ASA5505 Loading a template config doesn't allow me to connect via ASDM & SSH

Hi All,
I have built a base template for the ASA5505, i login via the ASDM and backup the configuration. Once i have backed it up and got the next customer i configure the ASA so i can gain ASDM access then reload the config using "Merge".
I then have sent this out with the engineer we have plugged it all in and i'm unable to login to the device via ASDM or SSH i get to login but its as if it doesn't accept the username and password.
Does anybody have any idea's?
Thanks
Nathan

Just to add more detail, DNS settings are fine for both PTR (numeric / reverse) or A/CNAME (address) record lookups. All resolve perfectly fine and confirmed against another system which is working fine (sadly not running Snow Leopard).
On my MBP running Snow Leopard with the 'Network Diagnostics' application running, the "Internet" connection shows "up" (green) for 2 seconds, then "down" (red) for 4 seconds and cycling continuously between these two states. The application itself fails to complete the test, constantly alerting of "Network Change Detected" suggesting the network configuration has changed.
Being a UNIX systems engineer, I thought running a dtrace on both the 'Network Diagnostic' app and Safari would show up something but sadly highlighted nothing (I'm assuming Apple have disabled dtrace's ability to snoop system calls from these apps and others for whatever reason). I also wondered if the network interface (en0) was changing whilst the state is toggling between failed and passed in the 'Network Diagnostic' app but ifconfig constantly shows the interface in an "UP" state... I just did an unscientific "while true; do ifconfig en0 | grep mtu ; sleep 1 ; done" to display the interface state in a Terminal window on a regular basis.
I think the biggest irony is, it all works fine when browsing to the www.apple.com website - it's never "Safari can't find the server" on me yet! Ah well, I'll have another look at this tomorrow if I get time

Similar Messages

Error message doesn't allow iPhoto to connect to order books/prints

i get this messager repeatedly while trying to order books, prints, and publish my photos via my .mac account. AN ERROR OCCURRED WHILE CONFIRMING YOUR ACCOUNT INFORMATION. PLEASE CHECK YOUR NETWORK CONNECTION AND TRY AGAIN. i already checked time/date, my connection is fine, my computer is clean, what can this be?????

I am experiencing this same problem tonight. Did you resolve this problem? If so, how? This is the first time this has happened to me. I know it's not a problem with my account, because I am able to sync my iDisc, log into my .mac account on Safari, etc. The problem seems to be limited to iPhoto.

Using Office 2013 group policy template to define Trusted Locations and Template Locations doesn't work

User Configuration/Policies/Administrative Templates
- Using Office 2013 group policy template to define Trusted Locations and Template Locations doesn't work
Microsoft Word 2013/Word Options/Security/Trust Center/Trusted Locations
- Allow Trusted Locations on the network:
Enabled
- Trusted Location #1:
Enabled
Path: //server/sharedfoldername [Edit: Path:
\\server\sharedfoldername]
Date: June 10, 2013
Description: Trusted Location
Allow sub folders: Enabled
The policy appears to apply to the client correctly by adding the following registry key and values:
HKEY_CURRENT_USER\Software\Policies\Microsoft\office\15.0\word\security\trusted locations\location1
allowsubfolders: 1
date: June 10, 2013
Description: Trusted Location
Path: //server/sharedfoldername [Edit: Path:
\\server\sharedfoldername]
However, when you open Word Options/Trust Centre/Trust Centre Settings…/Trusted Locations
There are no trusted locations listed under ‘Policy Locations’
I have tried setting similar settings for setting the Shared Templates folder location and just like the trusted locations policy, the registry keys are created properly in HKEY_CURRENT_USER\Software\Policies however word doesn’t
seem to recognize these either.
This used to work flawlessly using the administrative templates for Word 2007 and 2010. Has anyone been able to get these policies to apply successfully, or know why office doesn’t recognize these settings from the Policies registry
Key?

This would have been an easy solution to the issue. Unfortunately it isn't the problem. This question was originally posted on another Microsoft site and
was transferred here and when it was transferred the path's changed from the original post:
\\server\sharedfodlername to //server/sharedfoldername. (I will edit the question to show up as it did in the original post) Not sure how that happened. This
is still an issue that I haven't been able to get working correctly.
As it turns out the 'New from Template' interface Word 2013 has developed is very bulky with large thumbnails and is not very customizable nor practical for an office
that has a large number of templates. Because I am unsatisfied with the display and performance of the 'New' template chooser I sought after a solution to change the way word creates a document from a template in another thread:
http://answers.microsoft.com/en-us/office/forum/office_2013_release-word/how-can-you-change-the-display-of-templates-in/d49194b9-a6b4-4768-8502-7d7b50e9dd65 working through this issue with Jay we were able to develop
some VB script with handles a very large number of templates in a list view and it works much faster than the built-in Word interface. The above thread is how I've worked around trying to define a shared template location and I am quite happy with it.

Problem weblogic 9.2 with quartz and log4j : url-template-config.xml

Hello,
I configure a Servlet Quartz to run when WebLogic 9.2 starts, but i have an exception, here is my log :
2009-04-15 11:52:52,424 ERROR Logger.error(): Exception while loading URL templates, /WEB-INF/url-template-config.xml
Throwable: javax.servlet.ServletException: error: The document is not a url-template-config: document element namespace mismatch expected "" got "http://www.bea.com/servers/weblogic/url-template-config/8.0"
Stack Trace:
javax.servlet.ServletException: error: The document is not a url-template-config: document element namespace mismatch expected "" got "http://www.bea.com/servers/weblogic/url-template-config/8.0"
     at org.apache.beehive.netui.core.urltemplates.URLTemplatesFactory.getTemplates(URLTemplatesFactory.java:131)
     at org.apache.beehive.netui.core.urltemplates.URLTemplateDescriptor.load(URLTemplateDescriptor.java:133)
     at org.apache.beehive.netui.pageflow.PageFlowContextListener.performInitializations(PageFlowContextListener.java:102)
     at org.apache.beehive.netui.pageflow.PageFlowActionServlet.init(PageFlowActionServlet.java:120)
     at com.bea.console.internal.ConsoleActionServlet.init(ConsoleActionServlet.java:185)
     at javax.servlet.GenericServlet.init(GenericServlet.java:256)
     at weblogic.servlet.AsyncInitServlet.initDelegate(AsyncInitServlet.java:94)
     at weblogic.servlet.AsyncInitServlet.init(AsyncInitServlet.java:78)
     at weblogic.servlet.internal.StubSecurityHelper$ServletInitAction.run(StubSecurityHelper.java:276)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
     at weblogic.servlet.internal.StubSecurityHelper.createServlet(StubSecurityHelper.java:68)
     at weblogic.servlet.internal.StubLifecycleHelper.createOneInstance(StubLifecycleHelper.java:58)
     at weblogic.servlet.internal.StubLifecycleHelper.<init>(StubLifecycleHelper.java:48)
     at weblogic.servlet.internal.ServletStubImpl.prepareServlet(ServletStubImpl.java:493)
     at weblogic.servlet.internal.WebAppServletContext.preloadServlet(WebAppServletContext.java:1688)
     at weblogic.servlet.internal.WebAppServletContext.loadServletsOnStartup(WebAppServletContext.java:1665)
     at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1585)
     at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:2678)
     at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:874)
     at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:326)
     at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:114)
     at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:204)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:26)
     at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:60)
     at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:25)
     at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:640)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:26)
     at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:252)
     at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:154)
     at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:80)
     at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:176)
     at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:347)
     at weblogic.management.deploy.internal.DeploymentAdapter$1.activate(DeploymentAdapter.java:50)
     at weblogic.management.deploy.internal.AppTransition$2.transitionApp(AppTransition.java:30)
     at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:232)
     at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:168)
     at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:122)
     at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:173)
     at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:89)
     at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
     at weblogic.work.ServerWorkManagerImpl$WorkAdapterImpl.run(ServerWorkManagerImpl.java:518)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:179)
Caused by: org.apache.xmlbeans.XmlException: error: The document is not a url-template-config: document element namespace mismatch expected "" got "http://www.bea.com/servers/weblogic/url-template-config/8.0"
     at org.apache.xmlbeans.impl.store.Locale.verifyDocumentType(Locale.java:449)
     at org.apache.xmlbeans.impl.store.Locale.autoTypeDocument(Locale.java:354)
     at org.apache.xmlbeans.impl.store.Locale.parseToXmlObject(Locale.java:1270)
     at org.apache.xmlbeans.impl.store.Locale.parseToXmlObject(Locale.java:1254)
     at org.apache.xmlbeans.impl.schema.SchemaTypeLoaderBase.parse(SchemaTypeLoaderBase.java:345)
     at org.apache.beehive.netui.core.urltemplates.schema.UrlTemplateConfigDocument$Factory.parse(Unknown Source)
     at org.apache.beehive.netui.core.urltemplates.DefaultURLTemplateFileParser.parse(DefaultURLTemplateFileParser.java:34)
     at org.apache.beehive.netui.core.urltemplates.URLTemplatesFactory.getTemplates(URLTemplatesFactory.java:118)
     ... 43 more
The problem may be a conflict with the different version. My versions are quartz-1.6.0.jar, log4j-1.2.15.jar.
When i rename the file url-template-config.xml i don't have this exception but just a log4j Warning but i don't know if it's not dangerous for my application (run with WebLogic 9.2) if i rename this file.
Can you give me a solution to remove this exception or tell me if rename this file it's not dangerous ?
Thank you,
MH.

url-template-config.xml is part of Apache Beehive. This file is used to provide a template mechanism for URL's. Is your application using Apache Beehive purposefully?
http://beehive.apache.org/docs/1.0.2/netui/apidocs/javadoc/org/apache/beehive/netui/core/urls/URLRewriterService.html
If not, you may have inadvertently added a reference to Apache Beehive when you created the application and now there are references to the Apache Beehive shared libraries in either weblogic-applicaiton.xml or weblogic.xml

Url-template-config Error Deploying app in WLS9.1

I am trying to deploy my application in WLS9.1 and using jdk1.5.0_08. I am getting url-template-config error. There is this file "url-template-config.xml"at
\weblogic91\server\lib\consoleapp\webapp\WEB-INF which is where this error arises and inside that file the schema definition is:
<url-template-config
xmlns="http://www.bea.com/servers/weblogic/url-template-config/8.0"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://www.bea.com/servers/weblogic/url-template-config/8.0 url-template-config.xsd">
Why is weblogic 9.1 using a 8.0 defined template and is this the main problem? Please do help me out.
-Thanks

Hi
Did you get solution for url-template-config issue with weblogic 9.1 . Iam also getting the same error
15:23:22,531 [[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'] ERROR URLTemplateDescriptor:152
- Exception while loading URL templates, /WEB-INF/url-template-config.xml
Throwable: javax.servlet.ServletException: error: The document is not a url-template-config: document element namespace mismat
ch expected "" got "http://www.bea.com/servers/weblogic/url-template-config/8.0"
Stack Trace:
javax.servlet.ServletException: error: The document is not a url-template-config: document element namespace mismatch expected
"" got "http://www.bea.com/servers/weblogic/url-template-config/8.0"
at org.apache.beehive.netui.core.urltemplates.URLTemplatesFactory.getTemplates(URLTemplatesFactory.java:131)
at org.apache.beehive.netui.core.urltemplates.URLTemplateDescriptor.load(URLTemplateDescriptor.java:133)
at org.apache.beehive.netui.pageflow.PageFlowContextListener.performInitializations(PageFlowContextListener.java:102)
at org.apache.beehive.netui.pageflow.PageFlowActionServlet.init(PageFlowActionServlet.java:120)
at com.bea.console.internal.ConsoleActionServlet.init(ConsoleActionServlet.java:185)
at javax.servlet.GenericServlet.init(GenericServlet.java:256)
at weblogic.servlet.AsyncInitServlet.initDelegate(AsyncInitServlet.java:94)
at weblogic.servlet.internal.WebAppServletContext$AsyncInitRequest.run(WebAppServletContext.java:1641)
at weblogic.work.ServerWorkManagerImpl$WorkAdapterImpl.run(ServerWorkManagerImpl.java:518)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:179)
Please let me knwo
Thanks
Binu

3.6.6 doesn't allow css font-sizes below 8px

Previously in Firefox 3.5 to 3.6 the font-size css attribute would allow sizes below 8px. Firefox 3.6.6 doesn't allow css font-sizes below 8px.
== This happened ==
Every time Firefox opened
== I upgraded to 3.6.6

I've found the problem. Go into about:config and change the font.minimum-size.x-western to 0. I'm not sure how mine was set to 10... My hunch is that Firefox 3.6.6 defaults the size to 10 on upgrade.

Firefox did an automatic update to 6.01, and now my middle mouse button is not working in the browser. It doesn't close tabs, it doesn't open new tabs by middle clicking a link, it doesn't allow me to middle click to scroll the page...

Firefox did an automatic update to 6.01, and now my middle mouse button is not working in the browser. It doesn't close tabs, it doesn't open new tabs by middle clicking a link, it doesn't allow me to middle click to scroll the page..

[BUG FIXED, see "EDIT 2" at the end of my post]
I'm on Firefox 3.6.21, and I got this problem today after a Greasemonkey update (To version 0.9.10, apparently).
Disabling Greasemonkey solved the problem, and re-enabling it reproduced the problem (middle-clicking links to open in new tab did not work, merely highlighted the link).
I should also note that while Greasemonkey was enabled and the bug was affecting me, Ctrl+Click to open links in new tabs was also broken.
I hope this helps!
EDIT: It appears this is a known incompatibility/conflict bug between current versions of Greasemonkey and Tab Mix Plus. Read more here:
https://github.com/greasemonkey/greasemonkey/issues/1406
EDIT 2: GREASEMONKEY HAS NOW BEEN UPDATED with a workaround to fix the problem. Go to https://addons.mozilla.org/en-US/firefox/addon/greasemonkey/versions/ to install the update manually. It hasn't been reviewed by Mozilla yet, so it won't be an automatic update for another day or two. All credit to "cannonfodder" below for noticing this; please mark his post as helpful!

Unable to load/parse portlets config SAX2 driver

Hi All
I try no test our software with several AS (Resin, HPAS, etc.) With OC4J we have $subj error. This is my steps:
1 Unzip oc4j_extended.zip
2 Add web-module to default application.
in application.xml:
<web-module id="Axiom" path="/opt/gorod/axiom" />
in http-web-site.xml:
<web-app application="default" name="Axiom" root="/axiom" />
3 Start it
4 Try to connect http://mysite.com:8888/axiom
And watch my log:
2/12/02 11:44 AM: ERROR: unable to load/parse portlets config SAX2 driver class org.apache.xerces.parsers.SAXParser not found: SAX2 driver class org.apache.xerces.parsers.SAXParser not found
2/12/02 11:44 AM: org.jdom.JDOMException: SAX2 driver class org.apache.xerces.parsers.SAXParser not found: SAX2 driver class org.apache.xerces.parsers.SAXParser not found
2/12/02 11:44 AM: at org.jdom.input.SAXBuilder.build(SAXBuilder.java:320)
2/12/02 11:44 AM: at org.jdom.input.SAXBuilder.build(SAXBuilder.java:408)
2/12/02 11:44 AM: at ru.gorod.xpml.PortletsConfig.load(PortletsConfig.java:819)
2/12/02 11:44 AM: at ru.gorod.xpml.PageProcessorServlet.reloadConfig(PageProcessorServlet.java:733)
2/12/02 11:44 AM: at ru.gorod.xpml.PageProcessorServlet.__bgReloadConfig(PageProcessorServlet.java:702)
2/12/02 11:44 AM: at ru.gorod.xpml.BGConfigReloadingThread.run(BGConfigReloadingThread.java:16)
2/12/02 11:44 AM: Root cause: 2/12/02 11:44 AM: java.lang.ClassNotFoundException: org.apache.xerces.parsers.SAXParser
2/12/02 11:44 AM: at org.xml.sax.helpers.XMLReaderFactory.createXMLReader(XMLReaderFactory.java:118)
2/12/02 11:44 AM: at org.jdom.input.SAXBuilder.build(SAXBuilder.java:237)
2/12/02 11:44 AM: at org.jdom.input.SAXBuilder.build(SAXBuilder.java:408)
2/12/02 11:44 AM: at ru.gorod.xpml.PortletsConfig.load(PortletsConfig.java:819)
2/12/02 11:44 AM: at ru.gorod.xpml.PageProcessorServlet.reloadConfig(PageProcessorServlet.java:733)
2/12/02 11:44 AM: at ru.gorod.xpml.PageProcessorServlet.__bgReloadConfig(PageProcessorServlet.java:702)
2/12/02 11:44 AM: at ru.gorod.xpml.BGConfigReloadingThread.run(BGConfigReloadingThread.java:16)
Why? File xerces.jar Placed with application (in /opt/gorod/axiom/WEB-INF/lib) and have all permissions.
Also I try to start java with -Xbootclasspath/a: option but it has equal result.
PS Sorry for my english :-\

mv xerces.jar $J2EE_HOME
cd $J2EE_HOME
java -Xbootclasspath/a:xerces.jar\;jaxp.jar -jar oc4j.jar &
No changes :-(
But with
java -Xbootclasspath/a:xerces.jar:jaxp.jar -jar oc4j.jar &
VM not starts and shows error:
2/13/02 9:33 AM: javax.xml.parsers.FactoryConfigurationError: oracle/xml/jaxp/JXDocumentBuilderFactory
2/13/02 9:33 AM: at javax.xml.parsers.DocumentBuilderFactory.newInstance(DocumentBuilderFactory.java:154)
2/13/02 9:33 AM: at com.evermind.xml.JavaxXMLUtils.getJavaxDocument(JavaxXMLUtils.java:23)
2/13/02 9:33 AM: at com.evermind.xml.XMLUtils.getDocument(XMLUtils.java:157)
2/13/02 9:33 AM: at com.evermind.xml.XMLConfig.init(XMLConfig.java:131)
2/13/02 9:33 AM: at com.evermind.xml.XMLConfig.init(XMLConfig.java:88)
2/13/02 9:33 AM: at com.evermind.server.XMLApplicationServerConfig.init(XMLApplicationServerConfig.java:1298)
2/13/02 9:33 AM: at com.evermind.server.ApplicationServerLauncher.run(ApplicationServerLauncher.java:43)
2/13/02 9:33 AM: at java.lang.Thread.run(Thread.java:484)
2/13/02 9:33 AM: at com.evermind.util.ThreadPoolThread.run(ThreadPoolThread.java:47)

Got a new MacBook pro but for some reason I can't connect to my schools wireless. It doesn't have a problem connecting to any other wifi. My schools network is unsecured all you do is login with your username and password but the window never loads

I jus got a MacBook pro and Im having trouble connecting to my schools network. It is not secured and only requires to login with school id. A Window pops up to sign in but it never loads anyone know why I'm having this problem? Doesn't have a problem connecting to any other wifi

"This is a flaw in OS X Lion. It does not want to connect to open WiFi that has a login page that open in a browser."
Nonsense, no problems logging in at sites that you mention. I use OpenDNS servers. For the OP try:
System Preferences>Network>Advanced>DNS. In the left side column click on the + sign and insert the following:
208.67.222.222
208.67.220.220
Then click OK, then click Apply.

HT5527 How do I choose the $40.00 Icloud plan? When I attemp this, it doesn't allow me to click "next."

How do I choose the $40.00 Icloud plan? When I attemp this, it doesn't allow me to click "next."
The only way it allows me to click "next" is if I choose the $100.00 plan. The email that was sent to me says that I should upgrade or reduce storage because my plan will be reduce to 5GB as of September 30, 2013. Please advise.

Try Settings>iCloud>Storage & Backup>Change Storag Plan. If you are a former MobileMe user you should see Purchase Current Plan listed between the 20GB and 50GB options.

Error while loading journal template in fdm 11.1.1.2

Hi Guys,
I am using Fdm 11.1.1.2. I am getting the following error while loading a journal template
The following error I am getting while loading the template while using the option Select file from inbox
Error- The remote server machine does not exist or is unavailable
The following error I am getting while loading the template using the option upload file
Error- file upload attempt failed.
Detail- access to the path c:\hyperion\products\financial data quality\web server components\website\temporary export files\admin******.temp is denied
An early response is highly appreciated
Thanks & Regards
pss

Hi,
Did you drop it as ADF table? Can you post the code snippet of your jspx page?
-Arun

Migration Assistant doesn't allow me to choose what drive.

Well, I got my new computer. I tried to migrate a drive from my old computer using Migration Assistant. and it doesn't allow me to choose what drive.
In my old computer I have 5 drives. The original HD (was 10GB, was replaced last year by a 40 GB) and on my Hitachi 250 GB drive that I added 2 years ago, there's a partition with 4 drives.
I wanted to migrate one particular drive from there (called Current work).
First I did a mistake. I connected both computer via the firewire in the afternoon when there was enough daylight so I don't have to do it later at night (the computers are under the table.) I thought it's OK since I'm not pushing any button yet ("migrate now", "transfer", and such).
I turned on the new computer and a message appeared: you must restart.
That's strange, I said to myself. it's a brand new computer. Usually It says that when there's a problem, but OK I restart and when it's back on, I see that my external drive (Neptune from OWC which was still hooked up in the old computer) is on the desktop. And it took just a few seconds. I open it and all the files, etc. are there. It did copy the whole external drive !
I'm not an computer expert but I believe the Mac Pro did notice that's there's a firewire hooked up and then, without asking me, migrated the external drive and that's why it asked me to restart. I would have prefer if it tells me "restart so migration can begin".
I don't mind for now that my external drive is on my new computer. I can always erase it if I don't want it. It is still external right ? so it doesn't intrude on the 640 GB of my HD so I just keep it.
But it also copied/migrate Mac HD 40 GB which is full of OS 9 and I almost never use it anymore. I don't want it coz it has applications and they advise not to migrate applications (certainly not applications with issues).
They say migrate folders, settings but re-install applications.
And it migrated also another drive called "Scratch" which has only personal date no system, no software.
Anyway, I erased everything and re-installed using the Install disk that came with the computer.
BTW, what they say in the manual (p. 90: Re-installing the software that came with your Mac Pro) is different than what really happens.
They say insert disk, double- click on Install and then click options in the "Select a destination" pane of the installer. Then click "erase and install" Problem is: there's no "Select a destination" pane. Or any options.
I had to go to Disk utility and erase, then re-install OS X.
Then re-install the applications using "Install applications" (the other disc that came with the computer. )
OK, I did that. Then while everything is empty, new, I used Migration Assistant.
Now here is the reason why I post this.
They say hold T key until you see a firewire icon then select a drive. I can't see when there's an icon coz I have only one monitor, so I just hold and hold the T-key and turn on the old computer. The screen shows "waiting for you other computer to restart" 2 min.... 5 min... 7 min. Nothing happens. I stop holding.
I look at the desktop and I see that the icon of the old 40 GIG Mac HD is there. (and I believe with a firewire logo, but not sure about that.)
I have the impression that if I kept the T-key longer it would have migrate the other drives as well.
They say keep the T-key down until you see the firewire (then let go I suppose. As I said I don't see what's going on on the desktop of my old computer so I kept the T-key for a few minutes. I also tried another time to let go after 1-2 min. No difference.
I shut down the new comp. and the old computer screen appears automatically (both are connected to the monitor; the old with analog port, the new with digital port) and sure enough the firewire icon is moving on the screen.
I go back to the new computer and put the old 40 GIG Mac HD in the trash. Actually, when it touched the trash, I just saw an eject icon and the drive disappear. Did not go in the trash which is empty. So I guess I ejected, not sure what's the difference but I looked for it to see if it's anywhere in the computer. Could not find it. Not in the HD, not in the desktop. Good, I don't want it there. Is it hidden somewhere ?
So I tried again but wondering perhaps the old computer should RESTART not turn on (it was off) so now I wait until it's on, then push restart. I hear the gong when it shuts off but that's it, no other gong when it comes back. I keep the T-key. But nothing happened. Just see the message "waiting for your other computer to restart"
PS: BTW Target mode (which seems to me similar to Migrating with "Migration Assistant") will not work for me because it must be SATA, mine is ATA.
I didn't try but read that it has to be SATA.
Is it the same ? In migrating they say hold down the T-key (T for target)
And how come that my 40GB HD which is ATA did migrate (not that I wanted too but still).
Also, this drive ("Current Work") that I want to migrate to the new computer is in my external drive. Can't I just drag it ? If it has only personal data, files and folders I know I can, but It has system (OS X) and applications. It's the one I use and boot on, in my old G4 but I want to transfer Files and folders and settings, so the new computer will know what are my Safari preferences, Automatic fill-in, and perhaps it will move my iTunes music Library too ?
Basically everything except applications. Although I would like my Nikon scanner to be in the new computer as well as the LaCie DVD recorder but I guess I can do that later, separately ?
What are the settings or info I need ? Because if it's just Safari preferences, automatic fill-in and other such small thing, it might be better to just do it again in the new comp and forget about the hassle of migrating.

Try getting into Windows and then plugging in the Superdrive. The drive will only be attached to one OS or the other, not both.

My itouch will not allow me to connect to my wifi. It doesn't even let me get onto my wifi settings. The button is unhighlighted as well so it won't even let me fix it or choose a wifi network!!!!!!

My itouch will not allow me to connect to my wifi. It doesn't even let me get onto my wifi settings. The button is unhighlighted as well therefore it won't even let me fix it or choose a wifi network-any network!!!!!! So i can't access NOTHING!!!! Our other new itouch's work fine (im using one right now lol lol) so it isnt my wifi/router.... My itouch is old lol, I've had it for 4 or 5 years and it's cracked up etc...lol lol. But it still works great, however, it was out of commission for the past 5 months cuz my computer was not working to sync it and it wanted me to "connect to itunes" and i couldnt at the time...(plug it in to sync).... And now my computer and iTunes are working and the itunes software is updated as well. So i have synced my itouch and said itouch is working and restored however it will not allow me to access my wifi settings. The button is unaccessable and unhighlighted as i have stated above already and am in the process of syncing and restoring said itouch again!!! Which should take another full day or two lol lol omg!!!
Please help :)
I love my old itouch!!! :( and Miss it dearly lol :(
Ty in advance for anybody's help with this matter.

My itouch will not allow me to connect to my wifi. It doesn't even let me get onto my wifi settings. The button is unhighlighted as well therefore it won't even let me fix it or choose a wifi network-any network!!!!!! So i can't access NOTHING!!!! Our other new itouch's work fine (im using one right now lol lol) so it isnt my wifi/router.... My itouch is old lol, I've had it for 4 or 5 years and it's cracked up etc...lol lol. But it still works great, however, it was out of commission for the past 5 months cuz my computer was not working to sync it and it wanted me to "connect to itunes" and i couldnt at the time...(plug it in to sync).... And now my computer and iTunes are working and the itunes software is updated as well. So i have synced my itouch and said itouch is working and restored however it will not allow me to access my wifi settings. The button is unaccessable and unhighlighted as i have stated above already and am in the process of syncing and restoring said itouch again!!! Which should take another full day or two lol lol omg!!!
Please help :)
I love my old itouch!!! :( and Miss it dearly lol :(
Ty in advance for anybody's help with this matter.

How do I edit a document I saved? It doesn't allow me to edit, just fill in on top of my entries

How do I edit a document I saved? It doesn't allow me to edit, just fill in on top of my entries.@

Adobe Reader (the focus of this forum) cannot edit PDF files (Adobe Reader is only a PDF viewer).
Be well...

Pages 5 Document Endnotes doesn't allow text continuation onto next page?

For large blocks of endnote citations, Pages 5 doesn't all the text to flow down to the end of the page before going to the next. Rather it treats the endnote text area as its own section, thereby moving the entire text box to the next page. This is problematic from a formatting standpoint because it wastes page space, does anyone have a workaround or suggestions?
Example:
Citation 5 is long but I would like to keep it on the same page as Citation 4 and just let the text continue onto the next page. However Pages 5 doesn't allow me to adjust the endnote text box and just jumps to the next page. Rarely do you see endnotes arranged in this manner in high-level research reports and we can't have this.

I exported a PDF from Pages v5.2.2. This uses Apple's Quartz PDFContext, not Quark.
In Windows 7, I opened this PDF with Adobe Acrobat Reader v11.0.09. I then copied/pasted a paragraph of this PDF content into LibreOffice Writer (v4.3.2.2). Since there was Baskerville in Windows 7, this comment pasted correctly including font-size. I did not have to make any adjustments to LO to accept this text.
On Ubuntu Linux 14.04, with the latest updates, I opened the same PDF in Evince, the default PDF viewer. Adobe does not offer an Acrobat Reader download for Linux. Again, I copied and pasted a paragraph of content from the PDF viewer into LibreOffice Writer. As there was no Baskerville installed, Writer defaulted to the Liberation font, at the correct point size.
In either of these platform scenarios, there were no anomalies with sentence/paragraph newlines .vs. carriage return issues from the PDF document during copy/paste operations. These were default control-v pastes that did not use the Paste Special menu item in LibreOffice.

ASA5505 Loading a template config doesn't allow me to connect via ASDM & SSH

Similar Messages

Maybe you are looking for