ASDM not working on new ASA

Hi Everyone,
I am setting up new ASA for testing purposes.
So far it has single interface Active which is management.
I can ssh to ASA fine but ASDM is not working.
sh run http shows
sh run http
http server enable
http 172.31.20.0 255.255.255.0 management
sh run ssh
ssh 172.31.20.0 255.255.255.0 management.
Regards
MAhesh

Hi Julio,
sh run ssl foed not sjow any output
show flash | include asdm
111 16280544    Jun 29 2011 12:10:58 asdm-645.bin
sh run asdm
no asdm history enable
sh ver shows
up 2 days 2 hours
Hardware:   ASA5520, 2048 MB RAM, CPU Pentium 4 Celeron 2000 MHz
Internal ATA Compact Flash, 256MB
BIOS Flash M50FW016 @ 0xfff00000, 2048KB
Encryption hardware device : Cisco ASA-55x0 on-board accelerator (revision 0x0)
                             Boot microcode        : CN1000-MC-BOOT-2.00
                             SSL/IKE microcode     : CNLite-MC-SSLm-PLUS-2.03
                             IPSec microcode       : CNlite-MC-IPSECm-MAIN-2.06
                             Number of accelerators: 1
0: Ext: GigabitEthernet0/0 : address is e8b7.483d.0d68, irq 9
1: Ext: GigabitEthernet0/1 : address is e8b7.483d.0d69, irq 9
2: Ext: GigabitEthernet0/2 : address is e8b7.483d.0d6a, irq 9
3: Ext: GigabitEthernet0/3 : address is e8b7.483d.0d6b, irq 9
4: Ext: Management0/0       : address is e8b7.483d.0d6c, irq 11
5: Int: Not used            : irq 11
6: Int: Not used            : irq 5
Licensed features for this platform:
Maximum Physical Interfaces       : Unlimited      perpetual
Maximum VLANs                     : 150            perpetual
Inside Hosts                      : Unlimited      perpetual
Failover                          : Active/Active perpetual
VPN-DES                           : Enabled        perpetual
VPN-3DES-AES                      : Enabled        perpetual
Security Contexts                 : 2              perpetual
GTP/GPRS                          : Disabled       perpetual
AnyConnect Premium Peers          : 2              perpetual
AnyConnect Essentials             : Disabled       perpetual
Other VPN Peers                   : 750            perpetual
Total VPN Peers                   : 750            perpetual
Shared License                    : Disabled       perpetual
AnyConnect for Mobile             : Disabled       perpetual
AnyConnect for Cisco VPN Phone    : Disabled       perpetual
Advanced Endpoint Assessment      : Disabled       perpetual
UC Phone Proxy Sessions           : 2              perpetual
Total UC Proxy Sessions           : 2              perpetual
Botnet Traffic Filter             : Disabled       perpetual
Intercompany Media Engine         : Disabled       perpetual
This platform has an ASA 5520 VPN Plus license.
Regards
MAhesh

Similar Messages

Flash player does not work with new ICS Android 4.0.4 OS. Has this problem been addressed?

Flash player does not work with new ICS Android 4.0.4 OS. Has this problem been addressed? I am using Firefox Beta for android and I also tried just Firefox.

Please check the Play Store app for any Flash updates and install them if present.

Home sharing does not work with new mountain lion update.

home sharing does not work with new mountain lion update. Does anyone else have the same issue. Updated all computers in my home, deauthorized and reauthorized each computer. turn off home sharing and turned it back on. don't know what else to do..please help...

Our Apple TVs continue to lose connection ever since installing Mountain Lion on the host computer. The only thing that fixes them is to quit and relaunch iTunes, which only works unti the ATV goes to sleep. If a movie is paused for more than a few minutes and the ATV goes to sleep, pressing play again on the remote is greeted with "There are no movies on this computer" or "Turn on Home Sharing."
If we stop a video on one ATV and attempt to resume it in another room, the error begins again. The other ATV can't connect until iTunes is relaunched.
My guess is that it has something to do with the new [annoying] security settings. But I still haven't found a fix other than restarting iTunes everytime we want to watch something from our downloads. Fail.

HT3917 My apple wireless keyboard is not working after new batteries installed

My apple wireless keyboard is not working after new batteries installed.

Do you get a steady green light to say there is a connection. If not, are the batteries the right way round. Do you have a monitor to tell the batteries strength. Is there a reading. Are the batteries good quality ones, Duracell, Energiser or Apple rechargeables.

My new Dell PC running Windows 8 does not recognize my iPad or iPhone. Worked OK for iPhone for months but would not work for new iPad. I removed /relaoded iTunes and now it won't recognize either iPad or iPhone.

My new Dell PC running Windows 8 does not recognize my iPad or iPhone. Worked OK for iPhone for months but would not work for new iPad. I removed /relaoded iTunes and now it won't recognize either iPad or iPhone. Got any suggestions?

Hi there Lizabethfromaz,
You may find the troubleshooting steps in the article below helpful.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
-Griff W.

LR 5 not working on new Macbook Pro.

LR 5 not working on new Macbook Pro. Have tried 2 CC downloads, 5.6 licensed download and 5.5 licensed download, all result in the same thing. It comes up with basic screen but no panels and gives an error occurred when changing modules. Nothing I've tried seems to help. It also has says "get started with lightroom mobile at top left although it says it is Lr 5.6. Anybody else having problems? Calls to adobe result in no help and have to wait till Monday for some technical support. Surely this should run on a NEW laptop with no other software installed!!!

Install logs were fine. Application installed but wouldn't run properly. Finally got Adobe support and it turns out to be a file permissions error. Had to add both applications and myself as accessors of Lightroom folder under path ~/Library/Adobe/ and set permissions to read & write (was read only for everything but system) and apply to all enclosed folders. Runs fine now. Including this here in case anyone else runs across this issue.

YOUTUBE NOT WORKING ON NEW MACBOOK PRO

YOUTUBE NOT WORKING ON NEW MACBOOK PRO
Every time I want to see videos from youtube the video player just says "your browser does not currently recognize any of the video formats available".
Please help I have everything possible up to date.
Thanks!

It appears as if only some videos on YouTube will play using HTML5 and without Flash. For example, this video plays just fine for me and I do not have flash installed: http://www.youtube.com/watch?v=fxEWddT44BY
So, unfortunately, you will have to install flash or wait for YouTube to fix their website.
Also, one thing to try: When I had Flash installed and the "ClickToPlugin" Safari extension installed, YouTube would load all the movies in a simple HTML5 format. So no annotations or any other annoying stuff. Might be worth trying. You will have to install flash but, with the "ClickToPlugin" extension, you don't have to use Flash.

Free busy information not working in new exchange site.

HI,
We have central site Exchange 2010 setup and it working fine . For business requirement we Installed new Exchange server(Mail/CAS/HUB) in new site.
Post installed, Auto discover and mail flow are working fine but Free/busy information is not working for new site mailbox users(Not working in outlook and OWA also).
I am having a strange error coming from outlook. When I run "Test E-mail AutoConfiguration" in Outlook, it comes up with Protocol: Exchange Http "wrong server name"
Please share your suggestion to change/configure "correct server name" in "Protocol: Exchange HTTP"
Protocol: Exchange HTTP
Server: wrong server name
Login name: testuser
SSL: Yes
Mutual Authentication: Yes
Note : ( Protocol: Exchange RPC show correct server information and other Urls (OOF, OAB, OWA, Availability server).)

Hi will martin,
Thanks for your reply..
Yes , I already pointed internal web service virtual directory ( "https://casarrayname/EWS/Exchan...) to CAS server in new site. Other internal URLs (OWA,ECP,OOF,Availability service) also pointed to
new site CAS server.
But , when i check Auto discover internal URI and URL. below is the result.
Result 1
[PS] C:\Windows\system32>Get-AutodiscoverVirtualDirectory -Server Servername
Name
Server InternalUrl
Autodiscover (Default Web Site)
Servername
Result 2
[PS] C:\Windows\system32>Get-ClientAccessServer -Identity servername |fl *internaluri*
AutoDiscoverServiceInternalUri : https://casarrayname/Autodiscover/Autodiscover.xml
When i tried to set interurl using the below command and it completed with no error but still InterURL not reflect.
command : Set-AutodiscoverVirtualDirectory -InternalURL https://casarrayname/Autodiscover/Autodiscover.xml

Line-in not working with new driv

Has anyone else had issues with the line-in jack not working with new drivers? Is there a way to get it to work??Very frustrated. Is there a link to the beta drivers, they worked better for me then the new one.

The line input on the mini requires a 'line-level' signal, so the only microphones that work are ones that have an amplified output. Standard mics don't generate enough voltage to drive the mini's amplifiers.
That's the reason the mics work with the Griffin device (it has an amplifier) but not the mini directly.

Why my app not work in new version, Why my app not work in new version

I just update to new version software ios6.0 for my iPad, but I found that few of my apps downloaded before are not working now, how can I do now?

Lily yu wrote:
Why my app not work in new version
Ummm..I think that's obvious...the developer hasn't updated them to work with iOS 6

Facetime not working on new OS 10.8.5

facetime not working on new OS 10.8.5

Was the outside source the link at the bottom of this page? If so, that did not work for me.
http://https://helpx.adobe.com/flash-player/kb/installation-problems-flash-player-mac.html #

Zen Micro Photo not working with new XP SP2 install

Okay so my Zen Micro Photo stopped being recognised on my computer about ten months ago when I upgraded to WMP (for BBC iPlayer - it's compulsory to have it). Anyway I li'ved with this and have now got thoroughly sick of the same songs and nothing new so I have done a fresh install (on a brand new hard dri've) of Windows XP SP2 WMP9 with the sole intention of using this install/hard dri've?for the player. I used the original installation disk and it prompted me to upgrade to WMP0 as I installed everything. There were no errors during the install and I rebooted when prompted to.
When I attach the player it is recognised by the machine (task bar icon and correctly labelled in System > Hardware > Device Manager which reports it to be?working okay) but the Creative media software says "player not attached" when it is. It is not visible on My Computer as a dri've so I STILL have no access to the player. Player screen reports "docked" with a logo and is flashes a charging icon. Driver v5.2.0.0. The player plays fine but hasn't had new music on in almost a year
There is nothing else on the XP install (IE6 and everything - argh!) I did the registry permission tweak thing mentioned?here:?http://support.creative.com/kb/showa....aspx?sid=9287?but it didn't do anything.
Any help greatfully received!

Re: Zen Micro Photo not working with new XP SP2 install. Have you installed this plug-in?
Creative PlaysForSure Devices Plugin 5.00.36 for Creative MediaSource 5 Player/Organizer
Filesize : 27.9 MBDownload

Satellite A110 - WiFi switch is not working with new WiFi card

Hello Everyone
I have a problem with my Toshiba Notebook Satellite A110-178 (PSAB0E). I replaced the original WIFI card Intel 3945abg with Intel Link 5100 and on the new wifi card wifi hardware switch is not working.
New wifi card is discovered and drivers working correct but when I try to scan for wifi networks with IntelPro/Wireless software I have message to turn on hardware switch but it's turn on and not work. On old wifi card swich is working correct - orange light is on. On new card light is off and swich is not working.
Please help

Hi
Maybe you could enable the Wlan card using different way;
Go to device manager -> WLan card properties -> Advanced tab
There you could check if there is a option which would enables the WLan.
Its worth a try
Otherwise its a compatibility issue like suggested by PinkPanther
I read in different threads that this could happens if there is a different pin assignment on miniPCI WLan card and this could not match with the miniPCI slot on the mobo...

IMessage not working on new Macbook Pro.

iMessage not working on new Macbook Pro. Issue began after I downloaded latest version of Mountain Lion. After every message it says delivered then immediately a red circle with exclamation point says message not delivered. Any ideas?

I can also no longer text on my computer or iPad. Fine on iPhone. Same as you - I can see everything up until a specific day. But I didn't do any kind of update where it should have stopped. And it stopped working on my computer and iPad at the same time.

Texting is not working on new iphone 4s. Any suggestions?

Texting is not working on new iphone 4s. Any suggestions?

Att just told us to delete all txt conversations they are getting lots of complains about this.
it seems to work so far

ASDM not working on new ASA

Similar Messages

Maybe you are looking for