ASDM demo mode in Windows 7?

I downloaded and installed asdm-demo-631.msi. At the startup prompt, it says Cisco ASDM-IDM Launcher. I click Run in Demo Mode, but it errors out saying "Demo software is not installed. Please install demo software from http://www.cisco.com/pcgi-bin/tablebuild.pl/asa". This is on Win7 64bit. See attached. Any ideas?

Hello,
This is a bug in the ASDM 6.3.1 please use ASDM 6.3.3 for the fix for this issue.
You can download from
http://tools.cisco.com/support/downloads/go/ImageList.x?relVer=6.3.3&mdfid=279916878&sftType=Adaptive+Security+Appliance+%28ASA%29+Device+Manager&optPlat=&nodecount=2&edesignator=null&modelName=Cisco+ASA+5520+Adaptive+Security+Appliance&treeMdfId=268438162&treeName=Security&modifmdfid=null&imname=&hybrid=Y&imst=N&lr=Y
Thanks,
--Sunil

Similar Messages

I create a CNiGraph control dynamically, But why havent I seen the Demo Mode Message Window?

I am a licenced user of Mesurement Studio. I create a CNiGraph control dynamically. All work well.
Then I copied my source code to another PC, I run "regsvr32 cwui.ocx", I found I can compile my source code on that computer, without any message box.
But some people said that there will be a Demo Mode Message box.
That's to say, any one can copy my source code to other computer and compile it well, then how can I protect my right?
On what condition the Demo Mode Message Box will appear? I want it to show up when others use my code.

It sounds like you were expecting the message box to come up at compile-time. Is that correct? If so, that is not expected and should not ever happen - the message box that you're referring to should not come up until you actually run the application. However, if you're dynamically creating the control and you are specifying the license string at creation time in your code, I expect it would still work when you take the code to another machine. Could you please reply with more information about what you're trying to do and how you expect this to work? Thanks.
- Elton

Adobe Creative Cloud on Windows + Adobe Acrobat - Keeps going into Demo mode

Hi,
Not sure my subject line is accurate, but here's my situation.
I have Adobe Creative Cloud - Student Membership.
I have it installed on my Macbook Pro on both the Mac OS X 10.9.2 and Windows 8.1 (Boot Camp) side.
So this counts as two computers... I have not installed it on any other computer. Nor have I attempted to sign in to it on any other computer.
On the Mac side everything is fine.
On the Windows side... Creative Cloud refuses to stay signed in. Now, I don't mind clicking sign in and typing my password... it's annoying, but fine... I'll deal with it.
What I do mind... is Acrobat closing after about 30-45 seconds while I'm in the middle of doing something. I'll have set everything up and then bam the window closes, no warnings, no requests to save... NOTHING...
So, I'll do it again... and again... it'll happen. Eventually it asks me to sign back in and then I'm good for a while. But it reverts to Demo mode saying I have no trial days left. But, I'm a paying member!!!! I shouldn't have to a) log in every day (or sometimes several times a day) or b) have my program literally close without warning while I'm working in it - and sometimes not being able to save the work I just did - and twice already stuff that I CAN'T get back (luckily nothing critical yet).
Now the shutting down/closing issue seems to be only Acrobat. The other apps seem to behave as long as I log in with the Creative Cloud systray app.
Any suggestions???
Thanks!

MaxSvedlove please see You are no longer signed into your Creative Cloud applications - http://helpx.adobe.com/creative-cloud/kb/unable-login-creative-cloud-248.html for information on how to resolve your sign in difficulties.

ASDM 6.0(.2) & demo mode.

Hi all,
I have a question related to ASDM 6.0.2 running in demo mode.
I can browse and configure parameters in ASDM and apply it.
But if I configure SSL VPN how can I test
it? How can I test configuration of AnyConnect? I see that I connect into localhost:55000 but where are changes applied?
BR
jl

There is no limitation in fuctionality for ASDM running in demo mode. For checking the configuration of SSL vpn or Anyconnect vpn the best way is to use a client to connect to the device after the configuration is applied to the device. To load the configuration to the ASDM demo, you have to copy it to the ASDM demo directory. When pushing configuration to the config, you have to manually copy the commands to the config file in the proper section.

ASDM in demo mode

I downloaded the asdm-demo-702.msi file and installed it, but when I attempt to launch it using "Run in Demo Mode", I get the following error message:
What am I doing wrong?
- Omar

u just need to download and install asdm-demo-711.msi
http://software.cisco.com/download/release.html?mdfid=279513399&softwareid=280775064&release=7.1.1&flowid=4389

How to enable kiosk mode on windows 7

hi
How to enable kiosk mode on windows 7 ?
i need to a sample that when windows be load Disable below things
Task Manager
Driver
Task Bar
Combine Keys for example (Alt + Tab , Alt + F4 and ....)
please help me for solve it
it's urgent
thanks

Hi vahidbakhtiary,
As the reply from Monkeyboy, you could modify registry settings on systems to achieve what you want. There are many demo code online which showed us how to modify registry settings.
hi
How to enable kiosk mode on windows 7 ?
i need to a sample that when windows be load Disable below things
Task Manager
Driver
Task Bar
Combine Keys for example (Alt + Tab , Alt + F4 and ....)
please help me for solve it
it's urgent
thanks
These options might be dangerous. If someone who knew nothing about the program with this function and he uses this program, it might hurt his system. Since this, it would be better not to post this code in the forum to avoid someone tried the code and hurt
his system.
Thanks for your understanding.
Best Regards,
Edward
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click HERE to participate the survey.

Text Entry fields in Training mode to Typing field in Demo mode

My SME has decided she doesn't want the learners to actually type in a bunch of fields in the Training sim I'm making and instead wants them to be shown the fields being filled in for them, like the way Captivate does in Demo mode. Is there a way to quickly and easily change Text Entry fields in a Training sim to the Typing format from Demo mode? Does that even make sense? HELP! I'm using Captivate 4 and will be outputing to Flash to embed into an Articulate presentation. Thanks!

Hi there
Probably the best you can hope for is to copy the text to the Windows Clipboard. Then delete the Text Entry Box object and insert a Text Animation. You have two to choose from for just basic typing.
Typing Text
Typing Text with Sound
Then you would paste the copied text as the text to be typed and configure the font characteristics as necessary.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

JInternalFrame Full Screen Exclusive mode lag Windows 7?

Hi everyone I'm not sure if i'm posting this question in the right category so feel free to move it. I recently have been playing around with full screen exclusive mode and JInternalFrames. Now what iv'e noticed is on every platform i've tried it works fine. When clicking and dragging the JInternalFrame to a new location it is quick and responsive. However when doing this same operation in Windows 7 the JInternalFrame lags significantly behind the mouse location as i'm dragging the internal frame. I haven't had a chance to test this on any other Windows platforms such as Vista or XP but I don't think it happens on those platforms, at least I don't remember this ever happening when I had Windows Vista and it doesn't occur in Mac OS 10.6.
The following are the circumstances i've found that produce this problem:
*1. The program is set to Full Screen Exclusive mode.*
*2. You are using Windows 7 (possibly other Windows platforms)*
*3. Click and drag a JInternalFrame to a new location.*
I've tried several things to see if it fixes the problem such as setting the look and feel to cross platform but nothing helps. In fact when the LAF is set to cross platform it is even worse.
Now i'm new to Full Screen Exclusive mode so i'm guessing (hoping) this is a problem caused by an error on my part. Here is the source code, i'd appreciate it if you give it a try. My question is how do I fix this lag so that the JInternalFrame is quick and responsive to the user dragging the window and i'm also wondering if this only happens on Windows 7 so if anyone could also tell me if they experience the problem I am describing and the OS you are using that would be great. Thank you guys :)
Also any input about wether i'm setting up full screen exclusive mode correctly would be much appreciated too.
package lag;
import java.awt.event.*;
import java.awt.*;
import javax.swing.*;
public class InternalFrameLag
 public static void main(String[] args) {
 SwingUtilities.invokeLater( new Runnable() {
 public void run() {
 new InternalFrameLag();
 GraphicsEnvironment env = GraphicsEnvironment.getLocalGraphicsEnvironment();
 GraphicsDevice[] devices = env.getScreenDevices();
 GraphicsDevice device;
 JFrame frame = new JFrame("Internal Frame Lag");
 JDesktopPane pane = new JDesktopPane();
 JInternalFrame internalFrame = new JInternalFrame("Internal Frame", true, true, true, true);
 JButton exit = new JButton("Exit");
 public InternalFrameLag() {
 frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
 frame.setUndecorated(true);
 exit.addActionListener(new ActionListener() {
 public void actionPerformed(ActionEvent e) {
 System.exit(0);
 exit.setPreferredSize(new Dimension(250,23));
 internalFrame.setLayout(new FlowLayout());
 internalFrame.setBounds(100,100,500,300);
 internalFrame.add(exit);
 pane.add(internalFrame);
 frame.add(pane);
 // get device that supports full screen
 for(int i = 0; i<devices.length; i++) {
 if(devices.isFullScreenSupported()) {
device = devices[i];
break;
if(device!=null) {
device.setFullScreenWindow(frame);
internalFrame.setVisible(true);
} else {
System.exit(0);
Edit: Decided to make the font size bigger. Eyestrain is killing me.

Darryl Burke wrote:
neptune692 wrote:

Edit: Decided to make the font size bigger. Eyestrain is killing me.Hopefully that will carry over to my response and I won't have to edit to add it ;)
I don't see the lag you describe. There's some flicker when moving the internal frame around rapidly (it looks as if the borders follow the content a split second later, but can't be caught in a screen capture) but that's no different when I show the internal frame in a normal (not full screen) window.
<tt>Microsoft Windows [Version 6.1.7600]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Users\Darryl>java -version
java version "1.6.0_17"
Java(TM) SE Runtime Environment (build 1.6.0_17-b04)
Java HotSpot(TM) Client VM (build 14.3-b01, mixed mode, sharing)</tt>
dbThanks for your reply and thanks for testing out my code. Could this lag be something wrong with my VM on Windows 7, cause the lag is extremely bad as in it takes a couple seconds for the internal frame to catch up with the mouse. I also just noticed that any other components in full screen exclusive mode on Windows 7 lag as well. Such as scrolling though a large amount of text, the scroll bar will lag far behind the mouse location and take a couple of seconds to catch up even when the mouse is moving fairly slow. I was hoping it was something in the code I was doing wrong but I guess not? Any suggestions on how I could fix this problem? It really makes my applications appear sluggish. For example when you click on a normal window such as in Windows Explorer and drag it to a new location the mouse stays in a fixed position on the window while you are dragging it. However with this lag the mouse appears to be "detatched" from the window and does not stay in the same location on the window while dragging. Does anyone else experience this or is this normal? I'm using Windows 7 64bit but I don't think that would make any difference. I'd also like to point out that I'm using Java 6 update 21 I don't know if that would make a difference opposed to update 17.
Thanks again.
Edited by: neptune692 on Oct 2, 2010 10:23 AM

How can I install photoshop cc on demo mode that was accicedentally uninstalled?

How can I install photoshop cc on demo mode that was accicedentally uninstalled?. When I try do do it, on adobe creative cloud appears as installed and there is no way to eliminate. Thank you.

Hi Ernesto Quino,
Puedes ingresar en www.creative.adobe.com e iniciar sesión con su ID de Adobe y haga clic en la pestaña 'Descargar'.
Usted encontrará la opción para descargar Photoshop CC.
gracias
Kapil

Error - iTunes Library .iti file is locked on a disk or you do not have permission for this file. I can open itunes in the compatibility mode for Windows XP Service Pack 3 ???

In Windows 8 I received the error iTunes Library .iti file is locked on a disk or you do not have permission for this file. I can open itunes in the compatibility mode for Windows XP Service Pack 3.
I've tried changing permissions and sharing - nothing seems to work. mat be a Windows 8 issue???

You also need to make sure you have both read and write permission for the file, or for the whole iTunes folder for that matter. That's also done in Get Info for the file or folder concerned.
Read the part about changing permissions on the iTunes folder in: https://discussions.apple.com/message/11583914

In XP Mode on Windows 7, after installing application as like I would normally on an actual XP system, application will not start in windows XP mode itself.

Just did a clean install of windows 7. I then downloaded windows XP mode and Windows Virtual Mode. Everything ran flawlessly and everything is updated. I needed to Install a program called Dentrix 10.5 which can only be installed on Windows
XP for numerous reasons and one including it needing to use Microsoft .NET 1.0. I installed this program on Windows XP Mode as I would as if I were installing it with a computer with windows XP. The Install of the program went fine and completed.
Still being in Windows XP Mode I wanted to see how it would run. I hit Start Menu, All Programs, Startup Programs, and clicked on the Dentrix Application. Once I clicked it the time glass on the mouse was there for a few seconds and
then went away without the application starting up at all. One thing that I'm thinking is why after I clicked Start Menu, All programs, is why was Dentrix not in its own folder and instead in the Startup programs after All programs? Any Ideas how
to get the program to run? Like I said, I am trying to run the program in Windows XP Mode and not Windows 7 as I have found many Q's and A's on only how to do that. Also this is the second application which I downloaded and the first being Microsoft
Security Essentials so I know I don't have some virus from keeping from opening the Dentrix Application. Incase you are wondering the Microsoft Security Essentials opens and runs fine in Windows XP Mode. So Pretty Much My Main question is: Why
my application not starting up in Windows XP Mode? Any help is greatly appreciated!

Once I clicked it the time glass on the mouse was there for a few seconds and then went away without the application starting up at all.
A couple times a week I open Dentrix 11.0 in a virtual machine on Windows 7. I experience the same thing almost every time I open the VM. I must first get Windows to "reconnect" my network for me. Do this by opening Start | My Computer, and
double-click on the mapped network drive leading to the Dentrix data. After I can see the Dentrix data drive, Dentrix will be able to read it too and will open correctly.
In Dentrix, seeing nothing (or briefly seeing a hourglass and then seeing nothing) is a classic sign that either:
- The database files are marked as Read Only
- The program cannot access the data files (probably the folder it is pointed to does not contain any data).
- Or possibly the database path does not point to the right location where the data files are located
Open the folder where you installed the program files of Dentrix (probably c:\program files\dentrix\) and double-click to run EP.EXE. The database path will be revealed. You can "Browse" to the correct location, and "OK" through the dialog to
close them. Then try opening Dentrix again.
Should that not work, open Start | My Computer, and try to open the path (starting with the drive letter, then the folder structure you saw in EP.EXE).
By the way, if your path uses UNC (starting with two back-slashes and then the computer name of the server), you'll need to map a network drive and replace your path with a mapped drive path. (Map a drive in Start | My Computer | Tools | Map Network
Drive). Dentrix really doesn't like UNC paths.
Dentrix 10.5 can only be installed on Windows XP
Microsoft .NET 1.0
Just FYI, Microsoft .Net Framework 1.0 is required only for the "Time Clock" feature of Dentrix. Windows 7 already has .NET Framework features up to version 3.5 built in, and Time Clock (in my experience) works great under Windows 7 without installing
.NET 1.0.
Have you tried installing directly in Windows 7? I have a specific reason why I don't (I have a newer version of Dentrix installed on my Win 7 machine, and use the VM to go back to an older database occasionally - so I can't mix two different program versions
on the same machine). If you were to try installing this program under Windows 7 directly, Dentrix will launch the Microsoft .NET Framework install after the Dentrix install is completed. Just cancel out at that point (Windows will probably give you an "incompatibility"
error message anyway before allowing the install to go through) and I believe you can run it under Windows 7. That might eliminate the networking-through-the-VM issue. So, if you have no other reason not to install Dentrix on your Windows 7 machine directly,
I'd try it. You might be surprised and if it works, you'd save yourself some headache with connecting the to network through the virual machine.
Is why was Dentrix not in its own folder and instead in the Startup programs after All programs?
During the installation, on the Select Program Folder screen, you must have clicked the "Startup" option under Existing Folders. By default, "Dentrix" will be typed into the box at the top. If you simply clicked Next, it would have gone
to the correct location. The screen is a little confusing, because something in the list will be highlighted by default, but what is typed into the box at the top will actually be used.

Can one build a XP mode on Windows 8.1 ? (Software that will provide the same experiance?)

I Know XP mode is not supported under Windows 8. I was wondering if there was a way to manually build a XP mode install.
I want the same experiance as XP mode due to having hardware that only has 32bit support(driver) on Windows 8.1 x64.
I would like the shortcuts to the apps on the desktop and to be able to run them from the VM.
I have PLENTY of Windows XP pro licences that are not in use any more and I have the media. I would prefer not to install a whole VM package and have to run it in a VM as I want to use it on a 8.1 tablet I have.
With all the VM software packages out there for free, is there one that will provide what I am looking for ?
Me

Me,
The answer to your question is no, a Windows XP mode cannot be manually built for Windows 8.1.
Your options include Hyper-V as well as VirtualBox and VMWare player, which was already mentioned.
Even if there were a way to build a Windows XP mode within Windows 8.1, it wouldn’t be supported past April 8th, which is the end of support date for Windows XP.
This includes Windows XP mode in Windows 7.
The
Windows XP End of Support page also lists other issues that you would be facing, such as:
Security:
Without critical Windows XP security updates, your PC may become vulnerable to harmful viruses, spyware, and other malicious software which can steal or damage your business
data and information. Anti-virus software will also not be able to fully protect you once Windows XP itself is unsupported.
Compliance:
Businesses that are governed by regulatory obligations such as HIPAA may find that they are no longer able to satisfy compliance requirements. More information on HHS’s
view on the security requirements for information systems that contain electronic protected health information (e-PHI) can be found here (HHS HIPAA FAQ - Security
Rule).
Lack of Independent Software Vendor (ISV) Support:
Many software vendors will no longer support their products running on Windows XP as they are unable to receive Windows XP updates. For example, the new Office takes advantage
of the modern Windows and will not run on Windows XP.
Hardware Manufacturer support:
Most PC hardware manufacturers will stop supporting Windows XP on existing and new hardware. This will also mean that drivers required to run Windows XP on new hardware
may not be available.
Mike
Windows Outreach Team – IT Pro

"cannot complete windows setup" Windows xp mode on Windows 7 professional

I am currently having a problem loading windows xp mode on windows 7 professional on my new laptop
Laptop specs
LENOVO
Processor: AMD A6-5350M APU with Radeon(tm) HD Grapihcs 2.90 GHz
Installed memory (RAM): 4.00 GB (3.15 GB usable)
System type: 64-bit Operating System

experiencing the same issues you are describing on what appears to be the same model of computer. Can anyone provide additional information on applying the suggested hotfix?
@Rick Dee - After installing both XP mode and Virtual PC service pack on the computer XP mode appears in the list of Virtual Machines. After running through the initial set up of the VM (Windows XP Mode) listed in ~/<user>/virtual machines, the
setup of the VM fails with the error, "cannot complete windows setup".
I use a vhd that I deploy to all my client computers to run XP mode. I have deployed this vhd on at least 5 other laptops with the same specs from the same manufacturer. On this particular machine though, when I tried to deploy this vhd, the
vm just hangs. So I have been trying to install the distributed copy of Windows XP mode from Microsoft. When I do this, I get the error.

Will Let's Edit run on Windows XP mode in Windows 7?

I just purchsed an iMac and I want to load Windows 7 Professional onto it as well. We own the full version of Edius 5 but have not tried learning that program yet. I don't know if Edius 5 will run on Windows 7 but if I can still use Let's Edit I'll be in business for now. I read some information on running Windows XP mode on Windows 7 and I see that a special processer is needed in order to run this. Do you have any idea if my new iMac will support the Windows XP mode? Any help you can provide me will be extremely benefecial to me.
Also, where and how can i acquire the legacy OCHI firewire driver for my video card? As i mentioned, this will be on a new model iMac so will I still need this driver to be installed seperately? Why is it that the default driver installed by Windows 7 will not allow me to capture or output video?
What I am trying to ultimately avoid at this point is having to load an outdated Windows XP OS onto my brand new iMac that utilizes 64 bit hardware and software. I will greatly appreciate any further help you can provide me.
Thanks,
Nick

Some basics.
VMs are virtual machines. They run inside or under or side by side (same thing, just what people call it) and your Mac will run Windows and this application just peachy - perfect for anything except games.
Running Windows as Windows is also called running Windows natively (directly on the hardware, versus running in one of those VMs), is also called a dual boot: boot Mac OS -- or you boot Windows.
VMware Fusion: Install Windows via Boot CAmp (native, on its own hardware), but / and, you can also then use Fusion (which is a VM) inside Mac OS when you want; or, you can boot and run Windows natively.
XP Mode requires hardware virtualization to be enabled in the system board bios (that is EFI or actually UEFI, that Macs use). On a PC you have to enable it in BIOS as it is off by default usually.
It 'should' be enabled. Separate from 64-bit hardware. And separate from your UEFI firmware which is also 64-bit. But the Mac Pro found itself with VT-d off after an Apple Security Update. Go figure.
XP Mode is really just hardware VM. And using Sun (now Oracle) VirtualBox VM (free) is easy.
A VM just does not benefit from 64-bit, unless you need to allocate say 4-6GB RAM in your VM, and your app definitely does not.
Pro version is what MS sells or offers to education institutions.
Is needed for more backup options, XP Mode, dual processor (Mac Pro).
Download and play with VirtualBox and Windows 7 Pro 32-bit.
I have Pro and Ultimate on two systems.

Why does Digital Edition not work in desktop mode for WIndows 8?

I have installed the most recent version of JAVA and then downloaded and installed Digital Editions. I can open Digital Editions in desktop mode but when I select a book I cannot turn the page or move to a new page by any means. The only thing that seems to work is to select a new page and then toggle between full screen and partial.

I don't think ADE uses Java at all.
I run it in desktop mode in WIndows 8 and it reads books and turns pages fine: either using the left-right arrow keys,
or clicking on the forward/back buttons each side of the scrollbar at the bottom of the page.
There are lots of bugs in ADE2.0, and even though that isn't a bug for me it may be for you.
Try replacing ADE2.0 with the older but more reliable v1.7.2.
(You can have them both installed at once if you like.)
Version 1.7.2, it is a little difficult to find, available on Adobe site for Windows and for Mac.
http://helpx.adobe.com/digital-editions/kb/cant-install-digital-editions.html
The forum software is sometimes corrupting the link above. There shouldn't be a blank in 'editio ns.html'. The following redirects to the same page: http://tinyurl.com/diged172

ASDM demo mode in Windows 7?

Similar Messages

Maybe you are looking for