ASCP Legacy Collections Dropping Routings with Alternate Resources

SR# 6793428.993, (11.5.10.2)
How can we load routings with alternate resources from a legacy instance without
dropping duplicate resources.
It appears that the last alternate routing is loaded - dropping all the other routings.
When uploading routings, through legacy collection, having alternate resources, 'duplicate' resources are dropped during ODS Load phase.
In staging data seems to be ok after Pre-Processing.
Standard collection with identical routing does not drop thee alternates.
Requirement is:
Item has one operation with four (4) scheduled resources A,B,C,D. There is alternate resource E for resource A. So we should have either combination A,B,C,D or E,B,C,D.
There can be multiple alternate resources for A
Customer has:
MSCCLPPB.pls 115.151.11510.4
The latest release is:
MSCCLPPB.pls 115.151.11510.17
The code performing the legacy collection is identical.
Message was edited by:
Bob Marchant

Partha,
Thanks for the response. What we want to achieve is to be able to run all these lines in parallel, which can certainly be done by using alternate resource. I've infact setup alternate resource for the below scenario but not able to get them running in parallel. Alternate resource will work only in case when primary resource doesn't have any capacity.
In this below case, ASCP was using 100% capacity for primary while for alternate resource it was suggesting to use anyone of them rather than equally divide the demand on them.
Let me know if you need more details but I couldn't find anyway to model this scenario in ASCP current configuration.
Thanks
Nikhil

Similar Messages

TS5249 Problems with the Korg Legacy Collection in the new version of Garageband in Mavericks.

Hello!
I'm having problems with the Korg Legacy Collection in the new version of Garageband in Mavericks. When I try to load the AU, I get this error message:
"Failed to load Audio Unit, please contact the manufacturer for an updated version or further assistance. (-10110)"
They seem to work fine in Ableton Live 8 Lite, also running in Mavericks. So, I think it is something with Garageband. In addition, Korg updated to 64bit early last year.
Anyone know how to fix the problem? Or is Korg or Apple's problem?
Thanks.

They seem to work fine in Ableton Live 8 Lite, also running in Mavericks. So, I think it is something with Garageband. In addition, Korg updated to 64bit early last year.
Have you checked, if you have the newest 64-bit version installed? There may still be an older version sitting around - check both plug-in folders, the one in your Home folder and the one in the system library:
~/Library/Audio/Plug-Ins/
/Library/Audio/Plug-Ins/
Some programs may still be able to use 64-bit plug-ins, but GarageBand will not use them: http://support.apple.com/kb/TS5249

Unable to collect Product Return History using legacy collection

Hi,
I am facing issue in collecting product return history using legacy collection, File Upload (User File Upload) & Loader Worker erroring out as below. As I observe, its inserting space after .ctl, .dis & .bad file path.
Can some one guide me how to reslove below issue.
Loader Worker
Argument 1 (CTRL_FILE) = /u02/oracle/xxxxx/inst/apps/rights_apps/logs/appl/conc/out/5913849MSD_DEM_RETURN_HISTORY .ctl
Argument 2 (DATA_FILE) = /u02/oracle/xxxxx/inst/apps/rights_apps/logs/appl/conc/out/5913849PrdRetHist.dat
Argument 3 (DISCARD_FILE) = /u02/oracle/xxxxx/inst/apps/rights_apps/logs/appl/conc/out/5913849MSD_DEM_RETURN_HISTORY .dis
Argument 4 (BAD_FILE) = /u02/oracle/xxxxx/inst/apps/rights_apps/logs/appl/conc/out/5913849MSD_DEM_RETURN_HISTORY .bad
Argument 5 (LOG_FILE) =
Argument 6 (NUM_OF_ERRORS) = 1000000
===================================================================
plan_id:0 plan_type:0 planning_engine_type:1
Creating dummy log file ...
Parent Program Name: MSCLOADS
This is NOT as part of a Plan run.
NLS_LANG original American_America.AL32UTF8 alt American_America.UTF8
LRM-00112: multiple values not allowed for parameter 'control'
SQL*Loader: Release 10.1.0.5.0 - Production on Tue Mar 11 19:58:20 2014
Copyright (c) 1982, 2005, Oracle. All rights reserved.
SQL*Loader-100: Syntax error on command-line
Program exited with status 1
APP-FND-01630: Cannot open file /u02/oracle/xxxxx/inst/apps/rights_apps/appltmp/OFq98wrx.t for reading
Cause: USDINS encountered an error when attempting to open file /u02/oracle/xxxxx/inst/apps/rights_apps/appltmp/OFq98wrx.t for reading.
Action: Verify that the filename is correct and that the environment variables controlling that filename are correct.
Action: If the file is opened in read mode, check that the file exists. Check that you have privileges to read the file in the file directory. Contact your system administrator to obtain read privileges.
Action: If the file is opened in write or append mode, check that you have privileges to create and write files in the file directory. Contact your system administrator to obtain create and write privileges.
***** End Of Program - No title available *****
File Upload (User File Upload)
Tue Mar 11 19:57:52 RET 2014: Profile 'MRP_DEBUG' Value : N
Tue Mar 11 19:57:52 RET 2014: ===============================================================
Tue Mar 11 19:57:52 RET 2014: fileLoaderInit: paramName = pLOAD_ID; paramValue=41563
Tue Mar 11 19:57:52 RET 2014: ===============================================================
Tue Mar 11 19:57:52 RET 2014: The control file Path /u02/oracle/xxx/apps/apps_st/appl/msc/12.0.0/patch/115/import/MSD_DEM_RETURN_HISTORY .ctl does not exist. Please contact your System Administrator
Regards,
ML

Hi,
Login to unix server and I believe the control file is placed in a custom top say $MSC_TOP in your environment.
just try to rename the ctl file without the MSD_DEM_RETURN_HISTORY<space>.ctl
And try to upload the file once again.
Hope this helps...!!!

SCOM - -500 Internal Server Error - There is a problem with the resource you are looking for, and it cannot be displayed

Hi There,
Need your assistance on the issue that we are facing in prod environment.
We are able to open web console from remote machine and able to view monitoring pane as well as my workplace folders from console . Able to view and access alerts and other folder in the monitoring pane. We are able to view and access My Workplace folder
and able to view the reports in Favorite Reports folder. But when I click on run Report we are getting the below error "500 Internal Server Error - There is a problem with the resource you are looking for, and it cannot be displayed."
In our environment we have 3 servers one is SQL server and two are SCOM servers. Please advise how to fix this issue. Do we have to do any thing from SQL End?
Errors: Event ID 21029: Performance data from the OpsMgr connector could not be collected since opening the shared data failed with error "5L".
Event ID 6002 : Performance data from the Health Service could not be collected since opening the shared data failed with error 5L (Access is denied.).
Regards,
Sanjeev Kumar

Duplicate thread：
http://social.technet.microsoft.com/Forums/en-US/7675113e-49f0-4b3a-932b-4aceb3cfa981/scom-500-internal-server-error-there-is-a-problem-with-the-resource-you-are-looking-for-and-it?forum=operationsmanagerreporting
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Please help: deploy Bean with "No resource available" error for M:N relationship

Hi all,
I wonder any one comes across with deploying beans with M:N relationship with
"No resource available".
I defined the relationship in ejb-jar.xml and dbms in the
weblogic-cmp-rdbms-jar.xml, but when I deployed the beans I got
the following error
------ Error message-----
weblogic.common.ResourceException: No resources available at weblogic.common.internal.ResourceAllocator.reserve(ResourceAllocator.
java:568) at weblogic.common.internal.ResourceAllocator.reserve(ResourceAllocator.
java:400) at weblogic.common.internal.ResourceAllocator.reserveNoWait(ResourceAllo
cator.java:368) at weblogic.jdbc.common.internal.ConnectionPool.reserve(ConnectionPool.j
ava:166) at weblogic.jdbc.common.internal.ConnectionPool.reserveNoWait(Connection
Pool.java:127) at weblogic.jdbc.common.internal.RmiDataSource.getPoolConnection(RmiData
Source.java:194) at weblogic.jdbc.common.internal.RmiDataSource.getConnection(RmiDataSour
ce.java:219) at weblogic.ejb20.cmp.rdbms.RDBMSPersistenceManager.getConnection(RDBMSP
ersistenceManager.java:317) at weblogic.ejb20.cmp.rdbms.RDBMSPersistenceManager.createDefaultDBMSTab
le(RDBMSPersistenceManager.java:1149) at weblogic.ejb20.utils.TableVerifier.verifyTableExistsAndCreateMaybe(Ta
bleVerifier.java:428) at weblogic.ejb20.cmp.rdbms.RDBMSPersistenceManager.verifyTablesExist(RD
Unable to deploy EJB: CustomerBean from \ejb:
Errors encountered ''The Container-Managed Persistence Entity EJB failed while
creating its SQL Type Map. The error was: Invalid object name 'localcustomer_localsubscription'.
Severity 16, State 1, Procedure 'IVM_SERVER null', Line 1', 'Error encountered
while attempting to create Default DBMS Table: 'localcustomer_localsubscription'.
Error Text: 'weblogic.common.ResourceException: No resource s available'.''
---------------End error ----------------------
---------------my ejb-jar.xml
<ejb-jar>
- <enterprise-beans>
- <entity>
<ejb-name>AddressBean</ejb-name>
<local-home>customer.LocalAddressHome</local-home>
<local>customer.LocalAddress</local>
<ejb-class>customer.AddressBean</ejb-class>
<persistence-type>Container</persistence-type>
<prim-key-class>java.lang.String</prim-key-class>
<reentrant>False</reentrant>
- <cmp-field>
<field-name>addressID</field-name>
</cmp-field>
- <cmp-field>
<field-name>street</field-name>
</cmp-field>
- <cmp-field>
<field-name>city</field-name>
</cmp-field>
- <cmp-field>
<field-name>zip</field-name>
</cmp-field>
- <cmp-field>
<field-name>state</field-name>
</cmp-field>
<primkey-field>addressID</primkey-field>
</entity>
- <entity>
<ejb-name>CustomerBean</ejb-name>
<local-home>customer.LocalCustomerHome</local-home>
<local>customer.LocalCustomer</local>
<ejb-class>customer.CustomerBean</ejb-class>
<persistence-type>Container</persistence-type>
<prim-key-class>java.lang.String</prim-key-class>
<reentrant>False</reentrant>
<abstract-schema-name>CustomerBean</abstract-schema-name>
- <cmp-field>
<field-name>customerID</field-name>
</cmp-field>
- <cmp-field>
<field-name>firstName</field-name>
</cmp-field>
- <cmp-field>
<field-name>lastName</field-name>
</cmp-field>
<primkey-field>customerID</primkey-field>
- <query>
- <query-method>
<method-name>findByLastName</method-name>
- <method-params>
<method-param>java.lang.String</method-param>
</method-params>
</query-method>
- <ejb-ql>
- <![CDATA[ SELECT OBJECT(o) FROM CustomerBean AS o
]]>
</ejb-ql>
</query>
- <query>
- <query-method>
<method-name>findByFirstName</method-name>
- <method-params>
<method-param>java.lang.String</method-param>
</method-params>
</query-method>
- <ejb-ql>
- <![CDATA[ SELECT OBJECT(o) FROM CustomerBean AS o
]]>
</ejb-ql>
</query>
</entity>
- <entity>
<ejb-name>SubscriptionBean</ejb-name>
<local-home>customer.LocalSubscriptionHome</local-home>
<local>customer.LocalSubscription</local>
<ejb-class>customer.SubscriptionBean</ejb-class>
<persistence-type>Container</persistence-type>
<prim-key-class>java.lang.String</prim-key-class>
<reentrant>False</reentrant>
<abstract-schema-name>SubscriptionBean</abstract-schema-name>
- <cmp-field>
<field-name>type</field-name>
</cmp-field>
- <cmp-field>
<field-name>title</field-name>
</cmp-field>
<primkey-field>title</primkey-field>
- <query>
- <query-method>
<method-name>findAllSubscriptions</method-name>
<method-params />
</query-method>
- <ejb-ql>
- <![CDATA[ SELECT OBJECT(o) FROM SubscriptionBean AS o
]]>
</ejb-ql>
</query>
</entity>
</enterprise-beans>
- <relationships>
- <ejb-relation>
<ejb-relation-name>LocalCustomer-LocalAddress</ejb-relation-name>
- <ejb-relationship-role>
<ejb-relationship-role-name>LocalCustomer-Has-LocalAddresss</ejb-relationship-role-name>
<multiplicity>one</multiplicity>
- <relationship-role-source>
<ejb-name>CustomerBean</ejb-name>
</relationship-role-source>
- <cmr-field>
<cmr-field-name>addresses</cmr-field-name>
<cmr-field-type>java.util.Collection</cmr-field-type>
</cmr-field>
</ejb-relationship-role>
- <ejb-relationship-role>
<ejb-relationship-role-name>LocalAddress-Has-LocalCustomer</ejb-relationship-role-name>
<multiplicity>many</multiplicity>
- <relationship-role-source>
<ejb-name>AddressBean</ejb-name>
</relationship-role-source>
- <cmr-field>
<cmr-field-name>customer</cmr-field-name>
</cmr-field>
</ejb-relationship-role>
</ejb-relation>
- <ejb-relation>
<ejb-relation-name>LocalCustomer-LocalSubscription</ejb-relation-name>
- <ejb-relationship-role>
<ejb-relationship-role-name>LocalCustomers-Have-LocalSubscriptions</ejb-relationship-role-name>
<multiplicity>many</multiplicity>
- <relationship-role-source>
<ejb-name>CustomerBean</ejb-name>
</relationship-role-source>
- <cmr-field>
<cmr-field-name>subscriptions</cmr-field-name>
<cmr-field-type>java.util.Collection</cmr-field-type>
</cmr-field>
</ejb-relationship-role>
- <ejb-relationship-role>
<ejb-relationship-role-name>LocalSubscriptions-Have-LocalCustomers</ejb-relationship-role-name>
<multiplicity>many</multiplicity>
- <relationship-role-source>
<ejb-name>SubscriptionBean</ejb-name>
</relationship-role-source>
- <cmr-field>
<cmr-field-name>customers</cmr-field-name>
<cmr-field-type>java.util.Collection</cmr-field-type>
</cmr-field>
</ejb-relationship-role>
</ejb-relation>
</relationships>
- <assembly-descriptor>
- <container-transaction>
- <method>
<ejb-name>AddressBean</ejb-name>
<method-name>*</method-name>
</method>
<trans-attribute>Required</trans-attribute>
</container-transaction>
- <container-transaction>
- <method>
<ejb-name>CustomerBean</ejb-name>
<method-name>*</method-name>
</method>
<trans-attribute>Required</trans-attribute>
</container-transaction>
- <container-transaction>
- <method>
<ejb-name>SubscriptionBean</ejb-name>
<method-name>*</method-name>
</method>
<trans-attribute>Required</trans-attribute>
</container-transaction>
</assembly-descriptor>
</ejb-jar>
------------------End of ejb-jar.xml---------------
Please help
Thanks in advance
Mike

Hi Gaurav,
Other applications used the same the datasource, which I used for this application,
are running fine.
I think there is some bug in the wlserver 6.1 to create the join table. I think
it is the time I should ask the bea wlserver 6.1.
Mike
"Gaurav Khanna" <[email protected]> wrote:
This implies that there are no database connections available. You need
to
check if you can log into your database instance. By default there are
30
connections specified for an instance in Oracle. FYI.
"Mike" <[email protected]> wrote in message
news:[email protected]...
Hi all,
I wonder any one comes across with deploying beans with M:Nrelationship with
"No resource available".
I defined the relationship in ejb-jar.xml and dbms in the
weblogic-cmp-rdbms-jar.xml, but when I deployed the beans I got
the following error
------ Error message-----
weblogic.common.ResourceException: No resources available atweblogic.common.internal.ResourceAllocator.reserve(ResourceAllocator.
java:568) atweblogic.common.internal.ResourceAllocator.reserve(ResourceAllocator.
java:400) atweblogic.common.internal.ResourceAllocator.reserveNoWait(ResourceAllo
cator.java:368) atweblogic.jdbc.common.internal.ConnectionPool.reserve(ConnectionPool.j
ava:166) atweblogic.jdbc.common.internal.ConnectionPool.reserveNoWait(Connection
Pool.java:127) atweblogic.jdbc.common.internal.RmiDataSource.getPoolConnection(RmiData
Source.java:194) atweblogic.jdbc.common.internal.RmiDataSource.getConnection(RmiDataSour
ce.java:219) atweblogic.ejb20.cmp.rdbms.RDBMSPersistenceManager.getConnection(RDBMSP
ersistenceManager.java:317) atweblogic.ejb20.cmp.rdbms.RDBMSPersistenceManager.createDefaultDBMSTab
le(RDBMSPersistenceManager.java:1149) atweblogic.ejb20.utils.TableVerifier.verifyTableExistsAndCreateMaybe(Ta
bleVerifier.java:428) atweblogic.ejb20.cmp.rdbms.RDBMSPersistenceManager.verifyTablesExist(RD
Unable to deploy EJB: CustomerBean from \ejb:
Errors encountered ''The Container-Managed Persistence Entity EJB failedwhile
creating its SQL Type Map. The error was: Invalid object name'localcustomer_localsubscription'.
Severity 16, State 1, Procedure 'IVM_SERVER null', Line 1', 'Errorencountered
while attempting to create Default DBMS Table:'localcustomer_localsubscription'.
Error Text: 'weblogic.common.ResourceException: No resource savailable'.''
---------------End error ----------------------
---------------my ejb-jar.xml
<ejb-jar>
- <enterprise-beans>
- <entity>
<ejb-name>AddressBean</ejb-name>
<local-home>customer.LocalAddressHome</local-home>
<local>customer.LocalAddress</local>
<ejb-class>customer.AddressBean</ejb-class>
<persistence-type>Container</persistence-type>
<prim-key-class>java.lang.String</prim-key-class>
<reentrant>False</reentrant>
- <cmp-field>
<field-name>addressID</field-name>
</cmp-field>
- <cmp-field>
<field-name>street</field-name>
</cmp-field>
- <cmp-field>
<field-name>city</field-name>
</cmp-field>
- <cmp-field>
<field-name>zip</field-name>
</cmp-field>
- <cmp-field>
<field-name>state</field-name>
</cmp-field>
<primkey-field>addressID</primkey-field>
</entity>
- <entity>
<ejb-name>CustomerBean</ejb-name>
<local-home>customer.LocalCustomerHome</local-home>
<local>customer.LocalCustomer</local>
<ejb-class>customer.CustomerBean</ejb-class>
<persistence-type>Container</persistence-type>
<prim-key-class>java.lang.String</prim-key-class>
<reentrant>False</reentrant>
<abstract-schema-name>CustomerBean</abstract-schema-name>
- <cmp-field>
<field-name>customerID</field-name>
</cmp-field>
- <cmp-field>
<field-name>firstName</field-name>
</cmp-field>
- <cmp-field>
<field-name>lastName</field-name>
</cmp-field>
<primkey-field>customerID</primkey-field>
- <query>
- <query-method>
<method-name>findByLastName</method-name>
- <method-params>
<method-param>java.lang.String</method-param>
</method-params>
</query-method>
- <ejb-ql>
- <![CDATA[ SELECT OBJECT(o) FROM CustomerBean AS o
]]>
</ejb-ql>
</query>
- <query>
- <query-method>
<method-name>findByFirstName</method-name>
- <method-params>
<method-param>java.lang.String</method-param>
</method-params>
</query-method>
- <ejb-ql>
- <![CDATA[ SELECT OBJECT(o) FROM CustomerBean AS o
]]>
</ejb-ql>
</query>
</entity>
- <entity>
<ejb-name>SubscriptionBean</ejb-name>
<local-home>customer.LocalSubscriptionHome</local-home>
<local>customer.LocalSubscription</local>
<ejb-class>customer.SubscriptionBean</ejb-class>
<persistence-type>Container</persistence-type>
<prim-key-class>java.lang.String</prim-key-class>
<reentrant>False</reentrant>
<abstract-schema-name>SubscriptionBean</abstract-schema-name>
- <cmp-field>
<field-name>type</field-name>
</cmp-field>
- <cmp-field>
<field-name>title</field-name>
</cmp-field>
<primkey-field>title</primkey-field>
- <query>
- <query-method>
<method-name>findAllSubscriptions</method-name>
<method-params />
</query-method>
- <ejb-ql>
- <![CDATA[ SELECT OBJECT(o) FROM SubscriptionBean AS o
]]>
</ejb-ql>
</query>
</entity>
</enterprise-beans>
- <relationships>
- <ejb-relation>
<ejb-relation-name>LocalCustomer-LocalAddress</ejb-relation-name>
- <ejb-relationship-role>
<ejb-relationship-role-name>LocalCustomer-Has-LocalAddresss</ejb-relationshi
p-role-name>
<multiplicity>one</multiplicity>
- <relationship-role-source>
<ejb-name>CustomerBean</ejb-name>
</relationship-role-source>
- <cmr-field>
<cmr-field-name>addresses</cmr-field-name>
<cmr-field-type>java.util.Collection</cmr-field-type>
</cmr-field>
</ejb-relationship-role>
- <ejb-relationship-role>
<ejb-relationship-role-name>LocalAddress-Has-LocalCustomer</ejb-relationship
-role-name>
<multiplicity>many</multiplicity>
- <relationship-role-source>
<ejb-name>AddressBean</ejb-name>
</relationship-role-source>
- <cmr-field>
<cmr-field-name>customer</cmr-field-name>
</cmr-field>
</ejb-relationship-role>
</ejb-relation>
- <ejb-relation>
<ejb-relation-name>LocalCustomer-LocalSubscription</ejb-relation-name>
- <ejb-relationship-role>
<ejb-relationship-role-name>LocalCustomers-Have-LocalSubscriptions</ejb-rela
tionship-role-name>
<multiplicity>many</multiplicity>
- <relationship-role-source>
<ejb-name>CustomerBean</ejb-name>
</relationship-role-source>
- <cmr-field>
<cmr-field-name>subscriptions</cmr-field-name>
<cmr-field-type>java.util.Collection</cmr-field-type>
</cmr-field>
</ejb-relationship-role>
- <ejb-relationship-role>
<ejb-relationship-role-name>LocalSubscriptions-Have-LocalCustomers</ejb-rela
tionship-role-name>
<multiplicity>many</multiplicity>
- <relationship-role-source>
<ejb-name>SubscriptionBean</ejb-name>
</relationship-role-source>
- <cmr-field>
<cmr-field-name>customers</cmr-field-name>
<cmr-field-type>java.util.Collection</cmr-field-type>
</cmr-field>
</ejb-relationship-role>
</ejb-relation>
</relationships>
- <assembly-descriptor>
- <container-transaction>
- <method>
<ejb-name>AddressBean</ejb-name>
<method-name>*</method-name>
</method>
<trans-attribute>Required</trans-attribute>
</container-transaction>
- <container-transaction>
- <method>
<ejb-name>CustomerBean</ejb-name>
<method-name>*</method-name>
</method>
<trans-attribute>Required</trans-attribute>
</container-transaction>
- <container-transaction>
- <method>
<ejb-name>SubscriptionBean</ejb-name>
<method-name>*</method-name>
</method>
<trans-attribute>Required</trans-attribute>
</container-transaction>
</assembly-descriptor>
</ejb-jar>
------------------End of ejb-jar.xml---------------
Please help
Thanks in advance
Mike

Windows Explorer Plug-In Set-Up for BeehiveOnline with External Resources

I have watched the video on the Window Explorer Plug-In and trying to set-up so that multiple individuals can easily access files that are uploaded and make changes by checking in and out. Problem is that I do not see the Beehive Sites when I open the Oracle Beehive Extensions for Explorer. Do the Beehive Online sites with external resources use a different server name? I am logging in using the stbeehive.oracle.com Server.

Hi.
Yes, BeehiveOnline is a completely separate system so you will have to set up the account on BeehiveOnline as well as stbeehive. The limitations of the Microsoft approach is that the OBEE required one connection at a time so you will have to disconnect and reconnect to see the other server. OBEE gives you more control than normal WebDAV access but it has its limitations. If you use the Desktop Integration Server or a webDAv setup you can have both servers visible in the Explorer window and drag and drop easily between them .
Phil

Drag and Drop objects with JavaFX properties

Has anyone tried to implement drag and drop functionality with objects containing JavaFX properties? The issue I'm running into is that the objects appear to need to be serializable, and the JavaFX properties are not serializable. I can implement Externalizable instead of Serializable, and basically serialize the values contained by the FX properties, but of course I lose any bindings by doing this (as the listeners underlying the bindings are not serialized).
The [url http://docs.oracle.com/javafx/2/api/javafx/scene/input/Clipboard.html]javadocs for Clipboard state "In addition to the common or built in types, you may put any arbitrary data onto the clipboard (assuming it is either a reference, or serializable. See more about references later)" but I don't see any further information about references (and at any rate, this doesn't really make sense since anything that's serializable would be a reference anyway). Is there a special DataFormat I can use to specify a reference in the local JVM so the reference gets passed without serialization?
I know this might not make sense without a code example; I just thought someone might have come across this closely enough to recognize the problem. I'll try to post a code example tonight...

Here's pretty much the simplest example I can come up with. I have a real-world example of needing to do this, but the object model for the real example is quite a bit more complex.
For the toy example, imagine we have a list of projects, some employees, and we want to assign each project to one or more employees. I have a Project class with a title and assignee. (In real life you can imagine other properties; due date, status, etc.) I'll keep a ListView with a bunch of unassigned projects (titles but assignees equal to null) and then a ListView for each of the employees.
To assign a project to an employee, the user should be able to drag from the "master" list view to one of the employee list views. When the project is dropped, we'll create a new project, set the assignee, and bind the title of the new project to the title of the project which was dragged. (Remember we want to be able to assign a single project to multiple employees.)
So here's the first shot:
A couple of simple model classes
Project.java
import java.io.Externalizable;
import java.io.IOException;
import java.io.ObjectInput;
import java.io.ObjectOutput;
import javafx.beans.property.ObjectProperty;
import javafx.beans.property.SimpleObjectProperty;
import javafx.beans.property.SimpleStringProperty;
import javafx.beans.property.StringProperty;
public class Project {
     private final StringProperty title ;
     private final ObjectProperty<Employee> assignee ;
     public Project(String title) {
          this.title = new SimpleStringProperty(this, "title", title);
          this.assignee = new SimpleObjectProperty<Employee>(this, "assignee");
     public Project() {
          this("");
     public StringProperty titleProperty() {
          return title ;
     public String getTitle() {
          return title.get() ;
     public void setTitle(String title) {
          this.title.set(title);
     public ObjectProperty<Employee> assigneeProperty() {
          return assignee ;
     public Employee getAssignee() {
          return assignee.get();
     public void setAssignee(Employee assignee) {
          this.assignee.set(assignee);
     @Override
     public String toString() {
          String t = title.get();
          Employee emp = assignee.get();
          if (emp==null) {
               return t;
          } else {
               return String.format("%s (%s)", t, emp.getName()) ;
}Employee.java
import java.io.Externalizable;
import java.io.IOException;
import java.io.ObjectInput;
import java.io.ObjectOutput;
import javafx.beans.property.SimpleStringProperty;
import javafx.beans.property.StringProperty;
public class Employee {
     private StringProperty name ;
     public Employee(String name) {
          this.name = new SimpleStringProperty(this,"name", name);
     public StringProperty nameProperty() {
          return name ;
     public String getName() {
          return name.get();
     public void setName(String name) {
          this.name.set(name);
}and the application
DnDExample.java
import javafx.application.Application;
import javafx.beans.value.ChangeListener;
import javafx.beans.value.ObservableValue;
import javafx.collections.ObservableList;
import javafx.event.EventHandler;
import javafx.scene.Scene;
import javafx.scene.control.Label;
import javafx.scene.control.ListCell;
import javafx.scene.control.ListView;
import javafx.scene.control.TextField;
import javafx.scene.input.ClipboardContent;
import javafx.scene.input.DataFormat;
import javafx.scene.input.DragEvent;
import javafx.scene.input.Dragboard;
import javafx.scene.input.MouseEvent;
import javafx.scene.input.TransferMode;
import javafx.scene.layout.HBox;
import javafx.scene.layout.VBox;
import javafx.stage.Stage;
import javafx.util.Callback;
public class DnDExample extends Application {
     private static final DataFormat PROJECT_DATA_FORMAT = new DataFormat("com.example.project"); // is there something special I can use here?
     @Override
     public void start(Stage primaryStage) {
          final HBox root = new HBox(5);
          final ListView<Project> allProjects = new ListView<Project>();
          final Employee fred = new Employee("Fred");
          final Employee ginger = new Employee("Ginger");
          final ListView<Project> fredsProjects = new ListView<Project>();
          final ListView<Project> gingersProjects = new ListView<Project>();
          final VBox employeeLists = new VBox(5);
          employeeLists.getChildren().addAll(new Label("Fred's Projects"), fredsProjects, new Label("Ginger's Projects"), gingersProjects);
          root.getChildren().addAll(allProjects, employeeLists);
          allProjects.setCellFactory(new Callback<ListView<Project>, ListCell<Project>>() {
               @Override
               public ListCell<Project> call(ListView<Project> listView) {
                    return new AllProjectListCell();
          allProjects.setEditable(true);
          final EventHandler<DragEvent> dragOverHandler = new EventHandler<DragEvent>() {
               @Override
               public void handle(DragEvent dragEvent) {
                    if (dragEvent.getDragboard().hasContent(PROJECT_DATA_FORMAT)) {
                         dragEvent.acceptTransferModes(TransferMode.COPY);
          fredsProjects.setOnDragOver(dragOverHandler);
          gingersProjects.setOnDragOver(dragOverHandler);
          fredsProjects.setOnDragDropped(new DragDropHandler(fred, fredsProjects.getItems()));
          gingersProjects.setOnDragDropped(new DragDropHandler(ginger, gingersProjects.getItems()));
          allProjects.getItems().addAll(new Project("Implement Drag and Drop"), new Project("Fix serialization problem"));
          Scene scene = new Scene(root, 600, 400);
          primaryStage.setScene(scene);
          primaryStage.show();
     public static void main(String[] args) {
          launch(args);
     private class DragDropHandler implements EventHandler<DragEvent> {
          private final Employee employee ;
          private final ObservableList<Project> itemList;
          DragDropHandler(Employee employee, ObservableList<Project> itemList) {
               this.employee = employee ;
               this.itemList = itemList ;
          @Override
          public void handle(DragEvent event) {
               Dragboard db = event.getDragboard();
               if (db.hasContent(PROJECT_DATA_FORMAT)) {
                    Project project = (Project) db.getContent(PROJECT_DATA_FORMAT);
                    Project assignedProject = new Project();
                    assignedProject.titleProperty().bind(project.titleProperty());
                    assignedProject.setAssignee(employee);
                    itemList.add(assignedProject);
     private class AllProjectListCell extends ListCell<Project> {
          private TextField textField ;
          private final EventHandler<MouseEvent> dragDetectedHandler ;
          AllProjectListCell() {
               this.dragDetectedHandler = new EventHandler<MouseEvent>() {
                    @Override
                    public void handle(MouseEvent event) {
                         Dragboard db = startDragAndDrop(TransferMode.COPY);
                         ClipboardContent cc = new ClipboardContent();
                         cc.put(PROJECT_DATA_FORMAT, getItem());
                         db.setContent(cc);
                         event.consume();
               this.setEditable(true);
          @Override
          public void updateItem(final Project project, boolean empty) {
               super.updateItem(project, empty);
               if (empty) {
                    setText(null);
                    setGraphic(null);
                    setOnDragDetected(null);
               } else if (isEditing()) {
                    if (textField != null) {
                         textField.setText(getItem().getTitle());
                    setText(null) ;
                    setOnDragDetected(null);
                    setGraphic(textField);
               } else {
                    setText(project.getTitle());
                    setOnDragDetected(dragDetectedHandler);
          @Override
          public void startEdit() {
               super.startEdit();
               if (!isEmpty()) {
                    textField = new TextField(getItem().getTitle());
                    textField.setMinWidth(this.getWidth()-this.getGraphicTextGap());
                    textField.focusedProperty().addListener(new ChangeListener<Boolean>() {
                         @Override
                         public void changed(
                                   ObservableValue<? extends Boolean> observable,
                                   Boolean oldValue, Boolean newValue) {
                              if (! newValue) {
                                   getItem().setTitle(textField.getText());
                                   commitEdit(getItem());
                    setText(null);
                    setGraphic(textField);
                    setOnDragDetected(null);
          @Override
          public void cancelEdit() {
               super.cancelEdit();
               if (!isEmpty()) {
                    setText(getItem().getTitle());
                    setGraphic(null);
                    setOnDragDetected(dragDetectedHandler);
               } else {
                    setText(null);
                    setGraphic(null);
                    setOnDragDetected(null);
          @Override
          public void commitEdit(Project project) {
               super.commitEdit(project);
               if (!isEmpty()) {
                    setText(getItem().getTitle());
                    setGraphic(null);
                    setOnDragDetected(dragDetectedHandler);
}If you try to drag from the list on the left to one of the lists on the right, it will fail pretty quickly and tell you that the data need to be Serializable.
Simply adding "implements Serializable" to the Project and Employee classes doesn't work, as you find that SimpleStringProperty and SimpleObjectProperty are not Serializable. So instead I can use Externalizable:
public class Project implements Externalizable {
@Override
     public void writeExternal(ObjectOutput out) throws IOException {
          out.writeObject(title.get());
          out.writeObject(assignee.get());
     @Override
     public void readExternal(ObjectInput in) throws IOException,
               ClassNotFoundException {
          setTitle((String)in.readObject());
          setAssignee((Employee)in.readObject());
}and
public class Employee implements Externalizable {
     @Override
     public void writeExternal(ObjectOutput out) throws IOException {
          out.writeObject(name.get());
     @Override
     public void readExternal(ObjectInput in) throws IOException,
               ClassNotFoundException {
          setName((String) in.readObject());
}This makes the drag and drop work, but if you drop a project on one of the employee lists, then edit the project title in the master list, the binding is not respected. This is because deserialization creates a new SimpleStringProperty for the title, which is not the property to which the title of the new Project object is bound.
What I really want to do is to be able to drag and drop an object within the same JVM simply by passing the object by reference, rather than by serializing it. Is there a way to do this? Is there some DataFormat type I need?

Planning on alternate resource

Hi Guys,
We have maintained main reource with non availability for 20 days.
But when system creates orders, it is placing on alternate resource considering this downtime on main resource.Means it is placing on the alternate resource before the downtimes maintained on the main resource.
All the resources are with mode priority A and no procurement priority (infinte scheduling)
My doubt is why it is placing on alternate resource considering the down times of main resource. Why it is not placing on the main resource after or before the downtimes.
How system knows that resource capcity is reached while planning?
Thanks,
Prash

Hii Prasanth,
The mode priority should be different for different modes , then only it comes alternate resources with lesser priority. Otherwise the order creates will be pick up random resource with having samemode priority .
As in your case it is A mode priority for all the resources. Might be it is taking alphabetically the first resource for all the orders you are creating manually . It uses GUID ...
But if your requirement is always to create on main resource , make it Mode priority A for that resource . and other alternate resource make mode priority B . and use the strategy in PP strategy to pick up only Mode priority A, with infinite scheduling... use current mode retain ....
Hope it'll give you proper result..
Regards
Debashis

Order not going to alternate resource after optimization

Hi all,
My requirement is order need to be scheduled on all alternate resource... and also it will adhere product sequence...
I have given cost as follows in optimization profile..
Make span=100
Setup cost=60
Mode cost=25
Cost and time i have maintained in setup matrix.
In the cost tab of optimization profile i have given A=10,B=100 as variable and 100,200 in fixed column..
Product sequence is some how adhering..but order is not going to alternate resource....
Thanks
pardeepta

Hi Pradeepta,
I Believe, that might be u r observation.
To achieve the required scenario which you have given, plz follow the below steps
1. Plz check whether u have defined mode priority in PDS or not. If not plz define.
2. After maintaining do new explosion of transaction data
3. Plz maintain the weights in basic settings of optimization profile as "make span = 0", Total setup time = 50, Total mode cost = 70,
4. In Cost tab maintain fixed mode cost as A = 10, B = 12, C = 14 etc (In multiples of 2)
When you try this example ensure that u have 1 and half day load & give scheduling horizon as 1 day while optimization for the resources A, B & C.
System will schedule on Primary resource A first then it willl schedule on alternate resource B. If resource B is also full then only it schedule on resource C.
Note: If you define make span, then system will thing that you want to produce ASAP and results will be accordingly. make span has no relation with mode priority.
Regards
Sravan Maturu

Alternate resources

Hi all,
I have to create a PPM with alternate modes. I can do it in APO. But not sure how to make setups in R3 PP-PI. Main proble,I feel, I am not sure how to set up alternate resources in a Recipe.
Thanks in advance
Vard

Hi Vard,
Simple steps,
Create a characteristics eg.color_char (Values : red)
Create a class with type 19 (Workcentre class type) eg. color_class, assign Color_char here.
Create 3 resources, classify them with class color_class assign the value 'Red' for all 3 of them.
Create a recipe, classify the operation (double click on the classification indicator) with the class color_class enter the valus 'Red' here too...! create required phases..!
Now CIF this PPM , you will see all the 3 resources as alternatives in APO for the phases..!
Hope this helps.
Regards,
Mahesh

Provisioning a user with a resource automatically doesn't work!!

Hi Experts – IHAC trying to configure OIM to provisioning a user with a resource automatically (via OID connector).
As reviewed, the membership rules (rules designer) and access policies already configured with correct param. So I would say everything should work fine.
But when they create a new user with proper attribute. The resource didn’t perform an automate process as expected.
In the log file show only 2 lines of error message.
<Apr 25, 2013 2:49:46 PM ICT> <Warning> <oracle.iam.callbacks.common> <IAM-2030146> <[CALLBACKMSG] Are applicable policies present for this async eventhandler ? : false>
<Apr 25, 2013 2:49:47 PM ICT> <Warning> <oracle.iam.callbacks.common> <IAM-2030146> <[CALLBACKMSG] Are applicable policies present for this async eventhandler ? : false>
However, manual add resource works well.
Environment Info:
- OIM 11gR1 (BP6)
- OID Connector 9.1
- AIX 7.1
Is this consider as bug on AIX platform ? Or any inputs would appreciated.

Just check if the rule satisfy, user is getting the role.
--Hari

Everytime I open Safari on my MacBook Pro a pop-up window from my Finder menu, with the Applications highlighted on the left in the favorites column with the Resources folder highlighted comes up and locks my Safari page until I manually close the Resourc

Everytime I open Safari on my MacBook Pro a pop-up window from my Finder menu, with the Applications highlighted on the left in the favorites column with the Resources folder highlighted comes up and locks my Safari page until I manually close the Resources window then I have to refresh the internet search address line at the top of Safari. Can someone tell me how to stop this. It started after a software upgrade. It didn’t do that before. Thank you.

A few thoughts for diagnosis/testing purposes:
Have you recently run the disk utility and repaired HD and permissions? If not do so.
Boot into the Safe mode - hold down shift key on boot - and see if the problems are still there. Some functions won't work but see if anything odd happens.
Check your startup items. Get rid of them temporarily.
Create a new user account and see if the problems occur with the new account.
Lastly, be sure your backup is up-to-date.

HT4623 I am trying to update my i-phone 4 with IOS 7.1.1 it has twice got 400mB in to the 1.3GB update and then dropped out with an "error has occured" message.....any ideas?

I-phone 4........I am being auto-prompted to update my IOS from 7.1 to 7.1.1. Each time I try to do that on i-tunes it gets to about 400Mb of the 1.3Mb file and then drops out with an "error has occured" message. I have 5Gb free space on the phone. I have tried to do that wirelessly also and it says "an error has occured while checking for a software update"........does anyone have any ideas?....thanx

Dear Jody..jone5
Good for you that can't update your iphone because I did it and my iphone dosen't work for example I can't download any app like Wecaht or Twitter..
Goodluck
Atousa

Excel cannot complete this task with available resources

Hello all,
I am having a puzzling problem with some Excel 2010 users.
One person in Finance is having problems with excel in general, the others are having problems with a specific spreadsheet.
The specific spreadsheet is very large, 250mb, and contains a lot of data. They're trying to update a specific pivot table within this sheet but every time they try to refresh the data they get the message "Excel cannot complete this task with available
resources". I have also replicated the problem on my PC.
All PC's have 4GB of RAM available. I closed all programs, opened the sheet again, refreshed the pivot table and still received the same error.
Now, one person in the department was able to open the sheet, refresh the pivot table and save it with no problems. They have the same spec machine as the others in the Finance department.
All users have rebooted their machines, I've checked the server where the saved files sit to make sure there are no problems, I've asked them to check all data sources within the spreadsheet, watched RAM usage during the operation and while it is high, it
doesn't max out. Before finding out that one person can open it, I thought it could be that the file had become corrupted in some way.
It's very puzzling as I cannot see any logical reason why four people cannot use this sheet but one can. Any help or suggestions would be greatly appreciated.

Hi
MrBeardyDrummer,
Since you got the error message "Excel cannot complete this task with available resources. Choose less data or close other applications."
when opened the Excel, please try the follow this KB to fix the issue.
http://support.microsoft.com/kb/2655178
You can also refer to these.
http://support.microsoft.com/kb/2779852
http://blogs.technet.com/b/the_microsoft_excel_support_team_blog/archive/2012/05/22/quot-excel-cannot-complete-this-task-with-available-resources-quot-after-installing-ms12-030.aspx
If there is anything I can do for you regarding this issue, feel free to post back.
Best regards,
Greta Ge
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

How to Code SWFObject with Alternate Content

I've read umpteen tutorials and articles on embedding Flash
with alternate content, and they're all too different, confusing,
and unsuccessful. All I want to do is insert a JPEG to replace my
Flash movie on non-Flash browsers but have no idea how or where to
code it. I don't want to get into xml or div IDs (if I don't have
to)... just a simple-as-possible, idiot-proof solution for a
beginner like myself.
Here is my Flash object...
<td width="400" height="240">
<object
classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" codebase="
http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=6,0,0,0"
height="240" width="400">
<param name="movie" value="images/flashintro.swf" />
<param name="quality" value="best" />
<param name="play" value="true" />
<embed height="240" pluginspage="
http://www.macromedia.com/go/getflashplayer"
src="images/flashintro.swf" type="application/x-shockwave-flash"
width="400" quality="best" play="true"></embed>
</object>
</td>
Thanks.

docmentation:
http://code.google.com/p/swfobject/
AIR app that generates it for you:
http://code.google.com/p/swfobject/downloads/list
The body code will look like something like this:
<div id="flashContent">
<center><p>Please update to the latest version
of <a href="
http://www.adobe.com/shockwave/download/index.cgi?P1_Prod_Version=ShockwaveFlash"
target="_blank" title="Flash Player">FLASH</a>, and enable
<a href="
http://gsaauctions.gov/brow_details/IE6instr.htm"
title="Enable Javascript"
target="_blank">JAVASCRIPT</a><br /> or view site as
<a
href="index2.php">HTML</a></p></center></div>
<script type="text/javascript">
// <![CDATA[var so = new SWFObject("flash.swf", "mymovie",
"950", "600", "8", "#FFFFFF");
so.write("flashContent");
</script>

ASCP Legacy Collections Dropping Routings with Alternate Resources

Similar Messages

Maybe you are looking for