ASG_START_EVENT_IND should update all to 0 if TERM

I am facing this scenario
ASSIGNMENT_ID
ASG_START_EVENT_IND
W_EVENT_SUBG_CODE
EVENT_CODE
4897
1
ASG~START
ASG~START
4897
0
TERM~INVOLUNTARY
TERM~INVOLUNTARY~I-RESIGN~ON~AGREEMENT
ASG_START_EVENT_IND should update all to 0 if TERM, but oracle doesn't do that.
I think this doesn't make sense and cause
ORA-01452: cannot CREATE UNIQUE INDEX; duplicate keys found
Any advise?

Thanks. Have you upgraded the firmware in your unibody mbp? I ran all software updates as soon as I got the machine last week, but the Hitachi 500gb HTS545050B9SA02 drive seems to be working ok. I was going to get the seagate momentus 500gb 7200.4 without G, copy an image to it by putting it in my external sata 2.5 enclosure, and simply swapping the drives over with OS ready to roll. The stock Hitachi drive would then become my carbon copy cloner / time machine back-up drive.

Similar Messages

  • I have 51 apps that were indicated need for updating.  Clicked update all and now there is only a very slow progression thru the apps.  Why so slow?  Should apps be updated one at a time?

    I have 51 apps that needed updating.  I clicked update all and then they began to very slowly update.  Very slow. Is this usual?  Should I update one app at a time and do I really need to do all this updating all the time?  It's time consuming or am I doing something wrong?

    51 apps is a lot, it could take time.  It also depends on the local network and how busy it is.  Many users have complained today that they can access contacts, calendars, and/or email - maybe there are server problems right now (and today is the big Apple announcements, so things may be in flux).
    When I have a lot of apps to update, I do it using iTunes on my mac.

  • Had a hard time all of sudden opening photos in PS via Bridge. Updated all my software and now halfway through editing a photo, my actions don't work properly. Should I remove all programs and re-install?

    Had a hard time all of sudden opening photos in PS via Bridge. Updated all my software and now halfway through editing a photo, my actions don't work properly. Should I remove all programs and re-install?

    <moved from Adobe Creative Cloud to Photoshop General Discussion>

  • When trying to upgrage my iPhone, it indicates that I will loose all data and apps and that I should update using the computer that I previously sync'd with.  I no longer run that computer.  What can I do so that I don't loose all my apps?

    When trying to upgrade my iPhone to iOS5, it indicates that I will loose all data and apps and that I should update my iPhone using the computer that I sync'd with originally.  I no longer use this computer and how can I sync with my new on and not loose my apps?

    Great question.  I have the same issue.  Any ideas?

  • I bought a second hand G4 iBook with iLife 09 on it.  I have copied iLife to my new Macbook Pro. The applications would not open, so I did a software update and update all three applications, but they will still not open.  Can anyone help?

    I bought a second hand G4 iBook with iLife 09 on it.  I have copied iLife to my new Macbook Pro. The applications would not open, so I did a software update and update all three applications, but they will still not open.  Can anyone help?

    The seller should have given you the original disk so that you can reinstall as needed. But it likely was a single-user license (which really means single computer) so you can only have a copy on one computer at a time. If the seller didn't give you the disk he is probably still using the software on his new Mac. Your best option to get any of the iWork apps to use in OS X 10.6.6 or later is through the Mac App Store. You can then install them on any Mac you have that has access to the Mac App Store using your Apple ID.

  • TS3274 My App Store shows 3 updates but when I go to it the screen is blank. It will not give me the option to update all or one at a time, it doesn't show the apps at all.

    My App Store shows 3 updates but when I go to it the screen is blank. It will not give me the option to update all or one at a time, it doesn't show the apps at all.

    Many people are having this problem for the last couple of days. This is a problem that Apple has to fix. If you look around the forum, you will see many, many discusssions about this and they have been going on for a few days.
    According to Fly150 in another discussion, this is a workaround - for the time being.
    If you want to update the Apps while waiting for Apple to fix Updates:
    1. Go to App Store
    2. Select Purchased
    3. Select All
    4. Scroll down to find the Apps showing update
    5. Select update on the Apps
    This should update the Apps and get rid of the update count in App Store.

  • Turned on my ipod. Said update available. Updated fine,now stuck on terms and conditions. Will not allow me to accept, and now I cannot turn my ipod off. It is literally froze. Any suggestions.

    Turned on my ipod. Update available.  Updated fine, came to accepting terms and conditions and this is where it all went wrong. Stuck, cannot accept and cannot turn off the the ipod.  It is stuck on the terms and conditions. Uninstalled itunes on my computer and reinstalled accepting the terms and condition in my computer. Pluged in my ipod, but still nothing.  Just stuck on the terms and conditions.  Any suggestions would be greatly appreciated.

    Let the battery fully drain till the iPod turns off.
    Then place it in Recovery Mode for a full restore. (Setup as new when done)
    How to enter Recovery Mode:
    http://support.apple.com/kb/HT1808

  • Apps icon shows updates when i go there the update all icon is not highlighted if you go to any of the UPDATE box's you are directed to the application????

    apps icon shows updates when i go there the update all icon is not highlighted if you go to any of the UPDATE box's you are directed to the application????

    ATtempt to power off your device and power it back on, if that doesn't work reset all settings should resolve it for you

  • FI_ITEMS_MASS_CHANGE failing to update all items of BSEG

    Hi All,
    I am facing problem using FM FI_ITEMS_MASS_CHANGE while updating multiple line items of BSEGfor text and assignment.The program is posting FI document by calling transaction FB05. The requirement is to update all the itmes of clearing document with predefined text , assignment which is coming from excel.
    The program currently gets the clearing doc number from FB05; gets the BSEG table entries and loops the items one by one. For every loop of BSEG the FM FI_ITEMS_MASS_CHANGE is called to update text and assignment fields in corresponding item of BSEG.So expectedly all the items should be updated with the text , asignment.
    But problems is that only first item is updated and rest are not updated. I have added wait time of 5 seconds to avoid locking of tables in case if any. But still the change is not working. The results after wait time additon are inconsistent. In developemnt the changes worked for 7-8 items while  it failed in quality even for only 2 items.
    The FM possibly calls FB02 internally. Is there any locking happening?
    Anybody has any suggestion?
    Thanks in Advance.
    Regards,
    Chirdip

    Hi,
    I am also facing the same problem while updating ZUONR filed in BSEG.
    FI_ITEMS_MASS_CHANGE is not updating all the line items in bseg. I called the FM inside loop-endloop at item table.
    Still few items(randomly) are updating in first executuion of my program. Few in 2nd execution an so on.
    I tried using COMMIT WORK and WAIT statements after calling the FM, but of no use!!
    Please suggest is there any other way to update all the items in a single execution??
    Otherwise do I have to go for BDC on FB02 ??
    Thanks,
    Sagar

  • Update (All Mapped Fields) Import Action creates a new record.....

    Hi All,
    I am on MDM 5.5 sp6,and this weird thing happens everytime i run the "update all mapped fields" option in the import manager,it creates a new duplicate field with the updated value record.Is this  a bug in sp6 or I guess i am going wrong somewhere.I want to update a particular field in the qualified table and i am using a import file which has values for qualified field on the main table and the values for the qualified table itself.
    Any Help greatly appreciated
    Thanks

    Hi Aravind,
    I am on MDM 5.5 sp6,and this weird thing happens everytime i run the "update all mapped fields" option in the import manager,it creates a new duplicate field with the updated value record.Is this a bug in sp6 or I guess i am going wrong somewhere.I want to update a particular field in the qualified table and i am using a import file which has values for qualified field on the main table and the values for the qualified table itself.
    MDM should not behave in this way. I thing there is an issue with the Matching Field you have choosen.
    I think you have choosen all the FIeld as the Matching Field ( Tab) while IMporting.
    Hence any change in any value, creates another dupliacte record( which we do not want)
    Please select any Field with unique values ( like the Material ID, Customer ID etc) which will ensure that the particular records are updated with the new Values coming in.
    You will find the new value getting updated for the records which are already present. It will not create a duplicate record
    Hope it helps.
    *Please reward points if helpful
    Thanks and Regards
    Nitin Jain

  • [PlayBook] Sort-order of "MyWorld", "Update all" and notificati​ons

    One of the things that bugs me when using the App World on my PlayBook is the fact, that when the "My World" tab features updates, I have to scoll through the whole list to see which Apps got updates and apply them.
    Would be much better if they were on top of the list just like on Android 2.2+ devices because it's much usable interface.
    Also, an "Update all" button is missing. Because there are no automatic notifications that tell you (without opening the App World App) that there new updates available, it's possible that you only check for updates once a week or less frequent. Then when you check, there are so many updates that clicking those update-buttons makes you angry (or at least annoyed .
    So three things an update of the App World on the PlayBook should cover:
    1) display Apps in My World that got updated on top of the list,
    2) check for updates in the background and notify the user via notifications and
    3) add an "Update all" button to click one instead of ten buttons.
    Check out my apps in the BlackBerry World
    Visit my developer blogs /dev/alopix and /home/alopix
    BBM Channel: C0047B612

    Did anyone think about the update all button?
    It's still missing in OS 2 but after just having to approve some updates, it continues to be one of the things that would be nice to have
    Check out my apps in the BlackBerry World
    Visit my developer blogs /dev/alopix and /home/alopix
    BBM Channel: C0047B612

  • In ESS/ MSS Leave should update w.e.f leave applied date

    Hi All,
    My client requirement is.....
    Employee applied (on 30th April 2014) for future date i.e 20th May 2014 to 23rd May 2014.
    Employee applied on 30th April 2014
    Manager approved on 1st May 2014.
    Once Manager approved it should not update IT2006 - Absence Quota.
    It should update on 20th May 2014. After Planned work schedule,
    Can we configure or not. (Standard SAP not support I knew this)
    If Yes......tell me the a few configuration map.
    Regards
    Anoku

    In standard there is no functionality to post the only current day leaves which are in APPROVED status.
    Once this RPTARQPOST run in back ground it will post all APPROVED status records in IT 2001 / 2002.
    In your case, you nee to make RPTARQPOST to Z and modify the code to include your business logic for posting only current day leave i.e begin date <= sy-datum leaves.
    check the report in RPTARQPOST debug mode at below code lines.
    IF ign IS INITIAL.
    *   Get requests having status APPROVED and ERROR
        PERFORM get_requests
          USING
            c_arq_reqtype
          CHANGING
            req_tab.
      ELSE.
    *   Get only requests having status APPROVED
        PERFORM get_approved_requests
          USING
            c_arq_reqtype
          CHANGING
            req_tab.
      ENDIF.
      PERFORM process_all_requests
        USING
          cl_pt_arq_const=>c_app_id.
    In above code line you can remove the records in table req_tab  with your validations before calling the PERFORM process_all_requests.

  • Problem to update all folders

    Hi!
    I have a problem with my mailbox.
    I have created several different folders in my mail to streamline all incoming e-mails.
    and now i can't update all my folder in one time.
    if I will update incoming folder my iphone will updated ONLY general incoming folder, but it wouldn't update subfolders.
    so i have to update incoming folder at first and after that all subfolders one by one.
    Could you  advise me what should i change in the settings to update all my folders in one time?
    thanks in advance,
    Sevastyan Kitaev

    I have had no such problem. You can also ways backup up your iTunes library in case you have a problem so yu can just restore the library.
    iTunes: Back up your iTunes library by copying to an external hard drive

  • Problem to update 16 rows, it updates all rows in table

    I tried to update 16 rows with AL as divion name with the script as below:
    Update wire_center a set a.wg_id='63'
    where EXISTS (select b.div_name from wire_center a, division b, district c, ns_workgroups d
    where B.DIV_NAME='AL' AND a.dis_id=c.dis_id and b.div_id=c.div_id and d.wg_id=a.wg_id );
    When I run it, it updates all the rows in the table.
    However when I run the select subquery, it returns 16 rows.
    It seems where EXISTS is the problem. if I take exists out, it gave me ora-00936 error.
    How to fix it? Please need urgent help. db is 10g.
    Thanks in advance.

    If I understand correctly what you want, you should not include wire_center again in the second select (in your exists clause).
    The second select has no relation to the table you are updating, so because the second select returns 16 rows, the exists will always be true. For every row. So every row will be updated.
    Instead of
    Update wire_center a set a.wg_id='63'
    where EXISTS (select b.div_name from wire_center a, division b, district c, ns_workgroups d
    where B.DIV_NAME='AL' AND a.dis_id=c.dis_id and b.div_id=c.div_id and d.wg_id=a.wg_id );try this:
    Update wire_center a set a.wg_id='63'
    where EXISTS (select b.div_name from division b, district c, ns_workgroups d
    where B.DIV_NAME='AL' AND a.dis_id=c.dis_id and b.div_id=c.div_id and d.wg_id=a.wg_id );Edited by: theoa on 29-dec-2010 14:27

  • Where Did "Update All" Go?

    It used to be that when I had multiple apps that needed to be updated, there was an option in the App Store to "update all."  They would then update in the background without the need for any more input.
    Recently though, that option seems to have diappeared.  At the top of the screen, there are two buttons: "All" and "Not On This iPhone."  To update those which show a need for updating, I have to scroll down a long list, and then update one at a time.  Worse, each time I update one, the phone kicks back out to the main screen showing that particular app loading and then installing the update.  To update another one, I have to go back into the App Store, scroll down the list, and repeat the routine again over and over for each app.
    Did something in the software change, or is there something I can do to get the convenient "Update All" option back?

    They would only be where you put them.
    You should be importing them to your computer regularly as you would with any digital camera, most especially before any update.
    If you failed to do this, then they are likely gone.
    You can try a restore from backup.

Maybe you are looking for

  • How do I clear all personal data bookmarks history etc and import data from safari

    I have a MacBookpro 10.6.8 and I am trying to clear ALL personal data on my new Firefox 12 (Bookmarks History etc) and then import all settings from my Safari. I've deleted the Firefox application as well as Library/application support/mozilla and Fi

  • Is it possible to copy the artists that I added through iTunes to my music files to the actual files? If so, how?

    Hello community, I edited the artists through iTunes, but it did not edit the actual mp3 file on my computer. Is it possible to convert the artists I have edited through iTunes to be able to have the artists on the actual mp3 files instead of just in

  • How to create a check-out form

    Hi there, I'm really hoping someone out there can give me some advice!! I'm building my site in Muse and have Business Catalyst ecommerce. My products are essentially quite simple, but each product has variables like size, colour, etc. I am wanting t

  • Catch event when Application Server is shutdown

    Hi All, Actually I want to catch an event do something when weblogic server is shutdown. How can I catch the event. Any help would be highly appreciated. I tried by implementing ServletContextListener interface, but in that I can only catch the event

  • Modify SQL query in Crystal Reports 2013

    Bonjour, Je voulais savoir s'il était possible de modifier la requête SQL dans Crystal Reports 2013, car les bases de données de notre application pour bibliothèque utilise un format de date particulier qu'il nous faut corriger directement dans la re