ASDM is temprarily unable to contact the firewall

For the past few days, every time I connect to the ASDM, I get a pop up window saying that the ASDM is not able to connect to the firewall. This happens about 5 minutes after I start the ASDM session.
Does anyone else have this?

Issue the management-access inside command In the ASA configuration. This can also happen sometimes if the Actual ASDM flename and the configured filename doesnt match. Check the line asdm image disk0:/asdm-502.bin.

Similar Messages

LabVIEW FPGA was unable to contact the Compile Server at "localhost" on port 96.

Hi,
The following error occured when i am trying to compile my design on labview fpga 8.6, and the error reads as follows.
"LabVIEW FPGA was unable to contact the Compile Server at "localhost" on port 96. The server name or port may be incorrect, a firewall may be blocking communications with the server, or the configured timeout may be too low. You may reconfigure Compile Settings by clicking the Configure button or try contacting the Compile Server again by clicking the Retry button. Click the Cancel button to abort."
Can ane one help me in sorting out this error.,
Regards
KalyanSuman KV

This should solve it

I can't activate iMessage on my iPad3. Why do I get a message saying: Unable to contact the iMessage server. Try again."

I can't activate iMessage on my iPad3; message says: Unable to contact the iMessage server. Try again."
Settings > iMessage > Enter Apple ID
I enter the info
Click "Sign In"
Prompted for my Apple ID Password again (in a pop up)
Message appears "iMessage Activation" + "Could not sign in. Please check your network connection and try again."
OK the message
I verify Safari can get toethe web & load pages OK
Back to iMessage in Settings
Repeat steps 1-4
Now at iMessage screen where I set how people will message me. I have my iPhone's number, my email address I use for Apple ID, and my @me email address
I leave them all checked and I hit "Next"
"Verifying" with the spinning wheel at the top of the screen...
Pop up message says: "iMessage Activation" + "Unable to contect the iMessage server. Try again." (this is about the 6th time I've tried this)
What have I done to try to make it work?:
Retied as directed by iPad
Powered iPad off & tried again
Turned airplane mode on, off, and tried again
Verified that the iPad DOES have network access by browsing the web with Safari (not using 3G/4G, wifi only)
Please suggest something...someone.... anyone?

I can't activate iMessage on my iPad3; message says: Unable to contact the iMessage server. Try again."
Settings > iMessage > Enter Apple ID
I enter the info
Click "Sign In"
Prompted for my Apple ID Password again (in a pop up)
Message appears "iMessage Activation" + "Could not sign in. Please check your network connection and try again."
OK the message
I verify Safari can get toethe web & load pages OK
Back to iMessage in Settings
Repeat steps 1-4
Now at iMessage screen where I set how people will message me. I have my iPhone's number, my email address I use for Apple ID, and my @me email address
I leave them all checked and I hit "Next"
"Verifying" with the spinning wheel at the top of the screen...
Pop up message says: "iMessage Activation" + "Unable to contect the iMessage server. Try again." (this is about the 6th time I've tried this)
What have I done to try to make it work?:
Retied as directed by iPad
Powered iPad off & tried again
Turned airplane mode on, off, and tried again
Verified that the iPad DOES have network access by browsing the web with Safari (not using 3G/4G, wifi only)
Please suggest something...someone.... anyone?

Windows 8 Pro 64bit, Aladdin eToken Pro, CISCO VPN-Client 5.0.07.0440 - Responding : Reason 403: Unable to contact the security gateway...

Windows 8 Pro 64bit, eToken (Aladdin with newest Safenet etoken-Client V 8.2.85.0) Pro (V.with Cisco Systems VPN Client Version 5.0.07.0440 -> VPN Error-Log :
VPN-Client Responding : Reason 403: Unable to contact the security gateway...
(Detailled VPN-Error-Log see attached)
Thanks in advance for any ideas or solution, its getting urgent !!

First, try TheGreenBow's online troubleshooter. If that doesn't work, you can try their general support or simply contact them directly.

Error message? Unable to contact the FaceTime server.

Have new imac and I get this error message: Unable to contact the FaceTime server. All mty other apple devices can connect but not my iMac.

Doesn't make a difference. Any other suggestions?
This message persists:
"Unable to contact the FaceTime server. Try again."

How can I stop the yellow browser bar from appearing? the one which says "unable to contact the login server"???

this yellow bar appears constantly while I am using the internet. It says" LastPass was unable to contact the login server, etc., etc."
It is very annoying, and causes my screen to jump about when it is being active.
I am using windows 7 on a HP desktop.

hello Larryrush, please contact lastpass's support about this issue - they can likely give you better advice and are the only people who can resolve server errors in their network.

I phone purchased online did not boot and it is said to have been locked through i cloud and i an unable to contact the seller how can i activate the phone

I phone purchased online did not boot and it is said to have been locked through i cloud and i an unable to contact the seller how can i activate the phone

Unfortunately, your best bet is to obtain original proof of purchase and escalate your issue for assistance in detaching the Apple ID from that device. If your unable to get the proof of purchase, expensive paperweight . Did you get it through amazon?? Because I just got one through amazon....
<Edited by Host>

Hi, i bought an iphone 5 through ebay, when i am trying to activate, its asking for a icloud user name and password, but i am unable to contact the owner, but its not black listed. is there any solution? please help me.

hi, i bought an iphone 5 through ebay, when i am trying to activate, its asking for a icloud user name and password, but i am unable to contact the owner, but its not black listed. is there any solution? please help me.

Hello there, Ark.
It sounds like the iPhone has Activation Lock still activated. The following Knowledge Base article provides the methods available for removing the previous owner's account:
Find My iPhone Activation Lock: Removing a device from a previous owner’s account
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

HT204380 It seems that my iPhone4S is unable to contact the FaceTime server. I am using a WI-FI connection. What is wrong?

It seems that my iPhone 4S is unable to contact the FaceTime server. I am using a WIFI connection. I cannot connect to others using FaceTime. What do I have to do?

Hello carrwf,
It sounds like you unable to connect your Apple TV to the iTunes Store. I would use this troubleshooting from the following article to help you resolve the issue named:
Apple TV (2nd and 3rd generation): Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/TS4546
If you discover that you aren't connected to a network, the signal strength is low, or some of these settings are incorrect or blank, try the following steps:
Ensure that Apple TV is within range of your Wi-Fi router or base station.
Confirm that your Wi-Fi router and cable/DSL modem are connected to power and turned on.
Make sure other devices (computers, iPhone, iPad, for example) are able to connect to the Wi-Fi network and access the Internet.
Check your Wi-Fi network settings on Apple TV:
Choose Settings > General > Network > Wi-Fi and press the center button on the remote to display nearby networks.
Choose your Wi-Fi network from the list.
If your Wi-Fi network uses a password, make sure you are entering it correctly.
Restart your Apple TV by choosing Settings > General > Restart.
Try restarting your Wi-Fi router or modem by turning it off and then on again.
If possible, connect an Ethernet cable and verify your Internet connection. If you can connect to the Internet using an Ethernet connection, verify that your Apple TV is using the latest software by choosing Settings > General > Software Update. If your Apple TV can be updated, install the update and then try the steps again.
Disconnect and rejoin your Wi-Fi network by selecting your network on the Apple TV and then choosing Forget Network. Rejoin your Wi-Fi network after it disconnects.
Thank you for using Apple Support Communities.
Regards,
Sterling

FaceTime error unable to contact the FaceTime server

I keep getting error on FaceTime. Unable to contact the FaceTime server?.

Hi,
I can confirm that yesterday I could not send pic in iMessages with Message beta or from my iPhone.
Today I can.
As Message beta (and in fact iChat 6) and FaceTime both use an App called IMAgent on the Mac to help with logins it is likely that the same servers are involved at the Apple end.
IMAgent also "Listens" when the computer is On but the apps are not launched for Off Line Calls.
(iChat and iChatAgent has always done this for Off Line IMs from AIM Buddies and now IMAgent does it for Jabber and AIM in iChat or Messages and FaceTime)
It seems the servers are back on line.
7:50 PM Monday; July 23, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Unable to contact the RMI registry

Can anyone please help with this error?
exception: flex.messaging.MessageException: Unable to contact
the RMI registry on 'localhost' to look for the oldFusion Data
Management Service: java.rmi.onnectionIOException: error during
JRMP connection establishment; nested exception is:
java.net.SocketTimeoutException: Read time out.
This is a previously working flex app, but a fresh install of
ColdFusion 7 and I've enabled FDS in CF Admin.

Can anyone please help with this error?
exception: flex.messaging.MessageException: Unable to contact
the RMI registry on 'localhost' to look for the oldFusion Data
Management Service: java.rmi.onnectionIOException: error during
JRMP connection establishment; nested exception is:
java.net.SocketTimeoutException: Read time out.
This is a previously working flex app, but a fresh install of
ColdFusion 7 and I've enabled FDS in CF Admin.

McAfee Family Protection unable to contact the fil...

On my son's computer, whenever i try to access any website (including McAfee's own one!) apart from Google I get the message "Family Protection was unable to contact the filtering server." I think McAfee had an update yesterday.
Solved!
Go to Solution.

Try uninstalling it, check if you access internet then if you want it back reinstall.
See link for BT Netprotect
http://bt.custhelp.com/app/answers/detail/a_id/13223/~/how-do-i-uninstall-bt-family-protection%3F
See link for McAfee Family Protection
http://service.mcafee.com/FAQDocument.aspx?lc=1033&id=TS100686

Unable to access the Firewall through ASDM

                   Hi All,
Thanks in advance ,
in my organisatin we are facing one issue with launching of ASDM in ASA 5520 , when wer are trying to access the Firewall through ASDM we are unable to access that , see the java error loggs below , yes i know if we reload the firewall then this problem will solve , but my organisation management donsent want to reload the firewall , other procedure is to upgrage the ASDM version , just let me know the procedure for this
Using JRE version 1.7.0_25 Java HotSpot(TM) Client VM
User home directory = C:\Users\shussain
c:   clear console window
f:   finalize objects on finalization queue
g:   garbage collect
h:   display this help message
m:   print memory usage
q:   hide console
s:   dump system properties
ASDM Application Logging Started at Tue Aug 20 11:04:48 AST 2013
Local Launcher Version = 1.5.30
Local Launcher Version Display = 1.5(30)
OK button clicked
Trying for ASDM Version file; url =
https://192.168.50.2/admin/
Server Version = 6.1(3)
Server Launcher Version = 1.5.30, size = 319488 bytes
invoking SGZ Loader..
Cache location = C:/Users/shussain/.asdm/cache
Exception in thread "SGZ Loader: launchSgzApplet" java.lang.NumberFormatException: For input string: "1 year 192"
at java.lang.NumberFormatException.forInputString(Unknown Source)
at java.lang.Integer.parseInt(Unknown Source)
at java.lang.Integer.parseInt(Unknown Source)
at com.cisco.pdm.Check.h(DashoA10*..:1358)
at com.cisco.pdm.Check.c(DashoA10*..:858)
at com.cisco.pdm.Check.a(DashoA10*..:438)
at com.cisco.pdm.PDMApplet.start(DashoA10*..:132)
at com.cisco.nm.dice.loader.r.run(DashoA19*..:410)

dear marvin,
find my firewall sh version output, and asdm version ,
ciscoasa# sh ver
Cisco Adaptive Security Appliance Software Version 8.0(4)
Device Manager Version 6.1(3)
Compiled on Thu 07-Aug-08 20:53 by builders
System image file is "disk0:/asa804-k8.bin"
Config file at boot was "startup-config"
ciscoasa up 1 year 193 days
Hardware:   ASA5520, 512 MB RAM, CPU Pentium 4 Celeron 2000 MHz
Internal ATA Compact Flash, 256MB
BIOS Flash M50FW080 @ 0xffe00000, 1024KB
Encryption hardware device : Cisco ASA-55x0 on-board accelerator (revision 0x0)
                             Boot microcode   : CN1000-MC-BOOT-2.00
                             SSL/IKE microcode: CNLite-MC-SSLm-PLUS-2.03
                             IPSec microcode : CNlite-MC-IPSECm-MAIN-2.05
0: Ext: GigabitEthernet0/0 : address is 0021.a09a.ba76, irq 9
1: Ext: GigabitEthernet0/1 : address is 0021.a09a.ba77, irq 9
2: Ext: GigabitEthernet0/2 : address is 0021.a09a.ba78, irq 9
3: Ext: GigabitEthernet0/3 : address is 0021.a09a.ba79, irq 9
4: Ext: Management0/0       : address is 0021.a09a.ba7a, irq 11
5: Int: Internal-Data0/0    : address is 0000.0001.0002, irq 11
6: Int: Internal-Control0/0 : address is 0000.0001.0001, irq 5
Licensed features for this platform:
Maximum Physical Interfaces : Unlimited
Maximum VLANs                : 150
Inside Hosts                 : Unlimited
Failover                     : Active/Active
VPN-DES                      : Enabled
VPN-3DES-AES                 : Disabled
Security Contexts            : 2
GTP/GPRS                     : Disabled
VPN Peers                    : 750
WebVPN Peers                 : 2
AnyConnect for Mobile        : Disabled
AnyConnect for Linksys phone : Disabled
Advanced Endpoint Assessment : Disabled
UC Proxy Sessions            : 2
This platform has an ASA 5520 VPN Plus license.
Serial Number: JMX1304L0HA
Running Activation Key: 0x0313c076 0x58bdf52e 0xa83245ac 0xb460b058 0x88201caa
Configuration register is 0x1
Configuration last modified by enable_15 at 10:18:47.850 AST Wed Aug 21 2013
ciscoasa#
ciscoasa# sh run asdm
asdm image disk0:/asdm-613.bin
asdm location internal-network1 255.255.0.0 internal

HT201210 when i plugged my 3gs in a message said there was an update and now it keeps failing and left my iphone with a picture saying plug into itunes which then says unable to contact the server try later ??? any clues ???

I conected my iphone 3gs to Itunes It says there was an update so i agreed it also recommended I do a back up so I agreed. then half way through the process it failed and a message popped up saying unable to contact server try again later. and alls I have on the phone now is a picture indicating to plug into itunes.
Any Clues ???? as when I plug in it says I need to restore the phone and it fails again. it was working fine before I did the update

Is this phone locked to a cell carrier?

Itunes error when restore unable to contact the apple server at this time try again later, how do i get around this??

restored through itunes as i bought it and coud not activate it. when restored searching....no sim... have rang up hpone if not blocked or anything and is on o2 can someone help me please?

If the phone was hacked to unlock it, it will not be able to activate until and unless the original carrier authorizes unlocking it. Since the UK carriers will not authorize an unlock for a phone that is not actively in use on their network, and you will not be able to activate it on any network until after it is unlocked, you will most likely not be able to activate and use it at all. It's a catch-22.
Return it to whereever you bought it and get a refund. Then buy a phone from a legitimate source.

ASDM is temprarily unable to contact the firewall

Similar Messages

Maybe you are looking for