 occurred at Property Node in RTCW Script NPL (TCP).vi->RTCW Wizard.vi
Whats wrong??? I get this Error in every VI but i´ve already re-installed RT

This is a known and solved issue that is documented in the NI knowledgebase. Please follow this link.
Best regards
Jochen Klier
National Instruments Germany

Unified Communications traversal state failed

Hi,
I have installed two separate Virtual machines VCS-Control and VCS-Expressway (Version 8.2) on a Cisco UCS server. Both VMs are on the same subnet and connected to the LAN interface of Cisco ASA firewall (No DMZ) network. I tried to establish Unified Communications traversal zone between them as suggested in Cisco doc, MRA via Expressway Deployment-Guide-X8-2 but it is always coming up as failed. Please see my scenerio diagram as well as the config of VCS-Control and Expressway from the attached files. Any help from any one would really be appreciated.
Regards,
Ali

Is this a lab or a production environment?
If you use NAT on the VCS-E you need the dual interface option, even if you would
only use one interface. There are many postings around that here in the forum.
If NAT is done, all communication would need to go to the external NAT address.
So also for the VCS-C to VCS-E traversal zone, so the firewall has to allow that.
Often it is then more easy to deploy the VCS-E with two interfaces, one in the external DMZ
and one internal interface.
If this is a production environment you should place a firewall in between VCS-C and VCS-E.
As you specified a host name, check that the dns can be resolved and that the ip flow and
configuration is ok as mentioned above.

Wizard vs pcm wizard?

Hi,
I was reading portal developer guide about wizard creation and just wanted to know the difference between creation of "wizards" and "PCM wizards".. I didnt get the difference between them.
could some one please let me know an example of wizard and PCM wizard in the default portal implementation.
the wizard that we use for creation of iview based on PAR, what type of wizard is it (WIZARD OR PCM WIZARD)?
and the wizard that we use for creating iview based on iview template? what type of wizard is it? (WIZARD OR PCM WIZARD)
Thank you

The 2 EPM tools that inquired about are both multi-dimensional tools. I would suggest looking for detailed information on the SDN network. In the meantime, my explination of the differences in based mostly on the design of the products. PCM was initially designed for use in Cost management processes, and is a multidimensional cube with predefined dimensions and the ability to add additional dimensions for building an application. The PCM tool will take COSTs and allow them to be assigned to activitity holders, which then could be driven to other objects and eventually processes. The design is applicable to many customer opportunities to address product profitability, channnel profits, and other designs. It also has models that come predefined. It has the ability to use excel and has robust reporting design capabilities.
BPC is a user defined multidimensional application that is basically a database, stores dimensions, that are arraigned into user defined applications. The dimensions may be shared or independent between applications. The applications many server many various purposes; most often for budgeting, forecasting, planning or legal consolidations. The applications are are managed using excel, have Data Manager tools, allow you to define processes for support the application design, and are built for the user community.
This is just a simple view and an opinion, but hopefully this is a good staring point. Hope this helps.

Sorting of Dunning Wizard and Payment Wizard

Dear Development,
we have the following business situation.
1) We create a Dunning Wizard or Payment Wizard.
2) We make a printout of all selected business partner and documents in Step 5 of the DW or PW.
3) The chief decides which payments should be done.
4) We have to unslect or select the checkboxes again.
5) The problem is now, it is quite difficult to find out the correct business partner related to the printout.
We need a filter functionality or a sorting algorithm for all columns. Thanks a lot for your help.
Regards Chris

Hello Chris,
Thank you for your input. It's quite clear and reasonable. Unfortunately, sorting and filtering feature is quite difficult to implement on multi-level/hierachical grids in SAP Business One; for the time being, this logic is not supported but we will consider it for one of the next major releases.
I guess ideally the 'Find' control could help better. That we can consider as well. What do you think?
Peter Dominik
B1 Solution Management

Ask the Expert: Upgrading Cisco Unified Communications Manager (CUCM) to Version 9.1 (Drive to 9)

Welcome to the Cisco Support Community Ask the Expert conversation. Learn from experts Vijay Rao and Amit Singh about simplified upgrade process and focused support from Cisco to migrate to version 9.1.
This is a continuation of the live Webcast
Drive to 9 is a comprehensive and holistic program designed to help you upgrade the current Cisco® Unified Communications Manager installed base to version 9.1 or higher. This upgrade will enable customers to have next-generation collaboration experiences.
During the live event, Cisco subject matter experts Vijay Rao and Amit Singh focussed on the simplified upgrade process and focused support from Cisco to migrate to version 9.1. They also talked about the changes made to the licensing model of User Connect Licensing and Cisco Unified Workspace Licensing.
Vijay Rao is a Network Consulting Engineer and is currently a unified communications (UC) consultant for Bank of America. He has been providing consulting assistance to the bank for the past 6 years. He helps design complex UC networks for large enterprise customers. He was previously part of Cisco IT in the Asia Pacific, Japan, and China (APJC) region and was instrumental in designing and implementing the Bangalore campus. He has been working with Cisco for 9 years and has 12 years of UC experience. He has a Cisco CCVP® certification.
Amit Singh is a customer support engineer at the Cisco Technical Assistance Center in Bangalore, India. He has 7 years of experience in his areas of expertise: wireless, Cisco Unified Communications Manager, multiservices, Cisco Unity®, and Cisco Unified Contact Center Express. He has been involved in various escalation requests from India, Singapore, and Australia and is currently working as a technical lead for the Voice team in Bangalore, India. He is a computer science graduate.
Remember to use the rating system to let Vijay and Amit know if you have received an adequate response.
Vijay and Amit might not be able to answer each question due to the volume expected during this event. Remember that you can continue the conversation on the Collaboration, Voice and Video sub-community forum shortly after the event. This event lasts through July 19, 2013. Visit this forum often to view responses to your questions and the questions of other community members.
Webcast related links:
Webcast Video
FAQ from the live webcast
Slides from the live webcast

Hello Robert,
Apologies for a delayed response, some days get very hectic.
In CallManager, we only define the SRST reference, and CUCM version and SRST version are independent of each other.
The only thing, which is related and will change with CUCM upgrade is Phone F/w version.
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/compat/ccmcompmatr1.pdf
You may just want to check your, phone f/w compatibility with the SRST version running on your ISR G1 Gateways:
http://www.cisco.com/en/US/products/sw/voicesw/ps2169/products_device_support_tables_list.html
For Example: SRST version 7.1
http://www.cisco.com/en/US/prod/collateral/voicesw/ps6788/vcallcon/ps2169/data_sheet_c78-520521.html
You may want to do some lab testing with CUCM 9.1 and an SRST supported f/w on your phones.
If you decide to run the old Phone/F/w to support the SRST version, you may not be able to take advantage of new features.
Also, you can try and upgrade your phones(Wih CUCM 9.1) and test them with your SRST version.
It should work fine, but from a troubleshooting perspective, TAC may request you to come into a Cisco Supported combination.
Please, let me know if this clarifies your doubt or we can have a quick phone call.
Regards
Amit Singh

Ask the Cisco VIP: Troubleshooting SIP in Cisco Unified communications

Troubleshooting SIP in Cisco Unified communications deployments with Cisco VIP Ayodeji Okanlawon
This is a Q&A Ask the Expert Session continuation from the Live Webcast
Ask your questions on Session Initiation Protocol (SIP) and how it is redefining our UC world.The Session Initiation Protocol (SIP) is a signaling communications protocol, widely used for controlling multimedia communication sessions such as voice and video calls over Internet Protocol (IP) networks.
Featured Expert
Ayodeji Okanlawon, a Cisco Designated VIP, is the Lead Consultant Engineer for Global Solutions Design and Engineering at Verizon Business. In his past, he has worked at Intact IS, NCS Global, and Schlumberger Information Solutions. His experience includes development of design and deployment of large scale IP telephony projects on Cisco Call Manager platforms, Cisco Voice gateways, Cisco Jabber cloud and on premise solution. His expertise includes SIP solutions, CUBE design and Deployment, Troubleshooting: Voice gateways, CUCM, Unity connection, CUPS. Deji has been awarded the Cisco Designated VIP in 2013 and 2014. Deji holds a Bachelor of Science (BS), Electrical and Electronics Engineering, Second Class Upper from Obafemi Awolowo University.
According to Deji, “If you want to advance your career, if you’re serious about your skill sets, you’ve got to be in the forums.” (Read the Interview >>)
We look forward to your participation. This event is open to all, including partners.
* * Remember to use the rating system to let Deji know if you have received an adequate response. * *
Deji might not be able to answer each question due to the high volume expected during this event. This event runs January 13 through January 23, 2015. Visit this forum often to view responses to your questions and the questions of other community members.

Derrick,
RFC 3261defines ways to provide increased security for a SIP session.
The following describes areas in SIP that provides security for the protocol
1. Authenticating users.
We need to authenticate a user to ensure that the sender of the message is who he claims to be.
To achieve this SIP uses digest authentication between a UAC, proxy and a UAS. This provides the most basic level of authentication challenge between a client, proxy and a server.
2. Secure SIP signalling
The next area we can secure is SIP signalling itself. For this we use SSL/TLS. This is similar to using https in web browsers. With TLS before our any signalling is exchange X.509 certificates are used create a secure TLS channel. All our SIP messages are then transported within the secure channel.
NB: The digest authentication mentioned above for authenticating a user agent is just authentication. The messages are not protected from reading or modification hence it is recommended that these messages are carried inside a secure TLS channel for better security.
3. Privacy and Identification
Additional security features in SIP provides means where any user can choose to either reveal or conceal his identity.
4.Secure RTP
SIP also provides the ability to secure the media channel. It is not enough to secure signalling while anyone can listen to the media. RFC3830 discusses how the encryption should be done.
5. S/MIME
S/MIME encapsulation is used to protect sip headers making it impossible for any one in between the sender and receiver to modify the sip headers
Regards

Ordering new 8.6 Unified communications manager

Hi everybody,
For the next year I'm going to order a new CUCM 8.6 system as replacement our old CallManager. I trying now to make a order list. We have 300 ip phones 7911,7941,7960,7970. Please help me out here, I've made this list, correct me if i'm wrong.
1. CUCM-USR-LIC
2. R-CUCM-USR-LIC
3. MCS-7816-I5-IPC1
4. UCM-7816-86
5. UCM-7816-86-KIT
6. UCSS-UCM
I know that it comes with starter license of 50 DLUs. After installation I can find out exactly DLUs number to order. Is it enough for me?
thanks.

Guys I've made a list with dynamic configuration tool. Is it correct? Please I need your advice. Is it enough?
Product
Description
Quantity
CUCM-USR-LIC
Top Level Sku For User License
1
LIC-CUCM-USR-A
Unified Communications Manager Enhanced Single User-Under 1K
300
UCSS-UCM-1-1-A
UC Manager Enh UCSS Less than 1K users - 1 user - 1 year
300
LIC-CUCM-BASIC-A
Unified Communications Manager Basic Single User-Under 1K
300
UCSS-UCM-BAS-1-1-A
UC Manager Basic UCSS Less than 1K users - 1 user - 1 year
300
UCM-7816-86-XU
CUCM 8.6 7816 Export Unrestricted Media Kit
2
CCX-85-CMBUNDLE-K9
CCX 8.5 Promo Bundle available only with NEW CUCM or BE6000
1
CUCM-PAK
Include PAK Auto-expanding PAK for CUCM
1
CUCM-USR
Include PAK Auto-expanding User for CUCM
3000
UCM-7816-86-KIT-XU
CUCM Auto-Expansion Media Kit
1
UCM-7816-NODE
CUCM 7816 Node
2
UCSS-UCM-BASIC-PAK
Include PAK Auto-expanding UCSS Basic PAK for CUCM
1
UCSS-UCM-PAK
Include PAK Auto-expanding UCSS PAK for CUCM
1

What is Cisco netManager-Unified Communications 1.0?

I want to know if this software let me add, change, manage extension in the CUCM6 platform or is just to monitor and diagnostic.
Thanks.

Hi Rafael,
Hope you are doing well :) You are most correct! Here are the various management for Unified Communications;
Cisco netManager - Unified Communications 1.0 provides simple, ready-to-use monitoring and diagnostics for small and medium sized deployments (up to 1000 users) of the Cisco Unified Communications System.
Key Features:
Monitors and evaluates the status of all the key components of a Cisco Unified Communications System, including the underlying transport infrastructure
Presents the current status of the system through service-level views of the network and provides contextual tools to view current alert status and historical information
Increases network manager productivity and speeds trouble-shooting by providing contextual diagnostic tools and easy one-click access to embedded device management systems
Provides current information about connectivity- and registration-related outages affecting all IP phones in the system and provides additional contextual information for location and identification of the phones
http://www.cisco.com/en/US/products/ps7243/index.html
Cisco Unified Operations Manager 2.0
provides a real-time, service-level view of the entire Cisco Unified Communications system and presents the current operational status of each element. It continuously monitors the different elements such as Cisco Unified CallManager, Cisco Unified CallManager Express, Cisco UnityÂ® systems, Cisco Unity Express, Cisco Unity Connection, Cisco Unified Contact Center, Cisco Unified Contact Center Express, Cisco Unified Presence Server, Cisco Emergency Responder, and Cisco Unified MeetingPlaceÂ® Express, as well as Cisco gateways, routers, switches, and IP phones.
http://www.cisco.com/en/US/prod/collateral/netmgtsw/ps6491/ps6705/ps6535/ps7121/prod_bulletin0900aecd805800c0.html
You would probably be looking for something like this;
Cisco Unified Provisioning Manager 1.2
http://www.cisco.com/en/US/prod/collateral/netmgtsw/ps6491/ps6705/ps7125/ps8771/prod_qas0900aecd80709f1e.html
Hope this helps!
Rob

Ask the Expert : Call Recording with Cisco Unified Communication Manager (UCM)

Welcome to the Cisco Support Community Ask the Expert conversation. This is an opportunity to learn and ask questions about Cisco Unified CM call recording solution that provides the ability to record customer conversations for compliance purpose. This topic will cover an overview, configuration and troubleshooting of the call recording feature.
Monday, January 19th, 2015 to Friday, January 30th, 2015
Harmit Singh is a technical leader with the High Touch Technical Services (HTTS) and Technical Assistance Center (TAC) Unified Communications teams based in Bangalore. He has broad experience in Cisco Unified Communications infrastructure solutions. He has 10 years of experience working with large enterprise and service provider networks. He also holds CCIE certifications (#20012) in Voice and Collaboration as well as Red Hat and VMware certifications.
Mohammed Noorulla Khan is a customer support engineer in High-Touch Technical Services (HTTS) Unified Communications teams based in Bangalore. His areas of expertise include Cisco Unified Communications Manager, Gateways, and Jabber. He has over 6 years of industry experience working with large enterprise and service provider networks. He also holds CCIE certifications (#35741) in Voice and VMware certifications.
** Remember to use the rating system to let Mohammed and Harmit know if you've received an adequate response. **
Because of the volume expected during this event, the experts might not be able to answer every question. Remember that you can continue the conversation in the Collaboration, Voice and Video community, subcommunity, IP Telephony, shortly after the event. This event lasts through January 30th 2015. Visit this forum often to view responses to your questions and those of other Cisco Support Community members.

Hi Maheshwar,
Thank you for your query. Please find my response below:
1> Do we support recording with HCS environment and which 3rd party vendors are validated with HCS based call control 10.1.1?
Answer: Whether you use a standalone UCM cluster, UCCE or HCS, call recording would be supported across the board in the same manner.
Please refer to the following link:
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cust_contact/contact_center/hcs-cc/10_0_1/Install_and_Config/CHCS_BK_ICC270D0_00_installing-and-configuring-cisco-hcs/CHCS_BK_ICC270D0_00_installing-and-configuring-cisco-hcs_chapter_011.html#CHCS_RF_T1105284_00
Option
Notes
Recording
All Recording applications that are supported by Unified CCE are supported on HCS for CC. For details, see Recording section in Agent and Supervisor Capabilities.
With respect to which 3rd party vendors have been validated, marketplace.cisco.com is a good place to crosscheck this info. You will find a Cisco Compatible Logo against the partners listed there. The logo is used to signify that the PARTNER product has undergone technical interoperability testing with the Cisco product specified. The interoperability testing is conducted by a third party laboratory based on testing criteria set forth by Cisco. PARTNER is solely responsible for the support and warranty of its product. Placement of the PARTNER product or information pertaining thereto, on the Cisco Marketplace website does not constitute an offer to sell the PARTNER product in any way. For further information on the PARTNER products, please visit the PARTNER company website.
Please refer to the following link and use the search field under Collaboration Technology:
https://marketplace.cisco.com/catalog/search?utf8=%E2%9C%93&search[q]=&search[technology_category_ids]=23%2C24%2C197%2C1940%2C1941%2C1921%2C1576%2C1897%2C1983%2C2418%2C26%2C198%2C1904&search[order]=tier&per_page=20&_=1421663854257&ts=1421663855441
2> Which end points are supported for recording via HCS call control?
Answer: The following link should help clarify this:
http://solutionpartner.cisco.com/web/sip/wiki/-/wiki/Main/Unified+CM+Silent+Monitoring+Recording+Supported+Device+Matrix
Please let us know if you have any follow up questions. Hope this is helpful.
Regards,
Harmit Singh.

Unified communication certificates (UCC) : SSSLERR_SERVER_CERT_MISMATCH

Hello ,
We are using UCC (unified communication certificates) which allows us
to include multiple domains controlled in a single certificate.
http://help.godaddy.com/article/3908
We are trying to setup a secure connection from SAP ECC6 (Abap stack
7.01 SPS6) to the adress : https://serverA
When using IE, and examining the certificate installed at this adress, CN=serverB,
which contains several domains including serverA.
The ICM is in the client role
The following entry is displayed in the trace:
[Thr 1] Tue Jun 28 15:30:06 2011
[Thr 1] TRACE FILE TRUNCATED
[Thr 6] Tue Jun 28 15:30:14 2011
[Thr 6] MatchTargetName
("serverA", "CN=serverB OU=Global IT, O=****, L=****, C=FR") FA
[Thr 6] SSL NI-sock: local=160.92.204.42:53988 peer=160.92.209.8:443[Thr 6] <<- ERROR: SapSSLSessionStart(sssl_hdl=0x6000000005ce4510)
==SSSLERR_SERVER_CERT_MISMATCH
[Thr 6] *** ERROR => IcmConnInitClientSSL: SapSSLSessionStart failed (-30): SSSLERR_SERVER_CERT_MISMATCH [icxxconn_m
There is apparently a certificate mismatch issue, SAP ICM is expecting
the CN to be "serverA", instead of "serverB"
I had a look at sap note "Note 1318906 - Trace analysis of SSL
problems" which states that
"the certificate that is returned by the server is issued for a
different server name and is therefore rejected"
But by definition, when using UCC, several domains and hostnames are
secured within one CN. It means that serverA domain is
included in CN=serverB
Therefore when accessing the application with IE, there are no errors.
Is there an option on SAP ECC to be able to handle such certificates?
Thank you very much for your help.
Best Regards.

Hi Susan,
Please check the links with the same issue:
Adapter URL - hostname vs FQDN
Error using HTTPS
Internal Server Error in PI 7.1
Regards,
Naveen

What do you feel is lacking in Unified Communications today?

Our product development team knowswhat they're seeing as lacking in UC,and are curious to learn what others think.Right now what we see as the biggest thing lacking is the strategy surrounding Unified Communications (UC). Decision makers and IT directors have many different applications that they offer to their end users, but the biggest challenge is in formulating a strategy around what they’re offering to various functional areas in their business in a way that makes is easy for them to use. There are many different applications and silos of applications all running on the desktop at the same time; offering them in a seamless fashion to end users is the crux of the strategy, so there is a high rate of user adoption. We wrote a whole blog post on this topic, click here if you want to read it ...
This topic first appeared in the Spiceworks Community

Hello,
Based on your description, you can try to use SQL Server 2012 Express LocalDB.
LocalDB is created specifically for developers. It is very easy to install and requires no management, but it offers the same T-SQL language, programming surface and client-side providers as the regular SQL Server Express.
SQL Server LocalDB can work with Entity Framework and ADO.NET Syc Framework. However, there is no built-in encryption feature in LocalDB which
can let you encrypt database. You should decrypt/encrypt data on your own, for example, using
Cryptographic Functions
Reference:SQL Express v LocalDB v SQL Compact Edition
Regards,
Fanny Liu
If you have any feedback on our support, please click here.
Fanny Liu
TechNet Community Support

Broken Cisco Unity / Unified Communications Manager association

We have several Cisco Unity Connection users with the following status in their profiles:
"This user's association to the co-resident Cisco Unified Communications Manager user has been broken.
Please Click Here to reassociate the orphaned user."
Clicking on the reassociation button does not show any of the users with broken associations, just a few resource users.
Is there any way to reassociate these users with CUCM without having to delete them in Unity Connection along with their mailboxes?

These are the steps I took to resolve the issue. I was particularly concerned about users losing saved messages in their voicemail. The posted solution did not give much detail on what to do.
1) Create a new user in CUCM. For example, I have a user called 'John Doe' in the system. I created a new one called 'John Doe2'.
2) After creating the user I associated 'John Doe2' to the phone in use by 'John Doe'. Then I set the Primary Extension as needed for that user. Hit the 'Save' button and verify that the 'Create Cisco Unity User' option shows up in the drop-down box in the right hand corner.
3) Log into Cisco Unity Connection Administration, and select 'John Doe'. Click on the link to re-associate and select 'John Doe2'. This links the Unity user to the CUCM user.
4) Log back into CUCM and select 'John Doe' from the user list. Remove all device associations from the user. Hit Save, then delete the user.
5) Select 'John Doe2' and rename the user as 'John Doe'.
These steps fixed my problem. I had to do it for all the users whose association was broken. One note to make is that the voicemail PIN is automatically reset to the default I believe, which is 0000. Other than that voicemail continues to work normally and users don't have to redo their greetings and such.

Asa/asdm Wizard "Unified Communications Wizard"

Similar Messages

Maybe you are looking for