ASE 15.7 Job Scheduler won´t start again

Hi,
we encoutered the following problem in our ECC6.0 / EHP5 on ASE 15.7 PL 122 System:
DBACockpit / Collector Configuration shows the warning "The ASE-Job Scheduler is not active". The log SID_JSAGENT shows the following entries:
00:11704:12104:2014/09/01 08:00:35.78 jamain  Opening jsagent connection.
00:11704:12104:2014/09/01 08:00:35.78 jamain  Agent will listen on <IP>
00:11704:12104:2014/09/01 08:00:35.78 jamain  SYB_JSAGENT waiting for connection
00:11704:12104:2014/09/01 08:00:36.72 jamain  Job Scheduler Agent connected with Job Scheduler Task on port 4903
00:11704:12104:2014/09/01 08:00:36.72 jamain  Initializing SYB_JSAGENT
00:11704:12104:2014/09/01 08:00:36.72 jamain  Allocating list resources.
00:11704:12104:2014/09/01 08:00:36.72 jamain  Allocating queue resources.
00:11704:12104:2014/09/01 08:00:36.72 jamain  Allocating thread resources.
00:11704:12104:2014/09/01 08:00:36.72 jamain  Initializing connection pool.
00:11704:12104:2014/09/01 08:00:36.99 jamain  Client message: ct_connect(): user api layer: external error: The connection failed because of invalid or missing external configuration data.
00:11704:12104:2014/09/01 08:00:36.99 jamain  ct_connect() failed.
00:11704:12104:2014/09/01 08:00:36.99 jamain  jsj_AddConxs: jsd_MakeConnection() failed for user jstask to server SID
00:11704:12104:2014/09/01 08:00:36.99 jamain  jsj_CreateConxPool: jsj_AddConxs() failed
00:11704:12104:2014/09/01 08:00:36.99 jamain  Initialization failed initializing connection pool
00:11704:12104:2014/09/01 08:00:36.99 jamain  Jsagent failed to handle INIT message.
00:11704:12104:2014/09/01 08:00:36.99 jamain  JS Agent aborting. Cancel all running jobs.
00:11704:12104:2014/09/01 08:00:36.99 jamain  Job Processing failed.
00:11704:12104:2014/09/01 08:00:36.99 jamain  JS Agent exiting.
Restarting the scheduler on ISQL doesn´t seem to work. Any ideas?
Many thanks & greetings
Vierengel Stefan

Hi,
thank you. Problem was solved by performing the following steps
1.     deleting the following file: DRIVE:\sybase\SID\OCS-15_0\ini\ocs.cfg
2.     Stop / Start Job Scheduler
         exec sybmgmtdb..sp_sjobcontrol '','stop_js'
        go
         exec sybmgmtdb..sp_sjobcontrol '','start_js'
        go
3.     Refresh DBACockpit
Greetings
Vierengel Stefan

Similar Messages

  • My phone turned off out and it won't start again, and it was fully charged. How can I fix it?

    My phone turned off out and it won't start again, and it was fully charged. How can I fix it?

    Thank You! It worked

  • PlayBook froze upon launching Music app and won't start again

    Hi,
    My PlayBook (latest OS update) just stopped to respond, I was using Browser, and when I launched the Music app, the whole system stopped to respond, it stayed on the blue launching screen of the Music app, I pushed the power button and the screen went black, now it just won't start again, I tried to plug it to charge and to usb, all to no avail...
    Long pressing the power button had no effect...
    So I just don't know what to do, did this happened to anyody? Is there a way to reset the tablet?
    Thanks, any suggestions will be welcome!
    Julien
    Web: smugrik.org Follow: @Smugrik
    PlayBook apps:
    OSCream
    kiPass
    Solved!
    Go to Solution.

    Well, my PlayBook finally rebooted and responds normally again...
    I'm still wondering about the reason for such a crash, it is the first time such failure happens on my PB...
    Julien
    Web: smugrik.org Follow: @Smugrik
    PlayBook apps:
    OSCream
    kiPass

  • Crashed while export and won't start again...

    Hi guys, i just want to ask, why my PPro, doesn't want to start, it only shows the startup and then shows the application with white screen, after that it closes by itself. no error message or anything. it started when my laptop crushed while i exporting the movie. the screen went crazy. so i shut down the laptop. after that my PPro CS3 won't start. i try to uninstall and reinstall, still the same...now i've tried the CS4, but still won't work. still remain the same. what's the problem...can anyone help me?it's been 4 months i tried to solve, but still got nothing. please help me...

    Ok...sorry, i'm new in this kind of things. or i can say, this is my first posts in this kind of forum...
    I'm using Laptop. it's ASUS F8VrOS : Windows vista Home premium;
    Platform : intel centrino 2;
    Processor : intel core2 duo P8600 2.4 GHz;
    Chipset : mobile intel PM 45 Express + ICH9M + wiFi link 5100;
    Memory : DDR2 800 MHz, 2 GB;
    Screen : 14,1 inches  WXGA+/WXGA;
    Graphic system : GPU ATI mobility radeon HD 3470, 256 MB memory;
    HDD 250SATA; anything i didn't mention?
    ok, the case is, i use Adobe Premiere Pro CS3 before. i was using it doing my personal project, basically only combining .avi video. it's finished, and then i want to export it as a movie. but when it's still rendering, my laptop crushed, the screen went crazy (looked so colorful(u know what i mean?^^)), then i couldn't do anything. so i just shut it down forcefully. since then on, i can't use the PPro anymore. i've tried to reinstall, still the same. the startup screen still appear (the loading of all .prm file), but when the application come in, it directly shuts down. with no error message. i also install the PPro CS4, but still the same...is it my laptop or the PPro?
    any info i didn't give you, just ask...
    sorry, newbie.....
    thanks for amending me...^^

  • My update with Creative Cloud stopped today..........!! and it won't start again?

    Hi !
    I was about to update the newest update with Creative cloud, - but it suddently stopped, - and it has not started again. And the program Audition was not finnished, - there was a notice to stop something,  like "i.... manager "(I can't remember) , - and I close that. And then everything stopped to update. What shall I do?? See printscreen
    It is 10 hours since this happend, and still it won't update? It still says: Waiting....
    Thank you SOO much

    A chat session where an agent may remotely look inside your computer may help
    Creative Cloud chat support (all Creative Cloud customer service issues)
    http://helpx.adobe.com/x-productkb/global/service-ccm.html

  • HELP thought fixed w/diskwarrior, won't start again

    A hardware check on my powerbook revealed bad memory. I took out the faulty memory card, and have rebuilt the directory with the good one intact using Diskwarrior. So it seems that I should be able to at least start up my computer with the one good memory card while I purchase another, but now during start-up it freezes on "Waiting for Printer Services". Does anyone have any suggestions?

    It won't hurt to try running DW again. But if you had bad memory in the Powerbook, it's entirely possible that more than just your hard disk directory has been damaged: you may have individual files that are damaged, too, and neither DW nor any other disk utility can fix files that have been damaged by partial overwriting, partial erasure, or having gobbledygook written to them, any of which can happen as a result of bad memory.
    If DW continues to give you a clean bill of health but the computer still won't start up, the HD directory is OK, but you probably have damaged files that are essential to the boot process. In that case, it may be necessary to reinstall the OS. Since the directory is sound, an Archive and Install should be sufficient: no need to erase the disk first.
    Note, however, that some of your own files could also have been damaged. You won't find out about that until you try to open a damaged file, and it doesn't. I hope you had backed all important data up before the bad-memory problem appeared.

  • Help! Stuck on white screen after sleep mode and won't start again!

    Bought the iMac last week, updated to 10.5.1. Worked well until this morning after I did a security update. Then put it in sleep mode - and basta! After I wanted to work on it again - it didn't restart. So, I had to switch off using power button, but it never started again and always got stuck on the white screen with the Apple logo and the rotating loop. Tried to repair permissions - cannot do it, as it says there is an error. Tried to re-install from DVD the Leopard while archiving the previous information - can't do either - says error. Now trying to re-install it again with an erase option. But this is not a good option, people! This is pretty very much disappointing, Apple!
    Can anyone help, please!

    Boy that is way too bad.
    Could you tell us what the error message was?
    While sometimes the error messages are not very informative, other times they are. That might be a clue as to what is going on.
    When you restart from the DVD you have the option to access Apple's Disk Utility and repair the disk.
    You might want to try that, skip repairing permissions at this point.
    You can also reset the computer by unplugging all cables including the power cable for at least 15 seconds and then plug in the power cable and keyboard and restart.
    You can reset the PRAM by holding down the command-option - p - r keys simultaneously during restart and waiting for the startup chime then releasing those keys after the second chime to allow the start to continue.
    HTH

  • ITunes Won't Start, Popped Up Out of the Blue, Then Crashes and Won't Start Again.

    I was listening to iTunes Radio on my laptop and I didn't notice it had stopped. I tried to reopen but it wouldn't so I restarted my laptop which used to work, but now it will not open at all. I have tried the REPAIR option, I have tried to uninstall and reinstall several times. I have also done the same thing with Quicktime player. I have read all the other post and tried what they suggested  and none have helped. I have called apple support and she had me do the same thing I had already done. Is there anyone that can help me it's rather upsetting for me to have spent money on the 5th generation iPod and not be able to upload music or anything. I dont know if it matter but I have a Dell Inspiron Laptop on Windows 7.

    Max5fire wrote:
    The display is gray with an apple icon in the center and a circulating loop. 
    There is a status bar below with nothing happening.
    Gray screen issue with stuck status bar.
    Could be two things, a failed firmware update or a automatic "Safe Mode" kicked in while booting and is attempting to repair the drive of corruption and it got stuck.
    She can't find her discs to boot from disc.  She has a 15" MacBook Pro, about three years old.
    I have a install dvd from an early 2009 macbook.
    Can I install the operating system and run disc utility to see if it can be repaired?
    Nope, your disk is machine hardware driver specific if it's anything other than white with a Snow Leopard on the front.
    Her machine might have came with 10.6.3 or later, which the 10.6.3 white retail disk won't work.
    If it originally came with 10.6.2 or earlier, then the 10.6.3 white retail disks can be used.
    Well your going to have to call Apple via phone (only) and talk to them, perhaps they can find out something about the machine that tells them what 10.6 disks to send her.
    No use going on until then.
    However if you have a Firewire cable to the two Mac's, then hold T boot the sick Mac, then boot the good Mac, may able to grab files off the machine as it's hard drive appears on the desktop..
    When you get the disks look here
    Step by Step to fix your Mac
    Most commonly used backup methods
    Create a data recovery/undelete external boot drive
    How to erase and install Snow Leopard 10.6
    Good Luck

  • My iPod shuffle stops playing after a few songs, then it won't start again.

    My iPod shuffle will stop playing after a few songs which is very frustrating while out walking.  I end up having to shut it off for about a minute or two and then turn it back on.  Sometimes it will start playing again, but it will start playing the same songs over again.  I can't go forward or go back.  When I try to skip a song, all I get is dead air.  I took it back to an Apple store and they replaced it free of charge; which I thought was great... that is until the new iPod started doing the exact same thing.  I've downloaded songs from the iTunes store as well as songs off of my personal CD's.  I've tried deleting all the songs and re-installing them... nothing seems to solve this problem.  I know it only costs $50; but if Apple can't get a $50 item to work; why in the world would I want to invest more money in an Apple product?  It's a good thing this was a gift.... I'm just not happy with this product and there doesn't seem to be a good explanation for this.

    I Just ran into the same issue:
    My iPod shuffle 4th gen would just stop playing, and I had to turn it off, wait 10 secs and the turn it back on.
    Then it would get stuck at the same place.
    I Even exchanged the iPod for a new one since I had just bought it.
    re-synced my playlist and same issue!
    did a restore as described above - same issue.
    Solution in my case:
    one of the songs in my playlist seems was "corrupt". Even trying to play the song in iTunes on the PC did not work, kept getting the message "This computer is not authorized ....", even though the computer is authorized.
    So somehow that song being on the shuffle crashes it.
    After I removed that song from the playlist and synced again, the problem was resolved!
    So try to play all the songs that you want to sync to your shuffle on your computer, maybe you have one song that was not downloaded properly or is otherwise corrupt.
    - Deleted the song from the local library
    - re-downloaded the song from iTunes store
    - now it was playing fine on the PC in iTunes
    - re-added it to the playlist, re-synced iPod shuffle
    all is working fine now, shuffle no longer freezes.
    hope that helps someone else....

  • G770 won't start again

    I already had this issue. Someone told me to power purge it, and then the laptop could start. Now the problem is back again.
    So, when I turn it on, all the lights (that should) turn on, but the screen doesn't. Every few days (I think) I can turn it on again, I did it 2 days ago (after a 2 or 3 week break). All was fine until I closed the laptop (so it went to hibernation or whatever), and then it didn't work.
    Sometimes the screen doesn't start, and sometimes the laptop keeps restarting every few seconds (screen still doesn't turn on). I'm thinking of running it (when I can), and doing a disk check, or formatting the drive and reinstalling Windows etc.

    Hi conegib,
    Problem's back, huh?
    How about disabling hibernation and see what happens.
    Running chkdsk isn't a bad idea either.  See if it comes up with any errors.
    You could try running a live linux on a flash drive and check the hard drive.
    Dave
    T430u, x301, x200T, x61T, x61, x32, x41T, x40, U160, ThinkPad Tablet 1838-22R, Z500 touch, Yoga Tab 2 Windows 8.1, Yoga Tablet 3 Pro
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
    If someone helped you today, pay it forward. Help Someone Else!
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • Mac power mac g5 won't start again

    today is happen again, when I start up my g5 I could see the led is on, but no start up sound, and it stays like that forever. is it because my room is too cold? I thin it's like 10c in my room

    Dear Roy,
    If it is 10 degrees in your room, then I think you will also not start up again after a few hours or do you wear ski clothes?
    Normally the temp. would not be the problem.
    What is connectted to your computer?
    Did you add extra memory?

  • I have rented a movie on Apple TV. Part way through, it started jumping and breaking up. Eventually it quit and Apple TV won't start again.

    Help please

    Try a restore through iTunes
    http://support.apple.com/kb/HT4367?viewlocale=en_US&locale=en_US

  • After closing Illustrator, it won't start again

    Hi,
    I'm running Illustrator CS5 on a 64-bit Windows 7 PC (fully updated). The user in question is local administrator on her computer.
    Symptoms are as follows:
    I close Illustrator in the normal way (via X or File > Exit)
    I then attempt to open Illustrator again, and it freezes during startup while showing "Initializing plug-ins... Illustrator.exe" (it also does it on swfexport.aip from time to time).
    I have tried deleting prefs, re-installing etc. to no avail.
    I can't recreate the problem on a different user on the same computer, so it's clearly a setting somewhere.
    Can anyone guide me in the right direction?
    Thanks,
    Thomas

    Hi Thomas,
    You mentioned that "But yes, it opens once and any attempt after that will fail."
    Do you mean to say that even on a new user profile you are getting crash on further attempts to launch?
    Regards,
    Dhirendra

  • Why job queue can't start?

    DB: Oracle 9i Enterprise Edition Release 9.2.0.5.0
    Platform: Windows 2003 Server
    I imported several job queues from another oracle DB, after submit them, it seems everything is ok. But it can't start automatically upon reach time. (Should be run every 2 minutes)
    I check the dba_jobs view, BROKEN = N, INTERVAL = ‘sysdate + 2/60/24’,FAILUERS=0. And I can successfully execute the job by DBMS_JOB.RUN(job_no), but it won't start again after next time reach.
    CONNECT, RESOURCE and SELECT_CATALOG_ROLE privilege were granted to job owner, and JOB_QUEUE_PROCESSES parameter was set to 10. JOB_QUEUE_INTERVAL wasn't set in init.ora file.
    no relative error was found in alter.log file.
    Thanks.

    even there's no job runing you should still see this process after you set
    JOB_QUEUE_PROCESSES
    if you select from v$process you should see some process like this
    oracle@yourhost (J000)
    I don't have a Window platform to test this, because in windows Oracle is threaded instead of having seperate processes
    How Jobs Execute
    Jnnn processes execute jobs. To execute a job, the process creates a session to run the job. When a Jnnn process runs a job, the job is run in the same environment in which it was submitted and with the owner's default privileges. The owner must be explicitly granted the necessary object privileges for all objects referenced within the job definition.
    When you force a job to run using the procedure DBMS_JOB.RUN, the job is run by your user process and with your default privileges only. Privileges granted to you through roles are unavailable. You must be explicitly granted the necessary object privileges for all objects referenced within the job definition.
    http://download-west.oracle.com/docs/cd/B10501_01/server.920/a96521/jobq.htm#991

  • ITunes won't start

    I checked support and deleted what they told me to and then restarted my computer. iTunes will open, but when I close it, it won't start again once I try to click on the icons. I tried everything. I restarted my computer three times and re updated the iTunes and nothing will work. I found this out trying to get the iTunes store to work because it didn't download my previous purchases from the store. Every time I restart, iTunes will work, but once you close iTunes, it will not start up again. Even when I deleted iTunes completely and tried redownloading iTunes, it was acting weird. It said that iTunes was still on and asked if I wanted to proceed, even though iTunes was not running. I did not know updating the iTunes would cause my whole iTunes to crash. I'm now hesitant to update my laptop's iTunes. Please help! This is complete BS if Apple makes an update that won't even work!

    hi Nikki!
    "The iTunes Music Library.itl file is locked, on a locked disk, or you do not have write permission for this file."
    hmmm. first let's try Buegie's trick here:
    Buegie, "iTunes 4.9 and Windows Vista Beta 1" #1, 12:29pm Jul 30, 2005 CDT
    ... but if that doesn't work for you, let's quickly check up on something. go into your start menu and do a file and folders search for "My Music". how many of those folders do you find?
    love, b

Maybe you are looking for