ASA5510 Site2Site Wizard

I am trying to connect our site to a remote site using the Site2Site VPN wizard.  I got the IPSEC tunnel connected without issues..
The problem is that I can't ping from one network to the other...
This is out layout..
10.10.x.x/16 - - ASA5510(site1) <==> ASA5510(site2) - - 10.50.x.x/16
When I ping from the nearest switch to the ASA on 10.10.x.x network to 10.50.x.x, the ASDM syslog output says..
3  Feb 21 2012  20:51:56  10.10.x.x  10.50.x.x  Deny inbound icmp src inside:10.10.x.x dst inside:10.50.x.x (type 8, code 0)
Any advice is greatly appreciated..
Thanks!!!

I am guessing you have a route on your ASA5510 that routes 10.0.0.0/8 to the inside.  What you will need to do is add a static route for 10.50.0.0/16 and point it toward your ISP.  The error message you are seeing is saying that (as far as it knows) traffic is going from 'inside' to 'inside' which really isn't possible without some out of the ordinary configuration on the ASA.
Hope this helps.
Matt

Similar Messages

  • Change ASA5510 to ASA5515-X

    Hi,
    I would like to change ASA5510 to ASA5515-X.
    ASA5510 version is 9.1.1
    Which is the best method to copy the configuration?
    Downtime is acceptable.
    I dont know if backup (with ASDM) ASA5510 configuration and restore on 5515 could work because of their difference (Ethernet, GigabitEthernet for example...)
    Thanks for your help,
    Patrick

    What I've done to copy ASA 5510 configuration to ASA 5515-X without error...
    On ASA 5510 :
    - backup configuration with ASDM --> backup.zip with password
    - copy running-config in a file : backup.cfg
    I modified few lines on backup.cfg:
    - Ethernet to GigabitEthernet
    - boot image
    On ASA 5515-X
    - I configured management interface then I copy many files (dap.xml, <allvpnprofiles>.xml, anyconnect.pkg, ASA, ASDM, backup.cfg)
    - I configure "boot system" and "asdm image"
    - on ASDM, I restored with the wizard and I select Certificate and VPN. (but VPN data was not restored)
    - with CLI, I copied backup.cfg to running-config then write mem
    - there was only few warnings and there was no error after reboot.
    I didnt tried to connect in production but configuration seems correct.
    Patrick

  • RVS4000 -- ASA5510

    hi,
    Today i replaced an old Sonicwall VPN firewall on site2 with a Cisco RVS4000 Gigabit router because of slow throughput these days.
    With the Sonicwall i had something like 20Mbit throuhput, and the RVS4000 has 800Mbps Throughput (normal internet throughput).
    site1 has 100Mbit fiber internet connection with cisco ASA 5510
    site2 has 100Mbit fiber internet connection with cisco RVS4000 (just bought it today)
    RVS4000 has latest firmware V2.0.2.7 and  IPS disabled.
    The VPN connection reconfigured and is working between site1 and site2.
    But the Throughput of copying a file form Site1 to Site1 is very bad and dissapointing! the throuput is like 3Mbit............. so its worse then the very old sonicwall firewall.
    Anyone an idea?

    forgot to mention, i have also a site2site connection from site1 to site3 where site3 als has 100Mbit fiber connection and also a ASA5510, and the VPN throughput is almost 100mbit! so whats happening with the RVS4000

  • ASA5510 VPN not working after upgrade from 8.2 to 8.3

    Hi,
    I have recently upgraded a customer ASA5510 to version 8.3.
    After upgrade web access etc is working fine however VPN is down.
    The config looks very different after the upgrade plus what looks to be duplicate entries.
    I suspect its an access list issue but I'm not sure.
    If anyone has any ideas based on the config below it would be greatly appreciated as I'm at a loss....?!
    hostname ciscoasa
    domain-name default.domain.invalid
    enable password NvZgxFP5WhDo0hQl encrypted
    passwd FNeDAwBbhVaOtVAu encrypted
    names
    dns-guard
    interface Ethernet0/0
    nameif Outside
    security-level 0
    ip address 217.75.8.203 255.255.255.248
    interface Ethernet0/1
    nameif Inside
    security-level 100
    ip address 192.168.1.254 255.255.255.0
    interface Ethernet0/2
    shutdown
    no nameif
    no security-level
    no ip address
    interface Ethernet0/3
    shutdown
    no nameif
    no security-level
    no ip address
    interface Management0/0
    nameif management
    security-level 100
    ip address 10.1.1.1 255.255.255.0
    management-only
    boot system disk0:/asa832-k8.bin
    ftp mode passive
    clock timezone GMT/IST 0
    clock summer-time GMT/IDT recurring last Sun Mar 1:00 last Sun Oct 2:00
    dns domain-lookup Inside
    dns server-group DefaultDNS
    domain-name default.domain.invalid
    object network obj-192.168.1.2-04
    host 192.168.1.2
    object network obj-192.168.1.7-04
    host 192.168.1.7
    object network obj-192.168.1.0-02
    subnet 192.168.1.0 255.255.255.0
    object network obj-192.168.2.0-02
    subnet 192.168.2.0 255.255.255.0
    object network obj-10.1.2.0-02
    subnet 10.1.2.0 255.255.255.0
    object network obj-192.168.1.224-02
    subnet 192.168.1.224 255.255.255.240
    object network obj-192.168.1.9-02
    host 192.168.1.9
    object network obj-192.168.1.2-05
    host 192.168.1.2
    object network obj-192.168.1.103-02
    host 192.168.1.103
    object network obj-192.168.1.7-05
    host 192.168.1.7
    object network NETWORK_OBJ_10.1.2.0_24
    subnet 10.1.2.0 255.255.255.0
    object network NETWORK_OBJ_192.168.1.0_24
    subnet 192.168.1.0 255.255.255.0
    object-group network obj-192.168.1.2-02
    object-group network obj-192.168.1.7-02
    object-group network obj-192.168.1.0-01
    object-group network obj-192.168.2.0-01
    object-group network obj-10.1.2.0-01
    object-group network obj-192.168.1.224-01
    object-group network obj-192.168.1.9-01
    object-group network obj-192.168.1.2-03
    object-group network obj-192.168.1.103-01
    object-group network obj-192.168.1.7-03
    object-group network obj-192.168.1.2
    object-group network obj-192.168.1.7
    object-group network obj-192.168.1.0
    object-group network obj-192.168.2.0
    object-group network obj-10.1.2.0
    object-group network obj-192.168.1.224
    object-group network obj-192.168.1.9
    object-group network obj-192.168.1.2-01
    object-group network obj-192.168.1.103
    object-group network obj-192.168.1.7-01
    object-group network obj_any
    object-group network obj-0.0.0.0
    object-group network obj_any-01
    object-group service MonitcomUDP udp
    port-object range 3924 3924
    access-list Inside_nat0_inbound extended permit ip 192.168.1.0 255.255.255.0 192.168.2.0 255.255.255.0
    access-list Inside_nat0_inbound extended permit ip 192.168.1.0 255.255.255.0 10.1.2.0 255.255.255.0
    access-list Inside_nat0_outbound extended permit ip 192.168.1.0 255.255.255.0 192.168.2.0 255.255.255.0
    access-list Inside_nat0_outbound extended permit ip 192.168.1.0 255.255.255.0 10.1.2.0 255.255.255.0
    access-list Inside_nat0_outbound extended permit ip any 192.168.1.224 255.255.255.240
    access-list Outside_cryptomap_60 extended permit ip 192.168.1.0 255.255.255.0 192.168.2.0 255.255.255.0
    access-list Outside_cryptomap_60 extended permit icmp 192.168.1.0 255.255.255.0 192.168.2.0 255.255.255.0
    access-list Outside_access_in extended permit tcp any host 217.75.8.201 eq smtp
    access-list Outside_access_in extended permit tcp any host 217.75.8.201 eq pop3
    access-list Outside_access_in remark Allow webmail access
    access-list Outside_access_in extended permit tcp any host 217.75.8.201 eq 2000 inactive
    access-list Outside_access_in extended permit icmp any any
    access-list Outside_access_in remark Allow Hansa Live access
    access-list Outside_access_in extended permit tcp any host 217.75.8.204 eq 1200
    access-list Outside_access_in remark Monitcom
    access-list Outside_access_in extended permit tcp host 87.232.117.66 host 217.75.8.205 eq 5900
    access-list Outside_access_in extended permit udp any host 217.75.8.205 eq 3924
    access-list Outside_access_in remark ESS Access
    access-list Outside_access_in extended permit tcp host 196.36.153.251 any eq 220
    access-list Outside_access_in remark ESS Access
    access-list Outside_access_in extended permit tcp host 196.36.153.251 any eq 230
    access-list Outside_access_in remark ESS Access
    access-list Outside_access_in extended permit tcp host 196.36.153.251 any eq 240
    access-list Outside_access_in remark ESS Access
    access-list Outside_access_in extended permit tcp host 196.36.153.251 any eq 250
    access-list Outside_access_in remark ESS Access
    access-list Outside_access_in extended permit tcp host 196.36.153.251 any eq 260
    access-list Outside_access_in remark ESS Access
    access-list Outside_access_in extended permit tcp host 196.36.153.251 any eq 1433
    access-list Outside_access_in remark Allow TMS Web Access
    access-list Outside_access_in extended permit tcp any host 217.75.8.206 eq www
    access-list Outside_access_in extended permit tcp any host 217.75.8.201 eq https
    access-list Outside_access_in extended permit tcp any host 217.75.8.201 eq www
    access-list Outside_access_in extended permit udp any any eq 4500 inactive
    access-list Outside_access_in extended permit udp any any eq isakmp inactive
    access-list Outside_access_in remark Allow webmail access
    access-list Outside_access_in remark Allow Hansa Live access
    access-list Outside_access_in remark Monitcom
    access-list Outside_access_in remark ESS Access
    access-list Outside_access_in remark ESS Access
    access-list Outside_access_in remark ESS Access
    access-list Outside_access_in remark ESS Access
    access-list Outside_access_in remark ESS Access
    access-list Outside_access_in remark ESS Access
    access-list Outside_access_in remark Allow TMS Web Access
    access-list Outside_access_in remark Allow webmail access
    access-list Outside_access_in remark Allow Hansa Live access
    access-list Outside_access_in remark Monitcom
    access-list Outside_access_in remark ESS Access
    access-list Outside_access_in remark ESS Access
    access-list Outside_access_in remark ESS Access
    access-list Outside_access_in remark ESS Access
    access-list Outside_access_in remark ESS Access
    access-list Outside_access_in remark ESS Access
    access-list Outside_access_in remark Allow TMS Web Access
    access-list Outside_access_in remark Allow webmail access
    access-list Outside_access_in remark Allow Hansa Live access
    access-list Outside_access_in remark Monitcom
    access-list Outside_access_in remark ESS Access
    access-list Outside_access_in remark ESS Access
    access-list Outside_access_in remark ESS Access
    access-list Outside_access_in remark ESS Access
    access-list Outside_access_in remark ESS Access
    access-list Outside_access_in remark ESS Access
    access-list Outside_access_in remark Allow TMS Web Access
    access-list Inside_access_in extended permit ip any any
    access-list Inside_access_in extended permit icmp any any
    access-list RemoteVPN_splitTunnelAcl standard permit any
    access-list Outside_1_cryptomap extended permit ip 192.168.1.0 255.255.255.0 10.1.2.0 255.255.255.0
    access-list Outside_cryptomap_dyn_20 extended permit ip any 192.168.1.224 255.255.255.240
    pager lines 24
    logging enable
    logging asdm warnings
    mtu Outside 1500
    mtu Inside 1500
    mtu management 1500
    ip local pool VPNPool 192.168.1.230-192.168.1.240 mask 255.255.255.0
    ip verify reverse-path interface Outside
    icmp unreachable rate-limit 1 burst-size 1
    icmp permit any Outside
    icmp permit any Inside
    asdm location 192.168.1.208 255.255.255.252 Inside
    asdm location 192.168.1.103 255.255.255.255 Inside
    asdm location 192.168.1.6 255.255.255.255 Inside
    asdm location 192.168.1.7 255.255.255.255 Inside
    asdm location 192.168.1.9 255.255.255.255 Inside
    no asdm history enable
    arp timeout 14400
    nat (Inside,any) source static obj-192.168.1.0-02 obj-192.168.1.0-02 destination static obj-192.168.2.0-02 obj-192.168.2.0-02 unidirectional
    nat (Inside,any) source static obj-192.168.1.0-02 obj-192.168.1.0-02 destination static obj-10.1.2.0-02 obj-10.1.2.0-02 unidirectional
    nat (Inside,any) source static any any destination static obj-192.168.1.224-02 obj-192.168.1.224-02 unidirectional
    nat (Inside,Outside) source static NETWORK_OBJ_192.168.1.0_24 NETWORK_OBJ_192.168.1.0_24 destination static NETWORK_OBJ_10.1.2.0_24 NETWORK_OBJ_10.1.2.0_24
    object network obj-192.168.1.2-04
    nat (Outside,Inside) static 217.75.8.204
    object network obj-192.168.1.7-04
    nat (Outside,Inside) static 217.75.8.206
    object network obj-192.168.1.0-02
    nat (Inside,Outside) dynamic interface
    object network obj-192.168.1.9-02
    nat (Inside,Outside) static 217.75.8.201
    object network obj-192.168.1.2-05
    nat (Inside,Outside) static 217.75.8.204
    object network obj-192.168.1.103-02
    nat (Inside,Outside) static 217.75.8.205
    object network obj-192.168.1.7-05
    nat (Inside,Outside) static 217.75.8.206
    access-group Outside_access_in in interface Outside
    access-group Inside_access_in in interface Inside
    route Outside 0.0.0.0 0.0.0.0 217.75.8.198 1
    timeout xlate 3:00:00
    timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
    timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
    timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
    timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
    timeout tcp-proxy-reassembly 0:01:00
    dynamic-access-policy-record DfltAccessPolicy
    aaa-server DellServerAAA protocol radius
    aaa-server DellServerAAA (Inside) host 192.168.1.4
    key test
    http server enable
    http 62.17.29.2 255.255.255.255 Outside
    http 82.141.224.155 255.255.255.255 Outside
    http 63.218.54.8 255.255.255.252 Outside
    http 213.79.44.213 255.255.255.255 Outside
    http 192.168.1.0 255.255.255.0 Inside
    http 10.1.1.0 255.255.255.0 management
    no snmp-server location
    no snmp-server contact
    snmp-server enable traps snmp authentication linkup linkdown coldstart
    sysopt connection timewait
    crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
    crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
    crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
    crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
    crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
    crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
    crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
    crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac
    crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac
    crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
    crypto ipsec security-association lifetime seconds 28800
    crypto ipsec security-association lifetime kilobytes 4608000
    crypto ipsec df-bit clear-df Outside
    crypto ipsec df-bit clear-df Inside
    crypto dynamic-map Outside_dyn_map 20 match address Outside_cryptomap_dyn_20
    crypto map Outside_map 1 match address Outside_1_cryptomap
    crypto map Outside_map 1 set peer 89.127.172.29
    crypto map Outside_map 1 set transform-set ESP-3DES-SHA
    crypto map Outside_map 60 match address Outside_cryptomap_60
    crypto map Outside_map 60 set peer 89.105.114.98
    crypto map Outside_map 60 set transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5
    crypto map Outside_map 65535 ipsec-isakmp dynamic Outside_dyn_map
    crypto map Outside_map interface Outside
    crypto isakmp identity key-id nattingreallymatters
    crypto isakmp enable Outside
    crypto isakmp enable Inside
    crypto isakmp policy 10
    authentication crack
    encryption aes-256
    hash sha
    group 2
    lifetime 86400
    crypto isakmp policy 20
    authentication rsa-sig
    encryption aes-256
    hash sha
    group 2
    lifetime 86400
    crypto isakmp policy 30
    authentication pre-share
    encryption aes-256
    hash sha
    group 2
    lifetime 86400
    crypto isakmp policy 40
    authentication crack
    encryption aes-192
    hash sha
    group 2
    lifetime 86400
    crypto isakmp policy 50
    authentication rsa-sig
    encryption aes-192
    hash sha
    group 2
    lifetime 86400
    crypto isakmp policy 60
    authentication pre-share
    encryption aes-192
    hash sha
    group 2
    lifetime 86400
    crypto isakmp policy 70
    authentication crack
    encryption aes
    hash sha
    group 2
    lifetime 86400
    crypto isakmp policy 80
    authentication rsa-sig
    encryption aes
    hash sha
    group 2
    lifetime 86400
    crypto isakmp policy 90
    authentication pre-share
    encryption aes
    hash sha
    group 2
    lifetime 86400
    crypto isakmp policy 100
    authentication crack
    encryption 3des
    hash sha
    group 2
    lifetime 86400
    crypto isakmp policy 110
    authentication rsa-sig
    encryption 3des
    hash sha
    group 2
    lifetime 86400
    crypto isakmp policy 120
    authentication pre-share
    encryption 3des
    hash sha
    group 2
    lifetime 86400
    crypto isakmp policy 130
    authentication crack
    encryption des
    hash sha
    group 2
    lifetime 86400
    crypto isakmp policy 140
    authentication rsa-sig
    encryption des
    hash sha
    group 2
    lifetime 86400
    crypto isakmp policy 150
    authentication pre-share
    encryption des
    hash sha
    group 2
    lifetime 86400
    no vpn-addr-assign aaa
    no vpn-addr-assign dhcp
    telnet 192.168.1.0 255.255.255.0 Inside
    telnet timeout 5
    ssh 82.141.224.155 255.255.255.255 Outside
    ssh 62.17.29.2 255.255.255.255 Outside
    ssh 213.79.44.213 255.255.255.255 Outside
    ssh 192.168.1.0 255.255.255.0 Inside
    ssh timeout 5
    console timeout 0
    management-access Inside
    threat-detection basic-threat
    threat-detection statistics access-list
    no threat-detection statistics tcp-intercept
    webvpn
    group-policy RemoteVPN internal
    group-policy RemoteVPN attributes
    wins-server value 192.168.1.31
    dns-server value 192.168.1.31
    default-domain value freefoam.ie
    username freefoam password JLYaVf7FqRM2LH0e encrypted
    username cork password qbK2Hqt1H5ttJzPD encrypted
    tunnel-group 193.114.70.130 type ipsec-l2l
    tunnel-group 193.114.70.130 ipsec-attributes
    pre-shared-key ******
    tunnel-group 89.127.172.29 type ipsec-l2l
    tunnel-group 89.127.172.29 ipsec-attributes
    pre-shared-key ******
    tunnel-group 89.105.114.98 type ipsec-l2l
    tunnel-group 89.105.114.98 ipsec-attributes
    pre-shared-key *****
    tunnel-group RemoteVPN type remote-access
    tunnel-group RemoteVPN general-attributes
    address-pool VPNPool
    authentication-server-group DellServerAAA
    default-group-policy RemoteVPN
    class-map inspection_default
    match default-inspection-traffic
    policy-map global_policy
    class inspection_default
      inspect h323 h225
      inspect h323 ras
      inspect ip-options
    service-policy global_policy global
    prompt hostname context
    call-home
    profile CiscoTAC-1
      no active
      destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService
      destination address email [email protected]
      destination transport-method http
      subscribe-to-alert-group diagnostic
      subscribe-to-alert-group environment
      subscribe-to-alert-group inventory periodic monthly
      subscribe-to-alert-group configuration periodic monthly
      subscribe-to-alert-group telemetry periodic daily
    Cryptochecksum:0dc16fe893bd4bba6fdf6b7eed93e553

    Hi,
    Many thanks for your reply.
    Finally got access to implement your suggestions.
    Initially none of the VPN's were up.
    After making the change the two VPN's came up.
    However only data via the first VPN is possible.
    Accessing resources on the 10.1.2.0 network is still not possible.
    Attached is the latest config, any input is greatly appreciated;
    hostname ciscoasa
    domain-name default.domain.invalid
    enable password NvZgxFP5WhDo0hQl encrypted
    passwd FNeDAwBbhVaOtVAu encrypted
    names
    dns-guard
    interface Ethernet0/0
    nameif Outside
    security-level 0
    ip address 217.75.8.203 255.255.255.248
    interface Ethernet0/1
    nameif Inside
    security-level 100
    ip address 192.168.1.254 255.255.255.0
    interface Ethernet0/2
    shutdown
    no nameif
    no security-level
    no ip address
    interface Ethernet0/3
    shutdown
    no nameif
    no security-level
    no ip address
    interface Management0/0
    nameif management
    security-level 100
    ip address 10.1.1.1 255.255.255.0
    management-only
    boot system disk0:/asa832-k8.bin
    ftp mode passive
    clock timezone GMT/IST 0
    clock summer-time GMT/IDT recurring last Sun Mar 1:00 last Sun Oct 2:00
    dns domain-lookup Inside
    dns server-group DefaultDNS
    domain-name default.domain.invalid
    object network obj-192.168.1.2-04
    host 192.168.1.2
    object network obj-192.168.1.7-04
    host 192.168.1.7
    object network obj-192.168.1.0-02
    subnet 192.168.1.0 255.255.255.0
    object network obj-192.168.2.0-02
    subnet 192.168.2.0 255.255.255.0
    object network obj-10.1.2.0-02
    subnet 10.1.2.0 255.255.255.0
    object network obj-192.168.1.224-02
    subnet 192.168.1.224 255.255.255.240
    object network obj-192.168.1.9-02
    host 192.168.1.9
    object network obj-192.168.1.2-05
    host 192.168.1.2
    object network obj-192.168.1.103-02
    host 192.168.1.103
    object network obj-192.168.1.7-05
    host 192.168.1.7
    object network NETWORK_OBJ_10.1.2.0_24
    subnet 10.1.2.0 255.255.255.0
    object network NETWORK_OBJ_192.168.1.0_24
    subnet 192.168.1.0 255.255.255.0
    object-group network obj-192.168.1.2-02
    object-group network obj-192.168.1.7-02
    object-group network obj-192.168.1.0-01
    object-group network obj-192.168.2.0-01
    object-group network obj-10.1.2.0-01
    object-group network obj-192.168.1.224-01
    object-group network obj-192.168.1.9-01
    object-group network obj-192.168.1.2-03
    object-group network obj-192.168.1.103-01
    object-group network obj-192.168.1.7-03
    object-group network obj-192.168.1.2
    object-group network obj-192.168.1.7
    object-group network obj-192.168.1.0
    object-group network obj-192.168.2.0
    object-group network obj-10.1.2.0
    object-group network obj-192.168.1.224
    object-group network obj-192.168.1.9
    object-group network obj-192.168.1.2-01
    object-group network obj-192.168.1.103
    object-group network obj-192.168.1.7-01
    object-group network obj_any
    object-group network obj-0.0.0.0
    object-group network obj_any-01
    object-group service MonitcomUDP udp
    port-object range 3924 3924
    access-list Inside_nat0_inbound extended permit ip 192.168.1.0 255.255.255.0 192.168.2.0 255.255.255.0
    access-list Inside_nat0_inbound extended permit ip 192.168.1.0 255.255.255.0 10.1.2.0 255.255.255.0
    access-list Inside_nat0_outbound extended permit ip 192.168.1.0 255.255.255.0 192.168.2.0 255.255.255.0
    access-list Inside_nat0_outbound extended permit ip 192.168.1.0 255.255.255.0 10.1.2.0 255.255.255.0
    access-list Inside_nat0_outbound extended permit ip any 192.168.1.224 255.255.255.240
    access-list Outside_cryptomap_60 extended permit ip 192.168.1.0 255.255.255.0 192.168.2.0 255.255.255.0
    access-list Outside_cryptomap_60 extended permit icmp 192.168.1.0 255.255.255.0 192.168.2.0 255.255.255.0
    access-list Outside_access_in extended permit tcp any host 217.75.8.201 eq smtp
    access-list Outside_access_in extended permit tcp any host 217.75.8.201 eq pop3
    access-list Outside_access_in remark Allow webmail access
    access-list Outside_access_in extended permit tcp any host 217.75.8.201 eq 2000 inactive
    access-list Outside_access_in extended permit icmp any any
    access-list Outside_access_in remark Allow Hansa Live access
    access-list Outside_access_in extended permit tcp any host 217.75.8.204 eq 1200
    access-list Outside_access_in remark Monitcom
    access-list Outside_access_in extended permit tcp host 87.232.117.66 host 217.75.8.205 eq 5900
    access-list Outside_access_in extended permit udp any host 217.75.8.205 eq 3924
    access-list Outside_access_in remark ESS Access
    access-list Outside_access_in extended permit tcp host 196.36.153.251 any eq 220
    access-list Outside_access_in remark ESS Access
    access-list Outside_access_in extended permit tcp host 196.36.153.251 any eq 230
    access-list Outside_access_in remark ESS Access
    access-list Outside_access_in extended permit tcp host 196.36.153.251 any eq 240
    access-list Outside_access_in remark ESS Access
    access-list Outside_access_in extended permit tcp host 196.36.153.251 any eq 250
    access-list Outside_access_in remark ESS Access
    access-list Outside_access_in extended permit tcp host 196.36.153.251 any eq 260
    access-list Outside_access_in remark ESS Access
    access-list Outside_access_in extended permit tcp host 196.36.153.251 any eq 1433
    access-list Outside_access_in remark Allow TMS Web Access
    access-list Outside_access_in extended permit tcp any host 217.75.8.206 eq www
    access-list Outside_access_in extended permit tcp any host 217.75.8.201 eq https
    access-list Outside_access_in extended permit tcp any host 217.75.8.201 eq www
    access-list Outside_access_in extended permit udp any any eq 4500 inactive
    access-list Outside_access_in extended permit udp any any eq isakmp inactive
    access-list Outside_access_in remark Allow webmail access
    access-list Outside_access_in remark Allow Hansa Live access
    access-list Outside_access_in remark Monitcom
    access-list Outside_access_in remark ESS Access
    access-list Outside_access_in remark ESS Access
    access-list Outside_access_in remark ESS Access
    access-list Outside_access_in remark ESS Access
    access-list Outside_access_in remark ESS Access
    access-list Outside_access_in remark ESS Access
    access-list Outside_access_in remark Allow TMS Web Access
    access-list Outside_access_in remark Allow webmail access
    access-list Outside_access_in remark Allow Hansa Live access
    access-list Outside_access_in remark Monitcom
    access-list Outside_access_in remark ESS Access
    access-list Outside_access_in remark ESS Access
    access-list Outside_access_in remark ESS Access
    access-list Outside_access_in remark ESS Access
    access-list Outside_access_in remark ESS Access
    access-list Outside_access_in remark ESS Access
    access-list Outside_access_in remark Allow TMS Web Access
    access-list Outside_access_in remark Allow webmail access
    access-list Outside_access_in remark Allow Hansa Live access
    access-list Outside_access_in remark Monitcom
    access-list Outside_access_in remark ESS Access
    access-list Outside_access_in remark ESS Access
    access-list Outside_access_in remark ESS Access
    access-list Outside_access_in remark ESS Access
    access-list Outside_access_in remark ESS Access
    access-list Outside_access_in remark ESS Access
    access-list Outside_access_in remark Allow TMS Web Access
    access-list Outside_access_in remark Allow webmail access
    access-list Outside_access_in remark Allow Hansa Live access
    access-list Outside_access_in remark Monitcom
    access-list Outside_access_in remark ESS Access
    access-list Outside_access_in remark ESS Access
    access-list Outside_access_in remark ESS Access
    access-list Outside_access_in remark ESS Access
    access-list Outside_access_in remark ESS Access
    access-list Outside_access_in remark ESS Access
    access-list Outside_access_in remark Allow TMS Web Access
    access-list Outside_access_in remark Allow webmail access
    access-list Outside_access_in remark Allow Hansa Live access
    access-list Outside_access_in remark Monitcom
    access-list Outside_access_in remark ESS Access
    access-list Outside_access_in remark ESS Access
    access-list Outside_access_in remark ESS Access
    access-list Outside_access_in remark ESS Access
    access-list Outside_access_in remark ESS Access
    access-list Outside_access_in remark ESS Access
    access-list Outside_access_in remark Allow TMS Web Access
    access-list Outside_access_in remark Allow webmail access
    access-list Outside_access_in remark Allow Hansa Live access
    access-list Outside_access_in remark Monitcom
    access-list Outside_access_in remark ESS Access
    access-list Outside_access_in remark ESS Access
    access-list Outside_access_in remark ESS Access
    access-list Outside_access_in remark ESS Access
    access-list Outside_access_in remark ESS Access
    access-list Outside_access_in remark ESS Access
    access-list Outside_access_in remark Allow TMS Web Access
    access-list Outside_access_in remark Allow webmail access
    access-list Outside_access_in remark Allow Hansa Live access
    access-list Outside_access_in remark Monitcom
    access-list Outside_access_in remark ESS Access
    access-list Outside_access_in remark ESS Access
    access-list Outside_access_in remark ESS Access
    access-list Outside_access_in remark ESS Access
    access-list Outside_access_in remark ESS Access
    access-list Outside_access_in remark ESS Access
    access-list Outside_access_in remark Allow TMS Web Access
    access-list Inside_access_in extended permit ip any any
    access-list Inside_access_in extended permit icmp any any
    access-list RemoteVPN_splitTunnelAcl standard permit any
    access-list Outside_1_cryptomap extended permit ip 192.168.1.0 255.255.255.0 10.1.2.0 255.255.255.0
    access-list Outside_cryptomap_dyn_20 extended permit ip any 192.168.1.224 255.255.255.240
    access-list global_access extended permit ip any any
    access-list Outside_cryptomap_80_3 extended permit ip 192.168.1.0 255.255.255.0 10.1.2.0 255.255.255.0
    access-list Split-tunnel standard permit 192.168.1.0 255.255.255.0
    pager lines 24
    logging enable
    logging asdm warnings
    mtu Outside 1500
    mtu Inside 1500
    mtu management 1500
    ip local pool VPNPool 192.168.1.230-192.168.1.240 mask 255.255.255.0
    ip verify reverse-path interface Outside
    icmp unreachable rate-limit 1 burst-size 1
    icmp permit any Outside
    icmp permit any Inside
    asdm image disk0:/asdm-647.bin
    asdm location 192.168.1.208 255.255.255.252 Inside
    asdm location 192.168.1.103 255.255.255.255 Inside
    asdm location 192.168.1.6 255.255.255.255 Inside
    asdm location 192.168.1.7 255.255.255.255 Inside
    asdm location 192.168.1.9 255.255.255.255 Inside
    no asdm history enable
    arp timeout 14400
    nat (Inside,any) source static obj-192.168.1.0-02 obj-192.168.1.0-02 destination static obj-192.168.2.0-02 obj-192.168.2.0-02
    nat (Inside,any) source static obj-192.168.1.0-02 obj-192.168.1.0-02 destination static obj-10.1.2.0-02 obj-10.1.2.0-02
    nat (Inside,any) source static any any destination static obj-192.168.1.224-02 obj-192.168.1.224-02 unidirectional
    nat (Inside,Outside) source static NETWORK_OBJ_192.168.1.0_24 NETWORK_OBJ_192.168.1.0_24 destination static NETWORK_OBJ_10.1.2.0_24 NETWORK_OBJ_10.1.2.0_24
    object network obj-192.168.1.2-04
    nat (Outside,Inside) static 217.75.8.204
    object network obj-192.168.1.7-04
    nat (Outside,Inside) static 217.75.8.206
    object network obj-192.168.1.0-02
    nat (Inside,Outside) dynamic interface
    object network obj-192.168.1.9-02
    nat (Inside,Outside) static 217.75.8.201
    object network obj-192.168.1.2-05
    nat (Inside,Outside) static 217.75.8.204
    object network obj-192.168.1.103-02
    nat (Inside,Outside) static 217.75.8.205
    object network obj-192.168.1.7-05
    nat (Inside,Outside) static 217.75.8.206
    nat (Inside,Outside) after-auto source static NETWORK_OBJ_192.168.1.0_24 NETWORK_OBJ_192.168.1.0_24 destination static NETWORK_OBJ_192.168.1.0_24 NETWORK_OBJ_192.168.1.0_24
    access-group Outside_access_in in interface Outside
    access-group Inside_access_in in interface Inside
    access-group global_access global
    route Outside 0.0.0.0 0.0.0.0 217.75.8.198 1
    timeout xlate 3:00:00
    timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
    timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
    timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
    timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
    timeout tcp-proxy-reassembly 0:01:00
    dynamic-access-policy-record DfltAccessPolicy
    aaa-server DellServerAAA protocol radius
    aaa-server DellServerAAA (Inside) host 192.168.1.4
    key test
    http server enable
    http 62.17.29.2 255.255.255.255 Outside
    http 82.141.224.155 255.255.255.255 Outside
    http 63.218.54.8 255.255.255.252 Outside
    http 213.79.44.213 255.255.255.255 Outside
    http 192.168.1.0 255.255.255.0 Inside
    http 10.1.1.0 255.255.255.0 management
    no snmp-server location
    no snmp-server contact
    snmp-server enable traps snmp authentication linkup linkdown coldstart
    sysopt connection timewait
    crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
    crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
    crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
    crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
    crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
    crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac
    crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
    crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
    crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
    crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac
    crypto ipsec security-association lifetime seconds 28800
    crypto ipsec security-association lifetime kilobytes 4608000
    crypto ipsec df-bit clear-df Outside
    crypto ipsec df-bit clear-df Inside
    crypto dynamic-map Outside_dyn_map 20 match address Outside_cryptomap_dyn_20
    crypto dynamic-map Outside_dyn_map 20 set transform-set ESP-3DES-SHA
    crypto map Outside_map 1 match address Outside_1_cryptomap
    crypto map Outside_map 1 set peer 89.127.172.29
    crypto map Outside_map 1 set transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-DES-SHA ESP-3DES-MD5 ESP-AES-256-MD5 ESP-3DES-SHA ESP-DES-MD5
    crypto map Outside_map 60 match address Outside_cryptomap_60
    crypto map Outside_map 60 set peer 89.105.114.98
    crypto map Outside_map 60 set transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5
    crypto map Outside_map 65535 ipsec-isakmp dynamic Outside_dyn_map
    crypto map Outside_map interface Outside
    crypto isakmp identity key-id nattingreallymatters
    crypto isakmp enable Outside
    crypto isakmp enable Inside
    crypto isakmp policy 10
    authentication pre-share
    encryption aes-256
    hash md5
    group 5
    lifetime 86400
    crypto isakmp policy 20
    authentication rsa-sig
    encryption aes-256
    hash sha
    group 2
    lifetime 86400
    crypto isakmp policy 30
    authentication pre-share
    encryption 3des
    hash sha
    group 2
    lifetime 86400
    crypto isakmp policy 40
    authentication crack
    encryption aes-192
    hash sha
    group 2
    lifetime 86400
    crypto isakmp policy 50
    authentication pre-share
    encryption 3des
    hash md5
    group 2
    lifetime 86400
    crypto isakmp policy 60
    authentication pre-share
    encryption aes-192
    hash sha
    group 2
    lifetime 86400
    crypto isakmp policy 70
    authentication crack
    encryption aes
    hash sha
    group 2
    lifetime 86400
    crypto isakmp policy 80
    authentication rsa-sig
    encryption aes
    hash sha
    group 2
    lifetime 86400
    crypto isakmp policy 90
    authentication pre-share
    encryption aes
    hash sha
    group 2
    lifetime 86400
    crypto isakmp policy 100
    authentication crack
    encryption 3des
    hash sha
    group 2
    lifetime 86400
    crypto isakmp policy 110
    authentication rsa-sig
    encryption 3des
    hash sha
    group 2
    lifetime 86400
    crypto isakmp policy 130
    authentication crack
    encryption des
    hash sha
    group 2
    lifetime 86400
    crypto isakmp policy 140
    authentication rsa-sig
    encryption des
    hash sha
    group 2
    lifetime 86400
    crypto isakmp policy 150
    authentication pre-share
    encryption des
    hash sha
    group 2
    lifetime 86400
    no vpn-addr-assign aaa
    no vpn-addr-assign dhcp
    telnet 192.168.1.0 255.255.255.0 Inside
    telnet timeout 5
    ssh 82.141.224.155 255.255.255.255 Outside
    ssh 62.17.29.2 255.255.255.255 Outside
    ssh 213.79.44.213 255.255.255.255 Outside
    ssh 192.168.1.0 255.255.255.0 Inside
    ssh timeout 5
    console timeout 0
    management-access Inside
    threat-detection basic-threat
    threat-detection statistics access-list
    no threat-detection statistics tcp-intercept
    webvpn
    enable Outside
    anyconnect-essentials
    svc image disk0:/anyconnect-dart-win-2.5.3055-k9.pkg 1
    svc image disk0:/anyconnect-macosx-powerpc-2.5.3055-k9.pkg 2
    svc enable
    tunnel-group-list enable
    group-policy RemoteVPN internal
    group-policy RemoteVPN attributes
    wins-server value 192.168.1.31
    dns-server value 192.168.1.31
    vpn-tunnel-protocol IPSec svc
    split-tunnel-policy tunnelspecified
    split-tunnel-network-list value Split-tunnel
    default-domain value freefoam.ie
    username freefoam password JLYaVf7FqRM2LH0e encrypted
    username cisco password DfO7NBd5PZ1b0kZ1 encrypted privilege 15
    username cork password qbK2Hqt1H5ttJzPD encrypted
    tunnel-group 193.114.70.130 type ipsec-l2l
    tunnel-group 193.114.70.130 ipsec-attributes
    pre-shared-key ************
    tunnel-group 89.127.172.29 type ipsec-l2l
    tunnel-group 89.127.172.29 ipsec-attributes
    pre-shared-key ************
    tunnel-group 89.105.114.98 type ipsec-l2l
    tunnel-group 89.105.114.98 ipsec-attributes
    pre-shared-key ************
    tunnel-group RemoteVPN type remote-access
    tunnel-group RemoteVPN general-attributes
    address-pool VPNPool
    authentication-server-group DellServerAAA
    default-group-policy RemoteVPN
    tunnel-group RemoteVPN webvpn-attributes
    group-alias Anyconnect enable
    tunnel-group RemoteVPN ipsec-attributes
    pre-shared-key c0nnect10nParameter$
    class-map inspection_default
    match default-inspection-traffic
    policy-map global_policy
    class inspection_default
      inspect h323 h225
      inspect h323 ras
      inspect ip-options
    service-policy global_policy global
    prompt hostname context
    call-home
    profile CiscoTAC-1
      no active
      destination address http
    https://tools.cisco.com/its/service/oddce/services/DDCEService
      destination address email
    [email protected]
      destination transport-method http
      subscribe-to-alert-group diagnostic
      subscribe-to-alert-group environment
      subscribe-to-alert-group inventory periodic monthly
      subscribe-to-alert-group configuration periodic monthly
      subscribe-to-alert-group telemetry periodic daily
    Cryptochecksum:fae6b7bc25fcf39daffbcdc6b91c9d8e

  • I am trying to install, but the install wizard insists on installing on a nonexistant D:/ drive, and when i try to change it, it gives me error 2330.  any ideas?

    I am trying to run iTunes on a PC with Windows 8.1, but the setup wizard tells me there is no space on the D:/ drive, which makes sense, since my D:/ drive is a CD-ROM.  When it gives me the option to save on a different drive, I click it, and it tells me "Error 2330" and shuts down.  Error 2330 simply implies that the drive is incompatible, which makes sense but isn't helpful.  I even tried disconnecting the CD-ROM but that didn't change anything. 
    It is very odd that I have had iTunes on this computer for over seven months, and this problem didn't begin until after I attempted to install the latest update.  It failed to install the update, and from then on I couldn't open iTunes at all.  Has anyone else seen this issue or know what I can do?

    I am trying to run iTunes on a PC with Windows 8.1, but the setup wizard tells me there is no space on the D:/ drive, which makes sense, since my D:/ drive is a CD-ROM.
    Even though you're getting a slightly different error message, try the following user tip:
    "Invalid drive X:\" install errors

  • Dunning wizard

    Hi all,
    I'm starting to use Dunning Wizard and I'm having a problem in step 5 (Recomendation Report).
    In Dunning Term and in Dunning Letter Method i want "One letter per BP". Also I have selected "Apply Letter Template by Highest Level ". In Dunning Levels, I have 3 Letter templates.
    I'm testing only with two costumers.
    When I reach step 5 I have costumer1 with 3 Invoices and Costumer2 with 1 invoice.
    I want to use Letter number 2 in both costumers. In Costumer1 I enter 2 Print Preview and no problem. Letter number 2 is printed.
    In costumer2 i also enter 2 but in Print Preview letter number 1 is printed. I want letter number 2.
    If the costumer has more than 1 document what I enter in the Level field is what I get in Print Preview. If the costumer has only 1 document what I enter in Level field is ignored and always letter number 1 is printed.
    I think that it's not correct.
    Does anybody now some workaround?
    Best Regards,
    Augusto Sila

    Hi Gordon,
    Thank you for your answer.
    I don't understand this logic.
    In costumer1 I have 3 Invoices and the highest level is 1. If I change to 2, this indicates that I want to print the Letter number 2, SAP B1 changes this to the Highest Level and prints letter number 2.
    In costumer2 I also want to print letter number 2 but SAP B1 doesn't let me because I only have 1 document. I think this isn't correct.
    I want to print letter number 2 for costumer2.
    Regards,
    Augusto Silva

  • Error while adding a attribute to the the Custom view through a wizard

    Hi ,
    I have created a new custom view with value node through wizard  succesfully.
    Now I want to add a new attribute to that node.I am trying to do that by a wizard.
    But i am getting the follwing error " Error during analysis of Source Code" although i have
    commented or removed my all custom code from that view.
    I tried adding the new aattributes in the metthods "IF_BSP_MODEL~INIT " and
    "GET_TABLE_LINE_SAMPLE " manually but that also does not worked.
    Plz help me with this asap.
    Regards,
    Sharad

    Hi Sharad,
                          I hope all your classes are active. In case you want to add a new attribute there are two steps.
    1.Right click on context node and create attribute, it opens a wizard and continue. This will add the field in the context node and generate the getter-setter methods.
    2. In the above two method whcih you mentioned add the new field in the structure of value node. And then create your own getter-setter methods. and activate it. After this you will be able to see the attribute added in the context node.
    By using any of the two approaches you will be able to see teh new field in the configuration.
    Hope this helps.
    Regards,
    Ruby.

  • Js-error while executing Multiple Image Upload wizard

    If i want to save the configured window of Multiple Image Upload with Save to Database wizard i get this js-error: "While executing onClick in MIUploadWSaveWizard.htm, a JavaScript error occured".
    can someone help?
    thanx
    peter

    That again would be more of a question for the Cold Fusion group.
    Try http://forums.adobe.com/community/coldfusion/coldfusion_administration
    Those people will be able to help you out more.
    Brad Lawryk
    Adobe Community Expert, Dreamweaver
    Adobe Usergroup Manager, Northern British Columbia Adobe User Group

  • Rwbld60.exe error while calling a graph wizard from reports 6i.

    Hi,
    I have a latest patch 4f installed on my machine for reports 6i. When i call a graph wizard from my reports i am getting a program error saying "rwbld60.exe has generated errors".
    How do i confirm that my new patch is installed successfully.
    Thanks in adv.
    Shailesh

    I'm getting this also. I thought it was
    due to my use of DATA PARAMETER. I've
    logged TARS on this and have yet to hear
    back from Oracle.
    Maybe if enough of us get the error Oracle
    will give some guidance on this one.

  • Windows Vista - iPod Nano charges, setup wizard will not start

    Help!
    I have a new PC, and it's Windows Vista.
    I have connected my iPod, and it has charged up, but the setup wizard has not come on?
    How do I save music to my iPod? My PC recognises it as an iPOD, and I can drag and drop things into it as though it is a storage device. However, my iPod does not recognise this music or photo's when I turn it on and try to play stuff? There are no instructions in the box. It's brand new from argos! Never had one before, so don't know what to do.
    Please help.
    Curlzy
    (Very fed up lady

    Sorry you are having problems.
    Could it possibly be any security related software that is preventing this ?
    * http://kb.mozillazine.org/Installing_Firefox#Windows
    Make sure that you have an official copy of Firefox. Do a clean install BUT make sure you do not use any offer to remove personal data or you will destroy bookmarks and settings. If you have problems try to give the exact error messages so paste them into your reply of attach screen shots.
    Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox program files and then reinstall Firefox. Please follow these steps:
    '''Note:''' You might want to print these steps or view them in another browser.
    #Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
    #After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
    #Delete the Firefox installation folder, which is located in one of these locations, by default:
    #'''Windows:'''
    #*C:\Program Files\Mozilla Firefox
    #*C:\Program Files (x86)\Mozilla Firefox
    #Now, go ahead and reinstall Firefox:
    ##Double-click the downloaded installation file and go through the steps of the installation wizard.
    ##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
    <b>WARNING:</b> Do not run Firefox's uninstaller or use a third party remover as part of this process, because that could permanently delete your Firefox data, including but not limited to, extensions, cache, cookies, bookmarks, personal settings and saved passwords. <u>These are difficult to recover unless they have been backed up to an external device!</u>
    Lets get Firefox installed then deal with any Java problem.
    * What is it that you need Java for ??
    <br /> see also http://kb.mozillazine.org/JavaScript_is_not_Java

  • Bug in the copy cluster roles wizard - CSV reparse points cannot have names with spaces

    Hi All,
    I have identified a bug in the copy cluster roles wizard in 2012 R2, which is preventing me from migrating my clusters from 2008 R2 & 2012 to 2012 R2.
    The bug surfaces when you attempt to copy a VM role from a 2008 R2 or 2012 cluster that has a CSV reparse point name that contains spaces as follows:
    The role appears to copy across fine, but once you've migrated the CSV and brought it online followed by starting the VM, the VM configuration resource promptly fails along with the VM.
    The issue can be spotted inside the copy cluster roles wizard, where it presents itself by removing all text after the first space in the name to read "C:\ClusterStorage\CSV" rather than "C:\ClusterStorage\CSV
    Test Disk 3" as follows:
    The bug only appears for VMs on CSVs with a reparse point name containing spaces - all other scenarios succeed.
    After searching through the registry on the new cluster, you can clearly see that the VM role hasn't been correctly copied.
    It shows a value called SharedVolumeMappings with the data C:\ClusterStorage\CSV|<guid>|<integer>
    Whereas it should show the data C:\ClusterStorage\CSV Test Disk 3|<guid>|<integer>
    If you modify the data in the SharedVolumeMappings value in both
    0.Cluster\Resources\<VM guid> and Cluster\Resources\<VM guid> keys, the VM will start and work correctly.
    The problem for me is that I have many VMs on many different CSVs all with spaces in the names of the reparse point! Its not feasible for me to go through the registry for every copied VM on every node of the new cluster, as this would take a very long time
    and would be prone to errors that could cause further problems.
    Can anyone provide any help on this? A hotfix for the issue would be great, if anyone from Microsoft is reading :-)
    My deadline to get the VMs migrated to the new cluster is the 21st February, so I would really like to have a solution to the problem before then if at all possible.
    Many thanks in advance,
    Tom

    Hi Subhasish,
    Thanks for the reply, glad that its something that is reproducible!
    Do you have any idea of timescale? Or is it likely that I will have to modify the registry as above to get this working?
    If I am going to have to modify the registry, please can you let me know if the resolution I have tested above is safe and viable? Or are there other settings that I will need to change to make the cluster fully aware of the proper path to the CSVs for its
    VMs?
    Also, is there a known procedure for renaming the reparse point whilst VMs are running on it? This would allow me to negate the issue before copying the roles to the new cluster :-)
    Thanks again,
    Tom

  • PDF Portfolio SDK setup - Navigator project wizard in Flex Builder 4.6 does not show

    Hello, Experts
    I am trying to build PDF Custom Navigator using Adobe PDF Portfolio SDK; however, for some reason, when performing step 3 of installation, Navigator project wizard in Flex Builder  (  4.6 ) would not show;
    The plugins have been extracted to:
    C:\Program Files\Adobe\Adobe Flash Builder 4.6\eclipse\plugins
    The NavigatorSupport folder has been extracted to:
    C:\Program Files\Adobe\Adobe Flash Builder 4.6\eclipse and ( just in case ) to
    C:\Program Files\Adobe\Adobe Flash Builder 4.6\
    any advice would be greatly appreciated
    Best Regards,
    -Alex

    as per Joel's recommendation, used 4.5 instead - that worked just fine

  • You have interrupted the wizard!! (Photoshop CS2)

    Okay, lately I've been having problems installing photoshop after trying to create a user account for myself on this damned computer; a friend has supposedly helped me but we'll never know until I'm able to install the program itself... This is where ya'll come in.
    I am getting the message:
    "The wizard was interrupted before Adobe Photoshop CS2 finished installing..." etc, etc.
    I have rebooted twice and even waited a few hours before trying to install and still, I receive the same message.
    What do?
    WINDOWS 2000
    ADOBE PHOTOSHOP CS2

    HI,
    Photoshop CS2 may not run correctly on a system that doesn't meet the following requirements:
    Photoshop CS2 (purchased as a stand alone product)
    Intel Xeon, Xeon Dual, Centrino, Pentium class III or 4 processor
    Microsoft Windows XP with Service Pack 1 or 2 or Windows 2000 with Service Pack 4
    320 MB of RAM (384 MB recommended) *
    650 MB of available hard-disk space
    1024 x 768 monitor resolution with 16-bit video card
    CD-ROM drive
    Internet or phone connection required for product activation
    Hope This Helps,
    Cheers,
    Maneet Puri,
    LeXolution IT Services

  • Table or view does not exist - Data Dictionary Import Wizard(Data Modeler)

    Hi All,
    In Data Modeler, Data Dictionary Import Wizard, I'm able to connect to database.But while going to the second stage (Select Schema/Database), I'm getting an error "ORA-00942: table or view does not exist".
    I am able to select the table with select * from all_tables and I can open many tables as well.
    Could anyone tell me, whether I'm missing any privilege, that causing this error.
    Thanks in advance for you support.
    Thanks.

    Hi,
    Thanks for your response, sorry for my late reply as I was away from my place.
    Yes, it is showing "Connection established successfully".
    log file as below-
    2012-08-02 10:37:26,471 [main] INFO ApplicationView - Oracle SQL Developer Data Modeler 3.1.1.703
    2012-08-02 10:39:42,889 [AWT-EventQueue-0] ERROR AbstractDBMExtractionWizardImpl - java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
    Pls see oracle version details-
    Oracle Database 11g Enterprise Edition
    11.1.0.6.0
    64bit Production
    Thanks again and waiting for reply.

  • PI 7.11 - Wizard Configuration

    I'm facing an error when trying to run the initial wizard configuration.
    Step 402 of 592: Configures the Integration server in the SLD -> Return
    Error: CIM_ERR_FAILED: Http response code 501: Not Implemented (Unsupported Protocol Version).

    Hi,
    Please check the below discussion forum link.
    http://scn.sap.com/thread/3245319
    http://www.checkupdown.com/status/E501.html
    Regards
    srinivas

Maybe you are looking for

  • Slideshow in QT 7.1.3 in Windows: Frame Rate Fixed at 29.97

    I have my sequentially numbered JPGS, Open Slide Show in File menu, highlight the first JPG, but then the Frame Rate is fixed at 29.97, no opportunity to set to 3 seconds per frame or 10 seconds a frame or anything except 29.97 per second. I have uni

  • Calling a Stored Procedure with output parameters from Query Templates

    This is same problem which Shalaka Khandekar logged earlier. This new thread gives the complete description about our problem. Please go through this problem and suggest us a feasible solution. We encountered a problem while calling a stored procedur

  • Presentation Director shows slideshow on LCD although using extended display

    Hi, I'm using Presentation Directory and set a scheme to have an extended display. When using PowerPoint's slideshow it is shown on the main LCD and I'm unable to show it on the extended display. I've tried several steps e.g. first move the presentat

  • Load Cache and UnLoad Cache Problem

    Hi, I have inserted 150k Rows from TimesTen and it is been replicated successfully from TimesTen to my Oracle DB.I checked no of rows in TimesTen and Oracle ,showing same rows as 150K rows. AT Oracle End Count starts for me is from 2 so 153599 rows i

  • Safari Print tab

    Hey guys. I am able to tab through the print pop up in safari to the "pdf" button and hit space to open the extended menu to save it as a pdf. However, I am only able to do this on some macs. They are all running the same version of safari (i think)