ASAP Implementation using SOLMAN
HI All,
Can you please guide me if we can implement sap using ASAP methodology in SOLMAN?
In other words can solman be a substitue for ASAP tools and download from CD?Or there is no substitute to ASAP software?
Also guide me if solman can become a part of ASAP methodology if entire ASAP methodology is not possible using SOLMAN and in what phase of ASAP nethodology implementation SOLMAN comes in picture?
Thanks.
Hello,
Solution Manager has the similar functionality as ASAP, though instead of CD based it is Server Based set of tools and it is modern, while ASAP is old.
You should look at SAP Methodologies at this link:
https://websmp204.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000724820&_SCENARIO=01100035870000000202&
Also look at RUN SAP and notice you can use ASAP Roadmaps : https://websmp102.sap-ag.de/~sapidb/011000358700001391212009E/Index.htm
Here is a link to run SAP Roadmaps: https://websmp107.sap-ag.de/~sapidb/011000358700001391212009E/Index.htm
Additionally this issue has already been discussed in thread: Difference between Solution manager and ASAP
Regards,
Paul
Similar Messages
-
Implementing ASAP Methodology using SAP Solution Manager
Hi All,
Can any one help me with any documentation regarding ASAP methodology implementation using Solution Manager.
The step by step process and transaction codes used for implementing it are there any guides provided by SAP for implementing the ASAP methodology in Solman.
It's an implementation project that we would like to track each phase in Solman.
Kindly help me to get more details.
Thanks in advance.Hi,
There are the 'ASAP Implementaion Roadmaps' wheras the latest available
is the 'ASAP Methodology for Implementation 7.0' Roadmap, and there are
the 'Upgrade Roadmaps' wheras teh lastest one of them is:
'Upgrade Roadmap (V3.2)'.
If you are on ST-ICO 150 SP24 both of these Roadmaps
should be available in your system.
There are two ways to display the roadmaps in RMMAIN.
One is to choose a project in RMMAIN, then the roadmap assigned to
the project in SOLAR_PROJECT_ADMIN is displayed.
The other one is to display any available roadmap in the system
To display one of the available roadmaps (without a project) choose
the button 'Other Roadmap' in RMMAIN and in the upcomming popup
hit the button 'No Project'.
After that you should get an addtional button besides the Project
button called Roadmaps (Other Roadmap).
When you hit now this button you will get a list of all available
roadmaps.
Some further notes for referencing (although they can be old but still helpful)
644651 How to find the Reference Model in Solution Manage
826586 ASAP Implementation Roadmap
Hope this helps.
Cheers
SH -
Add ASAP Implementation Roadmap v3.8 for SolMan
Hi Experts !
I want to add ASAP Implementation Roadmaps v3.8 in Solution Manager, and have access to the RMMAIN.
I have not found info, but I understand that it should be possible.
Someone could help me?
Thanks in advanceHello Gustavo,
I hink that you are mistaken. SolMan 7.0 uses ST-ICO 150-700 as component. As far as I know there is no such 160-700. I think what you mean it is the LEVEL of that component wich is 15, 16 or 17. Probably the new roadmap ASAP Implementation is already available in STICO 150-700 level 16 or 17.
Can you please check the status of your components in your SolMan? Go to System->status and the press the "lupita" and check ST-ICO LEVEL.
Regards
Esteban -
How effectively do you use SolMan in SAP ERP Implementation, Upgrade?
Effectively utilizing Solution Manager (SolMan) during SAP ERP Implementation or upgrade are very far and few!
I have shared my thoughts and experience of using (or not using) SolMan in this piece.
I will be glad to know your experience and insight on SolMan's utilization, either in comments here or on the article's website.
Until next time,
Jawad AkhtarAnyone..? <crickets>
-
Using Solman to generate EWA, it came dump SYNTAX_EROR
Hi Experts there,
When I used solman 4.0 to generate satellite system which is ERP 2005's EWA, it came dump SYNTAX_ERROR
Syntax error in program "RDSVASAEA_SQL______________034 ".
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPLDSVAS_PROC" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program "RDSVASAEA_SQL______________034
" in include "RDSVASIEA_SQL______________034 " in
line 37:
"Field "DLD_GLOBALDATA001202" is unknown. It is neither in one of the s"
"pecified tables nor defined by a "DATA" statement. "DATA" statement. ""
"DATA" statement."
but this solman to generate EWA from exactly same systems but is DEV and QUA were ok.
please help me and thank you !
Wei WuHi,
Check this, 851621,863546 - It may solve your problem.
Also please provide if you have any other info, full dump report, support pack level.
Feel free to revert back.
--Ragu -
Creating shared library of native method implementation using gcc
Hi
I am using Dev-C++ IDE for writing and compiling C Programs. It supports gcc.
I have to build a shared library of a native method implementation using gcc compiler.
In JNI tutorial build script is given for VC++ which is as follows
cl -Ic:\java\include -Ic:\java\include\win32
-LD HelloWorldImp.c -Fehello.dll
Similarly I wanted build script for gcc compiler.
Thanks
ShaileshHere is an example of building a library from one module with CygWin's gcc:
# Must set JAVA_HOME and LIBRARY_MODULE before
gcc -mno-cygwin -D__int64="long long" -I $JAVA_HOME/include/win32 -I $JAVA_HOME/include -shared -Wl,--kill-at -o $LIBRARY_MODULE.dll $LIBRARY_MODULE.c -
Using SolMAn / ChaRm for upgrade to ECC6
Good Day;
We are planning on using SolMan / ChaRm for our upgrade from 4.6C to ECC6 and I am wondering if it would be possible to do the following
Upgrade a development system to ECC6.
Define 2 virtual ECC6 Systems, 1 for the QA system and 1 for the production system
Create a project that contains all the business processes and has the above landscape assigned. This project does not have ChaRM active.
Create a maintenance cycle with the above landscape attached and ChaRM active.
As we upgrade the real QA and production systems to ECC6, we want to u201Cflip outu201D the virtual systems for the u201Crealu201D ECC6 systems.
Does anyone have any input in this type of plan?
Regards
DonGood Day;
We are planning on using SolMan / ChaRm for our upgrade from 4.6C to ECC6 and I am wondering if it would be possible to do the following
Upgrade a development system to ECC6.
Define 2 virtual ECC6 Systems, 1 for the QA system and 1 for the production system
Create a project that contains all the business processes and has the above landscape assigned. This project does not have ChaRM active.
Create a maintenance cycle with the above landscape attached and ChaRM active.
As we upgrade the real QA and production systems to ECC6, we want to u201Cflip outu201D the virtual systems for the u201Crealu201D ECC6 systems.
Does anyone have any input in this type of plan?
Regards
Don -
How to approve the packages using solman
Hi Friends
I have Installed a Solution manager 7.0 version.
Now for my scenaris I have to download packages from SMP ERP stack 11 for ECC 6.0 system
The packages ask for approval.
How can I configure this by solman system that my packages are downlaoded in ECC system from SMP via solution manager system.
I am using Solman 1st time to downlaod packages.
Thanks and Regards
PoojaHi
Have you configured Maintain Optimizer in Solman,this is mandatory if you want to download support pack stack for ECC6 or any other SAP versions
configure the maintenance optimizer in solution manager using the following weblog
/people/issacnolis.ohasi/blog/2008/01/04/upgrade-sessions-whats-sap-solution-manager-maitenance-optimizer
Also check note:1024932 & 1032322
If you have already configured MO then
Log on to your SAP Solution Manager system and start transaction DSWP (or SOLUTION_MANAGER). In the left frame, select Solution Overview>Then, choose the tab Change Management.>Choose Maintenance Optimizer-->Choose Create New Maintenance Transaction
You need to maintain your S user ID through AISUSER tcode before that.
Then you can directly move files to your download basket, after confirmation
www.service.sap.com/rkt-solman->select solution Manager 7.0>technical Role-->Technolagy
&system administartion just drill out there you can find lot of simulator
Regards
Uday -
Active server implementation using jaas
Active server implementation using jaas----------can someone suggest me how to go about it
help needed immediatelyHave you programed your server? Can you communicate with me about the subject? My email is [email protected] QQ: 540028839
-
ASAP Implementation Roadmap for SAP Exchange Infrastructure
Does anyone know if the "ASAP Implementation Roadmap for SAP Exchange Infrastructure" is still available somewhere?
I'm looking for templates for documenting XI flows.
thanks!hi,
try this link:
https://websmp109.sap-ag.de/~sapidb/011000358700004919702004E
Regards,
Michal Krawczyk
http://mypigenie.com - XI/PI FAQ -
Geography based industry scenario which can be implemented using user exit
Hi All,
I am searching for a geography based industry scenario which can be implemented using user exit strategy.
Please let me know me if anyone knows about any such scenario.
Thanks & Regards,
Pranjali.Hi Amith,
IDOC configured throgh CHANGE pointers.So no need to worry about IDOCS and all.My work was trigger idocs by user exits.Wen ever i change venodr no.. idocs shoud be triger.
Now my question was Insted of going transaction( from there we can go to debuging mode) i want to check this Exit by RBDMIDOC programe(ofter excute this programe and give Message type as CREMAS,from there i want to go debugging mode).
Just now i checked,i put breakpoint in Include programe(INCLUDE ZXF05U01) and excute from XK01,it goes to debuging mode,so its fine.But i want triger from RBDMIDOC programe.Ofter excute RBDMIDOC programe,we can enter CREMAS.From there i want to go debuging mode.
Pls help me,
Thanks -
Logout implementation using Site Studio
Hi,
I just wanted to know if the logout functionality of UCM has been implemented using site studio and if yes, how to go about it. We are currently using the logout component that is present in UCM. However, the problem is, that the usage of that component requires you to add a registry entry in IE, to allow this to work. This isnt something that can be done on all machines and is hence not a feasible solution. So I was wondering if there's any other way that this can be implemented. Suggestions please?!
Thanks.Is there a way to use Fragments or do I need to get a developer to write me non-Stellent code? Well, you need to get yourself a developer to write a fragment. And - dependet on what you want to do - maybe some Content Server customizaitons like custom services.
Imho though it is not a good idea to use Site Studio as a web application plattform. A simple form is fine but if it gets more than that, you should consider writing a jsp or hcsp and check it in to the content server. This jsp or hcsp can still use your fragments and your html layout so that it does not look different from the Site Studio pages. Then you can link this script to a section in your Site Studio web site hierachy and by doing so include this dynamic part into your web site.
Another approach for when you really need to do a lot of application stuff is to write the applications in another Java web app - not checked in to the Content Server - and use CIS to pull content from the Content Server. Or Web Services. -
Flush Implementation using mbeans
Hi all,
need your help with an issue regarding mbean implementation using IBM WAS + JMX + Spring. The requirement is : we have a spring based application and in the spring applicationContext file we have certain value injections that i need to make configurable. For this i have used a facility provided by spring to expose a bean as an mbean. Now everything works perfedtly fine but only till the time my server is up and running. As soon as i restart my server the changes that i made using mbean are lost. I want to flush the changes(using JMX) made using mbean to the code so that these changes can be made into the codes permanently and not temporarily as its being done by jmx. Any help is highly appreciated. Thnx in anticipation.
Regards,
VaibhavHello,
Take a look at this page.
Please note it says:
"The LabVIEW FPGA for SPARTAN 3E XUP driver was developed to enable educators
to use LabVIEW FPGA to teach digital and embedded design concepts. This
driver is for educational use and cannot be used on custom FPGA
hardware."
If this does not apply to you, then please take some time to look at the NI compactRIO FPGA product which may be better for your application:
compactRIO
If you are eligible to use the SPARTAN 3E XUP driver, then a video introduction and tutorials are available.
Hope this helps!
Message Edited by macaba on 07-24-2009 10:09 AM
Mark B
===If this fixes your problem, mark as solution!=== -
How advantages of "Call By Reference" can be implemented using Java
As I know that java doesnot support "Call By Reference" as C++
does.
I want to know that how advantages of Call by Reference can be
implemented using Java.There is some misunderstanding here. Method arguments in Java are passed by value. However, if you pass a reference (to an object) by value, you can still modify the object that the (copy of the) reference points to.
public void method1() {
StringBuffer buf = new StringBuffer();
// Here, method2 cannot change the value of the variable buf,
// but it can modify the object that buf points to.
method2(buf);
public void method2(StringBuffer sb) {
// You can modify the StringBuffer.
sb.append("hello");
// But this is useless, it will not change the variable buf
// in the calling method.
sb = new StringBuffer();
}Jesper -
ADs implementations using OSMF player based application
Hi,
Greetings !!
I am currently creating an OSMF player based application for which I need to implement ADs in player. I need your help to implement the same using Flash Builder 4.6.
It would be great if you could provide documentation and swc file for ADs implementations using OSMF player based application.
Any help will be appreciated !!
Regards
Pr33THere is a link to player:
http://front.xstream.dk/sa/resources/swf/?id=5600
Here is a manifest file:
http://fms4.xstream.dk/sa/f4m/2011-07/1309755901073853000-H264_1400kbit_128kbit_1024x576_m p4-STD.f4m
Files used for generating all f4f and f4x files:
http://front.xstream.dk/sa/resources/content/mp4/2011-07/1309755901073853000-H264_400kbit_ 64kbit_512x288_mp4-STD.mp4
http://front.xstream.dk/sa/resources/content/mp4/2011-07/1309755901073853000-H264_800kbit_ 96kbit_768x432_mp4-STD.mp4
http://front.xstream.dk/sa/resources/content/mp4/2011-07/1309755901073853000-H264_1400kbit _128kbit_1024x576_mp4-STD.mp4
Command used for f4fpackager:
f4fpackager --input-file=1309755901073853000-H264_400kbit_64kbit_512x288_mp4-STD.mp4 --bitrate=400
f4fpackager --input-file=next_file --bitrate=800 --manifest-file=manifest_produced_in_previous_operation
and so on...
Maybe you are looking for
-
I have a macbook 13" late 2009 operating system OS10.9.2. I would like to connect my macbook to my TV . I have connected a mini DVI / HDMI cable to my tv which works for the picture but have no sound. How do I get the sound to work? Thanks
-
Hi, Sap people. I have a formula in query designer to count the number of rows returned in a query. The formula has only =1. Let's name it A Then I have another formula, let's name it B, that has in their body SUMRT A. This formula B always gives me
-
Having photo enlarge in Blog...need help
I need to be able to double click on photo in blog and have it enlarge to full size. This question has been asked here before but was never answered as I can see. This is a must for me to do what I need to do. I appreciate any help. Thanks
-
I can not monitor Xmod to monitor ( the firmware update doesn't work on my ca
I have a problem I can not monitor Xmod to monitor the sound when I use line-in to record,even if I have already update my firm ware.actually the main reason I bought this sound card is my laptop very noisy when recording ,so I hope I can get a usb s
-
Creating DB - stuck at 85%.....help?
while installin 8i PE, in minimal mode, the progress bar hangs at 85 % (creating database) i waited for abt 25 min.... no progres.... thanks... sundar