ASA - New HA Design - Limitations

hey folks,
I have these two brand spanking 5540's which would be configured in a HA design(Active/Standby)
The only bugger is this client has no spare IP's which can be used on the inside nor the outside.
Yes, all I have been given is two IP's(inside and outside)
I plan to use gig4 for command replication and monitoring
Yes, the design is such that these two new ASA's would be a second layer of security.
Now, is it absolutely necessary to have a secondary IP on the inside interface for the failover to occur or just a standby IP on the dedicated management interface is enough for the failover to happen?
Also, can someone let me know where ASA support interface tracking and punishing the active or standby device to give-up it's active state?
thanks.

Hello Mikull,
For a good desing ( Check the status of all the network interfaces) you do need it as failover is based on the exchange of hello packets between both the primary and secondary boxes.
Any other question.. Let me know.. Just remember to rate all of my answers.
Julio

Similar Messages

Design Limitation On ALL Santa Rosa MacBook Pros, 2.2 and 2.4 GHz

While searching the Internet for answers to my new $2500.00 MBP headphone (output jack) has audible hissing sounds I found several posts on Macrumors.com and macintouch.com to explain the design Limitation/Problem. To summarize:
The Problem
The issue has three components, as described in this MacinTouch Report:
- A low hiss that is constant whenever the audio circuitry is on
- Static that occurs whenever anything is playing... even something quiet.
- A series of high-pitched noises that occur somewhat randomly. The best comparison I've seen is that it's like listening to those hearing tests where you raise your hand when you hear a tone.
The problem only occurs with low-impedance headphones (more on this below).
Some Facts
- The problem occurs on ALL Santa Rosa MacBook Pros, 2.2 and 2.4 GHz. It is a design flaw on Apple's part, and returning your machine for a new one will not help. There are plenty of people who say they can't hear the noise, but those people either have high-impedance headphones or speakers, or just don't have very good hearing.
- Only Santa Rosa MacBook Pros seem to be affected by this particular static problem. I've seen some reports of other machines having audio issues, but they are always different.
- The 'Audio Update 2007-001' that Apple released about two weeks ago doesn't fix it. It does fix a popping problem on all Intel Macs (including the SR MBPs), so it's worth installing, but that is a different problem than this one.
- It does seem to be an Apple-specific problem; I've been unable to find any other reports of non-Apple Santa Rosa notebooks having the same problem.
Just wondering if anyone else has had this issue with their new MBP?
Thanks,
B

I experience the issue as well both in OS X and when I'm in Windows Vista.
Whenever a program uses audio, there is an annoying high-pitched hissing noise from the built-in speakers.
Of course the severity of the problem depends on the individual hearing ability, but everyone I have asked, have been able to hear the noise.
Apple is known to be the first choice of audio professionals; however this problem is below that standard.

New DC design

we are medium size service provider with limited budget and rack space for new upgrade project.
objective is to design new datacenter design with Core - Distribution and Access in parallel to existing and gradually migrate networks over.
for Core we have already purchased a pair of 4948E, for Distribution we are not sure but looking at 4500 X, and edge witll be layer 2 Cisco switches , perhaps 2960
It a shared service model with cloud services, security and availability is important, design we are working on is:
- Layer 3 at Core
- VRF for each customer at Core with VACLs where required
- VSS ( is it required at both distribution and Core) ?
- Access to Distribution 10G trunks
does above look ok with the selection of hardware?

If you run VSS in the Distribution tier of your network then spanning tree won't block OSI Layer2 uplinks from the Access tier. Therefore you double the bandwidth of these uplinks.
With OSI Layer3 uplinks from the Distribution to the Core you don't have this issue so the need for VSS is reduced. However you stated that you have 4948E switches in the Core. These switches don't support VSS.
You will only be able to implement VRF-Lite on the hardware you listed above. It depends on your business requirements if you need to support a full MPLS VPN network. If that is the case then you would need to look to deploying 6500s in the Distribution tier.
For redundancy I would muli-home each 2960 to each 4500X.
Don't forget to rate helpful posts.

I am trying to download the new CS6 Design Suite - not able to get past the previous version.

I am trying to downloat the new CS6 Design Suite and am not able to get past the previous version menu. Getting the message "This serial number is not for a qualifying product. Please try another." How do I get past this?

When you say "Download" do you actually mean install?
Which version are you upgrading from?
Could you try the solutions in the following article: http://helpx.adobe.com/creative-suite/kb/error-serial-number-qualifying-product.html.
Let us know if it helps.

NEW FORUM DESIGN: Post Feedback Here

Posting everything in one place will allow Comcast to better monitor what feedback is given.

andyross Member Since: ‎10-17-2003 Posts: 3,647 HORRIBLE Forum updateShare Topic Options Subscribe to this discussion Are you deliberately trying to make the forums so hideous that nobody will use them? The subject text is so tiny, I can barely see it, plus it's virtually impossible to see the difference between read and unread. The subject listings have a huge amount of wasted space between them. You could double the number of on-screen lists (or shorten the scrolling) if you cut it down. There used to be a link on the right that would take me back to the Bookmarks page (what I use as a home page for these forums.) No easy way to get back there that I can see, other than directly from my browser bookmark. At least the text entry seems to properly work with Firefox. Posted on :‎03-09-2015 05:22 PM Kudos 0ReplyFollow Options ResponsesReply Posted byWelcome_to_Post Member Since: ‎07-02-2003 Posts: 5,381 *sigh* Happens every. Single. Time. They downgrade upgrade the forum software. Too bad no one listens to us. Posted on :‎03-09-2015 05:26 PM Kudos 0Reply Options Posted byQueen-Evie Member Since: ‎02-04-2004 Posts: 14,621 One not-so-wise new "feature" is that when a topic is more than one page long the FIRST post of the topic is now at the TOP of each topic page. If that post is long that is just some extra scrolling to do in order to get through it and to the replies.And if you are at the bottom of the page and scroll back to the top you gotta get past the first long post on your way back up the page. There is no clear demarcation between posts. Posts are no longer numbered. About the only things that are good are that the toolbar features when replying now work with SeaMonkey and Firefox and other browsers AND the default font size seen when composing a reply is big enough to easily see instead of being teeny tiny as it was before. Yippee!!! No more nose prints on the screen when trying to see what I was composing.
Comcast employees must be authorized to post in the forum in an official capacity. Employees posting here have their names in red and are designated as employees. Names not in red are customers. This is done to protect customers and for assurance that they are dealing with a Comcast employee.
Non-Authorized Employees are allowed to post but cannot state they are employees nor can they allude to being employees. Posted on :‎03-09-2015 06:40 PM Kudos 0ReplyFollow Options Posted byQueen-Evie Member Since: ‎02-04-2004 Posts: 14,621 Do me a favor. Repost this here http://forums.comcast.com/t5/Xfinity-com-Website/NEW-FORUM-DESIGN-Post-Feedback-Here/td-p/2490433 After you do that, I will lock this topic. To anyone else who wants to post feedback do so in the topic I linked to.

@ Microsoft WPC "Soon you will see premium new Lumias designed for Windows 10″

This was something interesting that came out of Microsoft's Worldwide Partner Conference today, straight from the lips of Terry Myerson, the Executive VP of the Windows and Devices Group.
He also was quoted as saying "Last week we announced a focusing on our Lumia lineup..." Again, further proof that Microsoft is not abandoning Windows Phone or Windows 10 Mobile.
Microsoft: “Soon you will see premium new Lumias designed for Windows 10″
Check out the article for more details and then share your thoughts.
Thanks!
David
This topic first appeared in the Spiceworks Community

Which computer? There is a label on the bottom.
Try an older version of the driver for your model.
Touchpad stopped working
-Jerry

How to create new pre-designed CSS layouts in DW CS4?

Since I'm a relative newcomer to Dreamweaver and CSS, I normally begin my new pages with one of Dreamweaver CS4's pre-designed CSS layouts in the Blank Page HTML section - 2 column fixed left sidebar, 1 column elastic centered, 3 column fixed header and footer, etc.
Lately I'm expanding to some more elaborate layouts and I'll like to be able to create new pre-designed CSS layouts of my own to add to this list. So I have a couple of questions:
1) What types of files are these layouts? They all seem to have an accompanying style sheet in addition to having a page template. What I'm getting at is, if I were to revise one of these, how would I save my revised version so that it would show up in this list of pre-designed layouts in the future?
2) Related to the first question, where are these pre-designed CSS layouts stored within Dreamweaver's file and folder structure? I can't seem to find them anywhere.
I appreciate your input on this.

Adobe scrapped the old Starter pages. Many things have changed since they were first introduced.
You'll find newer Templates and Starter Layouts below:
Dreamweaver CSS Templates for beginners
http://www.adobe.com/devnet/dreamweaver/articles/dreamweaver_custom_templates.html
New DW Starter Pages --
http://www.adobe.com/devnet/dreamweaver/articles/introducing_new_css_layouts.html
Ultimate Multi-Column Layouts -
http://matthewjamestaylor.com/blog/ultimate-multi-column-liquid-layouts-em-and-pixel-width s
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb
http://alt-web.blogspot.com/

Gui error: Unable to initialize New Visual Design Mode

SAP Frontend Server
Unable to initialize New Visual Design Mode.
Please use Classic Mode.
What can i do with this error? Thanks

Hi,
Do you see this error only in 1 system. If yes, perform the following:
1. Install the updated display drivers.
2. Check the operating system (some old operating systems such as Windows 98, NT doesn't support Visual designs.)
3. Check that you have the latest version of SAP GUI patches installed.
If the problem persists, run sapsweep.exe and install the GUI again.
Rgds,
Raghu

New website design apps

What are some of the new website design apps that current iWeb users are going to?

Ethmoid is right. But after MMe is discontinued iWeb will has some problems but can be fixed as described below:
It's now confirmed that iWeb and iDVD have been discontinued by Apple. This is evidenced by the fact that new Macs are shipping with iLife 11 installed but without iWeb and iDVD.
On June 30, 2012 MobileMe will be shutdown. HOWEVER, iWeb will still continue to work but without the following:
Features No Longer Available Once MobileMe is Discontinued:
◼ Password protection
◼ Blog and photo comments
◼ Blog search
◼ Hit counter
◼ MobileMe Gallery
All of these features can be replaced with 3rd party options.
I found that if I published my site to a folder on my hard drive and then uploaded with a 3rd party FTP client subscriptions to slideshows and the RSS feed were broken. If I published directly from iWeb to the FPT server those two features continued to work correctly.
There's another problem and that's with iWeb's popup slideshows. Once the MMe servers are no longer online the popup slideshow buttons will not display their images.
Click to view full size
However, Roddy McKay and I have figured out a way to modify existing sites with those slideshows and iWeb itself so that those images will display as expected once MobileMe servers are gone. How to is described in this tutorial: #26 - How to Modify iWeb So Popup Slideshows Will Work After MobileMe is Discontinued.
In addition the iLife suite of applications offered on disc is now a discontinued product and the remaining supported iApps will only be available thru the App Store from now on.
HOWEVER, the iLife 11 boxed version that is still currently available at the online Apple Store (Store button at the top of the page) and those copies still on the shelves of retailers will include iWeb and iDVD.
This may also be of some help to you: Life After MobileMe.

Nobody INobody I spoke to likes the new Notepad design we all liked The Yellow spoke to likes the new Notepad design we all liked The Yellow Notepad can we go back ?

Nobody I spoke to likes the new Notepad design we all liked The Yellow Notepad. Any thoughts ?

I much prefer the newer design.
Nobody I spoke to likes the new Notepad design ...
... until now.

New Barclaycard Design Revealed

http://www.barclaycardring.com/t5/Barclaycard-Ring-Public-Blog/The-New-Card-Design-is-Revealed/ba-p/19532 The new Barclaycard Ring design has been revealed and will be arriving for existing cardholders in the mail by October. For new members, late July. I personally think it's a nice design and gives people more incentive to get it (for the shallow). 8% interest, no promos, no hassle, no rotating categories of any kind. What do you guys think of the new design? Will you be apping for it if you're not already a cardholder? Edit:
And here it is:We hope you like it! Thanks to everyone who voiced their opinion and helped to shape the new design. And, yes, it is a chip card. (Interested in learning more about the Chip and Signature with PIN enabled technology? Click here for additional details.) So who will get the new plastic and when?Starting in October 2015 cardmembers who made at least one purchase in 2014 willautomatically receive the new plastic in the mail. Your credit card number and the security code on the back will not change. However, if your expiration date is within a 3 year window, your new card will have a new expiration date. So you will need to remember to update any recurring billers, online merchants or digital wallets with the new date. Your old card will still be valid until sometime in early 2016. Cardmembers who did not use the card to make a purchase in 2014 or became Barclaycard Ring cardmembers in 2015 will not be automatically re-issued the new card design. If you’d like the new card (with Chip technology), you can call the number on the back of your current Ring card and request the new card design. Otherwise you can wait until your current card expires and you will automatically receive the new card in the mail. We may also choose to automatically re-issue the cards in the future to cardmembers who still have the original orange card.

Anomalous wrote:
It sort of reminds me of the Rewards card. What I find interesting in the above paragraph, is the fact that cardholders who didn't make 2014 purchases and those who obtained the Ring this year won't automatically get the card even with the ongoing need to meet the chip card deadline. Does the old Ring card have a chip? Yeah but the following paragraph that I didn't include states you can just call and request one...agree it is odd still. I got approved for the card in March and it did not have a SIM so I will be calling up and requesting a new card.

The New Card Design for the Barclays Ring.

I’m here to announce that the new card design has been finalized and it will be ready for new cardmembers in late July and existing cardmembers beginning in October. Here’s a quick recap of the very fun and innovative process that we went through together to co-create the next Barclaycard Ring card.
In 2014 we asked cardmembers in an open forum to describe what they liked and didn’t like about the design of their current Barclaycard Ring card. We received hundreds of comments and passed them along to our design team.
This resulted in the following plastic designs
Option 1.pngOption 2.png Option 3.png
Incorporating your feedback, the designers created a three dimensional view of the card designs, which we posted in the forum for more feedback. This round resulted in four unique plastic designs that were presented for an official vote.
Voting results.jpg
The winner, with 42% of the voting Ring cardmembers, was card design #1. We also noticed cardmember feedback regarding concerns about the font choice for the most popular card design. We took this feedback to the design team and they presented four more options to the internal team. We picked one and now it was time to see how these designs looked in reality. About 10 weeks later we got a “proof”, or an example of what the card would actually look like. And I will tell you that it did not look good. Luckily, one of the designers went out to visit the card production vendor. They worked with the design and the production process to get as close as possible to the original design.
And here it is:
C11_card_rRGB_RingMC_EMV.png
We hope you like it! Thanks to everyone who voiced their opinion and helped to shape the new design. And, yes, it is a chip card. (Interested in learning more about the Chip and Signature with PIN enabled technology? Click here for additional details.)
So who will get the new plastic and when?
Starting in October 2015 cardmembers who made at least one purchase in 2014 will automatically receive the new plastic in the mail. Your credit card number and the security code on the back will not change. However, if your expiration date is within a 3 year window, your new card will have a new expiration date. So you will need to remember to update any recurring billers, online merchants or digital wallets with the new date. Your old card will still be valid until sometime in early 2016.
Cardmembers who did not use the card to make a purchase in 2014 or became Barclaycard Ring cardmembers in 2015 will not be automatically re-issued the new card design. If you’d like the new card (with Chip technology), you can call the number on the back of your current Ring card after August 1st and request the new card design. Otherwise, you can wait until your current card expires and you will automatically receive the new card in the mail. We may also choose to automatically re-issue the cards in the future to cardmembers who still have the original orange card.
I hope all of that helps. Of course if you have any questions just leave it in the comments below. Thanks again for participating in the design of the new Barclaycard Ring card!

I'm apart of that community and I was shocked to see that this is all they could come up with. In todays market with the different plastics available this to me is very quaint. Not appealing and to think they had a committee and designers and all that... it's truely disappointing!

New Visual Design .... not working!

Hi,
I have SAP Logon 640 PL 23. Yesterday I changed the New Visual Design to streamline. Now when I click on the New Visual Design ... link nothing happens. Anyone who has had a similar issue. How can I solve it? Is there a way to change the design without using the New Visual Design ... link?
Thanks in advance.
/Elvez

Hi Preet,
ok, I guess that is always an option, but can you think of a way that would require less work?
Thanks.
/Björn

New Signature Design = Fast?

Should the new signature design delivered in patch 11 also cause a speed boost? I don't have hard benchmark numbers before and after, but the GUI just feels more responsive on my machine after apply the patch and switching themes.
It could just be my development system is having a good day, but I'm just impressed at how quick the GUI comes back with app server responses.
Take care,
Stephen

Hi all,
as one of our tests we perform for each patch / compilation of SAP GUI for Windows we measure the performance (focus is on CPU utilization, memory consumption and used GDI objects). For SAP Signature Design we have measured the performance a number of times and have compared this to Enjoy.
During the early stages of SAP Signature Design development we have seen a big difference between Enjoy and SAP Signature Design: SAP Signature Design consumed a lot more than Enjoy.
Through various cycles of improvement and optimization we have managed to reduce the difference between Enjoy and SAP Signature Design to the values mentioned in SAP note 26417:
"When SAP Signature Design is activated SAP GUI uses about 12MB
additional memory and the CPU utilization by SAP GUI increases to
between 140% and 175% of the utilization when using Enjoy."
The 12MB are caused by additional lilbraries which have to loaded when SAP Signature Design is active. This additional amount of memory is not used per session, but only once for all sessions.
Therefore this should not be a big issue unless you are using Terminal Servers (on a WTS this may be an issue since many users on the same hardware will need the additional 12MB).
The additional CPU utilization is required for the different drawing mechanisms (e.g. the shadows) and we currently see no way to further significantly improve this.
To answer your original question:
Even though SAP Signature Design is looking faster than Enjoy, it is not. I think the modern optical impression of the new design helps to make it look faster and on modern PCs we do not expect any significant performance issues. Therefore you probably have the "feeling" that it is faster (and this is great since the impression of the end user is very important, too).
I hope that helps to answer the question.
Best regards,
Frank Krause
Quality Manager SAP GUI

I have a new PC/Win7 and a new CS5 Design Premium Suite. InDesign is extremely slow and crashes.

I have a new PC/Win7 and a new CS5 Design Premium Suite. InDesign is extremely slow and crashes.
Any assistance about what might be going on would be extremely helpful. My CS3 was a dream compared to this version. UGGGG.

No banking software but a few other items. e.g.
acrotray *32
AeXAgentUIHost *32
csrss.exe
dagentui.exe
dwm.exe
dwrcst.exe *32
explorer.exe
FwcMgmt.exe *32
mobsinc.exe
PccNTMon.exe
PDFCreator.ext *32
pnamain.exe *32
sidebar.exe
ssonsvr.exe
taskhost.exe
taskmgr.exe
winlogon.exe

ASA - New HA Design - Limitations

Similar Messages

Maybe you are looking for