ASA5505 - Cannot access the internet and use Teamviewer

Hi guys, I have a ASA5505 and I'm having trouble to achieve the following setup, block any kind of connection from outside except for IIS on port 80 and 443 but allow from the server to access any outside address, by domain or ip. Right now apps writen in C# on the server are throughing socket errors and Teamviewer remote control is not working, I would like it to replace remote desktop.
Could you take a look at my screenshot and give me any advise?
Thanks

Hi Paulo,
First, I You don't have to configure your ACLs like(source: any ==> Detsination: any). To permit anyone to access your server (example 192.168.1.1) use an ACL like this:
So, I recommend you to always specify the source and the destionation in your ACLs ( not any ==> any) !!
Best regards.

Similar Messages

I cannot access the internet, I tried to answer that said to go to settings, safari, tap clear history, cookies and cache, cut off, then on, but it did not work. When I go to internet the screen is grey??? please help I am a new user!!

I cannot access the internet the screen is grey, I have tried by using the answer from someone but it does not work...I went to settings, tap safari, then clear the history, cookies, and cache, then turn off ipad. When I did that twice, it did not work. How long does it take for the clear history to work? I am a brand new
user of the ipad2 and I am disappointed that this is happening already.

Have you been able to access the internet previously and now it's suddenly not working, or are you still trying to access the internet for the first time on your iPad? Are you at home trying to connect through your home router? If you are at home, did you put your home routers encryption code as your password? The encryption code is what your iPad is looking for and it is usually found on the router and is typically a 13 digit combination of letters and numbers. Let us know......

TS1398 my ipod touch worked fine on my wifi home network. After not using my ipod for a month or so, I cannot access the internet. All other devices work fine. Thus, its not my home wifi....I tried resetting...forgetting....nothing works...still cannot ac

hello - my ipod touch worked well until a couple of months of non-use. Now, I cannot access the internet thru my wifi. All my other devices have no such problem. I have tried resetting wifi, "forgetting network" turning wifi off and on....nothing works....can anyone help?

- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router.
- Reset networks settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- iOS: Recommended settings for Wi-Fi routers and access points
Does the iPod see the network? Error message? Does the iPod connect to other networks?

I installed Mountain Lion on my iMac. Now I cannot access the Internet. All the other computers and tablets have no problem. I did PRAM and MC reset, modem reset, etc., all the usual ju-ju. I also cannot connect on my local network to any other computer.

I installed Mountain Lion on my iMac. Now I cannot access the Internet. All the other computers and tablets on the network have no problem. I did PRAM and MC reset, modem reset, etc., all the usual ju-ju. I also cannot connect on my local network to any other computer. Yet Network control panel says I am connect to the modem, and Network Diagnosis says I am connected to the Internet. It's like the blind man who has eyes that cannot see. BTW, I am not some newbee. I have been a Machead since the early nineties and set up a half dozen networks, including the one I am using at home to which the iMac mysteriously is there but not. This has me stumped! I am considering going back to 10.7!

Select  ▹ System Preferences ▹ Network ▹ Advanced ▹ TCP/IP. What values are shown for the following:
Configure IPv4
IPv4 Address
Subnet Mask
Router

I did a software update on my ipad and now cannot access the internet. how can i fix this?

I did a software update on my ipad to 8.1 and now cannot access the internet. How do I fix this? My mail updates, but to get internet access I had to move from wifi to cellular data, and now even cellular data does not allow me access.

Hi Go to settings Reset Network Settings After Reset you need to enter your Router wireless key Before you do this turn off your Router for 30 seconds Also an option is to go on Websites for your make of Router look for any Firmware updates but you can do this later. Cheers Brian

How to restart base station from airport utility? I used to be able to do it remotely I currently use a Mac Pro 10.8.4 and have a time machine for wireless 6.3 (630.34). Sometimes I cannot connect to the internet and use network preferences to diagnose t

How to restart base station from airport utility? I used to be able to do it remotely
I currently use a Mac Pro 10.8.4 and have a time machine for wireless 6.3 (630.34). Sometimes I cannot connect to the internet and use network preferences to diagnose the issue. This results in being told to restart the wireless. The airport utility includes the drop down option of restarting but is not clickable so I can't choose it.
With my prior macbook and same time capsule, etc if i had problems connecting to the internet I would run network diagnostics to help out. This included clicking on the airport utility ---> base station --> restart. This worked most of the time.
Bottom line, is there something I am missing in not being able to restart the wi-fi remotely? ]
Thanks in advance

You are likely forgetting a step.
Open AirPort Utility
Click on the Time Capsule icon
Click Edit in the small window that appears
Now click the Base Station menu.....top of the screen....not the Base Station "tab" in the center of the screen
Click Restart

HT201269 why is it that when trying to use a back up of my old iphone i click on devices and the options are all frey scaled? I cannot access the restore and back upo options

why is it that when trying to use a back up of my old iphone i click on devices and the options are all frey scaled? I cannot access the restore and back upo options

Let me start with the general advise...
When you have a problem with one particular site, a good "first thing to try" is clearing your Firefox cache and deleting your saved cookies for the site.
(1) Bypass Firefox's Cache
Use Ctrl+Shift+r to reload the page fresh from the server.
Alternately, you also can clear Firefox's cache completely using:
orange Firefox button (or Tools menu) > Options > Advanced
On the Network mini-tab > Cached Web Content : "Clear Now"
If you have a large hard drive, this might take a few minutes.
(2) Remove the site's cookies (save any pending work first). While viewing a page on the site, try either:
* right-click and choose View Page Info > Security > "View Cookies"
* Alt+t (open the classic Tools menu) > Page Info > Security > "View Cookies"
In the dialog that opens, you can remove the site's cookies individually.
Then try reloading the page. Does that help?

I cannot retrieve the password for the wifi connection on my imac and so cannot access the internet with my ipad at home. I have a cable modem. Help please!

I cannot retrieve the password for the wifi connection on my imac and so cannot access the internet with my ipad at home. I have a cable modem. Help please!

If you mean that you cannot remember the password for your WiFi network this will work for you - or it should work if you are the administrator on the Mac.
You will need to be logged in as the administrator on your Mac and you must know the password - Open Keychain Access on your Mac in the utilities folder, click on Passwords. Find the Airport Network Password listed on the right. Double click on it. Click on show password in the the window that pops up. Enter your administrator password when prompted and click allow.
If Keychain is locked - you must enter the administrator password there as well to unlock it and access the password.
If you have set the Mac up for Internet Sharing for the iPad to share the Mac's connection, just create a new network On the Mac with Internet sharing and a new password.

When I open a second Profile while another is running the second cannot access the Internet until I close the first. Why?

I often have occasions to run more than one Profile simultaneously (usually because of different add-ons I've installed on different Profiles). In the past this worked fine. Now, all of a sudden, if I open a second Profile while the first is running the second cannot access the Internet until I close the first. It keeps looking for a website, and failing, until the system "times out". If I close the first Profile, the second is then able to access the Internet.
Note: this is not a problem with opening a second Window in Firefox. As long as they are from the same Profile they will both work fine. Nor does this stop me from using a second Profile to look at website files I have saved to my computer. The only problem is that the second Profile cannot get on the Internet.

I just checked, the setting was for "Automatic proxy configuration URL", in the past it was set on "No Proxy". So I'll try changing that (and/or try other proxy options), and see if that solves the problem.
If it does, then just one (academic) question remains: why did that happen in the first place? I don't care what the answer is, so long as your suggestion solves the problem.
Thanks.

Is there a way to access the web-based setup for my router if I cannot access the internet?

Okay, I need to change the ip address settings on my router. I have a WRT54G Wireless router. I cannot access the internet on my computer connected to the router, and do not know how to change the router settings without accessing the web-based setup page. So, back to my question. Is there a way to access this page if I cannot connect to the internet?

On the back of the router is a small reset switch. Using a paper clip or other small item, press the switch in and hold it for a few seconds. This will reset the router to the default IP address of 192.168.1.1. Enter that address in your web browser, and be sure your computer is attached to the router by an Ethernet cable. Don't attempt to do this using the wireless connection.
Once you have reached the web configuration utility you can change the DHCP settings.
To give your PC a static IP address you will need to open your network connections panel and, assuming your using Windows XP, make the changes from dynamic IP to static there.

Equium P200-1IR - Wireless is connected but cannot access the internet

Hi ya,
Need a little help!!
I have just bought an Equium P200-1IR.
I have turned the wi fi on.
I can see my router which is Talk Talk.
I can get the laptop to connect to the router and it says that I am connected,
however I cannot access the internet.
I tried the same process by inserting a wi fi dongle into the USB port
on the laptop and exactly the same happens.
We have other computers in the house that connect to the router and internet
ok using the wireless dongle.
I have plugged a hard wire connection from the laptop to the router and I can
access the internet immediately with no problems, however would love
to use the wireless feature.
Any help really appreciated....Thanks
Waynec

Do you use the right channel and right encryption settings?
This should be checked!
It should be able to change the WLan channels in device manager -> WLan card -> Properties -> Advanced tab
But I would also recommend disabling the encryption and password in router settings and to connect to Open Wlan of course this should be done only for testing purposes if the notebook would be able to connect to the open router, then this would mean that you used a wrong password.
How about WLan driver update? Did you update the WLan driver? If not do that!

I am connected to my wireless network but cannot access the internet. Any ideas?

I am connected to my wireless network but cannot access the internet. Any ideas?

Your router may not have given your iPad a valid IP address. Go to Settings > Wifi > your network name and touch the ">" to the right to see the network details. If the IP address starts with 169 or is blank then your router didn't provide an IP address and you won't be able to access the Internet.
Sometimes the fix can be as simple as restarting your router (remove power for 30 seconds and restart). Next, reset network settings on your iPad (Settings > General > Reset > Reset network settings) and then attempt to connect. In other cases it might be necessary to update the router's firmware with the latest from the manufacturer's support web pages.
If you need more help please give more details on your network, i.e., your router make, model and version, the wifi security being used (WEP, WPA, WPA2), etc.

WRT54G router cannot access the Internet

My wireless PC can access the router but cannot access the Internet.
When I ping linksys.com - the ping times out; however, when I ping my ISP I get 4 pings back. When I ping the router the ping is successful as I get 4 pings back.
I am sure there is a fix for this problem. Can anyone help me get connected to the internet?
Thanks
I just got DSL in my area and installed it. I have a Linksys WRT54G router and a zyxek 660R DSL modem. I have a PC #2 in the room down the hall and a PC #1 in another room. I have a Wireless-G USB adapter in PC #2 (this is the antenna for the wireless connection). Everything is installed and PC #1 can connect to the internet through the modem and router. However PC #2 can only reach the access point (router) and will not access the internet. I can connect to the internet for PC #2 when an ethernet wire is used directly but it is not great to have a wire running down the hall. I pinged the router from PC #2 and the echos look fine. So it can certainly reach the router. When I use the Local Network tab and click on DHCP Clients table both PCs are displayed. So how can a PC use a wireless connection to reach the internet? I have spent 4 days already trying to get this to work. My ISP can't seem to help.
Thanks for your help.

hi... logon to router's setup page and try changing channel to 1 or 11, click on the advanced wireless settings and try reducing beacon interval to 50, fragmentation and RTS threshold to 2304, also try upgrading latest firmware on the router...also
if you are using Win XP system try uninstalling the adapter from the computer...click on start >> programs >> wireless G USB adapter >> uninstall, put the CD in for the adapter and restart the computer, one window pops up "found new hardware" try installing the drivers, no need to install WLAN software or utility and use windows WZC (wireless zero configuration) to manage wireless connection...check whether it works for you or not and let me know the results.

Why can one mac access the internet and not the other?

Hi I have just installed a 2nd generation Airport Express base station. I have setup a network and I can connect to it to access the web. Here's the rub, only my Macbook Pro can connect. My Macbook Air cannot connect? A weird error message says (translated from Swedish): Airport has the selfapplied/selfselected IP adress 169.254.67.130 and will not be able to connect to the internet.
Why can one mac access the internet and not the other? Is there something simple that I can do to get more macs to be able to use my Airport Express to access the internet?
Tech details:
Airport Express 2nd generation (just purchased) model 1392
Macbook Pro running 10.8.2
MacBook Air running 10.6.8

It seems the Airbook assigns a dummy IP address so somehow it doesn't reach and receive an IP from the Express. I deleted the previous Express setting restarted the Air connected again, restarted the modem, restarted the Express nothing....
I spoke to the internet provider and the cable modem does not require any username or pw. from the modem to the cable it's one public ip, pure internet is flowing from the modem to the Express but the express doesn't seem to assign any IP address apart from the one assigned to the Macbook Pro.
Do you need a screendump of the settings on the functioning Mac or the faulty one? What settings are you interested in i.e. which tab should it shot?

Apple Applications cannot Access the Internet, Others can

I've owned my MacBook for about 1.5 years now and it's starting to have some stability issues. Daily hard-locks are becoming the norm. I suspect hard drive issues may be to blame. I have repaired permissions and verified and repaired the disk. That seemed to help for a little while, but this latest problem is throwing me for a loop...
Apple applications cannot access the Internet. Apple Mail (RSS, POP, ad IMAP), Safari, iTunes (PodCasts, iTunes Store), and Software Update all time out while trying to contact servers. Firefox, OpenVPN, command line SSH, ping, etc, all have no problems.
My next step is a reformat, but this week is a really inconvenient time for me to do a backup and restore and I'd love a quick-fix if there is one. Any suggestions?

Thanks. I just realized that is was serious user error. I forgot I had enabled Socks proxy in Internet connections a couple of days ago and that my Mac apps would still be using that while my other apps would not. Thanks!

ASA5505 - Cannot access the internet and use Teamviewer

Similar Messages

Maybe you are looking for