ASA5512-IPS with failover - how do you config IPS for config sync and failover
Hi all,
I have a pair of 5512-X's with IPS. The ASA's are configured for failover with active/standby. Is it possible to configure the 5512-IPS is an active/standby state with configuration synchronisation? I’ve been unable to locate any configuration documentation on this.
Your advice would be appreciated.
Regards,
Chris
There is no active/standby-state or replication as it is on the ASA. Both IPS-modules are configured completely independent. It's your responsibility to keep the two units in sync.
Yes, it's an improvable state and every admin in a small setup without a cetralized management is hoping for new features there.
Don't stop after you've improved your network! Improve the world by lending money to the working poor:
http://www.kiva.org/invitedby/karsteni
Similar Messages
-
How do you grant permission for home sharing and authorizing? My mac did home share, but now says, "The required directory was not found or has a permissions error", when I try to authorize.
OK, I just got off of the phone with Apple and still no joy. They had me try a few things that did not work, then told me to Archive and Install, which did not either. Anyway, thanks for the additional help very note worthy, but still no joy. Also an email to iTunes Support took me here
http://docs.info.apple.com/article.html?artnum=93061
I have a Users/Shared folder but since the files we are talking about are invisible, I can see how it is structured.
And by the way I tried this one
http://discussions.apple.com/message.jspa?messageID=3577004#3577004
and it did not work. However, when I install a fresh copy of Tiger on the external it did authorize the computer and was able to play the downloads. But coping the invisible file to my boot drive was not successful. But , like I said the music did play when I started up from the external. So I guess that may be my only solution, unless someone can tell what the correct directory is and where it for iTunes downloads. -
How do you separate favorites for Phone App and Facetime App?
I was wondering if there was a way to separate the phone favorites from the Facetime favorites.
I find it kind of annoying that I can't just add a Facetime favorite without it appearing in my phone favorites.If you would of read the last line of the description for that app... it says:
"It's without a doubt the best joke you can play on them with your device! For entertainment purpose only and does not provide true device locator functionality."
It's meant to be a joke. You tell your friend your going to track them (while they are standing right in front of you) you punch in their number, and the app appears to hone in on their position. But of course its only using your location. -
How do you transfer photos to external backup and keep the photos in events with event name or with description name. Each time I have tried to transfer them they only transfer with a jpg number so you don't know what photos are what. When you have several thousand photos it is difficult to determined what is what.
Why does iPhoto have the ability to put photos in events and to give them descriptions if it doesn't transfer this info with the photo. I want to back my photos up to an external drive.The simplest way to achieve what you want is to back up the iPhoto Library. That will get everything.
You sem to be exporting from iPhoto to the Finder. The Finder does not have the same organisation capabilities as iPhoto. If you're going to do that you need to understand some of the differences between the two.
Event Name will become Folder Name.
'Description Name' I guess is the Title you give the Photo
Jpeg Number is the File Name assigned by your camera.
So: File -> Export
Set your Kind to Jpeg
Select your preferred Quality
Check the Boxes at 'Titles and Descriptions' and Location Information
Under FIlename select 'Use Title'
Click on Export. In the Next Window choose a New Folder as your export destination and then Name that as you prefer
Regards
TD -
How can i config WLS7 and iPlanet LDAP
How can i config WLS7 and iPlanet LDAP?
failed during initialization. Exception:java.lang.SecurityException: Authenticat
ion for user weblogic denied
java.lang.SecurityException: Authentication for user weblogic denied
at weblogic.security.service.SecurityServiceManager.doBootAuthorization(
SecurityServiceManager.java:978)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityS
erviceManager.java:1116)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:703)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:588)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:276)
at weblogic.Server.main(Server.java:31)
>Yos:
Series of steps to get WLS working with some external LDAP server follows:
I. create a new domain /mydomain
II. start server
III. open WebLogic console in a browser
IV. in left frame, go to
security->realms->myrealm->providers->AuthenticationProviders and click
V. in right frame, click on “Configure a new iPlanet Authenticator”
VI. In the new screen, under General, make sure the Control Flag is set to Required,
select a name for this authenticator, and click Create.
VII. Select iPlanet LDAP tab and fill in values for Host, Port, Principal where
these values reflect the settings for your LDAP server. (Note: the default
principal for an iPlanet LDAP server is uid=admin, ou=Administrators,
ou=TopologyManagement, o=NetscapeRoot). Click Apply.
VIII. Click on Credential: Change. At the new screen, enter the credential
associated with the Principal that you entered in step VII in both boxes. This will
be the password that is used to do a bind to your LDAP server with the principal.
Click Apply.
IX. Select Users tab and make sure these properties accurately reflect the structure
of your LDAP server. Most of the time the only property that needs to be changed is
the User Base DN property, from ou=people,o=example.com to
ou=people,o=myCompany.com. Click Apply.
X. Select Groups tab and make sure these properties accurately reflect the structure
of your LDAP server. Most of the time the only property that needs to be changed is
the Groups Base DN property, from ou=people,o=example.com to
ou=groups,o=myCompany.com. Click Apply.
XI. Now, the boot identity of your server absolutely must be a user that exists on
your LDAP server. You must also have an “Administrators” group on your LDAP server,
and the boot identity must be a user that exists in this “Administrators” group, or
the server will not start. So open your LDAP console (this will be a console that
is specific to the LDAP server you are using) and use the management tools to create
the “Administrators” group and a user that you place in the “Administrators” group
that is the boot identity that you use to start WebLogic.
XII. Make these changes and restart the server.
XIII. You can verify that the LDAP setup is correct by doing a thread dump. You
should see a thread like:
“LDAPConnThread localhost:389" daemon prio=5 tid=0x8d9b308 nid=0x8f8 runnable
[0x9e2f000..0x9e2fdbc]
at java.net.SocketInputStream.socketRead(Native Method)
at java.net.SocketInputStream.read(SocketInputStream.java:86)
at java.io.BufferedInputStream.fill(BufferedInputStream.java:186)
at java.io.BufferedInputStream.read(BufferedInputStream.java:204)
- locked <3281d98> (a java.io.BufferedInputStream)
at netscape.ldap.ber.stream.BERElement.getElement(BERElement.java:101)
at netscape.ldap.LDAPConnThread.run(LDAPConnThread.java:420)
where “localhost:389” is the server name and port of your LDAP
server. This means that your Authenticator has been set up correctly.
XIV. Now you can delete your default authenticator. Open the WebLogic console and
go to security->realms->myrealm->providers->AuthenticationProviders in the left
frame, and click
XV. In the right frame, look for DefaultAuthenticator and click on the trash can to
the far right. Say “Yes” when it asks if you are sure, then click Continue.
XVI. Restart the WebLogic server. If the server boots correctly, you’re done.
Everything is working correctly.
Please note that the "default authenticator" refers to the embedded LDAP server that
ships with WebLogic.
Hope this helps.
Joe Jerry
Yos wrote:
How can i config WLS7 and iPlanet LDAP?
failed during initialization. Exception:java.lang.SecurityException: Authenticat
ion for user weblogic denied
java.lang.SecurityException: Authentication for user weblogic denied
at weblogic.security.service.SecurityServiceManager.doBootAuthorization(
SecurityServiceManager.java:978)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityS
erviceManager.java:1116)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:703)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:588)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:276)
at weblogic.Server.main(Server.java:31)
> -
How do you have 2 Safari windows open and show both pages simultaneously on the monitor
How do you keep open 2 Safari windows and show both pages on monitor?
While in Safari with your first window open go to the File menu and select New Window. That will open the second window on which you can navigate to your second web page. Resize both windows to fit on your display.
-
How can you get audio for books on the kindle
how can you get audio for books on the kindle
The audio inputs on Macs are line level inputs and not mic inputs. You need a mic with a built in preamp (battery powered) or more conveniently a USB mic or bluetooth headset.
-
How do you write UNDO for a text item?? examples? or a REDO??
How do you write UNDO for a text item?? examples? or a REDO??
I created a pop-up menu with CUT, COPY, PASTE, UNDO, CLEAR for my text items.
Using MAGIC menu type works great but there is no MAGIC for UNDO or REDO.....
How do you write UNDO for a text item?? examples? or a REDO??
I have Oracle Forms 6i...
Lets say I highlight all the text in the text item, and start typing over it... then I realize OH NO it is the wrong text field...
Now I want to UNDO the typing and get back to the previous text.
I'd use the initial value that was populate right? How do I access that if that is correct?
Thanks, BillYou can use;
<ITEM> := Get_Item_Property(<ITEM>,DATABASE_VALUE);
Or you will have to write a pre-text-item trigger;
PRE-TEXT-ITEM:
:CTRL.CURRENT_VAL := :<BLOCK>.<ITEM>
MENU (PL/SQL):
:<BLOCK>.<ITEM> := :CTRL.CURRENT_VAL;
You may also want to set the item property back to ITEM_IS_VALID so that item validation does not fire again. -
How do you record addresses for a group in contacts?
How do you record addresses for a group in contacts?
You can't create groups in the contacts app and even if you create a group in icloud.com, the group is useless for email purposes on the iPad. At least I have never been able to get the groups that I create in icloud.com to appears as options for emailing.
There are third party apps that will let you do this.
MailShot
http://solubleapps.com/mailshot/
Group Email with Attachments
http://www.redbits.com/iphone/groupemail/
There is also a workaround where you type all of the email addresses that you want to create a group for in the Notes app separated by a comma,between each address. Copy and paste that one long "email address" in the contacts app and name it whatever you like. Select that as your group when you want to send the group email.
I Haven't done the workaround in ages, so experiment with it first. You may need to leave a space after the comma before you start trying the next email address. -
How do you establish presets for style menu?
How do you establish presets for style menu? Have not seen a tutorial or any support.
1. Create the style you want. (in this example I created a red box with a shadow and a bevel. (example 1)
2. With the object still selected, go to the Graphic Styles menu.
3. Click on the small square icon to create a new style. (example 1, green box)
4. Muse will create a new style called Style in the menu area.
5. Click on the word Style to change the name to something more appropriete, click OK. (example 2)
See examples attached.
1
2 -
How do you take pictures from one library and put in another library??
How do you take pictures from one library and put in another library??
Options:
1. Export from iPhoto A to the Finder, then import to iPhoto B
This gets the photo over, but no versions, no edit history and not all the metadata
2. Use iPhoto Library Manager
This gets everything: versions, edit history and all the metadata.
Regards
TD -
How can you determine a file creation date and know if it's been altered since the creation date
I need to know how to determine a file creation date on an ipad. If someone creates a document/note on an ipad how can you tell when it was created and if it has been altered since?
Unless you are using a third party app that provides that functionality, in iOS the only thing youcan access is the last edit/save date and time, which is fairly evident in the user interface for documents and notes. Some apps that handle MS Office files may provide that, but ican't say first hand.
-
How do you save your photos in iPhoto and be able to find the photos when you are in different programs. When i try to find them I can only find the iPhotos not the individual photos.
Use the media browser. In every open/attach window in tithe lower left hand corner under media ==> photos ==> iPhoto
LN -
How do you install windows XP on macbook and use microsoft access
how do you install windows XP on macbook and use microsoft access?
there are two methods to intall windows on your macbook
1st is through Parellel software
2nd is through Boot camp. -
How do you find out if the transmitter and/or receiver leaves the session ?
So , how do you find out if the transmitter and/or a receiver leaves the session , is there an event when this happens ?
1. There is no list available from your end.
2. You can't actually check. If you suspect a device has been, deauthorize it twice and then authorize it.
(89509) -
IN NUMBERS HOW DO YOU FILL IN FOR A SERIES OF NUMBERS OR DATES
In numbers how do you fill in for a series of numbers or dates without doing it manually
You can enter a value in two cells that establishes a pattern, then select the two cells, then click (and hold) on the little circle at the bottom right corner of the selection and drag to fill as needed.
A Number sequence:
A Date sequence:
Maybe you are looking for
-
Imac with 2 users/Itunes accounts, how can I use both on Apple TV?
We have 2 users on my Mac desktop and each have separate Itunes accounts. How can I get both to work on Apple TV?
-
Hi All, I want one solution, when we were updating a blob coloumn in a table i got the following error: ORA-01691: unable to extend lob segment KM_NOM_PROD.SYS_LOB0000081814C00005$$ by 8192 in tablespace FLOW_1687 can any body please help me with thi
-
How to poll a blob using db adapter, with outer joins condition
Hi All, We are trying to poll tables which contain column types as long and blob, we are using relationships in adapter and kept outer joins. by this we got select distinct t1.document .....etc distinct keyword cannot be used for blobs. is there any
-
How can I lock in numbers for use in a spreadsheet ap?
How can I lock in numbers on my Ipad for use in a spreadsheet?
-
System.loadLibrary works in 1.3.1 but not in 1.2.2
I Have a basic hello world application on Sun Solaris 7 that calls C++ from Java using JNI. The code works well on 1.3.1, but when I recompile it under 1.2.2 and run I get the following exception when I call System.loadLibrary to load my shared libra