ASA write mem error in context

ASA#                                                                                (this is system context)
context context
  allocate-interface Port-channel2.1 INSIDE
  config-url disk0:/configs/context.cfg
  join-failover-group 1
i get following error in the context:
ASA/context# wr mem
Building configuration...
Cryptochecksum: 572d8a11 d1d409a0 ff1f3f82 16b31d26
%Error opening disk0:/configs/context.cfg (No such file or directory)
Error executing command
[FAILED]
how to resolve it?

Hi,
I very rarely have to play around with the Files and Folders of the ASA firewalls since once you originally set them up you dont really need to do anything more.
Only thing that came to mind fast is that you have:
Configured the context
Configured the "config-url" under the context
BUT you have NOT created the folder beforehand to the disk0:/
I don't remember if the "config-url" created the said folder but this might be something to check (as the error message states)
Check the Flash memory with
dir disk0:
Create the folder if need with
mkdir disk0:/configs/
Hope this helps
- Jouni

Similar Messages

  • Weird error when doing "write mem"

    Whenever I performed "write mem", I am
    getting this error:
    NYC#wr
    Building configuration...
    % Configuration buffer full, can't add command: line vty 0
    %Aborting Save. Compress the config.[OK]
    NYC#
    NYC#wr
    Building configuration...
    % Configuration buffer full, can't add command: line vty 0
    %Aborting Save. Compress the config.[OK]
    NYC#
    Basically, I can not save my config into
    the flash. How can I fix this? Thanks.
    David
    NYC#sh ver
    Cisco Internetwork Operating System Software
    IOS (tm) C2600 Software (C2600-IK9O3S3-M), Version 12.3(12), RELEASE SOFTWARE (fc3)
    Technical Support: http://www.cisco.com/techsupport
    Copyright (c) 1986-2004 by cisco Systems, Inc.
    Compiled Mon 29-Nov-04 15:40 by kellythw
    Image text-base: 0x80008098, data-base: 0x819F9E70
    ROM: System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)
    ROM: C2600 Software (C2600-IK9O3S3-M), Version 12.3(12), RELEASE SOFTWARE (fc3)
    NYC uptime is 2 days, 8 hours, 38 minutes
    System returned to ROM by power-on
    System restarted at 03:21:09 UTC Wed Feb 21 2007
    System image file is "flash:c2600-ik9o3s3-mz.123-12.bin"
    This product contains cryptographic features and is subject to United
    States and local country laws governing import, export, transfer and
    use. Delivery of Cisco cryptographic products does not imply
    third-party authority to import, export, distribute or use encryption.
    Importers, exporters, distributors and users are responsible for
    compliance with U.S. and local country laws. By using this product you
    agree to comply with applicable laws and regulations. If you are unable
    to comply with U.S. and local laws, return this product immediately.
    A summary of U.S. laws governing Cisco cryptographic products may be found at:
    http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
    If you require further assistance please contact us by sending email to
    [email protected].
    cisco 2621 (MPC860) processor (revision 0x102) with 59392K/6144K bytes of memory.
    Processor board ID xxxxxxx (xxxxxxx)
    M860 processor: part number 0, mask 49
    Bridging software.
    X.25 software, Version 3.0.0.
    3 FastEthernet/IEEE 802.3 interface(s)
    32K bytes of non-volatile configuration memory.
    16384K bytes of processor board System flash (Read/Write)
    Configuration register is 0x2102
    NYC#

    i got the same error..
    Richardson-CE1(config)#wr        do wr
    Building configuration...
    % Warning: Saving this config to nvram may corrupt any network management or security files stored at the end of nvram.
    Continue? [no]:
    % Configuration buffer full, can't add command:  description ALLOW-GRE-IPSEC-PREFIXES-FROM-MIXME-ROUTER
    %Aborting Save. Compress the config, Save it to flash or Free up space on device[OK]
    Richardson-CE1(config)#
    i did service compress-config but the router is very slow right now.. any thoughts what might be causing the slow response of the device?

  • Error when doing a write mem on 3525 router

    When I change the config on our 3525 router and then do a write mem command I get the following.
    [OK]private-config file open failed (File table overflow)
    Any one seen this?
    Mike

    Sorry...I had the info just forgot to put it in the question...just grabbed it again.
    3825#show ver
    Cisco IOS Software, 3800 Software (C3825-ADVIPSERVICESK9-M), Version 12.4(20)T1, RELEASE SOFTWARE (fc3)
    Technical Support: http://www.cisco.com/techsupport
    Copyright (c) 1986-2008 by Cisco Systems, Inc.
    Compiled Wed 24-Sep-08 18:40 by prod_rel_team
    ROM: System Bootstrap, Version 12.4(13r)T10, RELEASE SOFTWARE (fc1)
    PRS_3825 uptime is 9 weeks, 42 minutes
    System returned to ROM by power-on
    System restarted at 22:11:16 CET Tue Oct 28 2008
    System image file is "flash:c3825-advipservicesk9-mz.124-20.T1.bin"
    This product contains cryptographic features and is subject to United
    States and local country laws governing import, export, transfer and
    use. Delivery of Cisco cryptographic products does not imply
    third-party authority to import, export, distribute or use encryption.
    Importers, exporters, distributors and users are responsible for
    compliance with U.S. and local country laws. By using this product you
    agree to comply with applicable laws and regulations. If you are unable
    to comply with U.S. and local laws, return this product immediately.
    A summary of U.S. laws governing Cisco cryptographic products may be found at:
    http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
    If you require further assistance please contact us by sending email to
    [email protected]
    Cisco 3825 (revision 1.2) with 487423K/36864K bytes of memory.
    Processor board ID FCZ123772WN
    2 Gigabit Ethernet interfaces
    35 Serial interfaces
    3 Channelized/Clear E1/PRI ports
    1 Virtual Private Network (VPN) Module
    4 Voice FXO interfaces
    DRAM configuration is 64 bits wide with parity enabled.
    479K bytes of NVRAM.
    125440K bytes of ATA System CompactFlash (Read/Write)
    Configuration register is 0x2102

  • Failover exec active write mem

    Hi Everyone,
    I was doing config change on firewall  in multicontext mode.
    IT has 2 contexts  admin and X.
    I log into admin context via ASDM and switch to context X with the  ASDM as  need to make changes to context firewall X.
    When i config the changes via asdm and click on apply it show me message
    failover exec active write mem followed by ACL which i was going to apply.
    Need to confirm if above command is safe to run on production network without causing any issues?
    Finally i logged into Context X which was admin for that and made the chnages via CLI.

    hi mahesh,
    i'm suspecting you're making changes in context x from the standby unit. you could verify with show failover command.
    it's safe to assume to issue a failover exec active write mem since you're just saving the config for the active unit.
    you could alternatively use the write memory all command to save the system and all context config changes.

  • Write mem via SNMP?

    Is there any way to perform a "write mem" or "copy run start" via SNMP (snmpget) on IOS, CatOS or PIX/ASA?

    Thanks! I thought it wasn't possible, but I should've searched:
    http://forums.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Network%20Infrastructure&topic=Network%20Management&CommCmd=MB%3Fcmd%3Dpass_through%26location%3Doutline%40%5E1%40%40.1dd9fd99/0#selected_message
    In the above thread, Nadim gave an example in which ccCopyEntryRowStatus was set to "5:createAndWait", whereas in the URL you pointed out "createAndGo(4) : Create an entry" and "destroy(6) : Delete an entry" were suggested. Would you know what the differences are between 4 (createAndGo) and 5 (createAndWait), specifically which one would you choose to commit a "write mem"?
    Secondly, how is the random number below generated? Is that my choice?
    snmpset -v 1 -c private
    .1.3.6.1.4.1.9.9.96.1.1.1.1.2. integer 1
    .1.3.6.1.4.1.9.9.96.1.1.1.1.3. integer 4
    .1.3.6.1.4.1.9.9.96.1.1.1.1.4. integer 1
    .1.3.6.1.4.1.9.9.96.1.1.1.1.5. ipaddress ""
    .1.3.6.1.4.1.9.9.96.1.1.1.1.6. octetstring ""
    .1.3.6.1.4.1.9.9.96.1.1.1.1.14. integer 4

  • "write medium error" when trying to burn a music cd

    i've tried a few different times to burn a cd on my itunes and the same thing happens every time: i insert a black disk and my computer begins to make a noise that sounds not unlike grinding. the progress bar at the top of the itunes box says it is checking the songs, then initializing the burn, which it does for a couple minutes. then it says it is finalizing the burn, and spits the cd back out at me. a message then pops up on the screen which tells me that the cd was unable to burn because of a "write medium error." any help in this area will be greatly appreciated.
    p.s. i also tried downloading and installing the new itunes, as well as restarting my computer, all with the same effect.
    p.p.s. i'm using a macbook pro.

    seenabeena,
    Same exact thing was happening to me and was very frustrating. I was able to burn anything on from my itunes and then for whatever reason I started experiencing the same issues you are having. Don't know why it made a difference but someone here suggested using different brand of CD's. Guess the cheaper CD's are harder to read when it comes to the laser calibration. This isn't a endorsement at all but seems I've been able to burn anything again on the "imation" brand CD blanks. I hope this helps. Also, make sure you don't burn at anything higher than 8X when you start.
    Carl

  • Error during context generation

    Dear Friends,
    In interactiveForm UI, when i put adobe form name in Templatesource and try to generate context automatically,
    i get an error message ' Error during context generation ' and an empty context node is created.
    i manually create attributes under that node and populate them in wddoinit method.
    but i dont get those values on PDF output.
    What may be the error ??
    Kindly suggest.

    Hi Otto,
    I want to display data of an internal table in adobr form using web dynpro abap and adobe interactive form.
    my web dynpro abap application is ready and adobe form is also ready.
    when i integrate adobe interactive form on WDA and put form name in TEMPLATESOURCE and press enter
    it throws an error message - 'Error in context generation' and an empty node is generated in WDA.
    on running the application adobe form is displayed but no data is displayed.
    what may be the error ?
    i maintained attributes of node manually but then also no data is displayed.
    that means data binding is not successful.
    what may be the case ???
    kindly suggest

  • Write Back Error in  OBIEE 11.1.1.7.150120

    Hello everybody,
    i have a problem with the writeback capabilities of OBIEE 11.1.1.7.150120.
    After the Migration from 10g to 11g i would like to customize the write back in 11g. I go like Oracle BI Practice: OBIEE 11g Configure Writeback this, but getting an OBIEE error:
    "Write Back Error
    An error occurred while writing to the server. Please check to make sure you have entered appropriate values. If the problem persists, contact your system administrator."
    The table does not have any constraint. I would like to insert for example the value "2".
    In my table properties i fill in "filling".
    My ...\bifoundation\OracleBIPresentationServicesComponent\coreapplication_obips1\analyticsRes\customMessages\writeback.xml looks like that:
    <?xml version="1.0" encoding="utf-8" ?>
    <WebMessageTables xmlns:sawm="com.siebel.analytics.web/message/v1">
    <WebMessageTable lang="en-us" system="WriteBack" table="Messages">
    <WebMessage name="filling">
    <XML>
    <writeBack connectionPool="Connection Pool">
    <insert> </insert>
    <update>update analyticmodel.last_runtimes set laru_exec = @1, laru_runtime_start = sysdate </update>
    </writeBack>
    </XML>
    </WebMessage>
    <WebMessage name="machine_filling">
    <XML>
    <writeBack connectionPool="Connection Pool">
    <insert> </insert>
    <update>update analyticmodel.machine_filling set mf_mach_id = @{c0}</update>
    </writeBack>
    </XML>
    </WebMessage>
    </WebMessageTable>
    </WebMessageTables>
    Thank you very much
    Best regards
    Christian

    Hi Cristian,
    You must use '' at script when call some column value. (use '@1' instead of @1)
    Tip.. note you can use your "WebMessage Name" (from your script, like "filling", "machine_filing") into your analisys.
    Hope this help
    Felipe Idalgo

  • Premiere Elements 11 Download - Write Disk Error

    Hello,
    I purchased Adobe Premier Elements 11 from Amazon.com the day before yesterday and keep getting a Write Disk Error during the download. I have tried repeatedly to download, and to 2 different computers but have gotten this error (and 'invalid checksum' which went away after the first couple of tries; I also turned off this check in the Disk Utility). In between download attempts, I move the downloader file and the incomplete Premiere 11 folder from the desktop of my MacBook Pro to trash, dump it, and restart the computer. I was able to successfully download and install Adobe Photoshop Elements 11 on both laptops so the problem is not the internet connection or the computers. Anyone know how to fix this problem?
    Thanks!
    Roma

    Nobody can know. It's most likely some indexing process/ tool or a backup like TimeMachine that all too eagerly inspects the files before they finish downloading and damges them in the process. Turn off any such stuff. You might also consider using otehr browsers. Safari is just completely awful and often damages files.
    Mylenium

  • IPod won't sync, gives 'Delayed Write Failed' error.

    I've had my iPod classic 80gb, for roughly a year now, and I never really had any permanent issues with it, until last week. I plugged it into my laptop and left it on over night. I wake up in the morning and all my songs and videos were gone. iTunes was reading the data as 'Other'. Overnight, without me doing a single thing, everything was gone. I unplugged it and plugged it back in, and all the files were gone. Completely. Space had been returned.
    I painstakingly put my songs back in that afternoon. The next day, I plugged the ipod into my office computer, and tried to sync my podcasts. After syncing about 20 files, iTunes froze. Then a yellow bubble popped up saying 'Delayed Write Failed' after which it wipes out everything I was able to sync.
    I've done everything, from restoring the ipod, to re-installing iTunes to formatting the disk to straight up performing a chkdsk. As i speak right now, my laptop won't boot up after i performed the last chkdsk, which told me i had a bunch of invalid sectors or some other. For one week, I've searched the net and it seems no-one has a solution to this.
    Any help? I don't have an Apple store in my country, and I don't want to believe that i have to get a replacement.

    1st - Sorry I can't help you.
    I also have iPod Classic 80gb and have had no trouble till two days ago (11/08). I connected my iPod and it showed up as a source in iTunes but none of my music was shown. I reconnected it and same thing, I checked for update for iPod but it said it was up to date. I then used iTunes to restore my iPod to factory settings. It went through the process and restarted but after that would never show up as a source in the iTunes window.
    When I connect the iPod to my PC it detects the USB Device as an iPod right way (so it doesn't seem to be a USB Driver issue) but then the "Auto-Play" window shows up and it makes my PC slow way down and then eventually I see the "Windows Delayed Write Failed" error mesage in the task bar. If I check My Computer it shows the iPod as a drive.
    I've done everything listed in Apples Support Page for this, from restoring the iPod, to re-installing iTunes, clearing temp folder and old registry files, updating iPod Service in MsConfig. I have also tried to sync the iPod with my other PC and see the same error so it seems the iPod is corrupted. I don't know anyway to restore factory settings again since it won't show up in iTunes anymore. I've searched the net and it seems no-one has a solution to this.

  • OBIEE 11G Write Back Error

    Hi All:
    I am testing the OBIEE 11G write back function. After all the steps , there's an Error message said "Write back Error" . No other detail information. Do you have any idea about where's the problem of it?
    My xml file was under the folder of 'C:\OBIEE11\Oracle_BI1\bifoundation\web\msgdb'. and the detail is as below.
    <?xml version="1.0" encoding="utf-8" ?>
    <WebMessageTables xmlns:sawm="com.siebel.analytics.web/message/v1">
    <WebMessageTable lang="en-us" system="WriteBack" table="Messages">
    <WebMessage name="write_back_test">
    <XML>
    <writeBack connectionPool="Connection Pool">
    <insert> </insert> <update>FACT_Writeback set MAX_LY2 = '@{c1}' where PERIOD_KEY = '@{c0}'
    </update>
    </writeBack>
    </XML>
    </WebMessage>
    </WebMessageTable>
    </WebMessageTables>
    Really Thanks for your help.
    Sunny.Sun

    Hi,
    I think these is a problem with your connection pool name, please check it. It's a name of connection pool in BI administrator.
    if it's not problem, Can you try my way, replace '@{c1}', '@{c0}' by @1, @2...with 1,2 is a number of column in Criteria.
    It's my template :
    <?xml version="1.0" encoding="utf-8" ?>
    <WebMessageTables xmlns:sawm="com.siebel.analytics.web/message/v1">
    <WebMessageTable lang="en-us" system="WriteBack" table="Messages">
    <WebMessage name="SetQuotaUseID">
    <XML>
    <writeBack connectionPool="WB_CONN">
    <insert> </insert>
    <update>UPDATE biee_map_revenue SET DIST_CODE=@5 WHERE REV_ID = @1 </update>
    </writeBack>
    </XML>
    </WebMessage>
    </WebMessageTable>
    </WebMessageTables>
    Edited by: OBIEE.vn on Feb 13, 2011 6:31 PM

  • Write Permission Error Save for Web Adobe CC 2014

    Upon downloading and installing the recently released CC '14 apps, I've run into a problem with Photoshop CC 2014.
    When I click "save for web" in the file menu, it returns an error message of "The operation could not be completed. A write permissions error has occurred."
    It seems like a standard permissions error, so I repaired disk permissions, removed plists and prefs from user library, eventually I uninstalled photoshop and reinstalled it, restarted the computer, all with no progress.
    I found another forum for CS5.5 that had a similar issue - with it's resolution being a permissions change on the preferences folder itself. For kicks, I tried this - again no progress.
    I need to use the save for web feature. It is not usable on my end. Let's figure this out.
    System Specs
    Late 2013 iMac 27''
    3.5GHz Intel Core i7
    32GB 1600 MHz DDR3 RAM
    NVIDIA GeForce GTX 780M 4096MB
    3.11 TB Fusion Drive
    Adobe Photoshop CC (2014)
    20140508.r.58 x64

    I had the same problem. And, I could not migrate settings. I found another thread about the same problem that suggested reset preferences on Photoshop launch, but that didn't work. the post also suggested to reset permissions for the library preference folder. Mine was fine.
    But to fix it I had to go to the main library Preferences folder and reset permissions for the Photoshop CC 2014 Paths file and Photoshop CC 2014 Settings folder.
    I am disappointed that Adobe shipped an upgrade with such a fundamental flaw. I feel I should say something disparaging and derogatory about Adobe quality control, about how as a loyal customer, using Photoshop since version 2.5 and a CC subscriber I expect better. But, I'll leave those remarks to others.

  • Using Photoshop CC I cannot save images to folder from Camera Raw as Tif. I get message 'write permission error'. I am using Widows 7 Professional.

    I have just changed to Photoshop CC from CS4 and cannot now save images from Camera Raw. I get message 'write permission error'. I assume there is some permissions setting which did not exist with CS4.
    I cannot progress unless I revert to CS4. What am I failing to do?

    See if the suggestions, here, help, although this was back with CS6-cloud, not CC, so may not apply 100%:
    http://forums.adobe.com/message/4758115
    I'd suggest that rather than deleting the file, you move it out of the folder to somewhere else, in case things get worse and you need to put it back.
    I found this by Googling the error message. 
    If you can't figure it out, you might post in the "Downloading, Installing and Set Up" or "Adobe Creative Cloud" forums  since it seems to be related to the Cloud updates, and not necessarily ACR plug-in functionality, and I've seen India support people actually tackle problems posted there, which rarely happens in the ACR forum, although an ACR engineer may sometimes pop in to answer questions, they'd be less likely to know how to fix deployment issues.

  • Writer initialisation error !  has this been resolved in CS3

    I can not encode a wmv from CS3 (since installing CS4) without getting the "writer initialisation error " message.
    Has there been any resolution to this issue or any one know a fix.?
    I do not wish to continually export an avi then create a wmv from that in Adobe Media Encoder(CS4) or MS Media Encoder.
    I know that works but the workflow is time consuming ,tedious and in efficient when all I want is "quick and dirty" preview wmvs direct from the timeline as I used to be able to do.
    Sidenote.  This forum setup  continues to be dire and unpleasant to use since it changed !.  Anyone having any sort of decent experience with it?  (How?)

    Thanx.Hunt
    After posting this morning, I discovered another little workflow that may help someone in this situation.
    The CS4 Media Encoder (standalone) will import a Sequence from a CS3 Premiere Project and export whatever...
    This at least saves the intermediate "Movie" File.
    Simply Add the Project to the A M Encoder and choose the sequence. (surprisingly...it works!)
    I guess that will have to do meantime.
    re the Forum...I have deliberately stayed away until now because of the frustration involved.  Only popping in on occassion to see if there are any signs of a CS4 update/fix/repair.  (I do not use the CS4 Premiere component at all now and wait patiently to see if they can even repair it at all)
    I do not know how anyone has the patience to come here and contribute while this site is in such a state!

  • "Unable to save the raw conversion settings. There was a write permission error."

    I just built a new workstation for processing photos using PS CS5. I use external drives to store my images as I find it easier for backing up as well as for when I want use my laptop for sorting, etc.. I copied over all my old "Collection" files, and of course, had to "fix" them once on the new machine. Once pointed in the right direction, the collections all fill out correctly.
    When I go to process a collection though, I encounter an odd problem I can't seem to sort out. I can delete files, rename files, copy/paste to the external drives, etc.. What I can't seem to do is add Labels, Ratings, or modify RAW settings. I mean, I can use ACR to make adjustments, I just can't seem to save them.
    The system just ignores label, rating commands completely. When I try to save an ACR adjustment I get this error. "Unable to save the raw conversion settings. There was a write permission error."
    The files are NOT write protected. I'm set up as the owner of my workstation, with complete control of the system. I can't seem to find any useful information about this error because the "write permission error" seems to only be happening on installs, so that's all I can find help for.
    My system:
    Intel Core i7 970@ 3.20GHZ
    24.0 GB RAM
    64-bit OS - Windows 7 Pro
    DX58S02 Motherboard
    NVIDIA GeForce GTX 580

    Thanks for replying. I've been going crazy trying to fix this.
    To answer your first question; I use sidecar XMP files. If everything from my archive was shot in RAW I'd try converting to DNG and see if embedding the changes directly in a file worked. Unfortunately, a lot of my old stuff was shot in JPG, so sidecars seems to be the best choice.
    When I add labels, ratings, as well as change RAW settings on files I place on my workstations HD everything works. It's only when I try to do these things with the same files on removable drives that I run into trouble. The drives I use are Transcend 640GB StoreJet 25ms connected via USB.
    I don't think it's a UAC problem. At least, to my understanding, doesn't that control how your machine alerts you to program changes? I looked into how to change ownership, and did so, but that didn't work. Here's a link to what I mean: http://www.addictivetips.com/windows-tips/windows-7-access-denied-permission-ownership/
    I'm stumped. I also hate the idea that I'll have to go through various folders to find images from already created collections, copy them to a new folder on my HD and then work on them. Then I'll have to put them all back... ugghhhh

Maybe you are looking for