Asha 201 - Disconnect from internet

I have searched other threads but cannot find an answer.  I have no applications running but the internet is running.  How do I disconnect from the Internet?  If this is directly related to WhatsApp, then how do I switch it off.  Their webside is not too helpful.   I only want to connect to the internet when I want to connect.  I cannot afford to have the internet running all the time.

WhatsApp needs a data connection established and overides device standard protocols, but this doesn't mean data being consumed all the time; unfortunately if this is an issue you will have to un-install this application.
Happy to have helped forum in a small way with a Support Ratio = 37.0

Similar Messages

  • My 1st generation Time Capsule/2007 keeps shutting off and disconnecting from internet?  What could be the problem?  How long do the Time Capsules usually last?

    My 1st generation Time Capsule/2007 keeps shutting off and disconnecting from internet?  What could be the problem?  How long do the Time Capsules usually last?

    That it is still working is miraclous.. most have died.. lots started flaking out at 18months to 2years..
    See deadtimecapsule.org
    The few that remained now seem to have reached EOL.. you can repair if you have some skills.. fairly cheaply.
    But it is well and truly time to replace.
    https://sites.google.com/site/lapastenague/a-deconstruction-of-routers-and-modem s/apple-time-capsule-repair

  • WebStart Fails to load cached app when disconnected from internet under Apple OS-X

    Java WebStart broken under OS-X
    Our Java WebStart application fails to re-launch when disconnected from the internet.
    Instructions:
    Running OS-X 10.8 or 10.9 with internet connected.
    Launch a WebStart application (e.g.. from http://www.dsuk.biz/Downloads/SmartType/SmartType2.0.19/APPLICATION.JNLP)
    Disconnect from internet.
    Relaunch the application either with the downloaded JNLP file or the installed desktop shortcut.
    I get "Unable to launch application" error with following exception:
    java.net.UnknownHostException: www.dsuk.biz
      at java.net.AbstractPlainSocketImpl.connect(AbstractPlainSocketImpl.java:184)
      at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:392)
      at java.net.Socket.connect(Socket.java:589)
      at java.net.Socket.connect(Socket.java:538)
      at sun.net.NetworkClient.doConnect(NetworkClient.java:180)
      at sun.net.www.http.HttpClient.openServer(HttpClient.java:432)
      at sun.net.www.http.HttpClient.openServer(HttpClient.java:527)
      at sun.net.www.http.HttpClient.<init>(HttpClient.java:211)
      at sun.net.www.http.HttpClient.New(HttpClient.java:308)
      at sun.net.www.http.HttpClient.New(HttpClient.java:326)
      at sun.net.www.protocol.http.HttpURLConnection.getNewHttpClient(HttpURLConnection.java:1167)
      at sun.net.www.protocol.http.HttpURLConnection.plainConnect0(HttpURLConnection.java:1103)
      at sun.net.www.protocol.http.HttpURLConnection.plainConnect(HttpURLConnection.java:997)
      at sun.net.www.protocol.http.HttpURLConnection.connect(HttpURLConnection.java:931)
      at sun.net.www.protocol.http.HttpURLConnection.getInputStream0(HttpURLConnection.java:1511)
      at sun.net.www.protocol.http.HttpURLConnection.getInputStream(HttpURLConnection.java:1439)
      at com.sun.deploy.net.HttpUtils.followRedirects(Unknown Source)
      at com.sun.deploy.net.BasicHttpRequest.doRequest(Unknown Source)
      at com.sun.deploy.net.BasicHttpRequest.doGetRequestEX(Unknown Source)
      at com.sun.deploy.cache.ResourceProviderImpl.checkUpdateAvailable(Unknown Source)
      at com.sun.deploy.cache.ResourceProviderImpl.isUpdateAvailable(Unknown Source)
      at com.sun.deploy.cache.ResourceProviderImpl.getResource(Unknown Source)
      at com.sun.deploy.cache.ResourceProviderImpl.getResource(Unknown Source)
      at com.sun.javaws.Launcher.updateFinalLaunchDesc(Unknown Source)
      at com.sun.javaws.Launcher.prepareToLaunch(Unknown Source)
      at com.sun.javaws.Launcher.prepareToLaunch(Unknown Source)
      at com.sun.javaws.Launcher.launch(Unknown Source)
      at com.sun.javaws.Main.launchApp(Unknown Source)
      at com.sun.javaws.Main.continueInSecureThread(Unknown Source)
      at com.sun.javaws.Main.access$000(Unknown Source)
      at com.sun.javaws.Main$1.run(Unknown Source)
      at java.lang.Thread.run(Thread.java:744)
    I have reproduced with Java build 1.8.0-b132 and 1.7.0_51
    Java Web Start 11.0.2.132
    Using JRE version 1.8.0-b132 Java HotSpot(TM) 64-Bit Server VM
    Re launching the application under Windows 7 when disconnected from the internet seems to work fine (tested in virtual Windows 7 64 bit VM under Parallels). It used to work fine on OS-X!
    RANT/QUESTION
    WebStart over the last two years has given me no end of headaches with deployed applications mysteriously breaking when either Oracle or Apple have made changes. So far WebStart just has not been a reliable and robust means of deployment.
    Is WebStart to be taken seriously as a deployment vehicle for a commercial application or should I be looking at other solutions?
    Also: How do I report bug to Oracle? Do you have to pay for support in order to report bugs?

    Java WebStart broken under OS-X
    Our Java WebStart application fails to re-launch when disconnected from the internet.
    Instructions:
    Running OS-X 10.8 or 10.9 with internet connected.
    Launch a WebStart application (e.g.. from http://www.dsuk.biz/Downloads/SmartType/SmartType2.0.19/APPLICATION.JNLP)
    Disconnect from internet.
    Relaunch the application either with the downloaded JNLP file or the installed desktop shortcut.
    I get "Unable to launch application" error with following exception:
    java.net.UnknownHostException: www.dsuk.biz
      at java.net.AbstractPlainSocketImpl.connect(AbstractPlainSocketImpl.java:184)
      at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:392)
      at java.net.Socket.connect(Socket.java:589)
      at java.net.Socket.connect(Socket.java:538)
      at sun.net.NetworkClient.doConnect(NetworkClient.java:180)
      at sun.net.www.http.HttpClient.openServer(HttpClient.java:432)
      at sun.net.www.http.HttpClient.openServer(HttpClient.java:527)
      at sun.net.www.http.HttpClient.<init>(HttpClient.java:211)
      at sun.net.www.http.HttpClient.New(HttpClient.java:308)
      at sun.net.www.http.HttpClient.New(HttpClient.java:326)
      at sun.net.www.protocol.http.HttpURLConnection.getNewHttpClient(HttpURLConnection.java:1167)
      at sun.net.www.protocol.http.HttpURLConnection.plainConnect0(HttpURLConnection.java:1103)
      at sun.net.www.protocol.http.HttpURLConnection.plainConnect(HttpURLConnection.java:997)
      at sun.net.www.protocol.http.HttpURLConnection.connect(HttpURLConnection.java:931)
      at sun.net.www.protocol.http.HttpURLConnection.getInputStream0(HttpURLConnection.java:1511)
      at sun.net.www.protocol.http.HttpURLConnection.getInputStream(HttpURLConnection.java:1439)
      at com.sun.deploy.net.HttpUtils.followRedirects(Unknown Source)
      at com.sun.deploy.net.BasicHttpRequest.doRequest(Unknown Source)
      at com.sun.deploy.net.BasicHttpRequest.doGetRequestEX(Unknown Source)
      at com.sun.deploy.cache.ResourceProviderImpl.checkUpdateAvailable(Unknown Source)
      at com.sun.deploy.cache.ResourceProviderImpl.isUpdateAvailable(Unknown Source)
      at com.sun.deploy.cache.ResourceProviderImpl.getResource(Unknown Source)
      at com.sun.deploy.cache.ResourceProviderImpl.getResource(Unknown Source)
      at com.sun.javaws.Launcher.updateFinalLaunchDesc(Unknown Source)
      at com.sun.javaws.Launcher.prepareToLaunch(Unknown Source)
      at com.sun.javaws.Launcher.prepareToLaunch(Unknown Source)
      at com.sun.javaws.Launcher.launch(Unknown Source)
      at com.sun.javaws.Main.launchApp(Unknown Source)
      at com.sun.javaws.Main.continueInSecureThread(Unknown Source)
      at com.sun.javaws.Main.access$000(Unknown Source)
      at com.sun.javaws.Main$1.run(Unknown Source)
      at java.lang.Thread.run(Thread.java:744)
    I have reproduced with Java build 1.8.0-b132 and 1.7.0_51
    Java Web Start 11.0.2.132
    Using JRE version 1.8.0-b132 Java HotSpot(TM) 64-Bit Server VM
    Re launching the application under Windows 7 when disconnected from the internet seems to work fine (tested in virtual Windows 7 64 bit VM under Parallels). It used to work fine on OS-X!
    RANT/QUESTION
    WebStart over the last two years has given me no end of headaches with deployed applications mysteriously breaking when either Oracle or Apple have made changes. So far WebStart just has not been a reliable and robust means of deployment.
    Is WebStart to be taken seriously as a deployment vehicle for a commercial application or should I be looking at other solutions?
    Also: How do I report bug to Oracle? Do you have to pay for support in order to report bugs?

  • After installing visual studio, I get continuously disconnected from internet

    Hi all.
    I just installed Visal Studio 2013 Community on my new Acer R13 with W8 Pro. After installation, I get continuousy disconnected from internet. It seems to be something with the virtual adapter that VS creates in order to run WP emulators. Some times I have
    to wait a minute or two and the connection comes back up, but sometimes I have o restart my system in order for it to work. Has any one run into this? Any suggestions?
    The same thing happend o me on my old latop, a Samsung Chronos Serires 7. I used to think it was a problem with that compuer, but now it seems like a VS or Windows issue.
    Thanks.
    :. HUGONNE .: Please mark as answer if the post helps. Coding tips - http://hugonne.blogspot.com/

    Hi Hugonne,
    Based on your issue, to check this issue is related to the VS IDE or your Windows OS, I suggest you could try to install same version of VS on other machine check the issue.
    (1) If you get same issue, I suggest you can try to repaid or re-install the VS2013 Community and then reset the VS setting check this issue.
    (2) If you did not get same issue, I suggest you try to check your network connections on your windows. If the network connections did not have issue, maybe you will need to repair or re-install your OS check this issue again.
    Best Regards,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Install SL OS and a boot camp as disconnected from internet?

    i am considering installing an install of Snow Leopard and Boot Camp Windows XP on a hard drive in my Mac Pro and i am wondering if i can keep this disk/OS disconnected from the internet.
    i am assuming that Safari and Mac mail will come pre-loaded with the OS but i am wondering if there is a way to keep this a very stripped down without all the annoyances of being connected.
    my other OS's are utilizing the world wide web in this machine.
    TIA

    Since I do absolute nothing with anything from Microsoft, I am going to have to guess here on that and say that I doubt it seriouslly.
    There must be a way to turn off the network under Windows I would guess in a similar way that I suggested for OS X is also my guess. Exactly how to do that would take someone more knowledgable with Windows then me. Sorry.
    Allan

  • Disconnection from internet behind WRT54G V2.2

    I have two computers at home with both access to WRT54G V2.2 wirelessly. 
    Since the first day i set up the router, both of my computers get disconnected from the internet from time to time. It is very irritating. The two computers are still connected to the router but no data is exchanged with the ISP,for example, both the computers usually will get disconnected from the MSN one after the other. Then, try to connect tp the MSN but it wont be possible. Everytime, i need to do troubleshooting on MSN and the DNS and Wireless part always fail. I will have to click the repair button to make sure that both DNS and Wireless become normal before i can connect to the MSN,as well as websites. Usually,if i dont do the troubleshooting in MSN, i dont know how long i will have to wait before i can access to websites.
    What should i do ??

    1, 6 & 11 are the channels that the wireless router are using to transmit signals. try to check which of those three works best for your computers. and if that wont work, lower the beacon to 75, frag to 2306 & rts 2307 for starters. and if still that wont work, i recomend a firmware upgrade. ^__^

  • Cannot bring up saved page, complete or HTML only, if disconnected from internet: "Server not found"

    I right clicked, chose "Save Page As...", chose both HTML Only and Complete on 2 different tries. When I tried to bring the page back up when disconnected from the internet network, I receive the "Server Not Found" error page. I shouldn't have to be connected to bring a saved page back up. I've not had this happen before, and it has only happened w/ a particular page, but one which is perfectly normal. What might be the explanation and solution? Thank you.
    Jeff Bowrs

    I would start with seeing if the Web Browser on the G4 can get to 192.168.0.1 which should be the web server (Set Up pages) on the router.
    If that does not work I would double check the cable (Use another).
    If you can I would connect two computers together and see if the Self Assigned IP (169.xxx.xxx.xxx) works to eliminate the Ethernet Card.
    You have no connection to the Internet.
    You need to sort out where it is breaking down.
    As other devices seem to get on the 'Net then it would appear to be:-
    The Ethernet Port on the routing device.
    The Cable itself.
    The Card or Port on the Mac
    10:56 PM Wednesday; August 25, 2010

  • Wireless Router WRT54G version 7. Connected computer gets disconnected from internet

    I have recently installed a Wireless Router WRT54G version 7 for my home office purpose.
    My home PC and my laptop are connected to it. Especially on my laptop, I have observed frequently getting disconnected from the internet. I need to power OFF the router and power it ON to get the internet connection restored
    Need help to get this problem resolved
    Thanks
    Rohit

    Access set up pageof router .... look for MTU ....change the size from 1500 to 1300 ....click save settings ....
    Click on wireless tab ....change the channel to 11 .....click save settings ....
    Go to advance wireless settings subtab ....
    Beacon interval 75
    RTS & Fragmentation threshold 2306...... click save settings ...
    Click on status check Ip address & firmware version on the same & let me know ...

  • My i pad is new at xmas it keeps disconnecting from internet my lap top is fine and ive tried resetting wi fi on i pad. can u help.

    my i pad was brand new at xmas but keeps disconnecting from the internet. my lap top is fine and i have tried resetting the i pad. can u suggest anything else

    Hi and thanks for your help, it was only my ipad that kept disconnecting from the internet but i think this happens when there are a lot of users on the same channel. it has been ok today so far, so, thanks again.

  • Safari 4.0.3 constantly "disconnecting" from internet

    Hi there,
    I have a new iMac 24" and I am having a problem that Safari on a regular basis tells me that I am not connected to the internet. I run the Network Utility and it says I am connected and can ping outside addresses. I have PCs on the same network and they are able to connect to the internet without any problems.
    Is this a know problem?
    Thanks
    Tony

    HI Tony,
    Have you tried resetting the cable modem? If that's what you are uisng... disconnect from the power source for about 20 seconds, then reconnect. Somestimes recylcing a modem can help.
    You are using a network so try a different Airport channel.
    Open AirPort Utility, located in the Utilities folder in the Applications folder on a computer using Mac OS X.
    Select the device you’re setting up, and then click Manual Setup. Enter the base station password if necessary.
    Click AirPort in the toolbar, and then click Wireless.
    Choose a new channel from the Channel pop-up menu.
    Open System Preferences/Network and click Advanced. Select the Proxies tab. Make sure none of the protcols for a proxy are selected.
    Try Open DNS
    No, not a known problem.
    Carolyn

  • Disconnects from internet when it goes to sleep

    I have Mountain Lion on an iMac I purchased in 2010.  Once I installed Mountain Lion, it started disconnecting from the internet when it goes to sleep.  Does anybody know how to repair?

    Oh yeah I forgot to say I use an ETHERNET connection.

  • Macbook Pro freezes when disconnected from Internet

    I'm so frustrated, I was doing important work and now I'm about to pull my hair out, I need to finish what I was doing but I can't even turn on my computer without it freezing, I literally can't even move the mouse because it freezes right on loading screen every time I restart, here's the story.
    I disconnected the Internet for just a few seconds, then the computer froze. So naturally I restarted the computer, but each time I restart, it just freezes, I can't move the mouse, I can't click on anything, it's just frozen. Let me know how frustrating that is that you don't have computer access after working on important files.
    I have a 2008 non unibody Macbook pro with OS X mavericks, I knew the computer froze when I turned off wifi, but I correlated that with the app that I was running, since I wasn't running the app this time, I thought I could turn off wifi no problem.
    But like I said, now I can't even restart or use it at all. I can't even use safe mode because it freezes there too. I can do the cmd+shift+ctrl+r thing and I can connect to the Internet that way, but there's nothing I can do from there. Once I restart, the Internet connection is still disconnected in the main operating system.

    Okay I solved the problem. For anyone who runs across this issue in the future, here is the solution:
    Step 1) Turn on the computer and hold CMD + Option + S, this will boot the computer into single user mode
    Step 2) Type in "Mount -uw /"
    Step 3) Type in "vi /Library/Preferences/SystemConfiguration/preferences.plist"
    Step 4) Scroll down until you find this part:
    <key>Interface</key>
    <dict>
            <key>en1</key>
            <dict>
                    <key>AirPort</key>
                    <dict>
                            <key>JoinModeFallback</key>
                            <array>
                                    <string>DoNothing</string>
                            </array>
                           <key>PowerEnabled</key>
                            <false/>
                            <key>RememberJoinedNetworks</key>
                            <true/>
                            <key>RequireAdminIBSS</key>
                            <false/>
                            <key>RequireAdminNetworkChange</key>
                            <false/>
                            <key>RequireAdminPowerToggle</key>
                            <false/>
                    </dict>
            </dict>
    </dict>
    Step 5: Edit the part where it says:
    <key>PowerEnabled</key>
    <false/>
    and change it to <true/>
    Step 6: Hit Ctrl + X, hit Y for Yes, press enter.
    Step 7: RESTART AND YOU HAVE YOUR COMPUTER BACK!!
    I panicked by the way because as someone said earlier, it's nearly impossible to fix:
    You cannot fix this problem with Safe Boot, Repair Permissions, Repair Disk, re-install Mavericks, restore from Time Machine backup, reset the SMC, reset PRAM, or boot into single-user mode.  Thus far, the only solution is to boot from a (homemade) Install OS X Mavericks USB, erase the hard drive, perform a clean Mavericks install, re-install your applications, and manually restore your data.
    Anyway I'm thankful for Ira Wolf 81 for figuring out, he deserves all the credit for this, I merely repeated his steps and found out he was right. Cheers.

  • Please help! iMac randomly disconnects from internet. Wi-fi via BT hub. I am baffled by all of the suggestions when I google this problem! Any simple solution? Thanks!

    Please Help! My brand new imac randomly disconnects from the internet. We have a BT hub - wi-fi. I have googled this issue and see that it is relatively common and it is incredibly frustrating. sadly, I have been unable to wade through the suggestions others have had as to how to solve the problem as i have no technical knowledge and am basically baffled by the list of suggestions. Please can anyone explain why this happens and what to do? It is fairly simple to reconnect each time but it is driving me mad having to. It generally happens when the computer is asleep but sometimes in the middle of doing something. Thanks!!!!!!

    What frequency, security are you running? It would have been helpful if you specified in the first post.
    Did you create a new Location in System Preferences->Network pane, Location pull-down. Create a new custom named Location. Then after you create that new Location click on the 'Apply' button to save that new custom named Location. See if that helps.
    Lastly a lot of people have reported that WEP in lion is problmatic and it would be better to use WPA2 if you can.

  • How to disconnect from internet for a specified time?

    Hi, I just read about an application that allows you to set times when your computer is disconnected from the internet. Unfortunately, the name of the application was not mentioned, nor whether it runs on a Mac or not. Does anyone know of such an application? It could come in handy in increasing one's kids' (and one's own) productivity.
    Thank you.
    M. Chaouli

    Thank you for the helpful response. What I really want is a program that lets me sever all connections to the internet (e-mail, web, i-chat, etc.) for specified periods of time. Perhaps parental controls allows this. I'll have to look into it.
    Thanks again,
    mc

  • How do I disconnect from internet?

    I have internet on my Iphone through my carrier but I'm about to go over the allowed usage and I don't want to have access to internet anymore, until the new monthly plan starts. My kids take the phone and go on Youtube when I have no idea, so I'm sure to go over if I don't disconnect the internet. How do I do this? Last months Vodafone send me a bill for $580 for exceeding the usage (and I had no idea). They said they charged something like $1 per MB once you go over the included usage. Of course I didn't pay it, but I don't want to risk it again.

    Go into Settings, General, Cellular, and turn cellular data off. You might also want to consider putting a passcode on your device to prevent them from accessing the device. Your call.

Maybe you are looking for

  • (Probably) A stupid playback question:

    I've recently (after purchasing a new PC) cleaned up my external HDs, and put my music collection onto iTunes, for use as a "media" player. I've had iTunes for many years, so, excuse me if this sounds remedial (I just cant figure it out): Why can't I

  • How to edit image mask in Gallery widget

    When I place an image into the Gallery widget the image receives a mask. I am trying to edit this mask, but it doens't do any thing. I only can move the image inside of the mask, I can't edit the size of the mask. Does anyone know how this is be done

  • Selecting data from table

    Hi just have a Labview programming question that I'm not too sure how to implement. Right now I have a VI that takes in an Excel file and dumps the values onto a 2D table. I'm extracting individual columns of values from the table by using "delete fr

  • How to do following restore? Full backup takes long and transaction backup in the middle.Thanks!

    One database starts to run full backup at 10am. Full backup finishes at 11:45 AM transaction log backups every 30 minutes: 10:00am, 10:30am,11:00 am , 11:30 am and 12:00 PM At 1:30 PM I need to restore database back to 12:00PM. So I should restore: 1

  • Does Ipod Nano 4th Gen charge in the  iHome iP9?

    I know it says all ipod nanos first off, but I have seen many reports where older or even some newer accessories will not charge the new ipod nano 4th gen. If someone could please confirm or deny it does charge it. Thanks for your time. Message was e