ASA5510 - access asdm through outside

Is it possible to access adsm through outside interface?
I issued bellow command
http server enable
http 0.0.0.0 0.0.0.0 inside
http 0.0.0.0 0.0.0.0 outside
and in/outside interfaces is allowed ip any any
I can access asdm through inside but outside not
I don't Know what is the ploblem.. T.T
Sent from Cisco Technical Support iPhone App

Hello,
Ofcourse it is,
Are you using anyconnect ?
Is the traffic reaching the ASA?
Does the computer you use uses a Java version lower than 7?
For more information about Core and Security Networking follow my website at http://laguiadelnetworking.com
Any question contact me at [email protected]
Cheers,
Julio Carvajal Segura

Similar Messages

Accessing ASDM through MS Remote Desktop Services session based system

I am setting up a MS Remote Desktop Services system for a client. This is being configured as a jump server so everyone at the client will go through this system (aka jump server) to access systems via ssh, https, etc that are in a restricted part of the network. I am running into a problem getting ASDM to work. I can bring up the initial web page directly on the server via Internet Explorer, so that tells me I can get to the ASA. I have installed Java 1.7.10 as this is the recommended version on looking at the Java site for Windows 2012. When I try to install the dm_launcher, it says that Java isnt installed..
Has anyone been able to get this to work ?
Ron

I've used ASDM fine from an RDS platform. I used Java 7 update 45. How are you trying to install the launcher?
Sent from Cisco Technical Support iPad App

Managing ASA5510 using ASDM via internal interface

Hello
I am currently managing an ASA5510 using ASDM through the management port but I would like to manage the ASA through the internal port.
My concern is that I thought I remembered reading someplace that if you setup an internal port for management that it can't be used for anything else. Is this correct?
I only configured one internal port and it is the path to my LAN. I would hate to configure the port for management only to find that I disconnected my firewall from my internal network in the process. Can I use my one and only configured internal port for both ASA management and route from my LAN thru the ASA firewall?
I currently have the management port set to 192.168.1.1 and my internal interface is 10.1.1.1. If I open ASDM and connect thru the management port and select Configuration/Device Management/Management Access/ASDM/HTTPS/Telnet/SSH
select "ADD"
select access type "ASDM/HTTPS"
select interface "internal"
IP Address "10.1.1.0"
Mask "255.255.255.0"
Will that give me access to ASA management thru my internal network but cripple my network access to the ASA?
Sorry if this is confusing... I don't know how else to phrase it.
Thanks
Ed

Hi
it sounds like a better plan than opening up for each and every unit on the inside :).
But if you have a old laptop or something like that I would state that setting that up with a syslog server and use that to manage the firewall would be a even better option.
that way you would get logs and a management station.
there are several syslog servers that are free and I like to use grep that is also free to filter information.
http 10.1.1.52 255.255.255.255 inside
will make the 10.1.1.52 the only server to work with asdm
but you will have to remove the old http 10.1.1.0 255.255.255.0 inside statement.
If you find the answers helpful please rate.
good luck
HTH

Why i cant access asa 8.4 thruogh asdm from outside interface ???

hi all ,
plz help e why i cant access asa asdm from outside interface
my puclic ip on outisde is :
x.x.55.34
i changed portf of asdm to 65000 because i have portforward ,
i tried to connect to my ip thriuogh asdm bu :
x.x.55.34
x.x.55.34:65000
but no luck ,
it succed if i try to connect locally
here is my sh run command :
====================================================
ASA5505#
ASA5505# sh run
: Saved
ASA Version 8.4(2)
hostname ASA5505
enable password qsddsEGCCSH encrypted
passwd 2KFsdsdbNIdI.2KYOU encrypted
names
interface Ethernet0/0
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
switchport access vlan 2
interface Vlan1
nameif ins
security-level 100
ip address 10.66.12.1 255.255.255.0
interface Vlan2
nameif outside
security-level 50
ip address x.x.55.34 255.255.255.248
boot system disk0:/asa842-k8.bin
ftp mode passive
same-security-traffic permit inter-interface
same-security-traffic permit intra-interface
object network obj_any
subnet 0.0.0.0 0.0.0.0
object network obj-0.0.0.0
host 0.0.0.0
object network localsubnet
subnet 10.66.12.0 255.255.255.0
description localsubnet
object network HTTP-Host
host 10.66.12.249
description web server
object network HTTPS-HOST
host 10.66.12.249
description Https
object network RDP-Host
host 10.66.12.122
description RDP host
object network citrix-host
host 10.66.12.249
description citrix
object service rdp
service tcp destination eq 3389
object service https
service tcp destination eq https
object service citrix
service tcp destination eq 2598
object service http
service tcp destination eq www
object network RDP1
host 10.66.12.249
object network HTTPS-Host
host 10.66.12.249
object network CITRIX-Host
host 10.66.12.249
object-group network RDP-REDIRECT
object-group network HTTP-REDIRECT
object-group network HTTPS-REDIRECT
object-group network CITRIX-ICA-HDX-REDIRECTION
object-group network CITRIX-ICA-SESSION-RELIABILITY-REDIRECTION
object-group service CITRIX-ICA-HDX
object-group service CITRIX-SR
object-group service RDP
object-group network MY-insideNET
network-object 10.66.12.0 255.255.255.0
access-list outside_in extended permit tcp any host 10.66.12.249 eq www
access-list outside_in extended permit tcp any host 10.66.12.249 eq https
access-list outside_in extended permit tcp any host 10.66.12.249 eq 2598
access-list outside_in extended permit tcp any host 10.66.12.122 eq 3389
access-list outside_in extended permit tcp any host 10.66.12.249 eq citrix-ica
access-list outside_in extended permit tcp any host x.x.55.34 eq 65000
access-list outside_in extended permit tcp any host x.x.55.34 eq https
access-list outside_in extended permit ip any any
pager lines 24
mtu ins 1500
mtu outside 1500
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-645.bin
no asdm history enable
arp timeout 14400
object network localsubnet
nat (ins,outside) dynamic interface
object network HTTP-Host
nat (ins,outside) static interface service tcp www www
object network RDP-Host
nat (ins,outside) static interface service tcp 3389 3389
object network HTTPS-Host
nat (ins,outside) static interface service tcp https https
object network CITRIX-Host
nat (ins,outside) static interface service tcp citrix-ica citrix-ica
access-group outside_in in interface outside
route outside 0.0.0.0 0.0.0.0 62.109.55.33 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
user-identity default-domain LOCAL
aaa authentication http console LOCAL
aaa authentication ssh console LOCAL
http server enable 65000
http 10.66.12.0 255.255.255.0 ins
http 0.0.0.0 0.0.0.0 outside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ca trustpoint _SmartCallHome_ServerCA
crl configure
crypto ca certificate chain _SmartCallHome_ServerCA
certificate ca 6ecc7aa5a7032009b8cebcf4e952d491
    308205ec 308204d4 a0030201 0202106e cc7aa5a7 032009b8 cebcf4e9 52d49130
    0d06092a 864886f7 0d010105 05003081 ca310b30 09060355 04061302 55533117
    30150603 55040a13 0e566572 69536967 6e2c2049 6e632e31 1f301d06 0355040b
    13165665 72695369 676e2054 72757374 204e6574 776f726b 313a3038 06035504
    0b133128 63292032 30303620 56657269 5369676e 2c20496e 632e202d 20466f72
    20617574 686f7269 7a656420 75736520 6f6e6c79 31453043 06035504 03133c56
    65726953 69676e20 436c6173 73203320 5075626c 69632050 72696d61 72792043
    65727469 66696361 74696f6e 20417574 686f7269 7479202d 20473530 1e170d31
    30303230 38303030 3030305a 170d3230 30323037 32333539 35395a30 81b5310b
    30090603 55040613 02555331 17301506 0355040a 130e5665 72695369 676e2c20
    496e632e 311f301d 06035504 0b131656 65726953 69676e20 54727573 74204e65
    74776f72 6b313b30 39060355 040b1332 5465726d 73206f66 20757365 20617420
    68747470 733a2f2f 7777772e 76657269 7369676e 2e636f6d 2f727061 20286329
    3130312f 302d0603 55040313 26566572 69536967 6e20436c 61737320 33205365
    63757265 20536572 76657220 4341202d 20473330 82012230 0d06092a 864886f7
    0d010101 05000382 010f0030 82010a02 82010100 b187841f c20c45f5 bcab2597
    a7ada23e 9cbaf6c1 39b88bca c2ac56c6 e5bb658e 444f4dce 6fed094a d4af4e10
    9c688b2e 957b899b 13cae234 34c1f35b f3497b62 83488174 d188786c 0253f9bc
    7f432657 5833833b 330a17b0 d04e9124 ad867d64 12dc744a 34a11d0a ea961d0b
    15fca34b 3bce6388 d0f82d0c 948610ca b69a3dca eb379c00 48358629 5078e845
    63cd1941 4ff595ec 7b98d4c4 71b350be 28b38fa0 b9539cf5 ca2c23a9 fd1406e8
    18b49ae8 3c6e81fd e4cd3536 b351d369 ec12ba56 6e6f9b57 c58b14e7 0ec79ced
    4a546ac9 4dc5bf11 b1ae1c67 81cb4455 33997f24 9b3f5345 7f861af3 3cfa6d7f
    81f5b84a d3f58537 1cb5a6d0 09e4187b 384efa0f 02030100 01a38201 df308201
    db303406 082b0601 05050701 01042830 26302406 082b0601 05050730 01861868
    7474703a 2f2f6f63 73702e76 65726973 69676e2e 636f6d30 12060355 1d130101
    ff040830 060101ff 02010030 70060355 1d200469 30673065 060b6086 480186f8
    45010717 03305630 2806082b 06010505 07020116 1c687474 70733a2f 2f777777
    2e766572 69736967 6e2e636f 6d2f6370 73302a06 082b0601 05050702 02301e1a
    1c687474 70733a2f 2f777777 2e766572 69736967 6e2e636f 6d2f7270 61303406
    03551d1f 042d302b 3029a027 a0258623 68747470 3a2f2f63 726c2e76 65726973
    69676e2e 636f6d2f 70636133 2d67352e 63726c30 0e060355 1d0f0101 ff040403
    02010630 6d06082b 06010505 07010c04 61305fa1 5da05b30 59305730 55160969
    6d616765 2f676966 3021301f 30070605 2b0e0302 1a04148f e5d31a86 ac8d8e6b
    c3cf806a d448182c 7b192e30 25162368 7474703a 2f2f6c6f 676f2e76 65726973
    69676e2e 636f6d2f 76736c6f 676f2e67 69663028 0603551d 11042130 1fa41d30
    1b311930 17060355 04031310 56657269 5369676e 4d504b49 2d322d36 301d0603
    551d0e04 1604140d 445c1653 44c1827e 1d20ab25 f40163d8 be79a530 1f060355
    1d230418 30168014 7fd365a7 c2ddecbb f03009f3 4339fa02 af333133 300d0609
    2a864886 f70d0101 05050003 82010100 0c8324ef ddc30cd9 589cfe36 b6eb8a80
    4bd1a3f7 9df3cc53 ef829ea3 a1e697c1 589d756c e01d1b4c fad1c12d 05c0ea6e
    b2227055 d9203340 3307c265 83fa8f43 379bea0e 9a6c70ee f69c803b d937f47a
    6decd018 7d494aca 99c71928 a2bed877 24f78526 866d8705 404167d1 273aeddc
    481d22cd 0b0b8bbc f4b17bfd b499a8e9 762ae11a 2d876e74 d388dd1e 22c6df16
    b62b8214 0a945cf2 50ecafce ff62370d ad65d306 4153ed02 14c8b558 28a1ace0
    5becb37f 954afb03 c8ad26db e6667812 4ad99f42 fbe198e6 42839b8f 8f6724e8
    6119b5dd cdb50b26 058ec36e c4c875b8 46cfe218 065ea9ae a8819a47 16de0c28
    6c2527b9 deb78458 c61f381e a4c4cb66
quit
telnet 0.0.0.0 0.0.0.0 outside
telnet timeout 5
ssh timeout 5
console timeout 0
management-access outside
dhcpd address 10.66.12.160-10.66.12.180 ins
dhcpd dns 212.112.166.22 212.112.166.18 interface ins
dhcpd enable ins
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
username test password P4ttSdddd3SV8TYp encrypted privilege 15
username ADMIN password 5dddd3ThngqY encrypted privilege 15
username drvirus password p03BtCddddryePSDf encrypted privilege 15
username cisco password edssdsdOAQcNEL encrypted privilege 15
prompt hostname context
call-home reporting anonymous
call-home
profile CiscoTAC-1
no active
destination address http https://tools.cisco.com/its/service/oddce/services/DD
CEService
destination address email [email protected]
destination transport-method http
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory periodic monthly
subscribe-to-alert-group configuration periodic monthly
subscribe-to-alert-group telemetry periodic daily
Cryptochecksum:d41d8cd98f00b204e9800998ecf8427e
: end

For access over VPN you need:
management-access inside
and don't forget:
ssh inside
http inside
I'm guessing you forgot to grant ASDM (http/https) access to the IP addresses used by the VPN? Can you SSH? If not, that is your problem to solve first.

Unable to access ASDM on 5505

I'm new to the forum/discussions so forgive me if this is already posted. I read through several other posts and have followed the troubleshooting procedures in them, but I still can't access ASDM. I deleted the old ASDM versions and upgraded to ASDM 7.1(1)52 which shows compatible with ASA 8.2(1). I'm on an inside NAT address connected to Eth 0/5, 192.168.1.5/24. I can ping and SSH to the FW but no ASDM. FW is passing traffic and everything else works just fine. Please advise. Thank you.
JEREMY-ASA# show ver
Cisco Adaptive Security Appliance Software Version 8.2(1)
Device Manager Version 7.1(1)52
JEREMY-ASA# show run asdm
asdm image disk0:/asdm-711-52.bin
no asdm history enable
JEREMY-ASA# show run http
http server enable
http 192.168.1.0 255.255.255.0 inside
JEREMY-ASA# show run
: Saved
ASA Version 8.2(1)
hostname JEREMY-ASA
enable password OMIT encrypted
passwd OMIT encrypted
names
interface Vlan1
nameif inside
security-level 100
ip address 192.168.1.1 255.255.255.0
interface Vlan2
nameif outside
security-level 0
ip address 134.121.11.153 255.255.248.0
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
banner exec
OMIT BANNER STATEMENTS
ftp mode passive
clock timezone PST -8
clock summer-time PDT recurring
same-security-traffic permit intra-interface
access-list outside_access_in extended deny ip any any
pager lines 24
logging enable
logging timestamp
logging asdm-buffer-size 250
logging trap informational
logging asdm informational
logging device-id ipaddress outside
logging host outside OMIT
mtu outside 1500
mtu inside 1500
ip verify reverse-path interface outside
ip audit attack action drop
icmp unreachable rate-limit 1 burst-size 1
icmp permit any inside
asdm image disk0:/asdm-711-52.bin
no asdm history enable
arp timeout 14400
global (outside) 10 interface
nat (inside) 10 192.168.1.0 255.255.255.0
access-group outside_access_in in interface outside
route outside 0.0.0.0 0.0.0.0 134.121.15.254 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-record DfltAccessPolicy
aaa authentication enable console LOCAL
aaa authentication http console LOCAL
aaa authentication serial console LOCAL
aaa authentication ssh console LOCAL
aaa authorization command LOCAL
aaa authorization exec LOCAL
http server enable
http 192.168.1.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
telnet timeout 5
ssh 192.168.0.0 255.255.255.0 inside
ssh 192.168.1.0 255.255.255.0 inside
ssh timeout 10
ssh version 2
console timeout 0
management-access inside
threat-detection basic-threat
threat-detection statistics
threat-detection statistics tcp-intercept rate-interval 30 burst-rate 400 average-rate 200
ntp server OMIT
ssl encryption des-sha1
webvpn
username OMIT password OMIT encrypted privilege 15
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect icmp
service-policy global_policy global
prompt hostname context
crashinfo console disable
Cryptochecksum:3c8669ae6960ca4cc206db58ffbf3c21
: end

It's most likely the string:
ssl encryption des-sha1
That weak cipher is not compatible with most modern browsers and current releases of Java which ASDM depend on. Try adding a strong cipher, e.g.:
ssl encryption des-sha1 aes256-sha1
Make sure you have 3DES-AES activation first ("show version" or "show activation-key" will confirm that feature license is active).

Require Client Certificate to Access ASDM on the Following Interfaces

Hello
I have an ASA 5585 with an outside interface with two subnets. The mgmt interface is the secondary interface. I have a certificate linked to the outside interface's primary ip address. When I ASDM to the ASA I get a dialog box telling me the cert is self signed. Do I need to get a second cert or can I do something else on the ASA that will allow the existing cert on the ASA to work with ASDM on the ASA?
I.e. Configuration/Management Access/ASDM/HTTPS/Telent/SSH/Require Client Certificate to Access ASDM on the Following Interfaces
Thanks!
Matt

You can bind the identity certificate to multiple interfaces. Whether it is self-signed or from a third party trusted root CA it will work either way.
You may get some warnings from ASA if the FQDN or IP address you are connecting to does not match the certificate but clicking through that will allow you to manage the appliance.
Client certificates are a totally separate issue. That's typically only used when you have a PKI and are using the certificates issued to a client as a form of authentication and/or authorization.

Accessing Photos Through Other Programs

Hopefully this is not a stupid question and that it actually makes sense. I recently updated my iphoto library. Yesterday a photo was sent to me through messenger on my iphone. I saved that photo to my phone and then imported it into my computer. Since it's a picture of my relatives and not of me, I don't feel comfortable uploading it to social media and wanted to just share it directly with a friend through skype. However, I find that when I try to locate a file within my mac so that I can upload it to sites and programs of my choosing, I can no longer access my photo library. Oh, I can find the photo library, but it's not accessible from other programs. I don't want to import the photo through iphoto into mail, messages, airdrop, twitter, facebook, linkedin, vimeo, flickr, 'add to photos', or add to aperture or any of the other options. It's my photo so I should be able to do whatever I want with it.
So, my question is: how in the world do I access the file itself, and send it to somewhere not on the sharing list? And specifically, can I access that file and do anything with it from outside iphoto at all?

The drag and drop portion of that does work.
Although I will admit that the accessing them through the 'media' and 'photos' thing when you try to open a file through other programs 100% is no longer an option. The only thing you'll find in there is photo booth. Also the 'Select one of the affected photos in the iPhoto Window and go File -> Reveal in Finder -> Original. A Finder window will pop open with the file already selected.' is no longer an option. I don't know about the other options because I didn't try. But so far in order to just be able to access the file however I want to, dragging and dropping it to the desktop is the only thing I've found that works.

Can only access emails through OWA after migration from exchange 2007 to 2013

can only access emails through OWA after migration from exchange 2007 to 2013, in other words unable to access mails through outlook or from other Applications services.
needed RCA ... plz help..

Hi,
From your description, you can send and receive messages only when you use OWA after migration from Exchange 2007 to Exchange 2013. If I have misunderstood your concern, please let me know.
In your case, I recommend you create a new test mailbox in your Exchange 2013 and check if you can send and receive messages on Outlook. If yes, it is recommended to create a new profile to solve this issue.
Hope this can be helpful to you.
Best regards,
Amy Wang
TechNet Community Support

I have had a reinstall nightmare getting my loops back they are in the apple library, I can access them through the media browser but I only have a few available through the loop browser, how do I get them all back there again? please help

I have had a reinstall nightmare getting my loops back they are in the apple library, I can access them through the media browser but I only have a few available through the loop browser, how do I get them all back there again? please help

"Where do I find my hundreds of dollars of downloads I have done since 2005?"
They will only be where you put them If you are doing the very basics, then they will be on your computer and they will be in your backup copy of your computer.
The itunes store is not global at all, never has been. You cannot redownload your content from another country. You can only use the countrys itunes store for the country that you are physically located.

Since updating my iPhone 4 to ios6 I can no longer access itunes through the itunes app. I just get a blank white screen. Is there a fix for this yet?

Since upgrading my iPhone 4 to the new ios6 software I can no longer access itunes through the itunes app. I there a fix for this yet?

Scalesy05 wrote:
I there a fix for this yet?
Why would there be a fix? YOU are having the problem. I'm not, no one I know is having the problem. No fix is needed.
Basic troubleshooting steps clearly outlined in the User Guide are restart, reset, restore from backup, restore as new. Have you been through any, if not all of these troubleshooting steps yet?

Unable to access Database through DBAdapater

Hi All,
I am using Dbadapter in my SOA Composite application and trying to access that through invoke activity.
I am getting errors in both Jdeveloper and in SOA infra environment (http://localhost:8001/soa-infra).I am unable to proceed with my work.
1) Error in Jdeveloper:
When I click on Dbadapter and it is giving below error stacktrace:
java.lang.NullPointerException
     at oracle.tip.adapter.db.ox.AttributeHolder.toString(AttributeHolder.java:82)
     at java.lang.String.valueOf(String.java:2826)
     at
org.eclipse.persistence.exceptions.DescriptorException.illegalArgumentWhileSettingValueThruMethodAcc
essor(DescriptorException.java:691)
     at
org.eclipse.persistence.internal.descriptors.MethodAttributeAccessor.setAttributeValueInObject(Metho
dAttributeAccessor.java:248)
     at
org.eclipse.persistence.internal.descriptors.MethodAttributeAccessor.setAttributeValueInObject(Metho
dAttributeAccessor.java:201)
     at
org.eclipse.persistence.oxm.mappings.XMLDirectMapping.setAttributeValueInObject(XMLDirectMapping.jav
a:386)
     at
org.eclipse.persistence.mappings.DatabaseMapping.readFromRowIntoObject(DatabaseMapping.java:1284)
     at
org.eclipse.persistence.internal.descriptors.ObjectBuilder.buildAttributesIntoObject(ObjectBuilder.j
ava:342)
     at
org.eclipse.persistence.internal.oxm.XMLObjectBuilder.buildAttributesIntoObject(XMLObjectBuilder.jav
a:376)
     at
org.eclipse.persistence.internal.oxm.XMLObjectBuilder.buildObject(XMLObjectBuilder.java:286)
     at
org.eclipse.persistence.oxm.mappings.XMLCompositeObjectMapping.buildCompositeObject(XMLCompositeObje
ctMapping.java:435)
     at
org.eclipse.persistence.oxm.mappings.XMLCompositeObjectMapping.valueFromRow(XMLCompositeObjectMappin
g.java:540)
     at
org.eclipse.persistence.oxm.mappings.XMLCompositeObjectMapping.readFromRowIntoObject(XMLCompositeObj
ectMapping.java:464)
     at
org.eclipse.persistence.internal.descriptors.ObjectBuilder.buildAttributesIntoObject(ObjectBuilder.j
ava:342)
     at
org.eclipse.persistence.internal.oxm.XMLObjectBuilder.buildAttributesIntoObject(XMLObjectBuilder.jav
a:376)
     at
org.eclipse.persistence.internal.oxm.XMLObjectBuilder.buildObject(XMLObjectBuilder.java:286)
     at
org.eclipse.persistence.internal.oxm.record.DOMUnmarshaller.xmlToObject(DOMUnmarshaller.java:427)
     at
org.eclipse.persistence.internal.oxm.record.DOMUnmarshaller.xmlToObject(DOMUnmarshaller.java:354)
     at
org.eclipse.persistence.internal.oxm.record.DOMUnmarshaller.unmarshal(DOMUnmarshaller.java:208)
     at org.eclipse.persistence.oxm.XMLUnmarshaller.unmarshal(XMLUnmarshaller.java:476)
     at
org.eclipse.persistence.sessions.factories.XMLProjectReader.readObjectPersistenceRuntimeFormat(XMLPr
ojectReader.java:287)
     at
org.eclipse.persistence.sessions.factories.XMLProjectReader.read(XMLProjectReader.java:180)
     at
org.eclipse.persistence.sessions.factories.XMLProjectReader.read(XMLProjectReader.java:236)
     at
oracle.tip.tools.ide.adapters.designtime.adapter.xr.XRAdapterUtil.readTopLinkProjectFiles(XRAdapterU
til.java:492)
     at
oracle.tip.tools.ide.adapters.designtime.adapter.xr.XRAdapterSelectTablesPage.<init>(XRAdapterSelect
TablesPage.java:122)
     at
oracle.tip.tools.ide.adapters.designtime.adapter.xr.XRAdapterOperationPage$ReAddPagesRunnable.run(XR
AdapterOperationPage.java:844)
     at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:209)
     at java.awt.EventQueue.dispatchEvent(EventQueue.java:597)
     at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
     at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
     at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:178)
     at java.awt.Dialog$1.run(Dialog.java:1046)
     at java.awt.Dialog$3.run(Dialog.java:1098)
     at java.security.AccessController.doPrivileged(Native Method)
     at java.awt.Dialog.show(Dialog.java:1096)
     at java.awt.Component.show(Component.java:1563)
     at java.awt.Component.setVisible(Component.java:1515)
     at java.awt.Window.setVisible(Window.java:842)
     at java.awt.Dialog.setVisible(Dialog.java:986)
     at oracle.bali.ewt.wizard.WizardDialog.runDialog(WizardDialog.java:382)
     at oracle.bali.ewt.wizard.WizardDialog.runDialog(WizardDialog.java:298)
     at
oracle.tip.tools.ide.adapters.designtime.adapter.techAdapterWizard.display(techAdapterWizard.java:36
2) Error with testing in soa-infra environment :
<env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/"><env:Header/><env:Body><env:Fault><faultcode>env:Server</faultcode><faultstring>Exception occured when binding was invoked.
Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'insert' failed due to: Could not create/access the TopLink Session.
This session is used to connect to the datastore.
Caused by java.lang.NullPointerException.
You may need to configure the connection settings in the deployment descriptor (i.e. DbAdapter.rar#META-INF/weblogic-ra.xml) and restart the server. This exception is considered not retriable, likely due to a modelling mistake.
The invoked JCA adapter raised a resource exception.
Please examine the above error message carefully to determine a resolution.
</faultstring><faultactor/><detail><exception>null</exception></detail></env:Fault></env:Body></env:Envelope>
I am giving proper values for JNDI name in weblogic-ra.xml.
What I observed is We have a connectionfacatory configuration in ra.xml which is "oracle.tip.adapter.db.ManagaedConnectionfactory".
Is there any link with this connectionfactory to the errors that I am getting.
Please guide me on this.
Thanks in advance

Have you updated the "Outbound Connection Pools-" under your soa server ?
http://docs.oracle.com/cd/E23943_01/web.1111/e13732/connect.htm
*7) Give points - it is good etiquette to reward an answerer points (5 - helpful; 10 - correct) for their post if they answer your question.*
Thanks,
Vijay

Unable to access Workspace through Apache web server

Hi,
I have configured Hyperion 9.3.1. products in windows.
I am getting the following error message when trying to access Workspace through Apache web server(port 19000). But, able to access through Weblogic Application server(port 45000).
please assist me in resolving this issue.
Internal Server Error
The server encountered an internal error or misconfiguration and was unable to complete your request.
Please contact the server administrator, [email protected] and inform them of the time the error occurred, and anything you might have done that may have caused the error.
More information about this error may be available in the server error log.
Apache/2.0.63 (Win32) mod_jk/1.2.8 Server at nasbydapp04 Port 19000
Thanks,
Siva

I re-configured the BIPlus components and even now, i am unable to access workspace through Apache web server.
But now, i am getting a different error
Error:
HTTP 404 - File not found
Internet Explorer
Can anyone help me in resolving this issue.
I have updated httpd.conf and HYSL-Weblogic.conf file in Apache server.

Error while accessing data from MS Access DB through Window AD architec

Dear Members,
Iam having a BO 3.0 installation on a standalone PC with the basic tomcat and mysql setup... As a test environment, Now while designing universes i can easily connect to Oracle EBS structure also SQL server DB ... the problem is when iam linking to a MS Access DB through a network drive (its all ok in the designer) but while in Webi while runnning the query, it throws an error of (WIS 10901 .... database error DSN not specified)
I have configured ODBC properly also given appropriate rights for the users and strangely the same universe is running well with my thick client desktop and webi rich client
(so iam sure its not a odbc issue)
Looking forward for any comments on this problem

possibly the account running the webi report server doesn't have access to the drive. Is it local system? Try using the same account you are logged into the webi rich client as, but you will most likely need to grant that account local admin on the server so it can run the service.
Regards,
Tim

Can not access CRM from outside the office network - Access denied You do not have sufficient access rights or privileges to perform this action.

Hi,
I can not access CRM from outside the office network - Access denied You do not have sufficient access rights or privileges to perform this action. I can access CRM with same user id and password from our office inside the network. I can get
the page to give login details once I have login details I got below error. Please help me to solve this issue. It was working before.
Access denied You do not have sufficient access rights or privileges to perform this action.
Regards,
Noushad
[email protected]

On Premise system Configured with AD FS server for claims-based authentication you need to update your host file with server url to access it from outside office network.
Refer
this on how to update host file.
Regards, Saad

Is there a way to access 11i from outside other than Self service?

Is there a way to access 11i from outside other than Self service?
I could connect any application from inside the firewall (basically router) and can not access screens from outside. Eventhough port forwarding 80 allows us upto initial screen, it does not go further.
Any workaround/suggestions
Jiltin

Hi Jiltin,
If you can migrate your forms server into Forms Listener Servlet.This will allow you to use forms outside firewall provided atleast one port(assuming yours 80) is open.
Ref to the M.Link Note 201340.1 for how to setup forms listener servlet.
Magesh

ASA5510 - access asdm through outside

Similar Messages

Maybe you are looking for