ASA5510 not reaching a particular IP
I hope you can help me do bear with me as I'm still starting with Cisco products,
We have a Cisco ASA 5510 Base License with 7.08 our provider assigned us x.x.199.41 as gateway while the ASA is on x.x.199.42 in the 255.255.255.248 subnet... I tried mapping our servers with x.x.199.43 on server1 and x.x.199.44 on server2... server2 can be reached from outside while server1 is unreacheable and our provider is insisting the issue is with our firewall configuration below is our running config.. hope anyone can point me in the right direction... thanks!
ASA Version 7.0(8)
names
dns-guard
interface Ethernet0/0
nameif Public
security-level 0
ip address x.x.199.42 255.255.255.248
interface Ethernet0/1
nameif Private
security-level 5
ip address 192.168.10.250 255.255.255.0
interface Ethernet0/2
shutdown
no nameif
no security-level
no ip address
interface Management0/0
nameif management
security-level 100
ip address x.x.0.1 255.255.255.0
management-only
ftp mode passive
object-group network inside-network
access-list Private_access_in extended permit ip any any
access-list Private_access_in extended permit icmp any any
access-list Private_access_out extended permit ip any any
access-list Private_access_out extended permit icmp any any
access-list Public_access_in extended permit ip any any
access-list Public_access_in extended permit icmp any any
access-list Public_access_out extended permit ip interface Public any
access-list Public_access_out extended permit icmp interface Public any
access-list MYLIST1 extended permit ip 192.168.10.0 255.255.255.0 192.168.1.0
255.255.255.0
access-list NONAT extended permit ip 192.168.10.0 255.255.255.0 192.168.1.0
255.255.255.0
access-list NONAT extended permit ip 192.168.10.0 255.255.255.0 192.168.6.0
255.255.255.0
access-list NONAT extended permit ip 192.168.10.0 255.255.255.0 192.168.7.0
255.255.255.0
access-list NONAT extended permit ip 192.168.10.0 255.255.255.0 192.168.100.0
255.255.255.0
access-list MYLIST2 extended permit ip 192.168.10.0 255.255.255.0 192.168.6.0
255.255.255.0
access-list MYLIST3 extended permit ip 192.168.10.0 255.255.255.0 192.168.7.0
255.255.255.0
access-list MYLIST3 extended permit ip 192.168.10.0 255.255.255.0
192.168.100.0 255.255.255.0
pager lines 24
logging asdm informational
mtu Public 1500
mtu Private 1500
mtu management 1500
no asdm history enable
arp timeout 14400
global (Public) 1 interface
nat (Private) 0 access-list NONAT
nat (Private) 1 0.0.0.0 0.0.0.0
static (Private,Public) x.x.199.44 192.168.10.252 netmask 255.255.255.255
static (Private,Public) x.x.199.43 192.168.10.251 netmask 255.255.255.255
access-group Private_access_in in interface Public
access-group Private_access_in out interface Public
access-group Private_access_in in interface Private
access-group Private_access_in out interface Private
route Public 0.0.0.0 0.0.0.0 x.x.199.41 1
route Public 192.168.1.0 255.255.255.0 x.x.6.160 1
route Public 192.168.6.0 255.255.255.0 x.x.135.113 1
route Public 192.168.7.0 255.255.255.0 x.x.197.68 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00
timeout mgcp-pat 0:05:00 sip 0:30:00 sip_media 0:02:00
timeout uauth 0:05:00 absolute
http server enable
http 192.168.1.0 255.255.255.0 management
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec transform-set MYSET esp-3des esp-sha-hmac
crypto ipsec security-association lifetime seconds 3600
crypto ipsec security-association lifetime kilobytes 4608000
crypto map MYMAP 10 match address MYLIST1
crypto map MYMAP 10 set peer x.x.6.27
crypto map MYMAP 10 set transform-set MYSET
crypto map MYMAP 10 set security-association lifetime seconds 3600
crypto map MYMAP 10 set security-association lifetime kilobytes 4608000
crypto map MYMAP 20 match address MYLIST2
crypto map MYMAP 20 set peer x.x.135.113
crypto map MYMAP 20 set transform-set MYSET
crypto map MYMAP 20 set security-association lifetime seconds 3600
crypto map MYMAP 20 set security-association lifetime kilobytes 4608000
crypto map MYMAP 30 match address MYLIST3
crypto map MYMAP 30 set peer x.x.197.68
crypto map MYMAP 30 set transform-set MYSET
crypto map MYMAP 30 set security-association lifetime seconds 3600
crypto map MYMAP 30 set security-association lifetime kilobytes 4608000
crypto map MYMAP interface Public
isakmp identity address
isakmp enable Public
isakmp policy 10 authentication pre-share
isakmp policy 10 encryption 3des
isakmp policy 10 hash sha
isakmp policy 10 group 2
isakmp policy 10 lifetime 86400
isakmp nat-traversal 20
tunnel-group x.x.6.27 type ipsec-l2l
tunnel-group x.x.6.27 ipsec-attributes
pre-shared-key *
tunnel-group x.x.135.113 type ipsec-l2l
tunnel-group x.x.135.113 ipsec-attributes
pre-shared-key *
tunnel-group x.x.197.68 type ipsec-l2l
tunnel-group x.x.197.68 ipsec-attributes
pre-shared-key *
telnet timeout 5
ssh timeout 5
console timeout 0
class-map inspection_default
match default-inspection-traffic
policy-map global_policy
class inspection_default
inspect dns maximum-length 512
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect icmp
service-policy global_policy global
Cryptochecksum:dc521e98e6fa2918e524835d45dbd0e0
: end
Hi,
The "static" statement seems to be normal atleast. (Though we can't see the whole statement. But I assume you've made sure the public IP is entered correctly)
Your ACL setup seems strange though.
You are using the same access-list for both interfaces for both directions.
This is just my personal opinion but you will be fine with using a separate access-list for both interfaces and only apply them to "in" direction.
My basic access-list that I do is INSIDE-IN and OUTSIDE-IN and have the interface names as "inside" and "outside". Configuration stays really simple.
Also your security-level configurations seem abit unsual (although I guess it doesnt really cause any problems in this case) Again, the very basic setup would be to have "inside" as "100" and "outside" as "0"
Personally I would first have someone try connection to the service that you are running on the server thats not working. At the same time I would open the ASAs ASDM and see from the monitoring what is happening to the connection. Is it showing up on the firewall and if it is, what is happening to the connection.
I'm not sure if the "packet-tracer" command was included in the 7.0 software (didn't find it in the command reference for 7.0 atleast) but if it does exist in your software, try to command out and see whats happening to the connections from outside.
Also doing a traffic capture would be one option.
http://www.cisco.com/en/US/docs/security/asa/asa70/command/reference/c.html#wp1950270
Also does the problem server have its default gateway set correctly? As you are using an address ending with .250 as the ASA interface IP address. Though this question is due to my personal preference again since I usually use the first address after the network address as the interface address.
- Jouni
Similar Messages
-
BC CASE:: File not Reaching XI to BW System even message is success in MONI
Hi! Gurus,
This is Amar Srinivas Eli. Here I am facing one important issue. we are transferring data from SAP XI --> BW System via RFC's through FTP Server using Sender File(FTP) to receiver RFC Module.
<b>
But issue is we are able to send messages from XI but that particular files not reaching to BW system
Here we checked the below following:: </b>
1.SXMB_MONI:: Success Message its Showing success status and Black and White FLag is obtained and is reflecting every time success from XI SIde
2. SMQ1 & SMQ2 :: No Messages in both the queues.
3. We checked RFC COnnections ::
every thing is fine and all are active.
4. Communication Channel Monitoring::
Both Sender as well as Receiver CC are showing Status Green and Error Free
5. I checked with BASIS Trace on my User ID:
in that analysis every thing is fine means no red colour error.
NOte:: This Scenario is become Success only once if the XI server is restarted once then the file is reaching BW system in remaining cases one day File is picking successfully and another day file is not even picking.
WHY THIS UNEVEN IN SERVER AND tell me if there is any mistake or else any issue with RFC or Still I need to do any thing from my part as a XI Developer,.
Kindly answer it as it is a BC Case.
THanks
Amar Srinivas EliHi! Vijay,
I already mentioned that I have chcked even in SXMB_MONI as well as SMQ1 and SMQ2.
1. In MONI If you placing a file in FTP server it was picking from FTP Server and is howing success message in MONI (Blacka nd White Flag)
2. I also checked in Both the queues SMq1 and Smq2no messages and no queues are remained in Queues
3. Even I checked CC Channel Monitoring
both sender and receiver Cc's are Green and Error free.So
So,Please provide any other solution for why it was not reaching to BW system even though All RFC Connections are fine and acitive.
Thanks
Amar Srinivas -
Could not reach dscc agent, check cacaoadm status on remote server
Dear All,
Below issue, am able to see here discussed previously, but it was not resolved properly, hence please help me here to understand more.
We are trying to create a new ldap instance remotely from the DSCC server, but able to see that the particular remote server dscc agent port 11162 is not accessible from DSCC server. While trying to create a new instance, able to get an error message as " could not reach dscc agent on XXX server, Use the command cacaoadm command to check that the dscc agent is installed and running on the port 1162"
Possible reason which could have
1] Cacao not running on the XXX box
Answer: Verified its status, the service is running and also the particular port is on listen mode
bash-3.00# cacaoadm status
default instance is ENABLED at system startup.
Smf monitoring process:
18452
18453
Uptime: 0 day(s), 0:23
bash-3.00# netstat -an | grep 11162
*.11162 *.* 0 0 49152 0 LISTEN
2] The cacao by default is listening to its loop back address and need to change its values to 0.0.0.0 for accepting all connections.
Answer: We were already changed its value to 0.0.0.0 [ In one thread there was an advise to change to host IP address, we tried that one also]
bash-3.00# cacaoadm list-params | grep network
network-bind-address=0.0.0.0
3] Firewall level block happening for port 11162
Presently we are investigating this part.
But I were trying to find out any other issue can cause this problem? I were able to see multiple thread were pointing same error message, but were not that much helpful compare to our present situation. When am doing a telnet attempt from DSCC server to XXX server, its failing. Not sure exactly firewall is blocking this connection or cacao not able to establish connection from outside. Please advise
Thanks,For starters try using a telnet from the dscc to the cacao port on the remote server, to make sure you can connect. If you can, I've seen similar issues, when the remote server can't resolve the hostname of the dscc server. Make sure the remote server has the dscc hostname in it's /etc/hosts file, or if you're using DNS make sure you can resolve the dscc, and do the same on the dscc, make sure it can resolve the hostname of the remote server.
Hope this helps!
Matt -
Graphs: columns are not reaching the correct axis data.
I am so frustrated with Illustrator's graphs and charts!
I've watched the Lynda.com videos and created several graphs. But in particular is not working correctly. I've entered the data correctly but the column are not reaching correct Value Axis. For example: one value is 11%, instead of the column reaching just above the 10% tick mark it is below it. This is happening for all the data in the chart.
I have created a column design with the %00 code to display the values above the columns and it seems to be including the height of the text in the column height.
Any suggestions to fix this?
HELP!Have you already read this: http://help.adobe.com/en_US/illustrator/cs/using/WS3f28b00cc50711d9fc86fa8133b3ce158e-8000 .html#WS714a382cdf7d304e7e07d0100196cbc5f-61a3a
"Create a sliding column design"
The text will be part of the design no matter where the invisible rectangle is located. -
ERROR partner 'localhost:sapgw00' not reached
Hi,
i have BI system with portal. when i am trying to connetct portal with url http://<hostnaem>/<ip>:<portnumber>/irj/portal ---it is displaying as 500 internel server error with java.lang.NullPointerException: null .
i am keeping here two logfiles 1.dev_jrfc.trc 2.defaulttrace.trc here under for your reference.
1..dev_jrfc.trc --log
Error> occured >Tue Feb 17 04:52:46,483<
RfcException:
message: Connect to SAP gateway failed
Connect_PM TYPE=A ASHOST=localhost SYSNR=00 GWHOST=localhost GWSERV=sapgw00 PCS=1
LOCATION CPIC (TCP/IP) on local host with Unicode
ERROR partner 'localhost:sapgw00' not reached
TIME Tue Feb 17 04:52:46 2009
RELEASE 700
COMPONENT NI (network interface)
VERSION 38
RC -10
MODULE nixxi.cpp
LINE 2513
DETAIL NiPConnect
SYSTEM CALL connect
ERRNO 146
ERRNO TEXT Connection refused
COUNTER 10
Return code: RFC_FAILURE(1)
error group: 102
key: RFC_ERROR_COMMUNICATION
Error> occured >Tue Feb 17 04:52:46,503<
RfcException:
message: Connect to SAP gateway failed
Connect_PM TYPE=A ASHOST=localhost SYSNR=00 GWHOST=localhost GWSERV=sapgw00 PCS=1
LOCATION CPIC (TCP/IP) on local host with Unicode
ERROR partner 'localhost:sapgw00' not reached
TIME Tue Feb 17 04:52:46 2009
RELEASE 700
COMPONENT NI (network interface)
VERSION 38
RC -10
MODULE nixxi.cpp
LINE 2513
DETAIL NiPConnect
SYSTEM CALL connect
ERRNO 146
ERRNO TEXT Connection refused
COUNTER 12
Return code: RFC_FAILURE(1)
error group: 102
key: RFC_ERROR_COMMUNICATION
2.DefaultTrace.trc --log
<!LOGHEADER[START]/>
<!HELP[Manual modification of the header may cause parsing problem!]/>
<!LOGGINGVERSION[1.5.3.7185 - 630]/>
<!NAME[./log/defaultTrace.trc]/>
<!PATTERN[defaultTrace.trc]/>
<!FORMATTER[com.sap.tc.logging.ListFormatter]/>
<!ENCODING[UTF8]/>
<!FILESET[14, 20, 10485760]/>
<!PREVIOUSFILE[defaultTrace.13.trc]/>
<!NEXTFILE[defaultTrace.15.trc]/>
<!LOGHEADER[END]/>
#1.5 #00144FAC097C006C000000550000723800045E43F3A75D87#1229545850494#com.sap.engine.services.security#sap.com/tcjetrace~app#com.sap.engine.services.security#J2EE_GUEST#0##n/a##2f24ad50cc6c11dd974500144fac097c#SAPEngine_Application_Thread[impl:3]_9##0#0#Error#1#/System/Security#Java#security_3031##Cannot get run_as identity for the security role "admnistrator".#1#admnistrator#
#1.5 #00144FAC097C006C000000560000723800045E43F3A776EC#1229545850500#com.sap.engine.services.security#sap.com/tcjetrace~app#com.sap.engine.services.security#J2EE_GUEST#0##n/a##2f24ad50cc6c11dd974500144fac097c#SAPEngine_Application_Thread[impl:3]_9##0#0#Error#1#/System/Audit#Java###Exception #1#com.sap.engine.services.security.exceptions.BaseSecurityException: Cannot get run_as identity for the security role "admnistrator".
at com.sap.engine.services.security.roles.SecurityRoleContextImpl.getRunAsIdentity(SecurityRoleContextImpl.java:662)
at com.sap.engine.services.security.roles.SecurityRoleReference.getRunAsIdentity(SecurityRoleReference.java:183)
at com.sap.engine.services.servlets_jsp.server.runtime.context.SessionServletContext.getSubject(SessionServletContext.java:598)
at com.sap.engine.services.servlets_jsp.server.runtime.context.ApplicationContext.getSubject(ApplicationContext.java:893)
at com.sap.engine.services.servlets_jsp.server.runtime.context.WebComponents.destroyServlets(WebComponents.java:720)
at com.sap.engine.services.servlets_jsp.server.container.ApplicationThreadDestroyer.run(ApplicationThreadDestroyer.java:62)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
Caused by: com.sap.security.api.PrincipalNotAccessibleException: Connect to SAP gateway failed
Connect_PM TYPE=A ASHOST=localhost SYSNR=00 GWHOST=localhost GWSERV=sapgw00 PCS=1
LOCATION CPIC (TCP/IP) on local host with Unicode
ERROR partner 'localhost:sapgw00' not reached
TIME Wed Dec 17 15:30:50 2008
RELEASE 700
COMPONENT NI (network interface)
VERSION 38
RC -10
MODULE nixxi.cpp
LINE 2513
DETAIL NiPConnect
SYSTEM CALL connect
ERRNO 146
ERRNO TEXT Connection refused
COUNTER 16
at com.sap.security.core.imp.AbstractPrincipal.getPrincipalDatabagValues(AbstractPrincipal.java:1787)
at com.sap.security.core.imp.Principal.setDirectChildrenInternal(Principal.java:501)
at com.sap.security.core.imp.AbstractPrincipalSet.getUserMembersInternal(AbstractPrincipalSet.java:393)
at com.sap.security.core.imp.AbstractPrincipalSet.getUserMembers(AbstractPrincipalSet.java:210)
at com.sap.security.core.imp.AbstractPrincipalSet.getUserMembers(AbstractPrincipalSet.java:129)
at com.sap.security.core.imp.GroupWrapper.getUserMembers(GroupWrapper.java:29)
at com.sap.security.core.server.userstore.GroupInfoUME.engineGetUsersInGroup(GroupInfoUME.java:181)
at com.sap.security.core.server.userstore.GroupContextUME.engineGetUsersOfGroup(GroupContextUME.java:379)
at com.sap.engine.services.security.userstore.context.GroupContext.getUsersOfGroup(GroupContext.java:191)
at com.sap.engine.services.security.roles.SecurityRoleContextImpl.getUserFromGroup(SecurityRoleContextImpl.java:775)
at com.sap.engine.services.security.roles.SecurityRoleContextImpl.getUserFromRole(SecurityRoleContextImpl.java:763)
at com.sap.engine.services.security.roles.SecurityRoleContextImpl.generateValidRunAsPrincipal(SecurityRoleContextImpl.java:719)
at com.sap.engine.services.security.roles.SecurityRoleContextImpl.getRunAsIdentity(SecurityRoleContextImpl.java:610)
... 9 more
#1.5 #002128049C66006D00000049000023EF0004631BF918D17E#1234871701262#com.sap.engine.services.servlets_jsp.client.RequestInfoServer#sap.com/irj#com.sap.engine.services.servlets_jsp.client.RequestInfoServer#J2EE_GUEST#0##n/a##ce792bd0fce911dda3de002128049c66#SAPEngine_Application_Thread[impl:3]_12##0#0#Error##Plain###application [irj] Processing HTTP request to servlet [gateway] finished with error. The error is: java.lang.NullPointerException
at com.sap.portal.navigation.Gateway.service(Gateway.java:126)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
#1.5 #002128049C66006D0000004B000023EF0004631BF918E565#1234871701267#com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl#sap.com/irj#com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl#J2EE_GUEST#0##n/a##ce792bd0fce911dda3de002128049c66#SAPEngine_Application_Thread[impl:3]_12##0#0#Error#1#/System/Server/WebRequests#Plain###application [irj] Processing HTTP request to servlet [gateway] finished with error.
The error is: java.lang.NullPointerException: null
Exception id: [002128049C66006D00000049000023EF0004631BF918D17E]#
#1.5 #002128049C66007200000033000023EF0004631BFBCDBE0A#1234871746674#com.sap.engine.services.servlets_jsp.client.RequestInfoServer#sap.com/irj#com.sap.engine.services.servlets_jsp.client.RequestInfoServer#J2EE_GUEST#0##n/a##e98aa520fce911ddb1ff002128049c66#SAPEngine_Application_Thread[impl:3]_18##0#0#Error##Plain###application [irj] Processing HTTP request to servlet [gateway] finished with error. The error is: java.lang.NullPointerException
at com.sap.portal.navigation.Gateway.service(Gateway.java:126)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
#1.5 #002128049C66007200000035000023EF0004631BFBCFAC76#1234871746800#com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl#sap.com/irj#com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl#J2EE_GUEST#0##n/a##e98aa520fce911ddb1ff002128049c66#SAPEngine_Application_Thread[impl:3]_18##0#0#Error#1#/System/Server/WebRequests#Plain###application [irj] Processing HTTP request to servlet [gateway] finished with error.
The error is: java.lang.NullPointerException: null
Exception id: [002128049C66007200000033000023EF0004631BFBCDBE0A]#
#1.5 #002128049C66006700000026000023EF0004631DEA2AFCFF#1234880040729#com.sap.engine.services.servlets_jsp.client.RequestInfoServer#sap.com/irj#com.sap.engine.services.servlets_jsp.client.RequestInfoServer#J2EE_GUEST#0##n/a##392f0090fcfd11ddbd79002128049c66#SAPEngine_Application_Thread[impl:3]_26##0#0#Error##Plain###application [irj] Processing HTTP request to servlet [gateway] finished with error. The error is: java.lang.NullPointerException
at com.sap.portal.navigation.Gateway.service(Gateway.java:126)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
#1.5 #002128049C66006700000028000023EF0004631DEA2B0507#1234880040731#com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl#sap.com/irj#com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl#J2EE_GUEST#0##n/a##392f0090fcfd11ddbd79002128049c66#SAPEngine_Application_Thread[impl:3]_26##0#0#Error#1#/System/Server/WebRequests#Plain###application [irj] Processing HTTP request to servlet [gateway] finished with error.
The error is: java.lang.NullPointerException: null
Exception id: [002128049C66006700000026000023EF0004631DEA2AFCFF]#
please help on this issueHi,
Somewhere the address is not getting resolved. I would suggest you to enter IP address instead of the hostname in the RFC (SM59).
Hope this helps.
Manoj Chintawar -
Sap-nw:3300 not reached error in gateway
Dear experts,
I am facing a strange problem after a successful installation of netweaver Java+abap.
when i start the server i found this error
**** ERROR file opened at 20100131 114242 Arab Standard T, SAP-REL 700,0,113 RFC-VER 3 911150 MT-SL
T:2844 Error in program 'igsmux': ======> CPIC-CALL: 'SAP_CMNOREGTP'
LOCATION CPIC (TCP/IP) on local host
ERROR partner 'sap-nw:3300' not reached
TIME Sun Jan 31 11:42:42 2010
RELEASE 700
COMPONENT NI (network interface)
VERSION 38
RC -10
MODULE nixxi.cpp
LINE 2770
DETAIL NiPConnect2
SYSTEM CALL connect
ERRNO 10061
ERRNO TEXT WSAECONNREFUSED: Connection refused
COUNTER 1
i ignore the error and i tried to login
after successful login to the portal server when i access the user administration tab. the explorer show
SAP WebAS Engine is starting...
If this state does not change within a few minutes,
please contact your system administrator.
Check the recommendations in SAP Notes: 943498, 764417
Message: Dispatcher running but no server connected!
and the server turns to yellow again when it turns to green again
i checked dev_rd
Sun Jan 31 13:11:15 2010
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
*** ERROR => NiIRead: SiRecv failed for hdl 9 / sock 268
(SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:1205) [nixxi.cpp 4424]
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
*** ERROR => NiIRead: SiRecv failed for hdl 6 / sock 304
(SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:1148) [nixxi.cpp 4424]
***LOG S23=> GwIDisconnectClient, client disconnected (006) [gwxxrd.c 11592]
***LOG S74=> GwIDisconnectClient, client disconnected ( sap-nw) [gwxxrd.c 11603]
***LOG S0R=> GwIDisconnectClient, client disconnected () [gwxxrd.c 11638]
***LOG S0I=> GwIDisconnectClient, client disconnected ( jlaunch) [gwxxrd.c 11651]
* LOCATION SAP-Gateway on host sap-nw / sapgw00
* ERROR connection to partner 'sap-nw:1148' broken
* TIME Sun Jan 31 13:11:15 2010
* RELEASE 700
* COMPONENT NI (network interface)
* VERSION 38
* RC -6
* MODULE nixxi.cpp
* LINE 4424
* DETAIL NiIRead
* SYSTEM CALL recv
* ERRNO 10054
* ERRNO TEXT WSAECONNRESET: Connection reset by peer
* COUNTER 232
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
*** ERROR => NiIRead: SiRecv failed for hdl 10 / sock 256
(SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:1206) [nixxi.cpp 4424]
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
*** ERROR => NiIRead: SiRecv failed for hdl 11 / sock 244
(SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:1208) [nixxi.cpp 4424]
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
*** ERROR => NiIRead: SiRecv failed for hdl 12 / sock 232
(SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:1207) [nixxi.cpp 4424]
then i try to login again with the browser it give me
Portal Runtime Error
An exception occurred while processing your request
Exception id: 01:27_31/01/10_6192950
See the details for the exception ID in the log file.
any help would be appreciated
<br>
i also wanted to add that telnet 3300 works fine ping to host name is ok
my os win2003 sap 2004s sr3
Edited by: ebrahime on Jan 31, 2010 11:37 AMthanks for your reply. i wanted to add 2 thing after the installation the password i entered in installation was not working for all the super users that is why i had to delete SAP* from database and change the j2ee_Admin password.
you mentioned that the java stack is unable to communicate with abap stack but i can login to portal by j2ee_admin user. but when i go to identity management then it give the error i gave you earlier.
any way the dev_w0 file contents is bellow
trc file: "dev_w0", trc level: 1, release: "700"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, MJ
B
B Tue Feb 02 10:23:01 2010
B create_con (con_name=R/3)
B Loading DB library 'F:\usr\sap\ENP\DVEBMGS00\exe\dbdb6slib.dll' ...
B Library 'F:\usr\sap\ENP\DVEBMGS00\exe\dbdb6slib.dll' loaded
B Version of 'F:\usr\sap\ENP\DVEBMGS00\exe\dbdb6slib.dll' is "700.08", patchlevel (0.144)
C DbSl trace SM50: switch request to level 1
B New connection 0 created
M sysno 00
M sid ENP
M systemid 562 (PC with Windows NT)
M relno 7000
M patchlevel 0
M patchno 144
M intno 20050900
M make: multithreaded, Unicode, 64 bit, optimized
M pid 1604
M
M kernel runs with dp version 232000(ext=109000) (@(#) DPLIB-INT-VERSION-232000-UC)
M length of sys_adm_ext is 576 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 1604) [dpxxdisp.c 1305]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M DpShMCreate: sizeof(wp_adm) 25168 (1480)
M DpShMCreate: sizeof(tm_adm) 5652128 (28120)
M DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
M DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
M DpShMCreate: sizeof(comm_adm) 552080 (1088)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
M DpShMCreate: sizeof(slock_adm) 0 (104)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (72)
M DpShMCreate: sizeof(vmc_adm) 0 (1864)
M DpShMCreate: sizeof(wall_adm) (41664/36752/64/192)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: SHM_DP_ADM_KEY (addr: 0000000010E70050, size: 6348592)
M DpShMCreate: allocated sys_adm at 0000000010E70050
M DpShMCreate: allocated wp_adm at 0000000010E72150
M DpShMCreate: allocated tm_adm_list at 0000000010E783A0
M DpShMCreate: allocated tm_adm at 0000000010E78400
M DpShMCreate: allocated wp_ca_adm at 00000000113DC2A0
M DpShMCreate: allocated appc_ca_adm at 00000000113E2060
M DpShMCreate: allocated comm_adm at 00000000113E3FA0
M DpShMCreate: system runs without slock table
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 000000001146AC30
M DpShMCreate: allocated gw_adm at 000000001146ACB0
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 000000001146ACE0
M DpShMCreate: allocated wall_adm at 000000001146ACF0
M ThTaskStatus: rdisp/reset_online_during_debug 0
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
X <EsNT> Using memory model view.
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M
M Tue Feb 02 10:23:02 2010
M ThInit: running on host ENP
M
M Tue Feb 02 10:23:03 2010
M calling db_connect ...
C Registering callback for dynamic profile parameters
C DB2 library successfully loaded DB2 library 'F:\usr\sap\ENP\DVEBMGS00\exe/db6_clidriver\bin\db2app64.dll' successfully loaded
C
C DB6 (DB2 UDB) UNICODE database interface 700.08 [opt]
C
C DB6 shared library (dbdb6slib) patchlevels
C (0.8) DB6: V8.2.2 optguidelines in OPEN SQL (note 150037)
C (0.8) Support of SDBUPDEXCL (note 847616)
C (0.9) DB6: use export file for dbdb6slib (note 835135)
C (0.9) DB6: Core in getAndBindSQLDA (note 833183)
C (0.10) DB6: link dbdb6slib.dll on windows with libdb6.obj (note 761159)
C (0.10) DB6: DUPLICATE_KEY on MERGE -> repeat (note 851474)
C (0.15) DB6: wrong CAST for short string ABAP type (note 861905)
C (0.17) DB6: special characters in sidadm passwd (note 865839)
C (0.21) DB6: no SAP_INFO comments (note 873889)
C (0.22) DB6: hints: get correlation names from view texts (note 868888)
C (0.23) DB6: hints: get correlation names from view texts (note 868888)
C (0.26) DB6: DB6_DBSL_CLP_COMMAND STRING_BAD_REF (note 883402)
C (0.27) DB6: activate value compression (note 886231)
C (0.28) DB6: optimization guidelines on views part 2 (note 868888)
C (0.30) DB6: no SQL trace for SQLCancel (note 892111)
C (0.33) DB6: append SAP_TA comment (note 873889)
C (0.34) DB6: activate value compression with quoted names (note 886231)
C (0.36) DB6: Repeat isolated DDL statements after SQL0911 (note 901338)
C (0.41) DB6: add V9 to list of supported DB2 releases (note 912386)
C (0.50) DB6: reread passwords for secondary connections (note 931742)
C (0.52) DB6: double quote table names in optguidelines (note 868888)
C (0.54) DB6: error handling in DBSL CLP (note 940260)
C (0.69) DB6: technical support of DB2 CLI driver (note 962892)
C (0.73) DB6: log table name on TRUNCATE failure (note 970743)
C (0.79) DB6: column type XML in index size calculation (note 982993)
C (0.82) DB6: CAST for SSTRING data types (note 989568)
C (0.86) DB6: long runtimes for R3szchk (note 1000847)
C (0.88) DB6: patch collection Dec 06 (note 1005574)
C (0.96) DB6: patch collection Jan 07 (note 1017852)
C (0.97) DB6: CLP commands with DB2 CLI Driver (note 1024102)
C (0.99) DB6: SUBSTITUTE VALUES with FAE statements (note 1028779)
C (0.107) DB6: patch collection Apr 07 (note 1047194)
C (0.110) DB6: SAP user names ending with non-ASCII char (note 1054555)
C (0.113) DB6: work process type in application snapshot (note 1059905)
C (0.114) DB6: connect using SAPDBHOST and DB2DB6_SVCENAME (note 1062049)
C (0.117) DB6: patch for execution of long DDL statements (note 1069658)
C (0.122) DB6: SNAPSHOT_TBS_CFG table function is deprecated (note 1077963)
C (0.123) DB6: CLP commands on Windows with V9.1 (note 1080149)
C (0.124) DB6: Set DB2CODEPAGE=819 for non-Unicode (note 1084400)
C (0.126) DB6: reuse optguidelines on FAE statements (note 1087375)
C (0.126) DB6: Enforce DB2CODEPAGE=819 for non-Unicode environments (note 1084400)
C (0.128) DB6: db6_free on invalid memory area (note 1092030)
C (0.133) DB6: statement cache enhancements (note 1101031)
C (0.136) DB6: change for enhancement pack installer (note 1111536)
C (0.138) DB6: improoved table size estimate for DB8 V8 (note 1119934)
C (0.144) I5/OS ldappasswd support for 5250 terminal. (note 1129573)
C (0.144) MSSQL: ODBC fastload on separate connection (note 1131805)
C
C Supported features:
C
C ..retrieving configuration parameters
C ..done
C Running with UTF-8 Unicode
C
C Tue Feb 02 10:23:04 2010
C Running with CLI driver
C DB2 client driver version '09.01.0007'
C Connected to DB2 server type 'DB2/NT64'
C Connected to DB2 version '09.01.0007'
C Connect to 'ENP' as 'SAPENP' schema 'SAPENP' o.k.; con_hdl=0
C Database code page is ok.
C Database collating sequence is ok.
C DB2_WORKLOAD=SAP is set in DB2 registry as required.
C CLI Insert Buffering is disabled on single partition databases.
C DbSl trace SM50: switch request to level 1
C DbSlControl: returning SAPDBHOST='ENP'
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO YES NO 000 255 255 20100202 102303 ENP
C DbSlControl: returning SAPDBHOST='ENP'
M db_connect o.k.
M ICT: exclude compression: .zip,.cs,.rar,.arj,.z,.gz,.tar,.lzh,.cab,.hqx,.ace,.jar,.ear,.war,.css,.pdf,.js,.gzip,.uue,.bz2,.iso,.sda,.sar,.gif
I
I Tue Feb 02 10:23:05 2010
I MtxInit: 0 0 0
M SHM_PRES_BUF (addr: 0000000015400050, size: 4400000)
M SHM_ROLL_AREA (addr: 000007FFDDA80050, size: 268435456)
M SHM_PAGING_AREA (addr: 0000000015840050, size: 134217728)
M SHM_ROLL_ADM (addr: 000000001D850050, size: 2678942)
M SHM_PAGING_ADM (addr: 000000001DAE0050, size: 525344)
M ThCreateNoBuffer allocated 544152 bytes for 1000 entries at 000000001DB70050
M ThCreateNoBuffer index size: 3000 elems
M ThCreateVBAdm allocated 12176 bytes (50 server) at 000000000AE50050
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
X ES initialized.
B db_con_shm_ini: WP_ID = 0, WP_CNT = 17, CON_ID = -1
B dbtbxbuf: Buffer TABL (addr: 0000000021540160, size: 30000000, end: 00000000231DC4E0)
B dbtbxbuf: Buffer TABLP (addr: 00000000231E0160, size: 10240000, end: 0000000023BA4160)
B dbexpbuf: Buffer EIBUF (addr: 0000000023BC0170, size: 4194304, end: 0000000023FC0170)
B dbexpbuf: Buffer ESM (addr: 0000000023FD0170, size: 4194304, end: 00000000243D0170)
B dbexpbuf: Buffer CUA (addr: 00000000243E0170, size: 3072000, end: 00000000246CE170)
B dbexpbuf: Buffer OTR (addr: 00000000246D0170, size: 4194304, end: 0000000024AD0170)
M CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
S *** init spool environment
S initialize debug system
T Stack direction is downwards.
T debug control: prepare exclude for printer trace
T new memory block 00000000128BEA10
S spool kernel/ddic check: Ok
S using table TSP02FX for frontend printing
S 1 spool work process(es) found
S frontend print via spool service enabled
S printer list size is 150
S printer type list size is 50
S queue size (profile) = 300
S hostspool list size = 3000
S option list size is 30
S found processing queue enabled
S found spool memory service RSPO-RCLOCKS at 000000002DDF00D0
S doing lock recovery
S setting server cache root
S found spool memory service RSPO-SERVERCACHE at 000000002DDF0610
S using messages for server info
S size of spec char cache entry: 297032 bytes (timeout 100 sec)
S size of open spool request entry: 2272 bytes
S immediate print option for implicitely closed spool requests is disabled
A
A -PXA--
A PXA INITIALIZATION
A PXA: Locked PXA-Semaphore.
A System page size: 4kb, total admin_size: 11460kb, dir_size: 11392kb.
A Attached to PXA (address 000007FFEDAB0050, size 300000K)
A abap/pxa = shared protect gen_remote
A PXA INITIALIZATION FINISHED
A -PXA--
A
A ABAP ShmAdm attached (addr=000007FF35ED5000 leng=20955136 end=000007FF372D1000)
A >> Shm MMADM area (addr=000007FF363AEF10 leng=244096 end=000007FF363EA890)
A >> Shm MMDAT area (addr=000007FF363EB000 leng=15622144 end=000007FF372D1000)
A RFC Destination> destination ENP_ENP_00 host ENP system ENP systnr 0 (ENP_ENP_00)
A RFC Options> H=ENP,S=00,d=2,
A RFC FRFC> fallback activ but this is not a central instance.
A
A RFC rfc/signon_error_log = -1
A RFC rfc/dump_connection_info = 0
A RFC rfc/dump_client_info = 0
A RFC rfc/cp_convert/ignore_error = 1
A RFC rfc/cp_convert/conversion_char = 23
A RFC rfc/wan_compress/threshold = 251
A RFC rfc/recorder_pcs not set, use defaule value: 2
A RFC rfc/delta_trc_level not set, use default value: 0
A RFC rfc/no_uuid_check not set, use default value: 0
A RFC rfc/bc_ignore_thcmaccp_retcode not set, use default value: 0
A RFC Method> initialize RemObjDriver for ABAP Objects
M ThrCreateShObjects allocated 35354 bytes at 000000002DF60050
N SsfSapSecin: putenv(SECUDIR=F:\usr\sap\ENP\DVEBMGS00\sec): ok
N
N =================================================
N === SSF INITIALIZATION:
N ===...SSF Security Toolkit name SAPSECULIB .
N ===...SSF trace level is 0 .
N ===...SSF library is F:\usr\sap\ENP\DVEBMGS00\exe\sapsecu.dll .
N ===...SSF hash algorithm is SHA1 .
N ===...SSF symmetric encryption algorithm is DES-CBC .
N ===...completed with return code 5.
N =================================================
N MskiInitLogonTicketCacheHandle: Logon Ticket cache pointer retrieved from shared memory.
N MskiInitLogonTicketCacheHandle: Workprocess runs with Logon Ticket cache.
M JrfcVmcRegisterNativesDriver o.k.
W =================================================
W === ipl_Init() called
B dbtran INFO (init_connection '<DEFAULT>' [DB6:700.08]):
B max_blocking_factor = 30, max_in_blocking_factor = 60,
B min_blocking_factor = 1, min_in_blocking_factor = 1,
B prefer_union_all = 1, prefer_join = 1,
B prefer_fix_blocking = 0, prefer_in_itab_opt = 0,
B convert AVG = 1, alias table FUPD = 0,
B escape_as_literal = 0, opt GE LE to BETWEEN = 0,
B select * =0x0f, character encoding = STD / <none>:-,
B use_hints = abap->1, dbif->0x3, upto->2147483647, rule_in->0,
B rule_fae->0, concat_fae->0, concat_fae_or->0
W ITS Plugin: Path dw_gui
W ITS Plugin: Description ITS Plugin - ITS rendering DLL
W ITS Plugin: sizeof(SAP_UC) 2
W ITS Plugin: Release: 700, [7000.0.144.20050900]
W ITS Plugin: Int.version, [33]
W ITS Plugin: Feature set: [16]
W ===... Calling itsp_Init in external dll ===>
W === ipl_Init() returns 0, ITSPE_OK: OK
W =================================================
N VSI: WP init in ABAP VM completed with rc=0
E Enqueue Info: rdisp/wp_no_enq=1, rdisp/enqname=<empty>, assume ENP_ENP_00
E Replication is disabled
E EnqCcInitialize: local lock table initialization o.k.
E EnqId_SuppressIpc: local EnqId initialization o.k.
E EnqCcInitialize: local enqueue client init o.k.
M
M Tue Feb 02 10:23:06 2010
M SecAudit(RsauShmInit): WP attached to existing shared memory.
M SecAudit(RsauShmInit): addr of SCSA........... = 000000000A960050
M SecAudit(RsauShmInit): addr of RSAUSHM........ = 000000000A9607C0
M SecAudit(RsauShmInit): addr of RSAUSLOTINFO... = 000000000A960800
M SecAudit(RsauShmInit): addr of RSAUSLOTS...... = 000000000A96080C
M
M Tue Feb 02 10:23:28 2010
M rdisp/rb_cleaned_rfc = 0
A
A Tue Feb 02 10:23:34 2010
A RFC FRFC> fallback on the central gateway ENP sapgw00 activ -
When I try to download the ebook I bough, the Adobe Digital Reader shows the following message: "can not reach server". Can someone please help me with this?
TO be precise, it says "licensee server communication problem"
Thank youThe thread running through your explanation has to do with connectivity to your server. (iCloud out of the blue asking for password, unable to message your boyfriend, unable to access e-mail). You said that you boyfriend restart his device and then the two of you were able to then imessage. My best advice for you would be to go to settings to reset to reset network settings. Once this has been done you then will need to enter the name and password of your wifi. ONce this is done you then can attempt to check to see that all passwords are enter correctly.
Good luck. -
Goods delivered but not reached to customer (in transit)
Hi All,
I have a scenario that, we have done the delivery, Invoice, Excise Invoice and the goods have moved to customeru2019s place (in transit) but they have not reached to customer, and due to some reason goods have come back to the Factory. And the same goods will be sent after a week. What are all the processes I need to do at plant level?
My plant is Excisable.
Plz suggest me.
Thanx n Regards,
RamDear Ramu
On your comments
As suggested by u, I have done the processes i.e.
1.Return order created with respect to billing doc No
2.Retun delivery (PGR)
3.Return for credit (VF01)
"4.Cancel Excise Invoice (J1IEH)"
5.Updated RG23A Part-II.
fourth process mentioned above is wrong. You should not cancel the original excise invoice. Only you have to make necessary adjustments in J1IH.
For updation of excise related sales returns, run T.Code J1IH and do the following:-
Customer Credit
Choose the Additional excise input the original excise invoice reference, document year, company code, plant and excise group and execute. There input manually what value you need to give credit and save.
Cenvat Debit
Choose Other Adjustment and here also, maintain the datas whatever you input as above and save.
Once you do this exerecise in J1IH, the relative registers will get updated.
thanks
G. Lakshmipathi -
EBP Orders not reaching to SAP R/3
Hi All,
I have an issue, EBP Order not reaching to R/3, and showing PO status as Error .
I have checked all assignments (cost centre, vendor) are ok,
Can any one suggest what it may be the problem for this?
Thanks in advance,
Regards,
KrishHi Please check the following....
1) As mentioned by other users see if RZ20 is still showing an error for this PO.
2) If the error is old, try to change the description of the PO and order to re-generate the error.
3) Error in process usually is due to diferences in the way SRM and R/3 works. All budgeting and accounting is maintained in R/3 so SRM might not properly display a hard stop for those errors until handled by custom code. Similarly some changes to PO are not accepted on the R/3 side after the receipts are entered.
Hope this helps. -
Pages app unexpectedly quit whilst I was in the middle of a document. I can now not open it AT ALL. I find it's not just that particular document that won't open, but any of my Pages docs will not open using the current version of Pages. The reports of the app unexpectedly closing each time, automatically went to Apple, but I am not sure what happens with them then. Does anyone know how to help me with this? We live in a very isolated region so rely on internet help. Thanks
I also managed to read a few other discussions about Pages and files not being able to open. I actually went to the last back-up and restored the computer from that and everything seemed to work ok again, which is great!...advice from another discussion I think you may have been involved in PeterB. Thanks for the advice...also this advice, as I will make a note of trying to open using the Shift key if it happens again and see what happens...might be an easier first option than restoring from a back-up. Thans heaps for the help!
I was interested to read some of the other discussions where it was stated that Pages '09 seems to be a better option to use. I have both installed, so I will lkeep this in mind. Thanks heaps! -
MATMAS01 IDOC not reaching to SAP XI via report program.
Dear Experts,
WE are facing small challenge.
I searched on SDN on scenarios: IDOC not reaching to SAP XI. But could not find exact solution t oour scenario.
Problem:
MATMAS01 IDOC is not reaching to SAP XI via report program and is in status of 03 on SAP system. And there are not entries under SM58.
Under SAP XI system IDOC entry is not reflecting under IDX5 transaction, I tried to delete meta data of MATMAS01 thru IDX1 and uploaded again but still IDOC is not reaching to SAP XI.
The strange is that MATMS01 IDOC is reaching to XI via WE19 test tool. So PORT and RFC destination settings betweeen R3 and XI is also correct.
What could be the wrong ?
Thanks
DivyeshWhen sending Idoc from R/3,
Settings at R/3
create one port at WE21,
Create Partner Profile for Outbound Message type in WE20.
settings at XI
Create one port in IDX1
Import Matadata in IDX2.
Create complete scenario in ESR for Idoc sender, also import IDoc in Imported Objects.
Check these settings & send test idoc using WE19. -
ABAP Objects - Sapgui 46D - Partner not reached
Im a starter, completely new to SAP ABAP Objects.
Just installed the 2 CDs delivered with the book ABAP Objects from Horst Keller and Sascha Krüger.
Installed on a stand alone portable Windows XP Pro service pack 2.
No other links to SAP or internet.
First I start Start SAP MBS, is OK
Then start SAP Logon 46D
After the selection of a Description I get the following error message.
Partner not reached (host localhost, service sapdp00)
Time
Release 46D
Component NI(network interface)
Version 34
Return Code -10
Module ninti.c
Line 1008
Detail NiPConnect2
System Call SO_ERROR
Error NO 10061
Error Text WSAECONNREFUSED. Connection refused
Counter 1
Can some one explain me what is need in solving this problem. (Im completely new in SAP)
For the moment I could not find a simple explanation on how to solve this.if you look at the installation documentation in the CD there is a prerequisites which will require to you to configure the MS loop back adapter by entering a specific IP address. check out the documentation in the CD.
Regards
Raja
When you have the latest ABAP NW2004s available for download in SDN why do you want to go for the old one. Unless otherwise there is any specific reason i would strongly suggest you to download the latest minisap (SAP netweaver sneakpreview ABAP NW2004s ) -
24" LCD has Super short mini-display cable that does not reach
I was setting up a 24" display (on an LCD arm) and i noticed the mini display cable is very, very short. It does not reach to the Mac Pro under the desk. I guess the 24" displays were made for laptops and did not expect that the cables would need to reach under a desk.
I couldn't find a Mini-display to Mini-display extender. Does anyone know of one?
Anyone considering two 24" monitors might want to review their own setup, to see if it works with the exceptionally short mini display video cables on the 24" display.
Message was edited by: Charles BaroneCharles, did you ever find a solution for this problem? I am ready to get a new Mac Pro and 24" display, but a 3 foot (1 meter?) cable is about two feet too short. I don't want to have the MP box sitting between my feet so it can be within 3' of the connector at the back of the display. I talked with someone at the on-line apple store today and he checked with an engineer and looked at the cable that comes with the display, and it was indeed only ~3' long. Since this type of monitor connection (the mini display port) is supposedly going to become the new "standard", I would hope that companies (e.g., Belkin, etc) will have high quality but longer cables available. I assume that the cable you have has the same mini display port plug on each end, and no adaptors are necessary?
If anyone has a solution to this short cable dilemma, please chime in!
Thanks -
MDM:A notice does not reach a iPhone.
A notice does not reach a terminal.
Please let me know.
Hello. Thank you.
iPhone 4S iOS 5.1
I wrote the following ruby script.
And it performed from the MDM server.
However, a notice does not reach an iPhone terminal.
Please let me know.
A setup by ."mobileconfig" was completed and the topic and the device token have been PUT to the MDM server.
It checked that the right information was also acquirable,
It is confirmed that renewal of a message or a badge is made to an iPhone terminal in APNs.
Only APNs of MDM does not reach an iPhone terminal.
I would like to solve this problem.
If you please, please help me.
#!/usr/bin/ruby -Ku
require 'openssl'
require 'socket'
print("start"<<"\n");
(msg = []) << "dd0b64b77ebcac2092d6fe644d4db04e39d577c0228cf2187d8f87966aff8234"
device = msg.pack("H*")
socket = TCPSocket.new('gateway.sandbox.push.apple.com',2195)
# socket = TCPSocket.new('gateway.push.apple.com',2195)
context = OpenSSL::SSL::SSLContext.new('SSLv3')
context.cert = OpenSSL::X509::Certificate.new(File.read('nj_dev_apns-dev.pem'))
context.key = OpenSSL::PKey::RSA.new(File.read('nj_dev_apns-dev-key-noenc.pem'))
ssl = OpenSSL::SSL::SSLSocket.new(socket, context)
ssl.connect
payload = <<-EOS
# "mdm":"{<PushMagic>}"
{"mdm":"7C68976X-E70D-485Q-8CA7-7AC48F2F5F4A"}
EOS
(message = []) << ['0'].pack('H') << [32].pack('n') << device << [payload.size].pack('n') << payload
ssl.write(message.join(''))
ssl.close
socket.close
print("OK!"<<"\n");Update:
If I go to network in the dashboard it DOES see the airport but will not let me connect. I keep getting "connection failed." I know I have the right password ect. but no idea why it will not let me join.
Do I need to get the paperclip out and reset the airport??? -
FB99 check archiving status - Withholding tax life (455 days) not reached
Hi to all,
We are in process of archiving SAP data.
Requirement: There are 2 company codes in one production client and we want both company codes to be separated as independent clients. So we are archiving one of the company codes in existing client.
Since we want separate clients & require only one company code data in each client, we want to archive all the documents as on date.
I am archiving FI documents through Archiving Object FI_DOCUMNT in SARA transaction. Before archiving we have to clear all open items for the FI documents, for that am checking document archiving status through FB99.I am getting following message for one of the line item
u2018Withholding tax life (455 days) not reached u201C.
I have set document life (OBR8) and account type life (OBR7) form 9999 to 1 day.
Regards
GovindHi Govind,
The document life and acount type life is not the same as the withholding tax life. The witholding tax life is country-specific and cannot be overridden. I do not believe there is a way around this.
Best Regards,
Karin Tillotson
Maybe you are looking for
-
How to populate automatically in a when-new-record-instance trigger?
I have a form which displays around ten rows with about 5 columns. Whenever i will create a new record, i would like to place an initial value on the first column of every record. How do I do this? If I place the value in the properties of the item,
-
I have a music collection on my iPod (160GB Classic). I have that collection on my old Mac Book. Now I have a new Mac Pro and want to transfer the collection to the new Mac Pro, is that doable?
-
HT1926 ITunes 11 install issue, Error 7 (Windows error 126)
While trying to install ITunes11 on a Windows Desktop with MS XP SP3 I keep getting an error message that states "ITunes was not installed correctly.Please reinstall ITunes.Error 7(Windows error 126)".There is an initial message that states that "App
-
AppleTV (2nd gen) working fine but LED is off
My Apple TV (2nd gen) is working fine but today the white LED is off. I tried to disconnect from the electricity but it doesn't helped. I also made a restored to factory settings but it is still off. Yesteday I used at night to watch a movie and the
-
Varient( STD_SHORTFALL ) giving dump in program RCNMR000
Hi All, Could anyone give me the solution for the dump I am getting in program RCNMR000, When ever I m selecting the variant STD_SHORTFALL its giving following dump. Short text Unable to interpret "c " as a number. Its in the standard program.