ASA5520 standby address. Can I use it an alternative default gateway?

I have a pair of ASA5520s in Active/standby.
I have a bunch of devices on a VLAN that currently use .254 as the gateway address that I want to eventually migrate to .1 as the gateway adress.
If I configure:
ip address 192.168.170.1 255.255.255.0 standby 192.168.170.254
Will devices on the 192.168.170.0/24 subnet be able to use either .1 or .254 as the gateway address?
TIA

Hello,
Yes, they will be able to use the 170.1... The 254 will be just to monitor the state of the secondary device.
So the IP that will always be used will be 170.1
Any other question just let me know.
Regards,
Julio
DO rate all the helpful posts

Similar Messages

  • FaceTime: I have a iPad, iPhone, iMac all on the same apple Id/account. Without changing id/email address can I use FaceTime between any 2 of my devices? It works from iPad to iPhone but not the other way??? I would like talk/see my kids if am away

    FaceTime: I have a iPad, iPhone, iMac all on the same apple Id/account. Without changing id/email address can I use FaceTime between any 2 of my devices? It works from iPad to iPhone but not the other way??? I would like talk/see my kids if am away.
    Hope you can help.
    I have added a new email address but kept my Id, but I get busy when trying from iPhone to iPad as they are clashing. Like find my iPhone app hence trying to keep them all on one account

    IOS: using facetime http://support.apple.com/kb/ht4319
    using an ipad will use the email address since you can't make a phone call.  see the link.
    Your basically calling/emailing yourself that's why your getting a busy signal.

  • How get the RVS4000's DHCP server to assign another IP address other than its own as the default gateway to its DHCP clients?

    Hi,
    I have a RVS4000 router with DHCP enabled and in router mode. 
    The LAN is 192.168.2.x.  The RVS4000 static IP address is 192.168.2.8
    The router is not the RVS4000 and is at 192.168.2.1
    The RVS4000 dhcp is assigning it's clients a default gateway of 192.168.2.8 instead of what I want 192.168.2.1.
    How can I get the RVS4000's DHCP server to assign another IP address other than its own as the default gateway to its DHCP clients?
    Thanks

    Hi Gail, you cannot do this. The router, as the DHCP server will only assign a default gateway of what IP interface the DHCP server runs on. If you have the default IP, the gateway is 192.168.1.1. If you create a second vlan, by default it would be 192.168.2.1.
    There are not configuration options for the built-in DHCP server. If you'd like to expand this functionality, you would need an external dhcp server.
    -Tom
    Please mark answered for helpful posts

  • I have a .mac email address, can i use this as a regular email address?

    I have a .mac email address which i set up for ichat (ages ago) how can i use this as a regular email address in an email client? Is there SMTP/POP details?

    With the introduction of iCloud, Apple has discontinued its "@mac.com" addresses support and has switched to Users using "@me.com" suffixes.  To utilize this you will need to setup an iCloud account with a new Apple ID. And Apple discontinued iChat and has switched to Messages.app, using Apple ID's.
    Hope this helps

  • Can I use Sparrow as a default emailer in iPhoto '11?

    When I try to send the picture in iPhoto '11, the e-mailer choices are confined to the iphoto itself, Mail, and Outlook something.
    I'm using Sparrow as a default Mail client in my Mac.  Can I use it as a defaut e-mailer in iPhoto as well?
    Thanks.

    I also can not get this to work. I have tried a slight change that was recommended on the site below but to no avail.
    https://discussions.apple.com/thread/4153836?start=0&tstart=0
    -- Mail from Sparrow.app instead of Mail.app
    -- Travis Johnson (Edited)
    on mail_images(email_subject, default_address, image_count, new_files, ¬
              new_captions, new_comments, cancel_string)
              try
                        tell application "Sparrow"
                                  activate
                                  set theMessage to make new outgoing message with properties ¬
                                            {subject:email_subject, content:"Check out my sweet pictures!"} ¬
                                  tell theMessage
                                            repeat with image_idx from 1 to image_count
                                                      set this_imagefile to item image_idx of new_files
                                                      set thisimagefilepath to (POSIX file this_imagefile) as string
                                                      make new attachment with properties {file:(thisimagefilepath)}
                                            end repeat
                                            compose
                                  end tell
                        end tell
              on error error_message number error_number
                        log error_message & " " & error_number
                        if the error_number is not -128 then
                                  tell application "Finder"
                                            beep
                                            display dialog error_message buttons {cancel_string} ¬
                                                      default button 1
                                  end tell
                        end if
              end try
    end mail_images

  • How can I use "Make Current Values Default" Programmatically?

    When I use this method in a Invoke node, I get the error code 1000, then i can't use it in run mode?
    How can I modify the default values in a Built aplicattion, and save for the next time I load it?

    Hi,
    I've attached a small demo to show setting up the front panel control. The VI Change Control Value.vi is the one you run. Demo.vi has one control on the front panel whose value is setup by Change Control Value.vi. Just unzip the file, keeping the two VI's in the same folder. You don't need to open the Demo.vi.
    I've used this mechanism onlong with a config file when creating a Virtual Instrument Driver.
    Regards
    Ray.
    Regards
    Ray Farmer
    Attachments:
    demo.zip ‏23 KB

  • I can no longer have a bt internet mail address can still use it to sign in to my apple i/d with it

    I have changed my internet provider can I still its  bt email address as my apple i/d signin address

    You should be able to, but I would advise changing your Apple ID to a functioning non-Apple address that hasn't previously been associated with an Apple ID. Please follow these instructions carefully:
    Firstly, if you have 'Find My iPhone/iPad/iMac' enabled on any of your devices, turn it off.
    Go to http://appleid.apple.com and click 'Manage your Apple ID'. Sign in with the current ID.
    Where it says 'Apple ID and primary email address' and gives your current ID email address, click 'edit'.
    Enter your new address and click 'Save changes'.
    Now you will need to go to each of your devices and sign out in System Preferences (or Settings)>iCloud - 'Sign out' on a Mac, 'Delete this account' on an iOS device (this will not delete the account from the server).
    Then sign back in with your new ID. Your iCloud data will disappear from your devices when you sign out, but reappear when you sign back in.
    I re-iterate: before you start, turn off 'Find My Mac' (or whatever) or you will need the services of Support.

  • Can't use external monitor as default monitor for full-screen settings

    Hey guys,
    I have been trying to get quicktime to let me use my external monitor as the full-screen monitor. Every time I go into full-screen, it reverts back to my MBP screen.
    I cannot seem to find this option even in the fullscreen preferences. Rather than having an option I can click on (like I've seen in pictures), it just says "Movie Size." I have Quicktime Pro 7.5.5 and I am running Leopard.
    Any ideas? I can play most of my movies on VLC, but since I paid for Pro it would be nice if I can get it to work on my external monitor.

    I have to say, I am in exactly the same place ppshr150 is. I have checked both Quicktime and Quicktime Player preferences and the option to choose a default screen for full-screen presentation of movies does not exist.
    I can drag movies over to the second monitor and then press Command F and they will play there but from a presentation perspective, this is rather unprofessional.
    It surprises me that Apple does not have this option. Or is it a bug they haven't/won't fix?

  • JPA - How can I use the table's default Date types? e.g. CURRENT_TIME

    Once again, can't find an answer anwhere.
    I would like to know if/how one can use the default date/time/datetime types as declared for the target table when attempting to persist an entity having these fields set as null.
    create table item
         item_id INTEGER NOT NULL PRIMARY KEY DEFAULT AUTOINCREMENT,
         date_created DATETIME NOT NULL DEFAULT NOW(*),
         date_updated DATETIME NOT NULL DEFAULT NOW(*),
    );Now how can I get the above table to work when attempting to em.persist(myItem) whereby dateCreated and dateUpdated are both null?

    I should also mention that TopLink has always supported the ability to retrieve the current time from the database for use in optimistic locking. The TimestampLockingPolicy offers the ability to configure the next value being retrieved from the database instead of using the local time from the JVM. Our extended optimistic locking configuration does not currently support setting this option but it could be done using a descriptor customizer which can be configured in your persistence unit properties.
    Using optimistic locking may be a good solution for the last modified date since it will also ensure that you do not corrupt the database if someone else has incremented this value since your last read.
    Doug

  • How can i use Firefox as my default browser but still use/see my original MSN email account without having to go through hotmail?

    I would like to sign on to the internet using Firefox, MSN Internet Explorer, but still be able to go to my MSN account, not thru Hotmail...

    You can place that bookmark on the Bookmarks Toolbar (View > Toolbar > Bookmarks Toolbar) for easy access.
    See also [[Bookmarks]]

  • Can I use calculated value as default parameter value?

    Discoverer version:
    Oracle BI Discoverer 11g (9.0.4.00.00)
    Oracle Business Intelligence Discoverer Plus 11g (11.1.1.3.0)
    Discoverer Model - 11.1.1.3.0
    Discoverer Server - 11.1.1.3.0
    End User Layer - 5.1.1.0.0.0
    End User Layer Library - 11.1.1.3.0
    Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
    Java Virtual Machine: Sun Microsystems Inc. 1.6.0_29
    JVM Memory Available: 9286KB out of 43728KB
    Operating System: x86 Windows 7 6.1
    Can I have a pre-calculated value in the value selection box E.g. a date value that is calculated from a function that getting current finanical year from a item.
    That is, when 'Edition Parameter value' window pop up, a calculated value exists instead of a blank field.
    Edited by: 901005 on Dec 8, 2011 6:12 PM

    Hello
    Your friend is wrong - this functionality has never existed. Perhaps your friend is getting confused over the ability to define a fixed default value which has always been there.
    Sorry about this.
    Michael

  • Can I use the 11R2 version of Gateway for a 10.2.0.4 database?

    Currently have a 10.2.0.4 database on linux, and I plan to use DRDA gateway to extract data from a DB2 database V9 into my 10.2 database. I have configured already on a test system with gateway version 10.2, but I was wondering if it's possible to install the latest/greatest version of gateway (11.2) and point to a 10.2.0.4 database? Or do I need to install the 10.2 version?
    Thanks

    Yes. DRDA gateway 11.2 is certified with 10.2.0.4 Oracle database. Please be aware the 11.2 gateway is a complete new gateway including the features of DRDA, TG4DB" (the Mainframe DB2 gateway) and TG4DB2400 (gateway for AS400).
    The config file format is completely different from all previous DRDA gateway versions, so please configure the gateway properly - for example following the manual or Metalink note:
    Note.945879.1 How to Setup DG4DRDA (Oracle Database Gateway for DRDA) Release 11.2 on Linux
    Edited by: kgronau on Feb 2, 2010 6:37 AM

  • Can i use the same email address for different users?

    we are a small department with one email address, can i use the same email address for different users?

    No. Each user needs to have his unique ID.
    Mylenium

  • Can you use overlapping iTunes and iCloud accounts?

    Apple IDs are fun, yes?
    The situation:
    I'm slowly upgrading two (2) Macbook Pros with Mountain Lion, and I've run into the problem of two members of the same household tied to the same Apple ID for iTunes purchases.
    I've read all the tech support articles and tutorials for saving the iTunes Apple ID and then adding two (2) more Apple IDs for iOS and Mac OS X iCloud services.
    I'm wondering if I can avoid juggling three (3) different Apple IDs by having some overlap.
    Here's the current setup:
    Spouse
    iPhone 4S / iOS 6
    iTunes tied to Apple ID #1
    iMessage using phone #
    No iCloud setup
    Macbook Pro 13" / Lion
    iTunes tied to Apple ID #1
    No Messages setup
    No iCloud setup
    Me
    iPhone 5 / iOS 6
    iTunes tied to Apple ID #1
    iMessage using phone #
    No iCloud setup
    Macbook Pro 15" / Mountain Lion
    iTunes tied to Apple ID #1
    No Messages setup
    No iCloud setup
    My question is -- since Apple ID #1 is technically my email address, can I use it for both the shared iTunes purchases and my iCloud account?
    The revised setup would be:
    Spouse
    iPhone 4S / iOS 6
    iTunes tied to Apple ID #1
    iMessage using Apple ID #2
    iCloud using Apple ID #2
    Macbook Pro 13" / Lion
    iTunes tied to Apple ID #1
    Messages using Apple ID #2
    iCloud using Apple ID #2
    MeiPhone 5 / iOS 6
    iTunes tied to Apple ID #1
    iMessage using Apple ID #1
    iCloud using Apple ID #1
    Macbook Pro 15" / Mountain Lion
    iTunes tied to Apple ID #1
    Messages using Apple ID #1
    iCloud using Apple ID #1
    If it's easier just to create Apple ID #2 and Apple ID #3 for iCloud and messaging stuff, let me know. I'd prefer to keep it simple, though.
    Thanks,
    IronChefMoto

    Winston Churchill wrote:
    Yes, you can use your existing ID for both iTunes and iCloud, while your spouse uses it for iTunes and has her own ID for iCloud.
    If I decide later to initialize a third (3rd) Apple ID for my own iCloud materials, how does that effect my iMessage (iOS) and Messages (OS X) history / experience?  I guess that would have other implications for any data stored in iCloud on what we've been calling Apple ID #1, wouldn't it? Beyond just the messaging components?
    Thanks,
    IronChefMoto

  • Can I use PayPal Pro for configuring recurring payments?

    Hi,
    Can I use a PayPal Pro payment gateway for recurring billing?
    Thanks in advance,
    Diego.

    You may refer to supported payment gateway list for confirmation : User manual
    Please note that "PayPal Websites Payments Pro accounts set before may 2012 will support recurring feature, for all the accounts set after may 2012, recurring payments feature is not available anymore."

Maybe you are looking for