ASA Problem with outgoing mail and incoming mail

Dear Expert,
Anybody please help me !!!
Please see in the attach file.
so in the attach file all my client can access internet and can send email/receive but sometime they cannot send out i mean that in 100% they can send 80%, 20% cannot send out....and sometime, and some client cannot receive email but not all...
After you check it please advice have any config wrong??
Best regards,

Dear Marwanshawi,
I used Mdaeman.
yes, i sure my mail server don't has the problem because when i connect to router it ok but when take out router and connect to ASA it has the problem that i ask you above.
I tried to clear Xlat already.
Note: 90% all my client can send out but 10% my client cannot send out. And 90% all my client can receive from sender but 10% they cannot receive.and sometime delay ......
Best Regards,

Similar Messages

  • Problem with outgoing email and 1.0.1

    Outgoing email seems slower, especially with SSL enabled. I am configured with IMAP to exchange, BUT use smtp.dslextreme.com for outgoing. The email will send out but it will take over a minute. I did not have this problem with 1.0 and I had the same configuration with 1.0.

    Well, i decided to use my gmail account for my outgoing smtp configuration and that works great, and with ssl. So i am going to say my problem is with dslextreme and use google for outgoing now. Thanks Apple, this phone kicks ***.

  • Problem with outgoing mail server

    Hello,
    I use Mac Mail on my Mac Book Pro with my yahoo.fr email address.
    For 3 days, the outgoing mail server is offline, and I have no idea why. (The incoming mails: no problem).
    I checked the name of the server smtp.mail.yahoo.fr, changed my password, but it remains offline.
    Has anyone a solution...? Thx a lot for your help!!

    My imac is the same. However if I access my mail the old fashioned way.......go to safari...yahoo...mail...then I get in and all is ok, so I don't think Yahoo are the problem here. Loads of Apple users seem to have this problem, but no one seems to be able to sort it out, maybe when everyone goes back to a cheaper pc Apple will listen.

  • Problem with outgoing mail

    Hi. I have had a problem sending emails from my iPhone4 since I got it. Incoming mail comes in immediately, but outgoing mail always takes around 8 minutes to be sent. Even simple messages with few kb. Now even worse since I installed OS 6. No emails go out! I had it checked at my phone company and ISP. To no avail. pop and smtp addresses correct. I am at a loss. Is there anyone who can help me please? thanks.

    Hi again. Just back from ISP and phone company too. The incoming was set to the ISP configuration and the outgoing by the phone company. Works on hotmail, but am having trouble with my normal everyday email account from a local ISP. although smtp is correctly set and the others are set to off, iphone still says it is not finding the smtp.live.net, which is actually the hotmail one [also off]. the main server is set to the one i want it to find, but it keeps going to the smtp.live one, which is obviously off. perplexed!!!  can it be a software problem?
    thanks for your time and all your help1

  • E61 Problem with Outgoing Mail Server "Unable to s...

    Hi all,
    I have the following Problem.I have bought from the same ISP two different domain's and mail accounts.One with .com and the other with .info extension.
    If I try to send and receive e-mail's with my ".com" account it works fine,no problem occurs.But if I try to send and receive with my .info account I am able to receive e-mail's but I cannot send."Unable to send message":[email protected] error message occurs.
    A very interesting topic is if I send an e-mail from my [email protected] e-mail address to my [email protected] address I am able to send.
    If I try to send to another e-mail address for example [email protected] extension the following error message occurs:Unable to send message:[email protected]
    I asked to my ISP but I did not get an answer or a tip.
    Is there any known issues ?
    All help would be appreciated
    Best regards,
    Cengiz KuskayaMessage Edited by ckuskaya on 14-Aug-2006
    01:23 AM

    I am really wondering if k-9 mail will work with these issues we are having with outgoing server for roadrunner not working?
    Can anyone try to see if this would work to that has roadrunner and the iphone 4 vzw ?
    On going issue we have tried everything even called roadrunner and no work around.
    K-9 mail is an application that we can get on droids and I googled it to see if it is a possible app. to get on the iphone 4 and it says it is available.
    This would be an awesome resolution to this mystery
    thanks

  • JavaMail Problem with Outgoing Mail

    Hi, I's using a J2EE web application that makes use of JavaMail and an SMTP mail server to send outgoing mails and POP3 mail server to recieve mails.
    Everything is going fine with the POP3 mail server the application is able to recieve mails, and parse them.
    But I have problem with the outgoing mails, The application is successfuly sending mails through the SMTP mail server to addresses inside my organization, but failing the relay them to external addresses.
    Example: The application is successfuly sending mails to [email protected], but failing sendimg mails to [email protected]
    PS: the Address I configured the application to send emails from, can send mails to external users.
    I'm using Microsoft Exchange Server.

    Yeah man, I know. But the thing is am not familiar
    with the Microsoft Exchange Server configuration. And
    I guess my problem is a configureation problem.Then maybe a Java forum isn't the best place to be looking for help, innit? :-)
    Any
    expertise with Exchange Server ?Somewhere between "zero" and "none whatsoever."

  • Problem with outgoing mail server since getting .mac account

    I'm hoping someone here might be able to help me out.
    I've been using Mail for a few years now with several mail accounts. (Yahoo!, gmail, and my own domain mail). I have always been able to choose which account to send my outgoing mail FROM. That is, until I purchased a .mac account.
    Since signing up for .mac all my settings are still there for my other accounts, but I have not been able to send even ONE email from any account except the .mac account.
    I have tried setting up the outgoing mail servers and resetting them, but nothing works. Anyone have any ideas why this might be happening?
    I'm starting to consider using Yahoo! mail online for all my mail, but I would prefer to be able to click mailto links and sent right from Mail.
    Thanks.

    Hello, and welcome to the Discussions.
    Where and how are you connected to the internet with the laptop, vs the desk top -- same venue -- wireless, etc?
    Is the account you have set up, the same primary account with Charter that you use on the Desktop?
    On the desktop Mac, in Mail Preferences/Accounts/Account Information, when listed as the Outgoing Server, does smtp.charter.net have any Username appended to the name?
    Not sure if it could be case sensitive, but have you tried lower case letters for smtp?
    More info, please.
    Ernie

  • I am trying to set up my outlook 2007 account on i pad and the process sticks on verifying.  It would appear to be a problem with outgoing server and I have changed the port number but with no success.

    I have just purchased an i pad 2 and am having trouble with the e-mail set up.  Set up with wi-fi, i-cloud etc has worked fine but the i pad is recognising my outlook 2007 account details but is not verifying it.  The trouble appears to be with the outgoing server and I have tried changing the port number, but to no avail!  Also reset the account settings for holding messages on the server...help!  As you can tell I'm not very techy and I'm desperate to get the bloody thing working as I'm going away on Tuesday! Any suggestions?

    I had a similar issue and it was password case sensitive issue

  • Problem with outgoing mail in Mac Mail

    Checked all settings and everything seems to be correct , but it keeps giving me the message of"[email protected] address is rejected by server". Can Anyone help me please?!
    Solved!
    Go to Solution.

    jeraab wrote:
    Checked all settings and everything seems to be correct , but it keeps giving me the message of"[email protected] address is rejected by server". Can Anyone help me please?!
    I solved it myself. I had to redo the authentication process. I could have sworn I had done this already , but I guess not since it now works.

  • TS3899 With Yahoo Mail, and anotare account (Inacap Mail), I can only receive mails but I can't send emails. I don't know if this is a problem of the iPad or it is a problem with yahoo mail, because using Gmail and the email of my job I don' have this pro

    With Yahoo Mail, and anotare account (Inacap Mail), I can only receive mails but I can't send emails. I don't know if this is a problem of the iPad or it is a problem with yahoo mail, because using Gmail and the email of my job I don' have this problem.

    Google them to confirm the settings that you need for the outgoing server, then check the setting you entered on the pad.  Pay real close attention to the outgoing server name, and port.  You may need to change in on the pad. 

  • HT6030 I have many problems with my mail since I moved to mavericks. The filter is very sensitive, read mail appears as unread, I can't drag mail to the folders and more. I can't update the mail program as directed on this page, update says my system is u

    I have many problems with my mail since I moved to mavericks. The filter is very sensitive, read mail appears as unread, I can't drag mail to the folders and more. I can't update the mail program as directed on this page, update says my system is updated

    I don't think that a software update from Apple will solve the issues that you are having. You have a rogue installation. After you posted I have just done the following:
    Disk Utility can verify  my partitioned Volume (including my boot disk) AND REPAIR the non-boot disks on the same Volume without a glitch. It repairs the non-boot disks containing data smoothly.
    I have used Mail to send some mails from some Yahoo and Hotmail accounts to my Thunderbird client containing GMail accounts - absolutely normal.
    I have iLife '09 but my iMovie '09 and iPhoto '09 open in a jiffy and I see no issues here. I have 6GB RAM (Maximum) on an early 2008 Macbook Pro with a 750GB hard drive partitioned with 120GB reserved for the Boot Drive.
    I am sorry that I cannot help further but I am sure there must be a way to reinstall the software without having to revert to restoring your ML backup. I have two clones and if you have such I would attempt to do that through that rather than through Time Machine - that is of course if you have a cloned drive.
    Good luck!

  • There appear to be big problems with Mavericks Mail, particularly if it's used for Gmail. Have other users noticed that it slows to a crawl and can't reload the contents of a folder instantly....Is there a fix coming?

    There appear to be big problems with Mavericks Mail, particularly if it's used for Gmail. Have other users noticed that it slows to a crawl and can't reload the contents of a folder instantly....Is there a fix coming?

    There is a large thread relating to Gmail, but nothing that sounds like that.
    Nobody here knows what Apple is going to do.
    You might try removing the Gmail account and then add it back in.

  • Problem with Mavericks Mail and Exchange 2013

    Hello,
    I have just updated to Mavericks a few days ago. Now I have a strange problem.
    The setup with Exchange 2013 works fine ... so I can send&receive mails.
    The problem: I only get new mails. All (few thausand) mails stored on the Exchange account are not synced to mail?!
    Maybe anyone has an idea how to solve this ...
    Thanks,
    Marc

    Some problems with Exchange mail have been solved by disabling Autodiscovery. If that doesn't work, see below.
    Back up all data. Delete the Exchange account from the Internet Accounts preference pane and add it back. If there's still no improvement, continue.
    Quit Mail. Force quit if necessary.
    Back up all data. That means you know you can restore the Mail database, no matter what happens.
    Triple-click anywhere in the line below on this page to select it:
    ~/Library/Mail/V2/MailData
    Copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
    Go ▹ Go to Folder
    from the menu bar. Paste into the box that opens (command-V), then press return.
    A folder window will open. Inside it there should be files with names as follows:
    Envelope Index
    ExternalUpdates.storedata
    Move those files to the Desktop, leaving the window open. Other files in the folder may have longer names that begin as above. Move those files, if any, to the Trash.
    Log out and log back in. Relaunch Mail. It should prompt you to re-import your messages. You may get a warning that the index is damaged and that Mail has to quit. Click OK.
    Test. If Mail now works as expected, you can delete the files you moved to the Desktop. Otherwise, post your results.

  • HT5361 Today, I experienced a problem with my mail. the time and date on each email received and sent is 18-06  and the date is 22nd July irrespective of the actual time

    Today, I experienced a problem with my mail. the time and date on each email received and sent is 18.06 and date as 22nd July. Thank you  John

    Incorrect date or time displayed in various applications

  • HT1338 has anyone else had problems with their mail not loading properly and the multi gestures stopped working on their mac pro after new updates?

    has anyone else had problems with their mail not loading properly and the multi gestures stopped working on their mac pro after new updates?

    Have you tried calling Apple tech support?
    http://www.apple.com/contact/

Maybe you are looking for

  • Inventory data verification BW vs R/3

    Hi Experts, I'm working in support projects, my user raised issue on inventory report is tie with R/3 report. please make note, my inventory report based on standard Inventory infocube 0IC_C03. When I generate report by plant for the valueated stock

  • Database upgradation issue

    Hi All, After upgrading the database to 10.2, select COMP_NAME,VERSION,STATUS from dba_registry; shows Oracle Ultra Search 9.2.0.7.0 NO SCRIPT what can be the reason ? Regards, Neeraj

  • HT204023 I was working with it but suddenly after a while i couldnt even see the icon

    I was working with it but after a while I couldnt even see the icon .. Funny ha???

  • Transaction with the server failed error 405

    HI, Thanks in advance. We are working on the MDM service provided by apple using the iPCU and have configured the server with valid certificate. But still we notice some other error. Please help us to resolve this. Error: (Error) MDM: Cannot Authenti

  • OCIBreak() equivlant on a windows server

    The 10G Oracle Call Interface documentation states: "OCIBreak() is not supported on a Windows server" My question is: "What alternatives does Oracle offer for the Windows server?"