ASDM error - you do not have sufficient privileges to execute commands required to load asdm

I am getting below error to log in via ASDM for ASA firewall.
Please help.

Hello Gurujaj,
You are running AAA on your network and you are running authorization,
The user you are using does not have the command authorization set to load the ASDM,
The ones need it are:
Commands required to log ASDM
privilege show level 3 mode exec command logging
privilege show level 3 mode exec command blocks
Regards,
Julio Carvajal

Similar Messages

On windows 7 I receive this error while installing error: "You do not have sufficient privileges to

error: "You do not have sufficient privileges to perform the requested action."
The resolution on the other thread did not work for me. What could be wrong? I have installed Adobe Flash Media Live before without an issue but after I reformatted my PC I keep receiving this. Thanks in advance.

I've solved it,
Change the permissions on the file (sudo chmod 755 httpd.conf)
then
sudo nano httpd.conf
and it works fine
thanks alot for your help

ERROR: You do not have sufficient privileges to complete this installation

When attempting to install iTunes 9.0.1, I receive this message just after the installation begins: You do not have sufficient privileges to complete this installation for all users on this machine. Log on as an administrator and then retry this installation."
I am the administrator of this machine. I have tried installing in a different directory of the all users folder, however that failed with the same reason. This PC has had some anomalies of late so this may not be iTunes, but I'm without clues as to where to go to fix this.
Thanks for any clever ideas you may have. I miss the music.
Gina

Hi,
You could use Software Restriction Policies (SRP’s) or Applocker(supported on Windows server 2008 R2/Windows 7 only) to restrict the running
of the application for specific user.
Description of the Software Restriction Policies
http://support.microsoft.com/kb/310791
HOW TO: Restrict Users from Running Specific Windows Programs
http://support.microsoft.com/kb/323525
How to Implement Group Policy Security Filtering
http://www.windowsnetworking.com/articles_tutorials/Group-Policy-Security-Filtering.htmlPlease remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Error: You do not have sufficient privileges to perform this operation.

I dun know is it appropraite to bounce this question in this forum or
not,nevertheless i am asking cuz i dun know where to ask dis silly question.
I wana view this link it asks me OTN member user and password ,after
putting the username and password the aforesaid error is displaying ,from where
can i get such privileges for this link.
http://www.oracle.com/gateways/gateway_bundles/faq.htmlKhurram

This is certainly not the appropriate foruma as it is not monitored by Oracle staff
Try the Feedback forum
Community Feedback (No Product Questions)

You do not have sufficient privileges to complete this installation for all users of the machine. Log on as administrator and then retry this installation

Hi all
Have seen a couple threads regarding this but unfortunately nothing that solves my problem thus far!
Right now, our developers are using the Domain Admin account to promote their website code using MSI files. I'd like to change this as I feel the Domain Admin account should be on lock down and only used when absolutely necessary, pretty common. The
same goes for my account too, I would like to absolve as much use of the Domain Admin as I can.
Problem is, when they run installers from their own accounts, they receive this error: You do not have sufficient privileges
to complete this installation for all users of the machine. Log on as administrator and then retry this installation
The accounts they are using are part of the Built In Administrators group and the Domain Admins group... I'm not sure what other permission you'd need in a domain? We've gone as far as explicitly giving them local admin access on this server and still
nothing changes.
Is there a Group Policy or something that I can change to provide install rights and possibly remove these accounts as Domain Admin and more along the line of Power User?
Thanks much for your help!
Ryan

Hi,
You could use Software Restriction Policies (SRP’s) or Applocker(supported on Windows server 2008 R2/Windows 7 only) to restrict the running
of the application for specific user.
Description of the Software Restriction Policies
http://support.microsoft.com/kb/310791
HOW TO: Restrict Users from Running Specific Windows Programs
http://support.microsoft.com/kb/323525
How to Implement Group Policy Security Filtering
http://www.windowsnetworking.com/articles_tutorials/Group-Policy-Security-Filtering.htmlPlease remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

I have and Access is denied. You do not have sufficient privileges in CS4 error message when trying to change a directory name in CS4

Hi I keep getting this message in CS4 (access is denied. You do not have sufficient privileges)
Can anyone help to gain privileges?
Daryl

Same problem here...nothing in my settings have changed since the upgrade and I've checked my cookie settings and they allow 3rd party cookies. What's up Mozilla? I've been faithful to you for years and you let me down now?

Windows Vista Bonjour error "You do not have sufficient access..."

My Windows Vista laptop recognizes my HP PSC 1310 printer connected as a USB printer with Airport Extreme. It even has the correct driver. When i go to finish set up i get an error "You do not have sufficient access to your computer to connect to the selected printer". I am doing this as an admin on my PC. The printer works correctly on my Macbook. The guidance given by apple is no help at all. Any ideas?

I experienced the same general problem and did find a manual workaround in my particular instance. Hopefully this is helpful to anyone who's facing the same situation.
MY SETUP: installing a hp LaserJet 1012 that's tethered to a wireless Time Capsule (home network) on a virtual VISTA platform running within Parallels 4.0.3810 on an iMac OS 10.5.6.
THE PROBLEM: WinXP (also virtual) connected to the printer through BONJOUR FOR WINDOWS without any problems. However, doing the same in Vista resulted in a last step termination of installation with the following message from Vista: "You do not have sufficient access to your computer to connect to the selected printer." Lovely.
Turns out, according to Microsoft (link: support.microsoft.com/kb/946394/en-us Help and Support Article ID: 946394 - Last Review: January 24, 2008), the problems is due to "the Hewlett-Packard (HP) print driver uses an HPBmini.dll file ("HP Mini Installer") whose version is earlier than 1.0.0.13."
My workaround was to simply install the network printer manually via ~ (the following are the choices that I clicked on in VISTA)
Vista Control Panel > Hardware and Sound > Printers > Add a printer >
Add a network, wireless or Bluetooth printer >
The printer that I want isn't listed >
Add a printer using a TCP/IP address or hostname >
CHOOSE - Device type: Autodetect
INPUT - Hostname or IP address: "Time-Capsule"
(which is the specific hostname in my case, the hostname can be found by going to OS X System Preference > Print & Fax > click & highlight the printer installed on the local network in OS X and look for the hostname after "Location:". Remember, Windows do not do spaces, so if there are any spaces in your hostname be sure to substitute a dash "-".
SELECT - "Query the printer and automatically select the driver to use" >
Device Type > Standard | Generic Network Card > Install the printer driver* >
(*Here's the tricky step, since you don't want to use an old driver which would bring up that old insufficient access message, but you do have some options:
a) you have a known VISTA COMPATIBLE driver from the manufacturer (net downld);
b) the "Add Printer Wizard" window may contain a driver for your specific printer or a similar printer. Also, try the "Windows Update" button to refresh the choices if you can't find it the first time; and finally,
c)"Generic" is a legitimate choice in the Manufacturer window if you can't find any better options.)
From there, it's just Next > Next > and choose to share printer, etc. to finish up.
Luckily, I got through to "Print a test page" and it all works without the annoying "insufficient access" message.
Best of luck to you.

Essbase add-in error:You do not have sufficient access to perform a lock

Hi,
I have a user who is doing a retrieve in Excel and is getting this error on v.9.3.1:
Essbase Error: "You do not have sufficient access to perform a lock and send on this database".
The user is just doing a retrieve, no lock and send.
I asked him to disable 'update mode' in add-in options (Mode tab) on each of his sheets.
But when he open a new sheet/document Excel 2007, the 'update mode' is enabled by default.
Where can we change that ? Is there a command to put in a .ini file?
I check all the threads but there no answer on how to change this default setting.
Thanks for your help,
Marie.

Hi Raja,
Check this out../
Weird problem regarding Essbase Excel plug in
It might help
Regards
Amarnath

Essbase error:You do not have sufficient access to perform a lock on this..

Hi all,
I tried to retrieve the members in the spreadsheet addin client and I am getting the error as follows:
Essbase error: You do not have sufficient access to perform a lock on this database.
But Iam trying to do only a retrieve operation. Essbase version is 9.3.0.1.02 and OS is windows XP.
Also under Essbase->options->Mode tab, the check box update mode was unchecked.
I was able to do the operation before without any error and suddenly Iam facing this issue.
Can anyone help me on the above
Thanks in advance,
Raja

Hi Raja,
Check this out../
Weird problem regarding Essbase Excel plug in
It might help
Regards
Amarnath

Error: You do not have sufficient access to perform a lock on this database

Hi,
Can anyone help on this.
When user try to load data through Excel it throws the following error "You do not have sufficient access to perform a lock on this database"
We are using Essbase 6.5.
We have tried following options
FIX1:
In Microsoft Excel, under ESSBASE -> OPTIONS, under the MODE tab, the check box UPDATE MODE is checked.
When the UPDATE MODE check box is selected retrievals will automatically lock the corresponding database area with each retrieval. Disable Update Mode to stop locking blocks automatically. In update mode, the Send command (which updates the server with data values from the spreadsheet) does not automatically unlock data after the send.
1. Launch Microsoft Excel
2. Select ESSBASE -> OPTIONS
3. Select the MODE tab
4. Uncheck "Update Mode" to return to normal mode
This error is seen when trying to lock and send data via the Hyperion Essbase Spreadsheet Add-in into that fall within a replicated target partition definition
1. Go to HYPERION APPLICATION MANAGER -> DATABASE -> PARTITIONMANAGER
2. Select the relevant partition
3. Select EDIT
4. On the CONNECT TAB, select SETTINGS and tick the option THETARGET PARTITION CAN BE UPDATED
Also gave write access to that user.
Can anyone give another possible solutions.
With thanks,
babu

Hi Raja,
Check this out../
Weird problem regarding Essbase Excel plug in
It might help
Regards
Amarnath

Bonjour for windows gives this error - You do not have sufficient access...

I installed Bonjour for windows on a PC running XP. When I run the Bonjour app from windows I can see the printer I wish to connect to. It is shared off of my G3 server. When I try to connect I get the following error,
"You do not have sufficient access to your computer to connect to the selected printer"
I have done some research through Apple's info database and found,
http://docs.info.apple.com/article.html?artnum=302408
I followed the instructions and still I get the same error. I have rebooted the PC deleted all the printers under the printer window. But no luck. I found a similar request by another apple forum user. His issue was the same but he was using 'Parallels' emulator. But no solution was provided.
Any suggestions?

Well this is what I've done to date to try to resolve this issue.
I uninstalled Bonjour for Windows from my PC. I checked Apples support pages dealing with Bonjour for Windows (BfW). As suggested I deleted all printers in my printer window, (to delete all possible print Queues). I updated my Windows to the latest patch for XP. I reinstalled BfW, with the XP Firewall turned on. It is suggested that BfW will make the necessary changes to the XP firewall to allow traffic going through port 5353. I have tried more than one printer off of my G3 and I double checked my external router port restrictions, and I turned off the firewall on my G3, shared mt printers in OS X, and even turned on windows file sharing. I even updated my G3 to 10.4.8
I pinged my G3 from my XP machine it's there. Also I can see the G3 with it's printers when I browse the network from the XP box. Also I'm on the same local subnet 192.168.2.x
The only thing I have not done yet is see if it is possible to ping a bonjour host (my G3) from a bonjour client (XP box). That would at least verifiy the 5353ports.
Anyone have a bonjour utility to do that? Probably have to run in a Windows enviroment. Or can a ping packet be directed to use a particular port?

Dashboard Designer Error - You do not have sufficient permissions to complete the request.

Hi all
I have created a PerformancePoint Data Source library and a PerformancePoint Reports list on a SharePoint site. The PerformancePoint site collection and site features are also both activated. The data source library is in
the 'trusted data soruces' list in administration. Existing reports I have created show OK on the site.
When user, who has full control of the entire site, clicks "add a new item" in the BI Reports list, SharePoint launches Dashboard Designer OK.
The problem is when Dashboard Designer loads, it does not load the existing data sources & reports. Clicking on the refresh icon results in the error:
You do not have sufficient permissions to complete the request.
If I add this user to the Site Collection Administrators list, the user can refresh and view the data sources & reports OK. Is this a requirement to create reports in Dashboard Designer? It is not acceptable to set all
our report designer users as the site collection administrator.
Cheers
Tyson

Hi,
Have you also tried to assign rights using the technique mentioned in the above given document (i.e. using Dashboard Designer):
Important To assign or change user permissions for dashboard items, you must have
Full Control permissions. Although you can create and publish dashboard items with
Design permissions, you cannot assign or change permissions for dashboard items unless you also have
Full Control (Site) or Site Collection Administrator permissions.
Use the SharePoint Permissions dialog box to assign or change user permissions for a dashboard item. You can open the
SharePoint Permissions dialog box from Dashboard Designer or from the SharePoint list or document library that contains the dashboard item. The following sections describe both methods.
Edit user permissions in Dashboard Designer
In the Workspace Browser, click PerformancePoint Content or
Data Connections, depending on the item that you want to modify. Then, in the center pane, double-click the dashboard item to open it for editing.
In the ribbon, click the Home tab, locate the Item group, and then click
Permissions. A browser window opens, which enables you to view or change the SharePoint permissions for the dashboard item that you opened.
Use the SharePoint permissions dialog box to modify the user permissions for your dashboard item, and then save your changes.
Edit user permissions in a SharePoint list or document library
Locate the dashboard item that you want to modify in its SharePoint list or document library.
Select the check box that is next to the name of the dashboard item. At first glance, you might not see a check box next to your dashboard item. The check box is visible when you put your cursor next to the
Title column, which is located next to the name of the dashboard item. The ribbon appears in the SharePoint site.
In the SharePoint ribbon, click List Tools, and then click
Items. Locate the Manage section, and then click
Document Permissions. A SharePoint Permissions dialog box opens. This enables you to view and change the user permissions for the item that you selected.
Use the SharePoint Permissions dialog box to modify user permissions for your dashboard item, and then save your changes.
Please tell us if this approach shows different permissions assigned and solves your problem.
Thanks and best regards,
Martin
Martin W. Angler, MCTS
Blog angler.wordpress.com
Twitter: Follow me on twitter

In trying to update to Firefox 3.6.11 on an intel mac g5, I get this message: the operation cannot be completed because you do not have sufficient privileges for some of the items -- any suggestions? thanks!

In trying to update to Firefox 3.6.11 on an intel mac g5, I get this message: the operation cannot be completed because you do not have sufficient privileges for some of the items -- any suggestions? thanks!

You can try to repair the permissions for the Firefox application files and folders.
You can also do this:
* Download a new copy of the Firefox program: http://www.mozilla.com/firefox/all.html
* Trash the current Firefox application to do a clean (re)install.
* Install the new version that you have downloaded.
Your profile data is stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder], so you won't lose your bookmarks and other personal data.

When I try to upgrade to the newer version of Firefox, this is the message I get (I am using OS 10.4.11): The operation cannot be completed because you do not have sufficient privileges for some of the items.

I have recently dropped Earthink as me dial-up provider. I now am using Virgin Mobile Broadband2GO. I was using Safari. I am now using Yahoo! Mail Plus. It suggested I switch to Firefox. I had an older version of Firefox (2.0.0.6) and started using it. It suggested I needed to upgrade because many of the newer web sites wouldn't work well on this older version. I downloaded the newer version and proceeded with the installation and it would tell me this: '''The operation cannot be completed because you do not have sufficient privileges for some of the items.''' I have re-downloaded and tried it again two more times. I haven't a clue what that means or what to do about it.

If there are problems with updating or with the permissions then easiest is to download the full version and trash the currently installed version to do a clean install of the new version.
Download a new copy of the Firefox program and save the DMG file to the desktop
* Firefox 6.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Trash the current Firefox application to do a clean (re-)install
* Install the new version that you have downloaded
Your profile data is stored elsewhere in the Firefox Profile Folder, so you won't lose your bookmarks and other personal data.
* http://kb.mozillazine.org/Profile_folder_-_Firefox

Networked hard drive and "you do not have sufficient privileges..."...??

Hi. Our set-up is as follows:
iMac 17" 'Igloo' ethernet to Belkin wifi router>ADSL
External Prolific 120gb HD (2 partitions, one is clone of iBook, the other is miscellaneous 'Saves'.) - firewire to iMac.
iBook wifi to Belkin.
iUse iBook, 'erUse 'erMac. (Don't ask, 'er doesn't like 'notebooks'. Suits me I prefer the iBook. The lack of 'real estate' bugs me sometimes, but you can't have everything...)
No problems networking to iMac or External HD, either or both partitions, from iBook via wifi.
Here's the rub...
If, from the iBook, I try to 'tidy up' files on the miscellaneous 'Saves' partition of the external (which is connected to the iMac, remember...?) by moving them from one folder to another, I get an authentication box. I enter PW, hit 'Enter' and get another box saying:
"The operation could not be completed because you do not have sufficient privileges for some of the items."
So I dash over to the iMac, push 'er out of the way, change Ownership & Permissions to 'Ade' as opposed to 'Jenny', click 'Apply to enclosed items', OK the warning, dash back over to the iBook, (12 ft or so) and still only get 'Read only' access to enclosed items. If I tediously go through every subfolder & file using the iMac I can get control from the iBook, but surely it doesn't have to be like this?
Please, can someone point me in the right direction here?
If I connect the X HD directly to the iBook, none of the above problems occur. Because of our domestic setup, however, it is 'neater' to have the X HD stashed under the iMac's (or 'er) desk.
Thanks in advance.
Adrian
ibook G4 1GHz, 768mb; iMac 17" G4:768mb (10.3.9) Mac OS X (10.4.5) Belkin Wireless F5D7632

In order to setup sharepoints with better permissions you should try out sharepoints.
You can then setup your shared folder to inherit permission from parent. Then anyone associated to the group that folder belongs to should have no problem moving and deleting files.

ASDM error - you do not have sufficient privileges to execute commands required to load asdm

Similar Messages

Maybe you are looking for