ASA Connections Per Second Usage

Can anyone help me finding the cause of this connections??

Hello,
You can either look at the output of 'show connection' or watch for %ASA-6-302013 and %ASA-6-302015 syslogs to see the connections that are being built by the ASA at any given time.
Hope that helps.
-Mike

Similar Messages

  • Asa5505 crashing perhaps related to maximum connections per second

    I have an asa5505 with software version 7.2(3) that randomly stops responding.
    The firewall sits in front of a public facing webserver that handles a significant amount of traffic.
    I was wondering that would happen when the asa5505 reaches or exceeds the 4000 connections per second limit... i.e. would this possibly explain why my asa5505 stops responding and requires a power cycle in order to start working again.
    when it "crashes" it does not respond on either the outside or inside interfaces.

    Investigation into this issue should be performed via the console connection. This may allow you access to debugs/switchport states/etc. that you will not otherwise get if the ASA is not accepting connections through the LAN. I understand that a quick power-cycle 'resolves' the issue but you're dooming yourself to face it again. Next time this happens I would recommend interrogating the device via console and posting back your results. From there, I'm sure we can help.
    Kind Regards,
    Kevin
    **Please remember to rate helpful posts as well as mark the question as 'answered' once your issue is resolved. This will help others to find your solution faster.

  • CSM: total connections per second (cps)

    Hi,
    How can I read out the total connections per second?
    Does the command
    "show module csm 8 tech-support utilization | i UNICAST"
    Or is this concerning the total packets per second?
    Thanks, Wim

    gdufour-cat6k-2#sho mod csm 3 tech proc 1 | i Session
    Packets Drop No More Sessions 0 0 0
    Packets Session Hit 53 0 0
    Packets New Sessions 104 0 0
    The last columns of "Packets New Sessions" is the number of connection per sec.
    Gilles.

  • ASA events per second

    Looking for a model comparison for the ASA family. I need to know how many events per second the ASA is capable of sending to a syslog server.
    Thanks.

    Among the many products and technologies that make the Self-Defending Network possible is the Cisco Security Monitoring, Analysis, and Response System (Cisco Security MARS). This appliance, which comes in six different models to accommodate from 50 to 10,000 events per second
    http://cisco.com/en/US/netsol/ns643/netbr0900aecd80591d44.html

  • How can I find the number of megabytes per seconde of mij connection with internet

    In a tuning program is asked the number of MB per second of mij lan-connection with internet.
    I should like to know how I can find that number.

    Hey Tongo,
    This isn't really a Firefox question. I would suggest doing a quick Google search for "Internet Speed Test" or something of that nature. I know a very popular one is located here: http://www.speakeasy.net/speedtest/
    Hopefully this helps!

  • When i try to turn on my ipod, it tells me to connect to itunes and restore but a message pops up and says that i dont have an internet connection.  the connection is on and it loads at 100mb per second.

    when i try to turn on my ipod, it tells me to connect to itunes and restore but a message pops up and says that i dont have an internet connection.  the connection is on and it loads at 100mb per second.

    Update Server
    Try:
    - Powering off and then back on your router.
    - iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
    - Change the DNS to either Google's or Open DNS servers
    Public DNS — Google Developers
    OpenDNS IP Addresses
    - For one user uninstalling/reinstalling iTunes resolved the problem
    - Try on another computer/network
    - Wait if it is an Apple problem

  • 10,000 Recorc Per Second (In EJB 3.0)

    hi all,
    i have some mission critical tasks into my project, is it possible to persist 10 000 record per seconds,
    1. AS - JBoss Application Server 4.0.4GA
    2. Database - Oracle 10G 10.2.0.1
    3.EJB - 3.0 Framework
    4.OS - SunOS 5.10
    4.Server - Memory: 16G phys mem, 31G swap, 16 CPU,
    i know that i need performace
    here is my configurations about performance
    1. JVM Config Into JBoss
    JAVA_OPTS="-server -Xmx3168m -Xms2144m -Xmn1g -Xss256k -d64 -XX:PermSize=128m -XX:MaxPermSize=256m
       -Dsun.rmi.dgc.client.gcInterval=3600000 -Dsun.rmi.dgc.server.gcInterval=3600000
        -XX:ParallelGCThreads=20 -XX:+UseConcMarkSweepGC -XX:+UseParNewGC
        -XX:SurvivorRatio=8 -XX:TargetSurvivorRatio=90 -XX:MaxTenuringThreshold=31 -XX:+AggressiveOpts
        -verbose:gc -XX:+PrintGCTimeStamps -XX:+PrintGCDetails -XX:+PrintTenuringDistribution2. also i configure my database.xml file
    <?xml version="1.0" encoding="UTF-8"?>
    <datasources>
      <xa-datasource>
        <jndi-name>XAOracleDS</jndi-name>
        <track-connection-by-tx/>
        <isSameRM-override-value>false</isSameRM-override-value>
        <xa-datasource-class>oracle.jdbc.xa.client.OracleXADataSource</xa-datasource-class>
        <xa-datasource-property name="URL">jdbc:oracle:thin:@192.168.9.136:1521:STR</xa-datasource-property>
        <xa-datasource-property name="User">SRVPROV</xa-datasource-property>
        <xa-datasource-property name="Password">SRVPROV</xa-datasource-property>
        <exception-sorter-class-name>org.jboss.resource.adapter.jdbc.vendor.OracleExceptionSorter</exception-sorter-class-name>
        <min-pool-size>50</min-pool-size>
        <max-pool-size>200</max-pool-size>    
        <metadata>
             <type-mapping>Oracle9i</type-mapping>
          </metadata>
      </xa-datasource>
      <mbean code="org.jboss.resource.adapter.jdbc.vendor.OracleXAExceptionFormatter"
             name="jboss.jca:service=OracleXAExceptionFormatter">
        <depends optional-attribute-name="TransactionManagerService">jboss:service=TransactionManager</depends>
      </mbean>
    </datasources>3. Also i have one simple Stlateless Session Bean
    @Stateless
    @Remote(UsageFasade.class)
    public class UsageFasadeBean implements UsageFasade {
         @PersistenceContext(unitName = "CustomerCareOracle")
         private EntityManager oracleManager;
         @TransactionAttribute(TransactionAttributeType.REQUIRED)
         public long createUsage(UsageObject usageObject, UserContext context)
                   throws UserManagerException, CCareException {
              try {
                   oracleManager
                             .createNativeQuery("INSERT INTO USAGE "
                                       + " (ID, SESSION_ID, SUBSCRIBER_ID, RECDATE, STARTDATE, APPLIEDVERSION_ID, CHARGINGPROFILE_ID, TOTALTIME, TOTALUNITS, IDENTIFIERTYPE_ID, IDENTIFIER, PARTNO, CALLTYPE_ID, USAGETYPE, APARTY, BPARTY, CPARTY, IMEI, SPECIFICCALLTYPE, APN, SOURCELOCATION, SMSCADDRESS, MSC_ID, ENDREASON, USAGEORIGIN, BILL_ID, CONTRACT_ID) "
                                       + " VALUES(SEQ_USAGE_ID.NEXTVAL, NULL, NULL, SYSDATE, SYSDATE, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL) ");                              
                   return 1;
              } catch (Exception e) {
    }3. and into client side i have 200 Threads, each of them tried to call this method 50 times
    my result is that i can persist 10000 record in 20 seconds, without hibernate, with hibernate i got worst result :(,
    also i hear that it is good idea to use JDBC 3.0 driver for performance,
    i download newest oracle jdbc jar file from oracle site
    http://www.oracle.com/technology/software/tech/java/sqlj_jdbc/htdocs/jdbc_10201.html
    is this jar file JDBC 3.0 driver ?
    is there any hibernate performance configuration?
    is it any more performance tuning into JBoss or EJB with entity beans?
    can anybody help me ? or is there any doc which can help me ?
    Regards,
    Paata,
    Message was edited by:
    paata
    Message was edited by:
    paata

    What makes you think that your database, just the database (with the box that it is on) can handle that rate?
    What makes you think that your network can handle that?
    While this is going on is this the ONLY traffic that will be on the network?

  • System.log coreservicesd[55]: *** process 55 exceeded 500 log message per second limit

    I have a number of logs that suggest there is something not working correctly.  This error is generated on start.
    coreservicesd[55]: *** process 55 exceeded 500 log message per second limit  -  remaining messages this second discarded ***
    Any ideas on what might be happening?
    Mar  4 10:53:59 TJBs-MacBook-Pro mds[39]: (Error) Server: ==== XPC handleXPCMessage XPC_ERROR_CONNECTION_INVALID
    Mar  4 10:53:59 TJBs-MacBook-Pro com.apple.launchd.peruser.501[119] ([0x0-0x15015].com.apple.AppleSpell[193]): Exited: Killed: 9
    Mar  4 10:53:59 TJBs-MacBook-Pro com.apple.launchd.peruser.501[119] (com.apple.mdworker.pool.0[508]): Exited: Terminated: 15
    Mar  4 10:53:59 TJBs-MacBook-Pro com.apple.launchd.peruser.501[119] (com.apple.quicklook.ui.helper[463]): Exited: Killed: 9
    Mar  4 10:53:59 TJBs-MacBook-Pro com.apple.launchd.peruser.501[119] (com.apple.talagent[138]): Exited: Killed: 9
    Mar  4 10:53:59 TJBs-MacBook-Pro com.apple.launchd.peruser.501[119] ([0x0-0x51051].com.apple.QuickTimePlayerX[464]): Exited: Killed: 9
    Mar  4 10:53:59 TJBs-MacBook-Pro loginwindow[42]: DEAD_PROCESS: 42 console
    Mar  4 10:54:00 TJBs-MacBook-Pro airportd[646]: _doAutoJoin: Already associated to “9868LT1”. Bailing on auto-join.
    Mar  4 10:54:00 TJBs-MacBook-Pro shutdown[649]: reboot by MASTER:
    Mar  4 10:54:12 localhost bootlog[0]: BOOT_TIME 1330883652 0
    Mar  4 10:54:24 localhost UserEventAgent[11]: starting CaptiveNetworkSupport as SystemEventAgent built May 25 2011 12:27:35
    Mar  4 10:54:14 localhost com.apple.launchd[1]: *** launchd[1] has started up. ***
    Mar  4 10:54:23 localhost com.apple.launchd[1] (com.apple.sandboxd): Unknown value for key POSIXSpawnType: Interactive
    Mar  4 10:54:24 localhost UserEventAgent[11]: WirelessAirPortDeviceNameCopy(): no BSD interface name found for object 12551
    Mar  4 10:54:24 localhost UserEventAgent[11]: CaptiveNetworkSupport:CaptiveSCCopyWiFiDevices:388 WiFi Device Name == NULL
    Mar  4 10:54:28 localhost com.apple.pfctl[32]: No ALTQ support in kernel
    Mar  4 10:54:28 localhost com.apple.pfctl[32]: ALTQ related functions disabled
    Mar  4 10:54:29 localhost com.apple.ucupdate.plist[25]: ucupdate: Checked 1 update, no match found.
    Mar  4 10:54:31 localhost mDNSResponder[35]: mDNSResponder mDNSResponder-320.14.0 (Nov 16 2011 01:16:56) starting OSXVers 11
    Mar  4 10:54:32 localhost mds[34]: (Normal) FMW: FMW 0 0
    Mar  4 10:54:34 localhost com.apple.usbmuxd[24]: usbmuxd-263 on Nov 14 2011 at 18:58:10, running 64 bit
    Mar  4 10:54:34 localhost airportd[65]: _processDLILEvent: en1 attached (down)
    Mar  4 10:54:36 localhost mds[34]: (/.Spotlight-V100/Store-V2/E6A82D50-3EA4-4011-B64F-87EB86ACF9E3)(Normal) IndexGeneral in openReverseStore:Shadowing reverse store on open
    Mar  4 10:54:37 localhost UserEventAgent[11]: CaptiveNetworkSupport:CreateInterfaceWatchList:2788 WiFi Devices Found.
    Mar  4 10:54:37 localhost UserEventAgent[11]: CaptiveNetworkSupport:CaptivePublishState:1211 en1 - PreProbe
    Mar  4 10:54:37: --- last message repeated 2 times ---
    Mar  4 10:54:37 localhost configd[14]: bootp_session_transmit: bpf_write(en1) failed: Network is down (50)
    Mar  4 10:54:37 localhost configd[14]: DHCP en1: INIT-REBOOT transmit failed
    Mar  4 10:54:37 TJBs-MacBook-Pro configd[14]: setting hostname to "TJBs-MacBook-Pro.local"
    Mar  4 10:54:37 TJBs-MacBook-Pro configd[14]: network configuration changed.
    Mar  4 10:54:38 TJBs-MacBook-Pro UserEventAgent[11]: ServermgrdRegistration cannot load config data
    Mar  4 10:54:38 TJBs-MacBook-Pro systemkeychain[61]: done file: /var/run/systemkeychaincheck.done
    Mar  4 10:54:38 TJBs-MacBook-Pro UserEventAgent[11]: get_backup_share_points no AFP
    Mar  4 10:54:38 TJBs-MacBook-Pro configd[14]: network configuration changed.
    Mar  4 10:54:38: --- last message repeated 1 time ---
    Mar  4 10:54:38 TJBs-MacBook-Pro mDNSResponder[35]: D2D_IPC: Loaded
    Mar  4 10:54:38 TJBs-MacBook-Pro mDNSResponder[35]: D2DInitialize succeeded
    Mar  4 10:54:38 TJBs-MacBook-Pro loginwindow[37]: Login Window Application Started
    Mar  4 10:54:38 TJBs-MacBook-Pro rpcsvchost[86]: sandbox_init: com.apple.msrpc.netlogon.sb succeeded
    Mar  4 10:54:39 TJBs-MacBook-Pro netbiosd[90]: Unable to start NetBIOS name service:
    Mar  4 10:54:39 TJBs-MacBook-Pro airportd[65]: _doAutoJoin: Already associated to “9868LT1”. Bailing on auto-join.
    Mar  4 10:54:40 TJBs-MacBook-Pro loginwindow[37]: **DMPROXY** Found `/System/Library/CoreServices/DMProxy'.
    Mar  4 10:54:40 TJBs-MacBook-Pro com.apple.launchctl.LoginWindow[99]: com.apple.findmymacmessenger: Already loaded
    Mar  4 10:54:40 TJBs-MacBook-Pro airportd[65]: _doAutoJoin: Already associated to “9868LT1”. Bailing on auto-join.
    Mar  4 10:54:40 TJBs-MacBook-Pro loginwindow[37]: Login Window Started Security Agent
    Mar  4 10:54:40 TJBs-MacBook-Pro SecurityAgent[105]: Echo enabled
    Mar  4 10:54:41 TJBs-MacBook-Pro WindowServer[85]: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
    Mar  4 10:54:41 TJBs-MacBook-Pro configd[14]: network configuration changed.
    Mar  4 10:54:41 TJBs-MacBook-Pro UserEventAgent[11]: CaptiveNetworkSupport:CaptivePublishState:1211 en1 - Probe
    Mar  4 10:54:41 TJBs-MacBook-Pro UserEventAgent[11]: CaptiveNetworkSupport:CNSPreferences:60 Creating new preferences
    Mar  4 10:54:41 TJBs-MacBook-Pro UserEventAgent[11]: CaptiveNetworkSupport:CaptiveStartDetect:2343 Bypassing probe on 9868LT1 because it is protected and not on the exception list
    Mar  4 10:54:41 TJBs-MacBook-Pro UserEventAgent[11]: CaptiveNetworkSupport:CaptivePublishState:1211 en1 - Unknown
    Mar  4 10:54:41 TJBs-MacBook-Pro configd[14]: network configuration changed.
    Mar  4 10:54:47 TJBs-MacBook-Pro SecurityAgent[105]: User info context values set for MASTER
    Mar  4 10:54:49 TJBs-MacBook-Pro SecurityAgent[105]: Login Window login proceeding
    Mar  4 10:54:49 TJBs-MacBook-Pro loginwindow[37]: Login Window - Returned from Security Agent
    Mar  4 10:54:49 TJBs-MacBook-Pro loginwindow[37]: USER_PROCESS: 37 console
    Mar  4 10:54:49 TJBs-MacBook-Pro airportd[65]: _doAutoJoin: Already associated to “9868LT1”. Bailing on auto-join.
    Mar  4 10:54:49 TJBs-MacBook-Pro com.apple.launchd.peruser.501[119] (com.apple.ReportCrash): Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
    Mar  4 10:54:49 TJBs-MacBook-Pro com.apple.launchctl.Aqua[130]: load: option requires an argument -- D
    Mar  4 10:54:49 TJBs-MacBook-Pro com.apple.launchctl.Aqua[130]: usage: launchctl load [-wF] [-D <user|local|network|system|all>] paths...
    Mar  4 10:54:49 TJBs-MacBook-Pro com.apple.launchd.peruser.501[119] (com.apple.launchctl.Aqua[130]): Exited with code: 1
    Mar  4 10:54:49 TJBs-MacBook-Pro UserEventAgent[11]: CaptiveNetworkSupport:CNSServerRegisterUserAgent:187 new user agent port: 14347
    Mar  4 10:54:50 TJBs-MacBook-Pro talagent[137]: CoreDockMinimizeItems failed (-4959)
    Mar  4 10:54:50 TJBs-MacBook-Pro com.apple.dock.extra[147]: Could not connect the action buttonPressed: to target of class NSApplication
    Mar  4 10:54:50 TJBs-MacBook-Pro com.apple.dock.extra[147]: 2012-03-04 10:54:50.423 com.apple.dock.extra[147:1707] Could not connect the action buttonPressed: to target of class NSApplication
    Mar  4 10:54:50 TJBs-MacBook-Pro com.apple.dock.extra[147]: Could not connect the action buttonPressed: to target of class NSApplication
    Mar  4 10:54:50 TJBs-MacBook-Pro com.apple.dock.extra[147]: 2012-03-04 10:54:50.424 com.apple.dock.extra[147:1707] Could not connect the action buttonPressed: to target of class NSApplication
    Mar  4 10:54:50 TJBs-MacBook-Pro com.apple.dock.extra[147]: Could not connect the action buttonPressed: to target of class NSApplication
    Mar  4 10:54:50 TJBs-MacBook-Pro com.apple.dock.extra[147]: 2012-03-04 10:54:50.425 com.apple.dock.extra[147:1707] Could not connect the action buttonPressed: to target of class NSApplication
    Mar  4 10:54:50 TJBs-MacBook-Pro com.apple.dock.extra[147]: Could not connect the action buttonPressed: to target of class NSApplication
    Mar  4 10:54:50 TJBs-MacBook-Pro com.apple.dock.extra[147]: 2012-03-04 10:54:50.426 com.apple.dock.extra[147:1707] Could not connect the action buttonPressed: to target of class NSApplication
    Mar  4 10:54:50 TJBs-MacBook-Pro coreservicesd[55]: *** process 55 exceeded 500 log message per second limit  -  remaining messages this second discarded ***
    Mar  4 10:54:51 TJBs-MacBook-Pro Finder[139]: kCGErrorIllegalArgument: _CGSFindSharedWindow: WID 28
    Mar  4 10:54:51 TJBs-MacBook-Pro Finder[139]: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
    Mar  4 10:54:51 TJBs-MacBook-Pro Finder[139]: kCGErrorIllegalArgument: CGSRemoveSurface: Invalid window 0x1c
    Mar  4 10:54:51 TJBs-MacBook-Pro Dock[136]: kCGErrorIllegalArgument: CGSSetWindowTags: Invalid window 0x1c
    Mar  4 10:54:51 TJBs-MacBook-Pro Dock[136]: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
    Mar  4 10:54:51 TJBs-MacBook-Pro Dock[136]: kCGErrorIllegalArgument: CGSClearWindowTags: Invalid window 0x1c
    Mar  4 10:54:51 TJBs-MacBook-Pro Dock[136]: kCGErrorIllegalArgument: CGSOrderWindowList
    Mar  4 10:54:51 TJBs-MacBook-Pro talagent[137]: kCGErrorIllegalArgument: CGSGetWindowPresenter
    Mar  4 10:54:51 TJBs-MacBook-Pro talagent[137]: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
    Mar  4 10:54:51 TJBs-MacBook-Pro talagent[137]: kCGErrorIllegalArgument: CGSOrderWindowListWithGroups: invalid window ID (28)
    Mar  4 10:54:51 TJBs-MacBook-Pro talagent[137]: kCGErrorIllegalArgument: CGSOrderWindowList: NULL list pointer or empty list
    Mar  4 10:54:51 TJBs-MacBook-Pro talagent[137]: CGSConnectionRelinquishWindowRights(cid, newWindowNumber, reservedRights): CGError 1001 on line 619
    Mar  4 10:54:53 TJBs-MacBook-Pro com.apple.launchd.peruser.501[119] ([email protected][161]): Exited with code: 1
    Mar  4 10:54:54 TJBs-MacBook-Pro com.apple.launchd.peruser.89[118] (com.apple.mdworker.pool.0): Throttling respawn: Will start in 4 seconds
    Mar  4 10:54:55 TJBs-MacBook-Pro com.apple.launchd.peruser.501[119] (com.apple.mdworker.pool.0): Throttling respawn: Will start in 3 seconds
    Mar  4 10:54:53 TJBs-MacBook-Pro ntpd[21]: proto: precision = 1.000 usec
    Mar  4 10:55:06 TJBs-MacBook-Pro coreservicesd[55]: *** process 55 exceeded 500 log message per second limit  -  remaining messages this second discarded ***
    Mar  4 11:00:28 TJBs-MacBook-Pro firefox[219]: -_scrollPhase is deprecated for NSScrollWheel. Please use -momentumPhase.
    Mar  4 11:00:28 TJBs-MacBook-Pro firefox[219]: -_continuousScroll is deprecated for NSScrollWheel. Please use -hasPreciseScrollingDeltas.
    Mar  4 11:00:28 TJBs-MacBook-Pro firefox[219]: -deviceDeltaY is deprecated for NSScrollWheel. Please use -scrollingDeltaY.
    Mar  4 11:00:28 TJBs-MacBook-Pro firefox[219]: -deviceDeltaX is deprecated for NSScrollWheel. Please use -scrollingDeltaX.

    I was able to identify the cause. Wrote in this thread the solution:
    http://discussions.apple.com/message.jspa?messageID=13160082#13160082

  • Downloads per Second slower than normal

    Hi, i've moved from profile ADSL MAX to ADSL 2+ however my downloads per second are average around 2-400kbs a sec, my download speed is just over 7mb and my downloads have been around 850kbs a sec.
    Any reason to why this is?
    I don't do much heavy downloads, most of my connection is used for either gaming or downloading some the app or playstation and its really slow at downloading anything.
    If you want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side If the the reply answers your question then please mark as ’Mark as Accepted Solution

    sorry my computer crashed here it is
    FAQ
    Test1 comprises of two tests
    1. Best Effort Test:  -provides background information.
    Download  Speed
    4339 Kbps
    0 Kbps
    7150 Kbps
    Max Achievable Speed
     Download speedachieved during the test was - 4339 Kbps
     For your connection, the acceptable range of speeds is 2000-7150 Kbps.
     Additional Information:
     Your DSL Connection Rate :7192 Kbps(DOWN-STREAM), 1060 Kbps(UP-STREAM)
     IP Profile for your line is - 6345 Kbps
    2. Upstream Test:  -provides background information.
    Upload Speed
    821 Kbps
    0 Kbps
    1060 Kbps
    Max Achievable Speed
    >Upload speed achieved during the test was - 821 Kbps
     Additional Information:
     Upstream Rate IP profile on your line is - 1060 Kbps
    We were unable to identify any performance problem with your service at this time.
    It is possible that any problem you are currently, or had previously experienced may have been caused by traffic congestion on the Internet or by the server you were accessing responding slowly.
    If you continue to encounter a problem with a specific server, please contact the administrator of that server in the first instance.
    If you want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side If the the reply answers your question then please mark as ’Mark as Accepted Solution

  • Why does my iChat video only run at one frame per second?

    When I connect to anyone on iChat my video runs at only about one frame per second. When others connect to me their video is much faster. This hasn't been a problem in the past - even with other Internet apps running when I'm using iChat. Could this be a problem with my ISP? Is there something I should do?

    Hi Gary45,
    In AIM 5.9 the PC can set the Video quality rate.
    Start a chat.
    The PC end clicks on the rear tab of the Video chat.
    This brings their own preview to the front.
    To the right there is anow a small iCon.
    Click on this.
    This brings up a slider.
    Slide the slider to the Left.
    If this is done to an iChat Buddy and they have the Connection Doctor open from the Video menu, they will see the Bit rate and Framerate go up. The consequence is that as the video Quality goes down the data that makes up the pic goes down allowing for better refresh rates and a smoother video.
    Do you mean this only happens between you and him and not between him and his son ?
    Or do you mean it happens between you and him and not his son and you ?
    If it is happening between you and other people aslo check out this FAQ http://discussions.apple.com/thread.jspa?threadID=278760
    9:19 PM Tuesday; July 25, 2006

  • Video chats get only 1 frame per second on my friend's macbook.

    Hi.
    My friend has a macbook, and whenever she video chats anyone, the video will only change 1 frame per second after 10 seconds in the video chat. Like the first 10 seconds, she`ll get 30fps but then after 10 - 15 seconds, it'll go down to 1 fps. It's not just with me either, its with all people I know its not her connection because her video isn't blurry at all, its crystal clear, but theres just the 1 frame per second. Her photobooth works fine and all, however. IT's a brand new macbook, fresh from apple.

    Tell us every single add-On for iChat and the computer as a whole you have please.
    Spirited Away causes the App in Use's Icon to be displayed as your Buddy Pic.
    Lotus Notes can cause the slow down you are seeing.
    So Can not Updating iChatUSBCAm when you upgrade to Leopard.
    There are others
    like Folding@hoem
    Seti Screen Saver
    Bionic (Maybe spelt Bionix)
    9:52 PM Sunday; February 24, 2008

  • What is the most Frames Per Second NI-CAN can do?

    My goal is to send 1000 Frames per Second on my CAN bus using the NI-CAN PCI 2 slot card I have.  However the closest I have been able to do is 666 frames per second.  This is sending 8 frames every 12 MS using an edited readmult example.  Is there a way to do this with writemult?  Or is there a hardware limit that I am trying to go past?
    What can I mess with to get more frames?  Increase Baudrate?  Decrease the size of the frames?  (I've tried both of those)
    Other questions that should probably go in other posts  (Frame API):
    Is there a way to send/read the frames at the bit-level?  I have found ways to manipulate Arbitration ID, Remote Frame, Data Length, and Data, but there are several other bits in a frame.
    Is there a way to send a bad frame, one that would raise/cause an error frame?

    Yes, I did break 1,000 Frames Per Second.  I got up to 1,714 and 1,742 using two different methods.  This is at 250 kbps, if you used 500 or 1 Mbps, you could get more frames.  If you have 125 kbps, you might not be able to break 1,000 Frames per Second.
    ncWriteMult is the key.  You can load 512 frames in a queue at a time.  I would put 256 on at a time and check to see if there was less than 256 frames left in the queue and if there was, load it up, that way the queue would never be empty.  I went about it 2 ways, one was using ncGetAttribute to determine space left, and that got the faster method, however, I was also trying to read the messages to verify that it worked, and I had problems with logging every frame.  It would also send the first 40 ncWriteMults quickly, as if the queue it was filling was much larger than 512.
    The other way, was using trial and error to determine how many MS to sleep before writing the next batch of 256 frames.  There are variables outside of my control that determined the time it would take and it would vary a few ms.  I wanted a stable environment that could send forever without filling the queue so I went with a value that would wait 2 or 3 ms, depending on conditions before writing again.  The value I used was 142 ms, I think.  Your Mileage May Vary.
    There is also a way to do some error handling that I did not try to utilize.  Instead of the process crashing, there is a way to tell it to wait if this error is returned.  That might be the best way for me to implement what I wanted to do, but I was assigned another task before I tried to get that to work.
    There is a timing element in ncWriteMult's documentation I didn't look into very much, but that would space the frames out and could send 1,000 frames a second evenly distributed, instead of sending them as quickly as possible, wait some ms then send another batch.
    If anyone could link us, or provide some code snippets of the error handling, or proper usage of ncGetAttribue, or some way to read faster, that would be greatly appreciated.

  • Events per second

    Is there a command to determine the events per second that an ASA is generating?  I can see the total messages logged, but can't tell what measurement of time they're associated with.
    thank you         

    hi william,
    thanks for you feedback! you could verify if the the 'rate-limit' for syslog is enabled on the ASA.
    see sample below.
    ASA5505(config)# logging rate-limit ?
    configure mode commands/options:
      <1-2147483647>  Specify logging rate-limit number
      unlimited       Specify unlimited option for rate-limit
    ASA5505(config)# logging rate-limit 100 ?
    configure mode commands/options:
      <1-2147483647>  Specify logging rate-limit interval
      level           Specify logging level for rate-limit
      message         Specify the syslog id for rate-limit
    ASA5505(config)# logging rate-limit 100 1 ?    <<< 100 LOGS EVERY 1 SECOND
    configure mode commands/options:
      level    Specify logging level for rate-limit
      message  Specify the syslog id for rate-limit
    ASA5505(config)# logging rate-limit 100 1 level ?
    configure mode commands/options:
      <0-7>          Enter syslog level (0 - 7)
      alerts         Immediate action needed           (severity=1)
      critical       Critical conditions               (severity=2)
      debugging      Debugging messages                (severity=7)
      emergencies    System is unusable                (severity=0)
      errors         Error conditions                  (severity=3)
      informational  Informational messages            (severity=6)
      notifications  Normal but significant conditions (severity=5)
      warnings       Warning conditions                (severity=4)
    ASA5505(config)# logging rate-limit 100 1 level 7
    ASA5505(config)# sh run logging
    logging rate-limit 100 1 level 7

  • Connecting a second PC

    I'm trying to connect a second PC (DELL D630) to my Airport Express. I can see the network and am asked for a network key. I have tried to enter the Hex equivalent I found in my Airport Utility. My network connection always shows as having limited or no connectivity. My IP address is invalid and can't be renewed when I try to repair the connection.
    I'm not used to configuring network connections so I don't know where I'm going wrong.

    The sad things about ipods you cant use them off two computers. if you have a CD burner burn all the songs off of one computer and put them on the other. its a sad fact of life one computer per ipod

  • More flexibility in limiting requests per second or minute

    We've read the docs on limiting the requests-per-second (max-rps), but we would actually like to set the threshold at less than one request per second. For example, we'd like to set the maximum requests to something like once every 5 seconds. But values like 0.2 for max-rps are not accepted. So the question is:
    Is there a way to set the maximum frequency of requests to something like once every 5 or 10 seconds?
    Is there an add-in that does that or could we create an add-in to do that?
    It looks like the server is NOT open source, so we cannot change the current code to address this, but certainly let me know if I'm wrong about that.
    In case it's helpful as background, the reason we want a lower threshold is that we only intend to limit access for html or jsp pages (not gif, jpg, js, css, etc.) That's because we don't want users to get half of a page, like the html, but no images or css, which would look like an ugly error. We want them to get the html complete with all the embeded files or get an error page. We're really only trying to block bots, which might make requests every second or slightly less often, and not block any human users. If there are other general suggestions for how to meet our goal, I'd love to hear them.

    No, the lowest max limit is 1rps. The request limiting isn't really meant for what you're describing, it is for limiting high request rates. At less than 1/sec such detection would have false positive with real users anyway, so it wouldn't be such a great way of distinguishing users from bots. I'm not sure it would prove very satisfactory.
    You could create your own NSAPI plugin (see docs on NSAPI usage) to implement your desired logic. I'd probably look into long term counters instead, but I don't really know the details of the exact problem you're trying to address.

Maybe you are looking for