ASA5510 - Maximum connect time

Quick question. I have configured the "Maximum Connect Time" as unlimited in my group policy but when a connection is established it shows a "Conn Time Out: 120 minutes".
The connection does get dropped with this timer. Any idea how to actually make it unlimited and why it get sets to 120?
I having a problem with SSL phone clients dropping throughout the day and think this may be the cause.
Thanks

I ended up rebooting the ASA this morning and it fixed the issue. Right away the timeout changed to what I had configured it to be and I was also able to make changes.
Here's the response from TAC. Thanks for helping with this. Much appreciated.
"I am glad that the issue was resolved on a reboot. Might be that svc sessions were stuck in the memory for some reason and the same sessions would be invoked every time you connected rather than tearing it down and creating a new svc session.
Once rebooted I believe the sessions stuck in memory were cleared and new sessions came up as a result the issue vanished. I shall surely update you as I have an update from the devs on this."

Similar Messages

ORA-02399: exceeded maximum connect time, you are being logged off

What could have been the cause of "ORA-02399: exceeded maximum connect time, you are being logged off"? I am always getting that issue even if I am continously doing some query.

There's a resource limit active (RESOURCE_LIMIT=TRUE in pfile/spfile) and a user_profile (which limits the connection time) dedicated to the user.

Internet Connect error - Max connect time

I am trying to help a friend with his Powerbook G4 at 10.4.4 configure dial-up networking with his internal modem.
When I click the "Connect" button in internet config it briefly shows a status of "Contacting PPP Server" then immediately presents a dialog box with the message "The connection was terminated because the maximum connection time has elapsed."
Although I have verbose logging checked in the ppp configuration in the ppp options of the network prefpane for the internal modem, Internet Config does not write anything to the log. The modem selected is "Apple Internal Modem (v90)". I have tried other modem selections with the same result.
I have tried dialing the modem with zTerm and that works. So, the problem does not appear to be originating with the modem.
What is causing the time out condition and how do I correct it?
Thanks

There was probably "maxconnect x" (with a numerical value for x) in either /etc/ppp/options or /etc/ppp/postoptions that was causing that -- unless there was a script that specifically called for maxconnect to be used as an option.
/usr/sbin/pppd is the executable that handles ppp connection. it's not a matter of Internet Connect being sensitive to it; that is what handles the actual ppp connection.

Connection time out error in server proxy

Hi
My scenario is file to proxy. . It is synchronous scenario.
I am giving wait time as input and in the proxy i wrote a code to wait till the inputed value and after that send a response. it is working fine only if i give less than 60 sec.
If i specify above 60 sec i am getting the connection time out error in SXMB_MONI.
Please help me to solve this.
Regards
Divia

To increase Timeout use
Go to transaction SMICM........ Goto->services......choose HTTP.....edit this service.........increase maximum processing time and activate this service
look blog for timeouts:
The specified item was not found.

Oracle 10g dataguard Connect-time failover Parameter 15 minutes

Hello,
we running a system with DataGuard in Maximum Availability protection mode and one physical Standby Database. There are two connections between primary and standby. I configured listener and tnsnames to perform a Connect-time failover in case one connection is down. In first place it seemed to work fine but since it has happened that the primary always hangs for exactly 15 minutes until the failover is performed. (ALL redologs need archiving)
I think this must be the default value of a Parameter but reading docs for hours I can't find it.
Can anybody help me?
Best regards
Fritz

It's like this. The connection failover I'm talking about is only between the primary database and standby database. I have two connections between them. That makes two addresses for the service (servicetostandby) specified in the log_archive_dest used by dataguard. In my case the log_archive_dest Paramater looks like this:
log_archive_dest_3 = 'SERVICE servicetostandby OPTIONAL LGWR SY
NC AFFIRM VALID_FOR=(ONLINE_LO
GFILES,PRIMARY_ROLE) DB_UNIQUE
NAME=standby REOPEN=10 NETTIME
OUT=9'
The tnsnames.ora entry looks like this:
servicetostandby =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = address1)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = address2)(PORT = 1521))
(FAILOVER=true)
(LOAD_BALANCE=false)
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = standby)
So if either address1 or address2 is down dataguard should use the other address to connect to the standby database.
Maybe because of the Maximum Availability protection mode the primary database does not perform if the standby database is not available. I'm not sure about that. But fact is that if I power off the standby database, the primary database hangs only for 9 seconds. That's specified in the net_time_out attribut of the log_archive_dest Parameter. So I'm quite sure that something in the oracle net service causes the problem.
With the "primary hangs" I mean: After the used connection (say address1) went down the redologfiles of the primary database get filled and then it stops for 15 minutes. The messages in the alert.log:
Thread 1 cannot allocate new log, sequence 1304
All online logs needed archiving
After 15 minutes the connection via address2 is established and everything works fine.
I hope I made myself clear this time and didn't confuse you totally.
Edited by: user633694 on Apr 14, 2009 8:13 AM

RFC Adapter CC Maximum connection.

Hi Experts,
In our scenario in RFC Communication channel the maximum connection parameters is blank. In that field there not specified any figure. so please can you tell me in that case how many connections it will take by default.
Regards
Prabhakar.A

HI,
Per day in my scenario nearly 600 files will process. RFC used for RFC lookup by passing the country code to ecc system that ecc system is generate the sequential number and send it to the XI system mapping. some times the sequential number is not getting to the target field. can you please sugest me the solution.
Regards,
Prabhakar.A

ORA - Maximum Connections Reached

Dear All
Even after implementing Connection pooling in our Application , we very often get this error "150 process exceede- Maximum Connection reached" ? How do we handle this? Our application is about to GoLive in another month .Please help us.
Thanks
AKS

It was simple to plan a download calendar in the case of exceeding maximum connections.
I think this rerolve.
1-"In this momment isn't not possible too manny connections"
2-Please your type of modem: xpto / xpt1 / xpt2 / etc...
3-Calculating 'tracert time'
3-Calculating time max: x minutes min: y minutes
4-Plan a download time:
TODAY DD1/MM1/YYYY1
-HOURS-
10 -
11 -
12
13 -
DD1/MM1/YYYY1
10
11 -
12 -
13
14
15 -
DD1/MM1/YYYY1
10
11
12
13 -
14 -
15
..

Maximum Connections Oracle can provide

I have this query, how many maximum connections does oracle provide to any applications server.
I am aware that the number of connections are configurable. But i wanted to know the maximum number of connections after which there is a possibilty of oracle to crash, or after these particular number connectins oracle wont support any more connections.
Please help me with this, as im in desperate need of a solution.
Thanx for your time.
Nikhil

There is no functional limit to the number of connections Oracle can support. There may be some internal limit (i.e. session ID may be an integer, which would limit you to 4 billion connections on a 32-bit system) but I've never heard of anyone actually hitting such a limit. In reality, you will be constrained by your hardware long before you are constrained by Oracle.
Unfortunately, estimating how many connections your particular hardware can support is not trivial. It depends, obviously, on your hardware, but it also depends on your application and on how your database is configured-- shared server vs. dedicated server would be the largest factor here.
Justin
Distributed Database Consulting, Inc.
http://www.ddbcinc.com/askDDBC

Connecting Time Capsule with WildBlue Satellite Service

HELP! Please...
I am trying to set up Time Capsule to work with my satellite service, WildBlue, and I can't get it working properly.
Before WildBlue was installed, I connected my iMac and my wife's iMac (it's on Mac OS 10.5.0), one at a time, with Time Capsule directly via Ethernet and back-up each iMac.
WildBlue satellite service was installed yesterday and the installer had no idea how to hook everything up. It was his first install. I was able to connect the WildBlue modem via Ethernet directly to my wife's Mac and made it work. When I try to add the Time Capsule, that's where I run into problems.
I ran the Ethernet cable from the WildBlue modem to the Internet WAN port on Time Capsule and I could not get it to work at all via AirPort. I tried using AirPort Utility and System Preferences - Network and could not get anything to work. I then ran an Ethernet cable from one of the four Ethernet plugs on the back of Time Capsule to the Ethernet plug on the back of my wife's iMac and was able to connect to the internet and get email on her Mac. I tried to run Time Machine, but it can't find Time Capsule! The only way it seems that I can get her iMac to do anything is to either connect it directly to the modem without Time Capsule or run the Ethernet cable thru Time Capsule to the iMac and not be able to connect to Time Machine. I still could not connect my iMac (it's on Mac OS 10.5.4) via Airport no matter what I did.
Can someone help me so that I can get Time Capsule connected and working the way it should?
My understanding is that I should be able to connect Time Capsule to the WildBlue modem via Ethernet and then connect my wife's iMac directly to Time Capsule via Ethernet and still be able to run Time Machine to back-up her iMac. Her iMac and the WildBlue modem sit in the same room together and my iMac is on the other side of the house where I want to use AirPort to connect to Time Capsule so that I can back-up my iMac and have access to the internet. If this isn't the way it is going to work can someone explain it to me on how it should and how I should set everything up to work correctly?
Thank you in advance for any help you can provide me.
Rod

You can, but devices connected to the D-Link switch will drop to a maximum of 100 Mbps speeds. The Time Capsule supports 1,000 Mbps or Gigabit speeds.
If you plan to transfer a lot of files using Ethernet, the numbers speak for themselves.

Java Socket Connection Time out

Goal*
I want to check host/port availability of computers in our network (~100 computers) .. Just check if host is alive and if it has port 445 opened. I want to do this somehow in parallel, so the code execution is as quick as possible.
My implementation*
I do this by creating socket connection to the host. Something like this:
        Socket s = null;
        try {
            s = new Socket();
            InetSocketAddress socketAddress = new InetSocketAddress(ipAddress, 445);
            s.connect(socketAddress, 3000);
            if (s.isConnected()) {
                // do something
        } catch (ConnectException ex) {
            //exception thrown
        } catch (IOException ex1) {
            //exception thrown
        } finally {
            try {
                // close socket
                s.close();
            } catch (IOException ex) {
                Logger.getLogger(ComputerModel.class.getName()).log(Level.SEVERE, null, ex);
        }This code is executed in a loop, where a separate thread is created for every iteration = ~100 separate threads.
Problem:*
1.
It seems to me, that first ~10-15 connections are created ok, but then my code reaches 'IOException' catch block for every subsequent itteration and ex.getMessage() returns "connection time out" (I try to use different timeout values in the 2nd parameter. Values from 3000 up to 20000).
Is it valid to create 100 separate threads in a loop? Can't I make my NIC to bussy with this ??? What is the maximum ammount of threads, I can create? I did not use threads before, so I have no idea, if max values are near to 10, 100, 1000, or 10000 ..
2.
After my code is executed, I enter 'netstat -an' command in my command line and I get bunch of connections, which report status of SYN_SENT for several connections.
TCP 10.20.11.140:4557 10.30.11.119:445 SYN_SENT
TCP 10.20.11.140:4558 10.30.11.176:445 SYN_SENT
TCP 10.20.11.140:4559 10.30.11.100:445 SYN_SENT
TCP 10.20.11.140:4560 10.30.11.142:445 SYN_SENT
TCP 10.20.11.140:4561 10.30.11.171:445 SYN_SENT
TCP 10.20.11.140:4562 10.30.11.143:445 SYN_SENT
TCP 10.20.11.140:4563 10.30.12.12:445 SYN_SENT
TCP 10.20.11.140:4564 10.30.12.11:445 SYN_SENT
TCP 10.20.11.140:4565 10.30.12.21:445 SYN_SENT
TCP 10.20.11.140:4566 10.30.11.150:445 SYN_SENT
I also feel, that my computer network response (e.g. firefox browsing) is a bit slower ..
How shall I handle this problem properly?
Thx in advance,
Juraj

kajbj wrote:
tschodt wrote:
kajbj wrote:
The documentation for netstat explains what SYN_SENT is, but
I don't know why you have them.The app has asked the TCP stack to transmit SYN
the TCP stack is now waiting for SYN-ACK.
If there is no host at that IP address or a host that drops connections (SYN packets) for TCP port 445
there will never be a SYN-ACK.
After a few minutes the TCP stack will time out the connection attempt.Yes, I was rather commenting on why his hosts aren't answering. I thought that his case was that all of them should answer :)Akkurat. I was answering more for clarification.
Someone who does not know your posting history could easily assume you meant
it was a mystery why netstat was showing SYN_SENT.
And I figured it would not harm to hint that one possible reason would be that those machines are powered off (no host).

Application Maximum Connection Reached

Hi there,
I have installed a new Application Server and I have my forms and reports running on it. My users have receive an error as above. It seems the AS can only allow 20 max concurrent user?
How can i enlarge it? My server should be able to cater to more than that.
Thanks

It was simple to plan a download calendar in the case of exceeding maximum connections.
I think this rerolve.
1-"In this momment isn't not possible too manny connections"
2-Please your type of modem: xpto / xpt1 / xpt2 / etc...
3-Calculating 'tracert time'
3-Calculating time max: x minutes min: y minutes
4-Plan a download time:
TODAY DD1/MM1/YYYY1
-HOURS-
10 -
11 -
12
13 -
DD1/MM1/YYYY1
10
11 -
12 -
13
14
15 -
DD1/MM1/YYYY1
10
11
12
13 -
14 -
15
..

JDBC Maximum Waiting Time

What is maximum waiting time parameter in jdbc connecton?
Is it like when a client accesses the database if there is not connection available the client waits the certain period of time until someone releases the resource?

Hi Skip Ford,
Follow these links
http://www.java2s.com/Code/Java/Database-SQL-JDBC/GetdatefromOracle.htm
http://ramblingabout.wordpress.com/2007/01/26/remember-date-time-timestamp/
http://www.oracle.com/technology/tech/java/sqlj_jdbc/htdocs/jdbc_faq.htm
Regards,
Santosh.

Maximum Connections exceeds

i have a html page that contains 6 dynamically created URL's one of them is mentioned bellow
<b>http://hercules.keells.lk:8000/sap/bw/BEx?sap-language=%20&bsplanguage=%20&cmd=ldoc&TEMPLATE_ID=ZL1TACH</b>
The problem is everytime the page is loaded it creates 6 sessions (user connections) & after i refresh the page a few times.. it will give me the maximum connections exceeded error...
How can i use only one session (connection) for this page & display 6 web queries /??????

append the following to your URL
<b>&STATELESS=X</b>
where is this html page (which contains the 6 webtemplate) running from - is it a BSP application?
Regards
Raja

When trying to update my 3Gs phone with the new ios5 software, it will download the software but then i get a message saying connection time has timed out. what am i doing wrong? i checked my network, its fine

When i try to update my iphone with the new software, it will give me a message that says connection time timed out, and then it says some other little things about a network not having a connection. i checked all of that and it is all fine. Im not sure why it is not working. i even restarted my laptop, all of my stuff is up to date. Does any one have any sollutions or any advice? Please and thank you!

This is asked and answered mnay times every day. The forum search abr is on the right side of this page.
Disable your firewall/security software.

Itunes update to firmware fails, because connection times out.

I have been unsuccessfully attempting to update my iphone 3gs and ipad to iOS 5 for over a month now. I have spent many, many hours on this, and many phone calls to apple support. I disable Norton 360, and windows firewall, and my firewall on my router. I've tried updating my router's firmware, which bricked the router--thanks apple for insisting this was the problem, and I have replaced the router, with a new one. Itunes diagnostics gives me the following information. I am using itunes as the administrator in Windows 7, 64 bit, although itunes doesn't recognize it, unless I reinstall it as the administrator, but then once I restart the computer, itunes no longer recognizes that I using Windows as an admin.
Also, the firmware cannot update, because the connection times out, despite all my firewalls, and antivirus being turned off.
I've tried downloading iOS 5 and then updating using restore, but that didn't work. I've poured through support forums, and error codes: I get 1611, etc. Cannot seem to resolve this.
Any ideas?
Microsoft Windows 7 x64 Ultimate Edition Service Pack 1 (Build 7601)
System manufacturer System Product Name
iTunes 10.5.0.142
QuickTime not available
FairPlay 1.13.35
Apple Application Support 2.1.5
iPod Updater Library 10.0d2
CD Driver 2.2.2.0
CD Driver DLL 2.1.1.1
Apple Mobile Device 4.0.0.96
Apple Mobile Device Driver 1.57.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.3.494
Gracenote MusicID 1.9.3.106
Gracenote Submit 1.9.3.136
Gracenote DSP 1.9.3.44
iTunes Serial Number 0040A7BC031F98E0
Current user is not an administrator.
The current local date and time is 2011-11-15 11:35:00.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
ATI Technologies Inc., ATI Radeon HD 4800 Series
**** External Plug-ins Information ****
No external plug-ins installed.
The drive F: HL-DT-ST DVDRAM GP08LU30 Rev 1.00 is a USB 1 device.
iPodService 10.5.0.142 (x64) is currently running.
iTunesHelper 10.5.0.142 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name:          {01DC2EA3-0DD0-4A51-80A6-7B414E4C6291}
Description:          Realtek PCIe GBE Family Controller
IP Address:          192.168.2.2
Subnet Mask:          255.255.255.0
Default Gateway:          192.168.2.1
DHCP Enabled:          Yes
DHCP Server:          192.168.2.1
Lease Obtained:          Tue Nov 15 11:32:39 2011
Lease Expires:          Tue Nov 15 11:32:38 2011
DNS Servers:          192.168.2.1
Active Connection:          LAN Connection
Connected:          Yes
Online:                    Yes
Using Modem:          No
Using LAN:          Yes
Using Proxy:          No
SSL 3.0 Support:          Enabled
TLS 1.0 Support:          Enabled
Firewall Information
Windows Firewall is on.
iTunes is enabled in Windows Firewall.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was successful.
Connection attempt to firmware update server was unsuccessful.
The network connection timed out.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2011-11-15 11:33:52.

Disable your firewall/security software and try again.

ASA5510 - Maximum connect time

Similar Messages

Maybe you are looking for