ASCP is not picking Substitute Item if Primary Qty of that item available.

Hi, We have requirement of using the component substitution functionality while releasing Manufacturing Jobs through ASCP. or Use Substitute Components e.g ITEM A & ITEM B.
ASCP should use 75% of Item A & 25% of Item B for completion of a Manufacturing Jobs (Pls note that both items have different Item Codes)"
We can use the component substitution setup, item B can be used without any shortage of item A, Or in other words we require a functionality to allocate the percentage of supplies to manufacturing Jobs, e.g. with a setup, the supply will be distributed to item A and B for 75% and 25% to Manufacturing jobs & when we drill down in each Job order, both items will be used as 75% and 25% respectively.
Regards
Umair

Hi, thanks for your response, our requirement details are as follow
We have 2 Products Named Product X & Product Z, there are 2 Items (ITEM A & ITEM B) of different manufacturer but can be used in both Products A & Product B,
Case 1: we have to use 75% of Item A in Product X & 25% of Item B in Product Z.
Case 2: we have to use 75% of Item B in Product Z & 25% of Item A in Product X
Further pls guide how we can setup the BOM to have for each unit of end item -> 0.75 usage of item A and 0.25 usage of item B
Regards
Umair
.

Similar Messages

  • Note 3 lollipop update 5.0 erased my sd card. Phone does not pick it up as if no sd card is available.

    The phone does not pick up my sd card at all.i try connecting my sd card to the computer and now it says please format.

    Unfortunately you are not alone.  While I got through without problem, other users of Samsung phones have reported the same problem.
    reformatting sometimes fixes the card, but anything stored on it is gone.
    a Bit late, but the recommendation is to remove an SD card before updating.

  • How to set item via URL only when that item is null

    From application A, I am attempting to set an application-level item of Application B via the URL to Application B. I only want the application-level item of Application B to be set when it the item is null. If it is not null, I don't want the application-level item to be set to something else.
    I can't think of a way to do this from within Application B after the URL takes the user to Application B and I can't think of a way to do it from within Application A before the URL is invoked. The URL in Application A is part of a List (Shared Component) so it is not clear to me how to use PL/SQL to dynamically tell the URL to include or not include the assignment of the application-level item in the URL call.
    Am I missing something obvious?

    You could pass the value into a different item in application B. A before-header page process in the target page could then perform the transfer of the sent item into another item if that other item is null.
    Scott

  • To Grey out the material , item catagory and qty for BOM items.

    Hi,
      I have situtation where we need to block the changes for the BOM sub items when change of sales document(VA02). Ultimately user should not be able to change the sub items of BOM in VA02.

    Hi Ramakrishna Garapati,
    You can gray off the BOM sub items ultimately this will enable who ever has this profile to use va02, they will not be able to do any changes, if required also. This will restrict everybody under this profiles. In case you need to do some change it does not allow.
    The best possible way is to restrict the user from Transaction VA02, and make it authorized Tcode, i.e. when required need to take the authorisation and do the necessary changes, this way it is tracked.
    We had similar kind of issue, now restricted from using VA02, once authorized you get different login/pwd, specially for that point of time. Once changes done your pwd expires.
    Regards,
    Harish.

  • Automatic Payment program not picking vendors

    Hi
    On Monday,user run F110, some vendors are not picked up for payment. When I've checked this vendor master data payment terms 60 days (Net due date from Doc.date) is mentioned. These vendors fall in to due next 06/22/2008.But they are in open items only. The payment method is assigned correctly, no changes were done for past 3/4 months.
    My doubt is Why these are not picked for payment when they are in Open Item in this payment run ?
    Can any one tell me when will these vendors can be picked up for payment ? Do they complete the total period as per payment terms assignement ?
    Regards
    Madan

    Hi
    I've checked the next p/date, it is 06/19/2008 which is less than due date (06/22/2008).
    Is it the reason for not picking ? If I want this vendor to be picked up for payment, Shall I run this once again by giving more than due date like 06/24/2008 ?
    I've checked other vendors also, they fall under due date and got picked up.
    I appreciate your kind response and will award you the points soon..
    Regards
    Madan

  • Calendar Theme Not Picking Up Events

    I have a "today" calendar theme that is now not picking up all events.  I understand that the theme does not pickup "all day" events.  I am speaking about the events with times.  My other themes will pick them up, but not this particular one.  So, for example, my Blackberry with this theme shows events taking place in about two weeks, but not any current ones.  Any suggestions.  Thanks.  Phil

    PhilNH wrote:
    I have a "today" calendar theme that is now not picking up all events.  I understand that the theme does not pickup "all day" events.  I am speaking about the events with times.  My other themes will pick them up, but not this particular one.  So, for example, my Blackberry with this theme shows events taking place in about two weeks, but not any current ones.  Any suggestions.  Thanks.  Phil
    Hi and welcome to the forums!
    There are a large number of themes with the Today previews. If your other themes are picking up the correct info, I would
    say the device data and database are fine. If that assumption is correct, I would see the theme builder.
    KB14646 Calendar preview and calendar notifications are not displayed when using the BB Today theme
    Thanks,
    Bifocals
    Click Accept as Solution for posts that have solved your issue(s)!
    Be sure to click Like! for those who have helped you.
    Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

  • *BOOT CAMP* Windows XP not picking up wireless signal on Lion

    I just got a new iMac two days ago and was able to install Windows XP from my old Dell Latitude boot disk. Yes, I thought it was odd... But it worked. I do understand that Lion only provides Windows 7 drivers in Boot Camp Assistant, but I was able to install Boot Camp 3.0 and 3.1 drivers for XP, right from the Apple Support Boot Camp driver link.
    Well... My main issue lies here... When I switch to the XP side, it wont pick up a wireless signal. That's all I need so that I can start updating Windows from the internet, but it is not picking anything up.
    I'm assuming that I am just missing the driver, but like I said, I installed the drivers provided by Apple. This is very frustrating and am not sure what to do.
    Can someone PLEASE point me in the right direction? Thanks in advance.
    Brian

    This appears to be a problem with some of the newest MacBooks. There are several posts on this issue. It is possible that, as you seem to have noticed, switching to an NTFS formatted partition will solve the problem. See e.g. http://discussions.apple.com/thread.jspa?messageID=5947955&#5947955

  • Just bought a macbook pro 2008, will not pick up wifi connection that my old lap top has very quickly. whats wrong?

    I just bought a used macbook pro, turned it on and it will not pick up wifi connection n my house that my old lap top has done very fast and easy wifi connection. What do i have to do to log on to internet with wifi with my macbook pro?

    That could be the reason they were selling the old macBook Pro.  Does the network utility even see any WIFI networks?  If it doesn't, and you know they exist, something with the WIFI might have failed.  Can you connect using the wired ethernet port?
    You might have to take it to an Apple store or an AASP for a checkup.

  • Help required - Sales order item is partially delivered but the item grayed

    I have a sales order 123 having say item10 with qty 1, item20 with qty 10 , item 30 qty 12
    Item 1 confirmed qty 1 and delivered qty is 1
    Item 2 confirmed qty 10 and delivered qty 10
    Item 3 confirmed qty 1 and delivered qty is 1
    Now the item3 still has open requirements of 11 to be delivered. But the item is GRAYED OUT already.
    even if I do ATP the qty is not confirming for the remaining 11 pieces.
    Why is that? How to make that item out from GRAY.
    How to confirm the remaining 11 qty for that item.
    Help required as early as possible.
    Appreciate ur help guys
    Radha

    hi Radha, how are you ?
         ---the partial deliveries in master data must have not been mentioned.
         ---the deliveries should be upto target quantity.
         ---check order type, item category and schedule line category.
         ---check unrestricted stock availability.
    thank you
    regards
    Khera.

  • Asset Creation in PR and PO and MIGO as a single Line item with "N" qty

    Hi All,
    In Purchase requestion ME51N
    Now we are creating "n" number of assets ( All are same item but "s.no" will vary) with "n" number of line item.
    Instead of this I have to enhance to create only one line item( For same item) with "n" quantity.
    for the ASSET account Assignment we have to create Asset(Temp no) for the each item/quantity(if the same item).
    as well as if they are going to create a PO with ref to PR they have to see all the "n" number of asset no.
    In MIGO creation for each asset we have to assign S.No and Asset Tag.
    How enhance the functionality in PR,PO and MIGO as well as in Invoice.
    Is it any User Exit/BADI is available for PR/POand MIGO to show all the "n" number of assets for a single line item.
    Kindly help me to give details to proceed further.
    Thanks in advance.
    sharma

    Hi Sharma,
    What i understand from your question is, you want to create a single line item in PR and PO. But the qty would be > 1.
    Each single qty would have its own asset number in account asssignment tab of item details of PR & PO.
    This is what you are expecting...Right???????????????
    Then this is possible with certain limitations.
    While creating PR, enter only one item with more qty.
    In item details section, in account assignment tab, on top left corner, there will be a button called Multiple account assignments.
    Click on it, then it looks like a table, where you can enter more than one line. (each line will have its own asset no)
    And choose option Distribute on qty basis for field Distribution.
    So that you can enter 1 qty for each line. ( Ex: if you created one line item in the item level with 10 qty, you need to maintain 10 line here, each qith 1 qty and diff asset no).
    The only limitation to this is, the GRN would be treated as non valueted. So when you make GRN there wwould not be any accounting doc. ( means no use of GR/IR clearing account as like normal for POs)
    when you prepare MIRO, all the assets will be capitalised and vendor credited.
    But in case if you receive partial invoice, then you have choose manually in MIRO. which asset is ot be capitalised.
    After entering the PO number in MIRO, there will be one line will be appeared with full qty. in the same line, move till the end of line, there you will have one button called Account assignments.
    Choose and go there, here you can choose which individual asset line to be considired.
    This will resolve your issue.
    Thanks,
    Srinu
    SRBORIGI_MULTIPLE ACCOUNT ASSIGNMENTS

  • TDS liability line items are not picking in u2013 J1INCHLN

    Hi Experts
    During depositing of TDS through J1INCHLN it is not picking all line items i.e. available in Ledger (FBL3N). We came to know after reconciliation even as all line items are available in table With_item as uncleared.
    We are facing this problem as the data from 01.03.2009u2026. Previously everything was working fine.
    One more thing I will stress here that we have started Purchase Order based invoice verification also from this period.
    Pl help ASAP.
    Regards
    Kuldeep Dubey

    check the line of TDS is having the Business Place, if the business place is not capturng in TDS line items , then the create the substitution for Business Place & Section Code.
    without business place in TDS line items you can't make the TDS payment.
    Regards
    Akmal

  • MM: PO Not Picking up PR Having Multiple Line Items

    Hi All,
    When Creating PO with Reference to PR Having multiple line items, not picking up the line items and also the vendor and also the where in we  have to select  input tax code.
    CASE1: Created PR 760001340 with single line item and also could able to create PO.
    Case2: Created PR 760001341 with multiple line items, When creating PO with reference to PR the line items and Vendor are not picking Up.
    Plz. Advise a solution.
    Thanks in Advance.....
    Regards
    Sudheer

    HI SHWN,
    Thanks for prompt response.
    ERROR Message: When referencing a requisition, please also enter a requisition item no.
    Regards
    Sudheer

  • TANN item category item not picking for return sales order

    Hi all,
    I have a question regarding TANN item category. This TANN item category item is not picking for return sales order type. As far as i know RENN is the free goods for return sales order. Can you please clarify the above question further

    Hi
    If you are making return order by copying sales order then please see this procedure also.
    Try to check in the copy control also.
    Go to the following path IMG u2013 Sales and Distribution u2013 Sales u2013 Maintain Copy control for sales documents. (Tcode VTAA)
    Select copying control : sales document to sales document.
    Search your return delivery order from the reference sales document type.
    Then select the item from the left side Colum.
    Go and find out TANN item category and click on detail.
    Check out Item Cat proposal. If it is empty then type your RENN condition type over here.
    Now try to create the return sales order it might work.
    Raj.

  • Commitment item not picking while MIRO posting for Service entry sheet

    Hi to all,
    We have activated Fund Management in middle of the year where there were purchase order completed to till MIGO. When we do MIRO now system unable to pick commitment item from FMDERIVE.
    We have created Commitment item as 50/3 combination ( No budget check ) and assigned to GR/IR clearing account.
    We also activated trace in FMDERIVE and checked MIRO  posting and found that derivation is working properly but while posting it is triggering error.
    Some one advise me as it affected daily activities.
    Thanks & Regards,
    Y.Kiran Babu

    Hi,
    For the purchase order completed and the related MIGO created before FM was implemented, you need to run FMCN and FMCT.
    I will explain to you in detail all the information related to the matter.
    First of all, it seems to be in your PO that does not have FM account assignment (funds center and commitment item) in account assignment TAB. In addition, the error occurs usually also because in your SES the FM account assignment is missing.
    For GR and IR documents FM always takes the major part of the FM account assignment from the PO.
    You can fill these account assignments by using the programs RFFMCHAN/RFFMCHAT.
    FMCN/FMCT must be run for the first document in the chain, which is the PO in case you don't have a PR assigned to this PO or an earmarked fund document. If you have PR's assigned to the PO's please run FMCN/FMCT for the PR first.
    When executing the FMCT transaction, ALL documents selected in one group must be tested and processed successfully TOGETHER. If any one document fails, the ENTIRE group is shown as in error.
    Therefore, first step is to ensure that the reference PO has a valid FM account assignment and is updated in FM. This should be done by FMCN/FMCT and subsequent posting with FMN4N (see reconstruction note 189761).
    The SES itself might not be changed by FMCT. Therefore you should fulfill the FM account assignments in SES manually or with a custom program.
    Please check also your table FM01X. As an alternative solution, you can enable one of these flags in table FM01X, depending on your business needs:
    FLG_PO_PROTECT if you want to always inherit the fm account assignment from the reference PO and therefore skip FMDERIVE
    FLG_FMDERIVE_FORCE if you always want to force a call to fmderive in all cases
    FLG_SES_OVERWRITE in services, if you wish to overwrite the account assignment from the SES with the derived values from FMDERIVE.
    You can find more information about it in text part of notes 1146677 and 923672.
    FMDERIVE is skipped for GR/IR lines and the Commitment item is inherited from the PO regardless of whether or not the GR/IR line is FM relevant. This is SAP standard behavior.
    If you want to force the Commitment item to be derived from the GL account for the GR/IR line, you can use the FLG_FMDERIVE_FORCE flag as described in note 923672.  This will allow FMDERIVE to be called for these lines.  Please be sure to fully test this to ensure that FM account assignments that you do not want to be overwritten are not incorrectly derived.
    Bear in mind that for PO´s that does not have account assignment you should run FMCN/FMCT + FMN4N. For this you would need to check the flags and which one is more related to your needs. With the appropriate flag marked in FM01X (active with X) you should be able to run the transactions without any issue.
    Based on note 189761, after doing all the previous suggestions and the issue does not appear anymore, I suggest you to run the following programs:
    1) FMN0 for this PO/GR to see if the actual values are correct in FM table FMIFIIT (FM actual line items).
    2) Run report RFFMRC04 (transaction FMAF). The reconstruction programs always update the totals records in Funds Management. Therefore, you do not normally need to reconstruct the totals records.  However, if you suspect there are data inconsistencies in the totals records, you can analyze and correct these using the report RFFMRC04 (transaction FMAF).
    If you correct the totals records, you must do this before you reconstruct the assigned values (see below).
    3) Run reconstruction for AVC
    You can also reconstruct the assigned values using the following tools:
        o  Report BPINDX03 (transaction FMBV) for former budgeting
        o  Report RFFMAVC_REINIT (transaction FMAVCREINIT) for the Budget
           Control System (BCS)
    Make sure that no other system activities (postings, budgeting) are carried out during a reconstruction (commitment/actual or assigned values).
    I believe that this resolve your inquiry.
    Best Regards,
    Vanessa.

  • Price was not picking from the Condition type for Item Category 'P'  in PO

    Hi Experts,
    I Created one condition type based on Material and WBS which price was fixed based on this
    I used the Purchase Order having Item <b>Category ‘P’ or ‘Q’</b> Price should pick from the condition type where I mapped the WBS Element and Material.
    The Net price was not picking from the Condition type Record.  Why? What should be the Problem?
    Whether my logic is correct or not?
    <u><b>
    The Scenario:</b></u> I want to fix the Material price base on each WBS Element for a Project. For each WBS Element the Price will be various for same material.
    Please help on this.
    Thanks
    Muthukumar

    Hi,
    In standard configuration you cannot set item delivery date as a pricing data.
    Maybe you shoud look at SAP enchancement - in dedicated structures you can pass additional item data (structure KOKMP).
    IMG link:
    Materials Management -> Purchasing -> Conditions -> Define Price Determination Process -> System Enhancements
    hope it helps.
    regards,
    wojciech

Maybe you are looking for