ASDM Privilege Level default 15 for Radius users

So this may be a bit of a dumb question...
I stumbled upon an ASA today that is configured to authenticate against a Radius server for SSH and HTTPS connections. If I log in via SSH, I can't gain a privilege level of more than 1 (tried login command, etc).
However, if I log in with ASDM, I always have privilege level 15.
Command authorization is not enabled.
Is this default behavior. If so, why? Do I need to enable command authorization to override this behavior?
FYI, the system in question is running ASA 8.3(1)
Thanks much

aaa-server RADGR protocol radius
aaa-server RADGR host 10.2.2.2
timeout 4
key cisco123
aaa authentication enable console RADGR LOCAL
After logging in, use the enable command with your user password.
http://www.cisco.com/en/US/partner/docs/security/asa/asa83/configuration/guide/access_management.html#wp1145571

Similar Messages

How to make custom append search help tab default for all users?

I've implemented my own search help append and I need to make the F4 search help to display my tab as default for all users. I know that search help stores the last tab used by the user in memory and when user uses the search help next time the last used tab is displayed but I have to make the system display the tab od my search help append always as default tab. Any idea how to do it?
Message was edited by:
        Marcin Milczynski

hi
<b>Enhancement using Append structures</b>
    Append structures allow you to attach fields to a table without actually having to modify the table itself. You can use the fields in append structures in ABAP programs just as you would any other field in the table.
Click on the append structure tab and opt to create new
structure.
Append structures allow you to enhance tables by adding fields to them that are not part of the standard. With append structures; customers can add their own fields to any table or structure they want.
Append structures are created for use with a specific table. However, a table can have multiple append structures assigned to it
    Customers can add their own fields to any table or structure they want.
The customer creates append structures in the customer namespace. The append structure is thus protected against overwriting during an upgrade. The fields in the append structure should also reside in the customer namespace, that is the field names should begin with ZZ or YY. This prevents name conflicts with fields inserted in the table by SAP

Enable save for all users in rich client document defaultly for all users

Hi,
Is there a option to enable save for all users in a rich client document defaultly for all users across the company. As the users who are creating reports are forgetting to check the box before sending the rich client document to others. Kindly let me know if you have any suggestions on this.
Thanks,
Karthik

I'd suggest that is is where your BO folder structure comes in. You can export from Rich Client to any folder that you have permissions to access - some sort of collaboration folder system would potentially be better and more secure than sending unsecured reports via email. If your IT security team found out that you were removing document security, I doubt they'd be impressed!
You can't do the default save for all users, simple as that (it's bad practice anyway, which is probably why you can't). While it's not the answer that you want to hear, it is the correct one.

Data Level security for specific Users

Hi,
Can you please suggest some ideas on by-passing the Data Level security for specific users or specific group?
Currently, we have data level security defined on a group permissions for one group and for people belonging to another group, the security should not apply and they should see entire data.
But, key thing here is that, the user belongs to both the groups.
Any ideas helps.
Thanks,
Chandu.

So you are saying you want a user to belong to a group with data-level security filters, but you don't want the filters to apply to that user?
Why are they in the group then?
Are the data filter defined with variables or are the hard-coded?
If variables, you may be able to put logic in initialization block to set the variable appropriately for specific users.
I'd rethink the security model - when I define data level security filters, I tend to force users to only belong to a single group/role.

Missing privilege:NO TRIGGERS FOR REPLICATION USER

Hello,
I'm configuring the Synchronization Manager following the steps on the SAP MaxDB Library 7.6. I've done every step until the activation of the Replication Units, where the Synchronization Manager GUI give me the following error:
+Create MaxDB Trigger
com.sap.dbtech.jdbc.exceptions.DatabaseException: [-5001]: Missing privilege:NO TRIGGERS FOR REPLICATION USER
     at com.sap.dbtech.jdbc.packet.ReplyPacket.createException(ReplyPacket.java:65)
     at com.sap.dbtech.jdbc.ConnectionSapDB.throwSQLError(ConnectionSapDB.java:1061)
     at com.sap.dbtech.jdbc.ConnectionSapDB.execute(ConnectionSapDB.java:689)
     at com.sap.dbtech.jdbc.ConnectionSapDB.execute(ConnectionSapDB.java:563)
     at com.sap.dbtech.jdbc.StatementSapDB.sendCommand(StatementSapDB.java:855)
     at com.sap.dbtech.jdbc.StatementSapDB.sendSQL(StatementSapDB.java:919)
     at com.sap.dbtech.jdbc.StatementSapDB.execute(StatementSapDB.java:266)
     at com.sap.dbtech.jdbc.StatementSapDB.execute(StatementSapDB.java:234)
     at com.sap.dbtech.jdbc.trace.Statement.execute(Statement.java:79)
     at com.sap.sdb.syncMan.util.SQLBuilder.markMaxDBTableForRep(SQLBuilder.java:301)
     at com.sap.sdb.syncMan.design.DesignSQLLayer.installTableOfParticipant(DesignSQLLayer.java:2427)
     at com.sap.sdb.syncMan.design.DesignSQLLayer.installReplicationUnit(DesignSQLLayer.java:1493)
     at com.sap.sdb.syncMan.gui.jface_controls.UnitControl.internalActivateParticipant(UnitControl.java:1165)
     at com.sap.sdb.syncMan.gui.jface_controls.UnitControl.internalActivateSelectedParticipant(UnitControl.java:1067)
     at com.sap.sdb.syncMan.gui.jface_controls.UnitControl.access$000(UnitControl.java:98)
     at com.sap.sdb.syncMan.gui.jface_controls.UnitControl$WorkerThread.run(UnitControl.java:125)+
Question:
1. What privilege should I give to the Synchronization User? It's already a DBA user.
2. Could it be a library problem?. According to the documentation installed with the application, the Mysql connector jdbc should be used instead of the sapdbc.jar; but doing this the Synchronization Manager GUI doesn't start.
Regards!
MY

Hello,
you can create the replication user like this.
"create user dbservice password <your password> dba not exclusive replication"
Did you grant the tables you want to replicate to the replication user?
The replication user itself must not own triggers or tables. It owns special system triggers and repliaction meta tables.
Best Regards
Wolfgang

Configuring Photoshop CS5 to open in 32bit by default for multiple users

I've set up a lab with Photoshop CS5 installed on 60 macs which will be logged on by 1200 domain users and I need Photoshop to open in 32bit mode as default for each user so it will be compatible with our printer. Rather than having to administer PS manually to 32 bit for each user, would I be right in thinking I could create one copy of the Photoshop app set to open in 32bit mode and then copy it to all the other macs to replace the original 64bit configured versions so they would all open in 32bit by default for all users?
Anyone know if this might work or if there is an alternative way?
Thanks for any advice

I was off the mark with this but found the solution. I was informed the preference file to launch in 32 or 64 bit mode is the com.apple.LaunchServices.plist which resides in the user preferences folder. So by configuring the Photoshop app via 'Get Info' to 32bit and copying this out to another users prefs folder then PS opens in 32 bit for that user as well. To get this to work for all users on login I created an automator workflow and dropped it in the App folder of every mac and this is triggered by running it as a login-in items in the computer group in workgroup Manager.

How to enable detail view interactive report as default for public user?

Hello all,
I'm currently developing a search results page.
I'm trying to do a nice view instead of a default table like view from the interactive reports. So in this case i enabled the detail view so i could make fancy designs.
all worked well and looked neat but however when i pass value from my search page using IR_ROWFILTER and clear the results page using page_no,RIR, it brings me to the interactive reports result page with the default table like view.
i have to press the detail view to get it. i tried saving it as default but it wont work. this issue is for public user.
if i make the page requires authentication, and save the detail view as default i would not have any problem. i could search and it will straightly bring to the detail view of the search page.
of course the other reason i found is because im using the IR_ROWFILTER and clearing page using page_no,RIR..without it,it works well but i need it coz im doing a a search result. i need to send search text from another page and put it in the filter in the search page. i would need to use RIR to clear it for searching again.
is this a limitation for public user? it doesnt happened for authenticated user though..
how can i make this view as default for public user?

T101_cyberdyne wrote:
how can i make this view as default for public user?
Flip the report into Detail view on page load using an Page Load dynamic action with the following Execute JavaScript Code true action:
gReport.data.view('DETAIL');
I'm trying to do a nice view instead of a default table like view from the interactive reports. So in this case i enabled the detail view so i could make fancy designs.
Do you really need this to be an IR? Other than the detail layout, do you require any of the interactive features? If not, try using a standard report with a custom report template.

How to block vendor invoice default for a user

Hi Experts,
we want to block all vendor invoices of a particular user. Means when the user post the vendor invoice in FB60, all the invoices are posted but gone for payment block and the payment block option is set default for a particular user.
please advice.
Regards
Aditya
Edited by: Aadi sharma on Jun 28, 2011 2:41 PM

Hi
I do not think the functionality is available as a standard. You can look at the user exit SAPLF051, which comes close to your requirement.
Regards
Sanil Bhandari

How to make custom icc color profile work as default for all users?

Hi!
I've calibrated two monitors for the machine running Mavericks OS X. I've managed to move these custom icc color profiles to ColorSync folder in HDD Library, so that that they are available for all the users. However, I cannot figure out how to make these icc profiles work as default profiles for all users and not only the one I used to calibrate monitors.
Is there a specific place I have to put custom icc profile to make it system default?
Thank you!

If you put the profiles in the root /Library/ColorSync/Profiles/ folder, then each user needs to select them in their account. There isn't a way to apply them globally so each account automatically comes up that way.

How to set an screen variant as default for my user?

Hello,
For example in t-code FB50 we have 4 screen variants. The default screen variant is 1. How can I change the default sreen variant for my user only ?
Thanks,
Alexandre

Hi
Use T.code FB00 and in the document entry tab in screen templates and line layout variant for doc entry enter necassary details
For further details, the following link may be useful:
http://www.r3.duke.edu/stepbystep/journal/3.pdf
Regards
Aravind
Assign points if useful

Problem in second level navigation for some users.

Hello friends,
We have a group with few users, we have assigned certain roles to that group, all the roles are visible to all but the order of second level navigatin has changed for some users and not for all. Please suggest some solution.
Thanks,
Mitts

Hi Mittal,
Is there any merging of roles going on?
When you assign new roles, does the 2nd level navigation contain the same nodes but in a different order, or are there additional nodes added?
Perhaps you can explain in more detail the set up.
Daniel

Make XFCE4 default for all users

I got Arch up and running with XFCE4. its great so far
I am using either xdm or wdm as my login manager (havent decided which i want yet)
I added a ".xinitrc" file to my home folder so that XFCE4 will start when I log in. is there a way to make XFCE4 the default wm for all new users without having to add a .xinitrc file to all of their home folders? I only plan on using XFCE4 so I dont need the login manager to load other wm's. but i would like to be able to add users and have their session automatically start as XCFE. all i have found by googling and on LQ.org is making a .xinitrc file, but these seem to lean toward a single user system. there has to be an easier way, ie with fedora when you make a new user, log out and log in as the new user and it will start the default wm, or you can choose whichever wm you want to use.
im using arch 0.7.2 'gimmick' and all packages have been updated

If you just edit the skeleton file for <code>.xinitrc</code>, then for each user that is created, it will automatically be set to run xfce. The location of the file is <code>/etc/skel/.xinitrc</code> if that answers your question.

Full true Administrator Privileges and rights for New User?

I am wondering how to grant full administrator privileges to a newly created user?
Here is the environment:
Windows 2012 Server 64bit
Not part of a domain <WORKGROUP>
Here is the problem:
I created a new user we will call them "SecondaryAdmin", and made them part of "Administrators" group as well as the "Remote Desktop Users" group.
I login through an RDP session as "SecondaryAdmin", I go to a command prompt, and I run IISRESET and it tells me:
"Access denied, you must be an administrator of the remote computer to use this command. Either have your account added to the administrator local group of the remote computer or to the domain administrator global group."
Additionally, I have IE Enhanced Security turned off, but if I open Internet Explorer while logged in as "SecondaryAdmin" it still displays the IE Enhanced Security warnings.
Also, if I try to copy a file to the root "C:\", it gives me "Access denied error" forcing me to continue with elevated administrator privileges.
If I run the command prompt as "administrator" I can do an IISRESET without error.
If I run Internet Explorer as "administrator" I do not get the warnings.
If I run windows explorer as "administrator" I do not get the access denied.
However, I WOULD NOT trust this "SecondaryAdmin" account to install ANYTHING. Even if you ran the install executable as "admin", often times these install files will fire off secondary scripts that wont be fired off as "admin",
which may lead to incomplete or corrupt installs.
This changed from Windows 2008 R2 to Windows 2012.... If I do the same exact thing in Windows 2008, I am able to do all the above things without prompt or error.
So how can I give a new user true, full, elevated, admin privileges without having to run everything as administrator? Some obscure setting in GPO? Some registry setting (already tried LocalAccountTokenFilterPolicy)?
What I have tried:
UAC is OFF
Firewall is OFF
IE Enhanced Security is OFF
Remote Management/Desktop Enabled
User part of Administrators Group and Remote Desktop Group
Used "netplwiz" to verify user is Administrator
Please help!

Hi Chris,
I appreciate your answers, however, this is not what I am looking for.
I want the "SecondaryAdmin" user, who is part of the Local Admininstrator group, to have full Admin access.
I DO NOT want them to have to do anything special, or have any user intervention.
NO yes/no dialog boxes
NO clicking "Run As Admininstrator"
NO changing shortcuts or executable file properties to always "Run as Admin"
I simply want the "SecondaryAdmin" account, which is part of the "Administrators" group, to have the same access and run the same seamless way it did in 2008 R2, with no user intervention required.
This is what I am looking for.
Kind Regards,
James

PLD Layouts - Identifying which are default for specified users

Hi Experts,
We have around 30 invoice layouts - we are in the process of deleting the older obsolete layouts.
However, some them are set as default layouts for specifc users. I was hoping to write a query to identify layouts and which users have them set as default.
The layout header table is RDOC. Which tables contain the list of users assigned to each layout?
Thanks
Greig

The table where this information is stored is RDFL
SELECT DoumntDode, UserId, DfltReport, CardCode
FROM [dbo].[RDFL]
Sample data
DoumntDode      UserId       DfltReport   CardCode
JDT7              12           JDT70003        -1
RDR1              -1           RDR10003        C20000
DoumntDode = RDOC.DocCode
UserId = OUSR.UserId..........................-1 indicates all users
similarly if CardCode has -1 then specific users all BP's
Suda

Vim reasonable defaults for all users.

now the vim package keeps a less-than-minimal set of default settings. So keeping the old default as starting point I made what I think is a reasonable default:
" Use Vim settings, rather then Vi settings (much better!).
" This must be first, because it changes other options as a side effect.
set nocompatible
" allow backspacing over everything in insert mode
set backspace=indent,eol,start
set history=50 " keep 50 lines of command line history
set ruler " show the cursor position all the time
set showcmd " display incomplete commands
set incsearch " do incremental searching
set listchars=tab:˛\ ,trail:┈ " show trail spaces and tabs
set list
set wildmode=list:longest,full " use the new menus
set wildmenu
set background=dark " who uses white terminals anyway?
"statusline: filename, filetype, mod, rw, help, preview,
set statusline=%t\ %y\ %m%r%h%w
"statusline: separation between lef and right aligned items
set statusline+=%=
"statusline: lines number, column number, percent
set statusline+=[L:\ %l/%L]\ [C:\ %v]\ [%p%%]
set laststatus=2 " always show status line
set highlight+=sn
" Don't use Ex mode, use Q for formatting
map Q gq
" Use space and backspace to scroll the document
map <space> <c-d>
map <bs> <c-u>
" Disable f1, if you need help use `:help'
map <f1> <nop>
map ; :
" CTRL-U in insert mode deletes a lot. Use CTRL-G u to first break undo,
" so that you can undo CTRL-U after inserting a line break.
inoremap <C-U> <C-G>u<C-U>
" In many terminal emulators the mouse works just fine, thus enable it.
if has('mouse')
set mouse=a
endif
" Switch syntax highlighting on, when the terminal has colors
" Also switch on highlighting the last used search pattern.
if &t_Co > 2 || has("gui_running")
syntax on
set hlsearch
endif
" Only do this part when compiled with support for autocommands.
if has("autocmd")
" Enable file type detection.
" Use the default filetype settings, so that mail gets 'tw' set to 72,
" 'cindent' is on in C files, etc.
" Also load indent files, to automatically do language-dependent indenting.
filetype plugin indent on
" Put these in an autocmd group, so that we can delete them easily.
augroup vimrcEx
au!
" For all text files set 'textwidth' to 78 characters.
autocmd FileType text setlocal textwidth=78
" When editing a file, always jump to the last known cursor position.
" Don't do it when the position is invalid or when inside an event handler
" (happens when dropping a file on gvim).
" Also don't do it when the mark is in the first line, that is the default
" position when opening a file.
autocmd BufReadPost *
\ if line("'\"") > 1 && line("'\"") <= line("$") |
\ exe "normal! g`\"" |
\ endif
augroup END
else
set autoindent " always set autoindenting on
endif " has("autocmd")
" Convenient command to see the difference between the current buffer and the
" file it was loaded from, thus the changes you made.
" Only define it when not defined already.
if !exists(":DiffOrig")
command DiffOrig vert new | set bt=nofile | r # | 0d_ | diffthis
\ | wincmd p | diffthis
endif
I put it here hoping it helps you or yours users' vim experience. Please leave any comment.
Last edited by ezzetabi (2009-09-30 13:53:47)

Hi, I think this is not a bad idea. I do like using listchars to show tabs and trailing spaces like that, but I think that using commoly used characters like _ is confusing. If you go into vim and use the :digraph command you can see lots of special characters which are useful IMO for listchars. I use set listchars=tab:→,trail:¸, but I don't know if they'd be best for everyone. But I think it is clearer than using normal keyboard characters.

ASDM Privilege Level default 15 for Radius users

Similar Messages

Maybe you are looking for