ASA5510 Security plus Licence - Need Gigabit interface

Hi,
i am using asa 5510 version 8.2 and i want to upgrade my licence with the security plus licence because I need one interface ( eth0/1) to be in Gigabit.
Whats the process to install this licence and can we choose on which interface will be the gigabit function or is it only on eth0/0 and eth0/1?
Thank you

In addition to Rudy's correct answer, the process for installing it is to use your PAK which you will receive when you purchase the license to get an activation key issued (via the self-service Cisco licensing portal or by calling the TAC and asking for licensing).
You enter the PAK code plus your serial number and get an activation key specific to your hardware. A simple one line command then activates it. No service interruption is required to activate the license (at least not directly) but it's generally recommeded to shcedule a reload (service-affecting of course) to make sure the license stays put after cycling the firewall.
Hope this helps. Please rate helpful answers.

Similar Messages

ASA5510 Security Plus + Anyconnect Essentials = BASE?

Recently upgraded a 5510 to Anyconnect Essentials and Anyconnect Mobile, the device was Security Plus and is now Base. Is it supposed to work this way? I lost my Gigabit interfaces. Is it possible to have Security Plus + Anyconnect Essentials?

I'm sure this should be OK.
I had a similar problem with an ASA 5505 that had been upgraded to Sec Plus and subsequently Anyconnect Mobile. TAC were able to sort it out very rapidly and issue the correct license file.

Can I traffic shape to 200Mbps on ASA5510 inculde security plus license ?

Hello Expert,
I have ASA5510. It's include security plus license.
I want to traffic shape to 200Mbps. But , I checked a CCO.
CCO said that a shaping limit is 154400000.
"Enables traffic shaping, where the average rate argument sets
    the average rate of traffic in bits per second over a given fixed
    time period, between 64000 and 154400000. "
It's mean shaping limit 154400000 ?
Can I shape to 200Mbps ?
regards,
takuro.

Takuro,
Yes what you found is correct.
http://www.cisco.com/en/US/docs/security/asa/asa84/command/reference/s1.html#wp1451099
you can do upto 154.40 Mbps
-Kureli

Upgrade from WCS Base to Plus Licence

Hi,
I purchased the Cisco WCS Base licence WCS-APBASE-50 however need the Plus licence.
Q1. If I purchase WCS-PLUS-UPG-50 will this give me the plus licence?
Q2. Once I purchase WCS-PLUS-UPG-50, how do I upgrade from my Base licence to Plus? Can you do this on the Cisco website?
Thanks,

Here is a link that helps explain the WCS license. WCS is EOS and NCS has taken that over. Prime Infrastructure replaces NCS:) what you should look at is the WCS to Prime Migration license. You will be able to keep you WCS license and have the plus which is built in with NCS. Plus they throw in a 25 license.
http://www.cisco.com/en/US/prod/collateral/wireless/ps5755/ps6301/ps6305/product_data_sheet0900aecd804b4646.html
Sent from Cisco Technical Support iPhone App

Upgradation of cisco ASA5505 IOS to Security plus license

Hi Team,
I do have Base license IOS (asa805-k8.bin) in my ASA5505 & i want to upgrade it to Security plus IOS.
Can you please guide me about the same?
Can you tell me the procedure for the same?
Thanks & Regards
Manish Sarolkar

You should purchase the Security plus license through Cisco partner, and once you purchase it, you will need to obtain the activation key from [email protected] The activation key then can be entered to the ASA via the "activation-key" command as follows:
http://www.cisco.com/en/US/docs/security/asa/asa80/command/reference/a2.html#wp1623546
Hope that helps.

I go onto manage account to change the security questions because I've forgotten them but to get onto the security section i need to answer security questions. What do I do???

I go onto manage account to change the security questions because I've forgotten them but to get onto the security section i need to answer security questions. What do I do???

Ok, so I had the same problem. What you should do is, call the
Apple Technical Support number: (44) 0844 209 0611
And ask for the Account Security Team. This worked for me.

I need to interface SCC-TC02 with help of SC 2345 and PCI-6024E DAQ Card.please tell me the procedure and if possible send me the program

Dear Friends,
I need to interface SCC-TC02 with help of SC 2345 and PCI-6024E DAQ Card.But i can not understand example program.please send me the procedure to interface these three componnets and if possible send me the program.
With Regards,
Eswaramoorthy K V

nce of nth triggering pulse. i need to know when the when the ist trigger occurs and when the nth trigger occurs . please tell me how to to . what i know is that event triggering has to be done with start and stop trigger. please tell me how it has to doneSuresh;
What you will need to do is to set up a digital start and stop triggered Analog Input acquisition. Then you will need to have a counter set as event counter, having the specific number of pulses you need configured as the preset value, configured to count down, and generating a pulse after the terminal count has been reached. That counter output will be the stop trigger of the Analog Input operation. In summary, you will have the external pulse being both the digital trigger of the Analog Input operation and the source pin of the counter, and the counter output being the digital stop signal for the analog input.
I'm attaching a Labview VI that does the start and stop analog input acquisition. You will need to include the counter part and set the stop s
ignal to be the counter output.
Hope this helps.
Filipe
Attachments:
AI_Start-Stop_D-Trig.zip ‏25 KB

I forgot the security questions I need to send me again

I forgot the security questions I need to send me again

You need to ask Apple to reset your security questions; ways of contacting them include clicking here and picking a method for your country, phoning AppleCare and asking for the Account Security team, and filling out and submitting this form.
(100885)

Licence needed for Developer Studio ?

Hi all,
is a licence needed for installing SAP NetWeaver Developer Studio ?
Thanks in advance.

You donot need a license for developer studio.
It is based on Eclipse which you can download and install without license anyway.
You will need a (developers) license for the developers workplace however. This is the version where you also run your local Netweaver J2EE. If you donot have a license, after 30 days or so the J2EE wil stop (approx. 30 minutes after startup) with an error message like: no valid license.
The license for the Developers Workplace can be requested like any other license. Your basis team will know the details.
Jurjen.
([https://websmp205.sap-ag.de/licensekey|https://websmp205.sap-ag.de/licensekey])

Hello I was charged twice for adobe story plus, I need this problem corrected and a refund issued for one of the subscription charges, I tried chatting with Adobe and they were unable to help me. Where is email support?

Hello I was charged twice for adobe story plus, I need this problem corrected and a refund issued for one of the subscription charges, I tried chatting with Adobe and they were unable to help me. Where is email support?

This is an open forum, not Adobe support... you need Adobe staff to help
Adobe contact information - http://helpx.adobe.com/contact.html
-Select your product and what you need help with
-Click on the blue box "Still need help? Contact us"
-or by telephone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html

HT201303 Where is this security code you need????

Where is the security code you need from my c.c?

Cheese it wrote:
I am furious!!!!!!
You and I. Are not on the same page :(
I put in my code on the back of the card and they said its incorrect, and nothing on my card has changed for years except the expiration date.
So what do I need to do??????
Well, first, the security code changes every time that the expiration date changes. Second, who is "they?" I can not read minds. Third, take this up with your credit card carrier.

I forgot my security answers and need to reset them to put new how can I do this?

forgot my security answers and need to reset them to put new how can I do this?

You need to ask Apple to reset your security questions; ways of contacting them include clicking here and picking a method for your country, phoning AppleCare and asking for the Account Security team, and filling out and submitting this form.
(98689)

Urgent .. FMS origin & edge licence needed

we've developed some Flash video applications that will have
1000
(avg.) to 5000 (at peak time) connections for a very large
scaled
project in Turkey. We have all tested our applications with
Developer
Edition and when we made sure that everything is ok, we
decided to
start the project. I have checked this adobe website for
contact about
FMS licences. I could not found any office or reseller number
in
turkiye. so i tried the numbers from the beginning. all of
the
contacts that i ve talked took my name my office number my
company
name etc. but again none of them helped me about the
situation. they
all redirected me to other support numbers. (both in US,UK
and
Amsterdam) i wasted 2 weeks (both day and night because of
the time
zone issues). of course none of the contacts helped me about
my
questions. most of them were unaware of Origin Edge licences.
After
calling about 100 contacts (which is also not quite cheap if
you are
calling abroad) they told me that maybe "insight" could help
me. Then
i wasted another 2 days with insight contacts then they told
me that
they are not allowed to sell products because of their tax
issues.
Anyway i have found an adobe distributor in istanbul by
google search
(also none of US or UK adobe offices had knew any contact in
Turkey).
They also send me to a reseller. And i have wasted another
week with
them. What they told about FMS Origin&Edge licences was
in conflict
with the ones that had told me by a US department. (And also
a
department told me that Edge and Origin licences are
different. Edge
is for +1000 connections and Origin is for +5000 connections.
Adobe
should try to teach them some =) ) Anyway we had also
confused about
licence needs. Ali Halac (medyasoft-istanbul) really helped
us a lot
about all the issues but there was still some that they also
have to
learn by Bilkom (adobe partner). But we (and they) couldnt
reach any
contact in Bilkom because they were in vacation. So it has
been nearly
1 month and i cant still get enough information about the
licence that
i need. i 've checked all the whitepapers blogs vs. about
Origin&Edge
licences but couldnt find enough information though. Now i
need some
one that can directly help me about this issue? Any email or
telephone
number?

i also dont think that this would be really helpful but i
tried almost Everything. I really dont know what to do now. we are
thinking to start an opensource project to stream over rtmp with C.
Coding what we need in C would not take more than a month. I have
no one to help me in USA. And as you know there is not much
information about Origin&Edge licences. They only say that it
starts from 45.000$. so i also dont know the price. i think that
maybe ones that had similar problems before can help me.

HT204266 I forgot the answers to the security questions and need it to buy things from the apple store in my new iPhone, how can I resolve it? Thank you

I forgot the answers to the security questions and need it to buy things from the apple store in my new iPhone, how can I resolve it?
Thank you

If you have a rescue email address (which is not the same thing as an alternate email address) set up on your account then you can try going to https://appleid.apple.com/ and click 'Manage your Apple ID' on the right-hand side of that page and log into your account. Then click on 'Password and Security' on the left-hand side of that page and on the right-hand side you might see an option to send security question reset info to your rescue email address.
If you don't have a rescue email address then see if the instructions on this user tip helps : https://discussions.apple.com/docs/DOC-4551

AIR-AP3502i gigabit interface issue

Support Community,
          I currently have an issue with my AIR-AP3502i gigabit interface. I connect my AIR-AP3502i to my 3560G POE switch and the port will not negotiate to1GB. I have tried auto negotiate and hard coded settings but when I try those settings the switch and AP interfaces go into an up down state. Has anyone seen this issue before?

Never mind, I was mistaken, the command was there. Thanks for the new command.
Interface Speed Local pair Pair length        Remote pair Pair status
Gi0/7     100M Pair A     0    +/- 4 meters Pair A      Normal
                Pair B     132 +/- 4 meters Pair B      Fail
                Pair C     110 +/- 4 meters Pair C      Fail
                Pair D     1    +/- 4 meters Pair D      Normal
Interface Speed Local pair Pair length        Remote pair Pair status
Gi0/7     100M Pair A     0    +/- 4 meters Pair A      Normal
                Pair B     132 +/- 4 meters Pair B      Fail
                Pair C     110 +/- 4 meters Pair C      Fail
                Pair D     1    +/- 4 meters Pair D      Normal

ASA5510 Security plus Licence - Need Gigabit interface

Similar Messages

Maybe you are looking for