ASHA 210 SIGNAL DROP problem

I purchased a nokia asha 210 but am experiencing signal drop problems. I lose signal bars very very frequent;y. I would be glad if some one can direct me in resolving this issue.
Shivam

To rule out the phone,how old is your sim card,if its older than one year i suggest you change it.If you try your sim in another phone and the same issue occurs its your sim card.
If  i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

Similar Messages

  • Signal drop problem in Asha311 network mode is kep...

    Hi All,
    I just purchased new Asha 311. i just noticed one strange thing. If phone network mode is kept on "Dual mode" 
    I am facing signal drop problem after every incoming or outgoing call ( same the case with SMS ).  when we keep network mode in "GSM" mode  there is no problem at all. 
    is anybody facing that problem. 
    guys please suggest what should i do ? . is it a problem in cell phone.
    Regards,
    amit kushwaha
    Solved!
    Go to Solution.

    When you select the dual mode the device will try to find the 3G connection. If the strength of 3G is adequate it will connect and when the strength falls it switches to GSM. Now if you are in an area where 3G is available but the signal strength is not that good, it will constantly switch between 3G & GSM. That leads to problem. Keeping phone in GSM mode forces it to stay that way & ensures constant connection. If you have 3G activated, then you can force the device to stay on 3G by selecting that mode. Please note that the coverage area of GSM in some places is more than 3G so you may get no signal on 3G but it may be present in GSM mode.
    Please mark the post as solution if it solves your problem.
    Current Device - Nokia Lumia 1020/920

  • Notification problem on Asha 210

    I bought my Asha 210 august ending and its working well untill three weeks ago that it stopped showing notifications when i have messages on facebook,whatsapp. I restored the factory settings,still its not working,and the notification settings is on.Pls any help on how to solve this problem

    Hi mofizzy,
    Welcome to the Nokia Support Discussions! 
    Are you using Asha 210 as well? Does it happen when using both Wi-Fi and cellular data connection? Have you already tried rebooting your phone to see if there's any difference? 
    You may also try the following steps to check if it helps:
    1. Try to reset the phone's settings. This will not affect your files saved on the phone. To do this, go to Settings > Restore factory sett. > Settings only > enter the security code. The default code is 12345 unless changed.
    2.  Try to check if there's an available update for your phone. See this link for more info: Software update instruction.

  • Signals drop on iPhone 5s iOS 8.1 both wifi and network

    I am having the following problems since i updated to iOS 8.1 on my iPhone 5s 16GB model A1533 :
    1- My network signals drop to 3 dots and sometimes to 2 and stay there.
    2- Sometimes my wifi disconnects itself on my iphone for almost 4 or 5 seconds
    3- My battery is draining faster that ever. I turned off the use of fingerprint and found it useful but still my iphone consumes a lot of battery. I get my battery percentage dropped to 80% from 100% in just 20minutes of whatsapp usage. My fone's vibration is never on. Location services all off except find my iphone. Background app refresh also off. I tried everything. Erase all settings, hard reset etc. NO USE
    4- Playing games is really difficult. Battery drains very fast.
    I did not have these problems on 7.1.2. Need help
    Regards,
    Ahmad

    I understand that but I hope that people from Apple will be referring to the support groups and may actually think about that last paragraph.

  • Why does my signal drop every time I try to use an application.

    I've got a UFO style 802.11g, which I unfortunately kept up to date with the updates.
    For well over a year now I've had my gear set up like this, airport in the den, my wife's older Imac in the den with it, the printer in the den as well and my Imac across the house. Now, everything in the den connects like cake. Always up, always a great signal.
    My Imac across the house has always had it's ups and downs, we've got a stone fireplace and out kitchen in between. Basically, it's 3 rooms away. A whole bunch of walls and corners for the signal to bounce off of. So, I know, not an ideal set up. But it's worked ok for a good long time.
    So, a few months ago I performed the recommended update. It said that it would increase connection quality. So I thought, hey, this might help me out! At first glance my connection seemed great! I never lost a bar, not while I was looking anyway. Then I started noticing that occasionally I switch a webpage or some such and it would tell me that I wasn't connected to the internet. What? I look up and I've got all the bars, so I try again and get through... then I notice the bars just flat out go dead. Now I can't connect again. Odd.
    Ok, so I start paying attention and it just drops out at random... now, the signal used to fluctuate up and down fairly regularly before the update. I'd researched the problem and found out all the things that can interrupt my signal, and basically I've got em all in between my Airport and my Imac. I could live with that, because it would slow down, but it stayed connected for the most part. This was something new.
    Ok, back to the problem at hand. Now I see the signal is either all bars or none. No 2 bars, no 3 bars. Here or gone. And while I'm paying attention, I notice that practically every time I click on something, from my mail app to a preview image the signal drops to nothing. Seemed a coincidence at first, but know I'm certain that it isn't.
    So, random complete signal loss and complete signal loss when I use and app. Really not pleased.
    Ok, so I figured maybe there's a fix on the way, but I've heard nothing of it. I installed the most recent update, absolutely no effect. Oh, and this one too was supposed to provide better connectivity. Where? I'm not seeing it! Everything in the den works just as well as it ever has. That's one of the things I've loved about Mac for more than 10 years. Easy to use and reliable. But this, this is just a big old pain.
    I've tried to extend the network unsuccessfully with the Express. I've got another option to try with that, so my fingers are crossed. But I just don't get why my network is now worse than when I set it up when the only change that's been made have been the updates that I installed at Apple's insistence that my signal would actually be better.
    Sorry for being so long winded, and for anyone who made it this far... is there anything that I can do? I really do prefer to have my office in the room that it's in, but it doesn't help me at all when I have to move my Imac to use it online.

    This may sound stupid, but I'm gonna throw it out there anyway. Is it possible, that if I have enough junk on my desktop it might disrupt the signal? It seems odd, but it kind of looks like my signal is strong and relatively steady now that I've cleaned my desktop. I do tend to get very cluttered. I use a lot of reference images and save text clippings to use later... it just piles up very quickly.
    So, I wonder if all that extra effort my system has to do keeping up with the junk might have something to do with the drop outs?

  • Why does my signal drops and takes a long time to search and connect when I turn on or off my cellular data? And normal text messages are not getting delivered properly. It shows sent but later it will show try again, Is it just me?

    I do not know what the problem is, but after the latest update it is really hard to send text messages. It is taking alot of time to send the messages, it is not the problem with the carrier because sending text messages with the same number in the same area is really easy on my normal nokia 1100. Please suggest me what I should check. Second problem I am facing is the carrier signal drops to nothing when I turn on the cellular data. It has to then search for the network and connect again the same happens when I turn the data off again. Please tell a solution. I do not think it is the problem with the hardware because the phone is hardly 2weeks old and everything was working properly with ios 6. It initaly had problem with the battery on updating to ios7 but that was rectified with the new update but again these are the new issues am facing.

    This may sound stupid, but I'm gonna throw it out there anyway. Is it possible, that if I have enough junk on my desktop it might disrupt the signal? It seems odd, but it kind of looks like my signal is strong and relatively steady now that I've cleaned my desktop. I do tend to get very cluttered. I use a lot of reference images and save text clippings to use later... it just piles up very quickly.
    So, I wonder if all that extra effort my system has to do keeping up with the junk might have something to do with the drop outs?

  • Late 2012 mac mini display signal drops while booting and monitor goes to sleep

    I have a new Late 2012 Mac Mini.  I have had it for a week, what just started happening is that during restart, the video signal drops and my monitor goes to sleep.  I then have to toggle through the input options on the monitor and the video signal is detected again and the monitor wakes up.
    Here is what I see - If i shut down and then power back up, I get the grey screen, then the apple logo, then the little status circle spins for a few cycles then stops and then the screen goes black and the monitor says signal lost and then 5 seconds later goes to sleep.
    It is possible it is my monitor but, I haven't had any issues with it and i only drops the signal like that during a reboot.

    Welcome to the family. Search this forum for the main thread for this problem titled: "mac mini 2012 video blinking out".

  • Phone signal drops and says 'searching...' no idea what to do

    Half way through calls or after calls the phone signal drops and i can't get it back unless i switch on and off numerous times. THis has been gong on to a greater or lesser degree since I got the phone a year ago but has got much worse recently.
    i have tried resetting all settings, as per the o2 advice. They have told me to go to the apple store but I am not hopeful that they will help and as it is a long way I don't want a wasted journey. I have swapped sims/ phones with my partner who has a 3g iphone and he doesnt have the same problem so it is not related to where i am geographically or my sim. any ideas?

    I have the same problem after I have update my iPhone 3G to iOS 4.1.
    Immediately after the update my simcard was demagnetized (it was unusable). So I had to buy a new sim card but after a couple of day more times a day the sigal drops down and I have to switch off/on.
    My iphone has never had any problems untill the update.
    My operator is Vodafone Italia.

  • Keynote video signal drops out

    Keynote 4 video signal drops out during presentations where we are switching between two different Apple Computers (one G4 and one Intel). Both machines had previous versions of Keynote on them and over a period of time never had a signal drop out condition. Sounds like new version problem.
    Any input appreciated.

    I have two laptops each with their video out adapter connected and then cabled to a switch box where the big monitors project the signal of the laptop that the swtich box is set to. Like channel selection. Previous versions of Keynote were never a problem and I mean never. The signal came right through but now with Keynote 4 the signal drops out even tho the laptop is still active and apparently sending a signal through its video out connection. I have to hit escape and get out of keynote and then go back to PLAY for keynote to once again send that signal.

  • 5.0.1 constant signal drop after every 2 minutes

    As soon as I updated the software in 4s to 5.0.1 the neverending trouble started. There are constant signal drop resulting communication lost and despite the signal bar showing full strength. can any one help, Have already triesd the SIM PIN option can any one help? would really appreciate it

    mAN?
    with that type of config. you have? you should not have any problems.
    especially with the intervideo program 'cause it captures in mpg and it is a very loose coding (better said no coding at all)
    try turning the ht off through bios
    or try this prog.
    http://www.auzol.narod.ru/download_e.html
    also did you have xp sp2 allways?
    maybe sp2 is causing problems
    also
    did you try recording on both (4) of your hdd's?

  • Bell TV receptor signal drop every 4 min caused by TimeCapsule

    I just got my Fibe 50 installed here in Quebec, Canada, and every 4 minutes there is a signal drop. I had 2 technicians coming home and finally we discovered that there is a DHCP conflit between both of them. When I turn off the TimeCapsule and uses only bell router, the problem disappears. Does anybody had the same problem or know if there is any configuration to solve the problem? In the TimeCapsule settings I have already changed to allow 5Hz bandwidth but did not work. Thanks a lot.

    If you are supplied a router then the TC has to be in bridge mode.. that is router bridge..
    Open the airport utility and make sure in the dhcp and NAT section you have it set to bridge.
    Then you can set fixed channels to the wireless that are different to the bell router.. or turn off wireless altogether.. you can still access the TC via the bell router.

  • Asha 210 downloads but doesn't run apps

    Hello,
    I have just bought a nokia asha 210 phone. I connect to the Nokia Store, find and download an application for this phone. But at the end, it just shows me a filename (with .jar extension) and says "unknown state" and I can't locate the appliacation and can't run it. What could be the problem? 
    Please help.
    Thanks in advance

    Hi, sayat. To verify, does it only happen to a particular application? If yes, please provide the name of the app. In case that all apps are getting the same error message while installing them on your phone, this link might be useful: http://www.microsoft.com/en-us/mobile/support/faq/​?action=singleTopic&topic=FA116029. The link provided is intented for the US, but try accessing it on your local page.
    Grant us to know the progress it made on your phone. 

  • Airplay video signal drops

    We have 7 Apple TV's throughout our company and all of them exhibit the same behaviour, on many different laptops.
    All laptops are running minimum of OS 10.9.2.
    We have a Cisco Clean Air WiFi network with excellent signal coverage in all areas surrounding each of the AirPlay devices.
    Here's exactly what happens:
    User will enter conference room with Apple TV connected to an LED Flat Panel TV.  Power it up, then select the appropriate Airplay device from their Airplay menu and begin streaming mirroring their desktop to the television set.  Within 2 minutes, the signal drops, forcing the user to re-select the airplay device once again.  Usually it will drop again within 2 minutes.
    If the user reboots the Apple TV, the issue will go away for the rest of the session.  Perhaps something about the Apple TV's keeping a sustained connection to our WiFi network. 
    We've been working with Cisco to pour over our WiFi network but they cannot find anything from the WiFi gear that is contributing to the signal loss.
    Anyone have any ideas here?  I'd like to try an Apple TV alternative to see if a different device would have the same issue but the options seem extremely limited.
    Thank you.

    I have two laptops each with their video out adapter connected and then cabled to a switch box where the big monitors project the signal of the laptop that the swtich box is set to. Like channel selection. Previous versions of Keynote were never a problem and I mean never. The signal came right through but now with Keynote 4 the signal drops out even tho the laptop is still active and apparently sending a signal through its video out connection. I have to hit escape and get out of keynote and then go back to PLAY for keynote to once again send that signal.

  • Linksys WRT330N with Intel Wifi 5100 AGN causing signal drops.

    I have been using my Linksys WRT330N for quite a while, and it has been wonderful.  I have 3 pcs, 2 wired and 1 wireless.  The wireless laptop died and was replaced.  The replacement is causing problems and I need assistance finding a solution.  The new laptop is a Dell Inspiron 1545 and it has an Intel Wifi Wireless AGN internal wireless adapter.  My two wired pc's can surf the net without the slightest hicup until the wireless laptop with its wireless N card gets into the action.  Once the laptop gets on, the hicups are frequent. 
    Here is part of the router log:[code][INFO] Sat May 23 11:34:14 2009 Log viewed by IP address 192.168.1.107
    [INFO] Sat May 23 11:34:12 2009 Blocked incoming TCP packet from 209.40.98.47:80 to 24.144.31.163:1073 as RST:ACK received but there is no active connection
    [INFO] Sat May 23 11:34:09 2009 Time synchronized
    [INFO] Sat May 23 11:34:09 2009 Requesting time from 63.240.161.99
    [INFO] Sat May 23 11:33:59 2009 Blocked outgoing TCP packet from 192.168.1.107:1128 to 66.235.133.2:80 as PSH:ACK received but there is no active connection
    [INFO] Sat May 23 11:33:59 2009 Blocked outgoing TCP packet from 192.168.1.107:1128 to 66.235.133.2:80 as ACK received but there is no active connection
    [INFO] Sat May 23 11:33:58 2009 Blocked outgoing TCP packet from 192.168.1.107:1121 to 74.125.95.157:80 as PSH:ACK received but there is no active connection
    [INFO] Sat May 23 11:33:57 2009 Blocked outgoing TCP packet from 192.168.1.107:1116 to 64.156.132.140:80 as PSH:ACK received but there is no active connection
    [INFO] Sat May 23 11:33:57 2009 Blocked outgoing TCP packet from 192.168.1.107:1115 to 64.156.132.140:80 as PSH:ACK received but there is no active connection
    [INFO] Sat May 23 11:33:57 2009 Blocked outgoing TCP packet from 192.168.1.107:1114 to 64.156.132.140:80 as PSH:ACK received but there is no active connection
    [INFO] Sat May 23 11:33:57 2009 Blocked outgoing TCP packet from 192.168.1.107:1112 to 64.156.132.140:80 as PSH:ACK received but there is no active connection
    [INFO] Sat May 23 11:33:57 2009 Blocked outgoing TCP packet from 192.168.1.107:1113 to 64.156.132.140:80 as PSH:ACK received but there is no active connection
    [INFO] Sat May 23 11:33:57 2009 Blocked outgoing TCP packet from 192.168.1.107:1111 to 64.156.132.140:80 as PSH:ACK received but there is no active connection
    [INFO] Sat May 23 11:33:57 2009 Blocked outgoing TCP packet from 192.168.1.107:1110 to 64.156.132.140:80 as PSH:ACK received but there is no active connection
    [INFO] Sat May 23 11:33:57 2009 Blocked outgoing TCP packet from 192.168.1.107:1109 to 64.156.132.140:80 as PSH:ACK received but there is no active connection
    [INFO] Sat May 23 11:33:53 2009 Blocked outgoing TCP packet from 192.168.1.107:1117 to 64.156.132.140:80 as PSH:ACK received but there is no active connection
    [INFO] Sat May 23 11:33:53 2009 Previous message repeated 1 time
    [INFO] Sat May 23 11:33:53 2009 Blocked outgoing TCP packet from 192.168.1.107:1102 to 64.156.132.140:80 as PSH:ACK received but there is no active connection
    [INFO] Sat May 23 11:33:53 2009 Previous message repeated 1 time
    [INFO] Sat May 23 11:33:53 2009 Blocked outgoing TCP packet from 192.168.1.107:1097 to 64.156.132.140:80 as PSH:ACK received but there is no active connection
    [INFO] Sat May 23 11:33:53 2009 Previous message repeated 1 time
    [INFO] Sat May 23 11:33:53 2009 Blocked outgoing TCP packet from 192.168.1.107:1118 to 64.156.132.140:80 as PSH:ACK received but there is no active connection
    [INFO] Sat May 23 11:33:49 2009 Starting WAN Services
    [INFO] Sat May 23 11:33:49 2009 Rate estimation completed. Upstream speed is 779 kbps
    [INFO] Sat May 23 11:33:22 2009 Estimating speed of WAN interface
    [INFO] Sat May 23 11:33:22 2009 Dropped packet from 192.168.1.100 to 255.255.255.255 (IP protocol 0) as unable to create new session
    [INFO] Sat May 23 11:33:22 2009 WAN interface is up. Connection to Internet established with IP Address 24.144.31.163 and default gateway 24.144.31.1
    [INFO] Sat May 23 11:33:22 2009 Obtained IP Address using DHCP. IP address is 24.144.31.163
    [INFO] Sat May 23 11:33:21 2009 Bringing up WAN using DHCP
    [INFO] Sat May 23 11:33:21 2009 WAN interface cable has been connected
    [INFO] Sat May 23 11:33:20 2009 Stopping WAN Services
    [INFO] Sat May 23 11:33:20 2009 WAN interface is down
    [INFO] Sat May 23 11:33:20 2009 WAN interface cable has been disconnected
    [INFO] Sat May 23 11:32:26 2009 Blocked incoming TCP packet from 61.147.113.197:53 to 24.144.31.163:15958 as SYN:ACK received but there is no active connection
    [INFO] Sat May 23 11:32:22 2009 UPnP added entry 255.255.255.255 <-> 24.144.31.163:26413 <-> 192.168.1.107:26413 TCP timeout:-1 'Skype TCP at 192.168.1.107:26413 (873)'
    [INFO] Sat May 23 11:32:21 2009 UPnP added entry 255.255.255.255 <-> 24.144.31.163:26413 <-> 192.168.1.107:26413 UDP timeout:-1 'Skype UDP at 192.168.1.107:26413 (873)'
    [INFO] Sat May 23 11:32:12 2009 Blocked incoming UDP packet from 24.144.50.219:4834 to 24.144.31.163:137
    [INFO] Sat May 23 11:31:59 2009 Lease 192.168.1.107 renewed by client 0022FB4C87C4
    [INFO] Sat May 23 11:31:54 2009 Blocked incoming UDP packet from 24.144.50.219:4376 to 24.144.31.163:137
    [INFO] Sat May 23 11:31:54 2009 Wireless system with MAC address 0022FB4C87C4 associated
    [INFO] Sat May 23 11:31:03 2009 Blocked incoming UDP packet from 24.144.50.219:3284 to 24.144.31.163:137
    [INFO] Sat May 23 11:31:00 2009 Blocked outgoing TCP packet from 192.168.1.101:2005 to 128.242.186.202:80 as RST:ACK received but there is no active connection
    [INFO] Sat May 23 11:30:51 2009 Blocked outgoing TCP packet from 192.168.1.107:4166 to 204.2.216.33:80 as RST:ACK received but there is no active connection
    [INFO] Sat May 23 11:30:33 2009 Time synchronized
    [INFO] Sat May 23 11:30:33 2009 Requesting time from 207.46.232.182
    [INFO] Sat May 23 11:30:31 2009 Blocked incoming TCP packet from 206.57.28.32:80 to 24.144.31.163:4094 as FIN:ACK received but there is no active connection
    [INFO] Sat May 23 11:30:31 2009 Blocked incoming TCP packet from 206.57.28.32:80 to 24.144.31.163:4095 as FIN:ACK received but there is no active connection
    [INFO] Sat May 23 11:30:31 2009 Blocked incoming TCP packet from 206.57.28.72:80 to 24.144.31.163:4093 as FIN:ACK received but there is no active connection
    [INFO] Sat May 23 11:30:30 2009 Blocked incoming TCP packet from 206.57.28.32:80 to 24.144.31.163:4094 as FIN:ACK received but there is no active connection
    [INFO] Sat May 23 11:30:30 2009 Blocked incoming TCP packet from 206.57.28.32:80 to 24.144.31.163:4095 as FIN:ACK received but there is no active connection
    [INFO] Sat May 23 11:30:30 2009 Blocked incoming TCP packet from 206.57.28.72:80 to 24.144.31.163:4093 as FIN:ACK received but there is no active connection
    [INFO] Sat May 23 11:30:29 2009 Blocked incoming TCP packet from 206.57.28.32:80 to 24.144.31.163:4094 as FIN:ACK received but there is no active connection
    [INFO] Sat May 23 11:30:29 2009 Blocked incoming TCP packet from 206.57.28.32:80 to 24.144.31.163:4095 as FIN:ACK received but there is no active connection
    [INFO] Sat May 23 11:30:29 2009 Blocked incoming TCP packet from 206.57.28.72:80 to 24.144.31.163:4093 as FIN:ACK received but there is no active connection
    [INFO] Sat May 23 11:30:18 2009 Blocked incoming TCP connection request from 24.144.48.61:19105 to 24.144.31.163:135
    [INFO] Sat May 23 11:30:13 2009 Starting WAN Services
    [INFO] Sat May 23 11:30:13 2009 Rate estimation completed. Upstream speed is 772 kbps
    [INFO] Sat May 23 11:29:48 2009 Estimating speed of WAN interface
    [INFO] Sat May 23 11:29:48 2009 Dropped packet from 192.168.1.100 to 255.255.255.255 (IP protocol 0) as unable to create new session
    [INFO] Sat May 23 11:29:48 2009 WAN interface is up. Connection to Internet established with IP Address 24.144.31.163 and default gateway 24.144.31.1
    [INFO] Sat May 23 11:29:48 2009 Obtained IP Address using DHCP. IP address is 24.144.31.163
    [INFO] Sat May 23 11:29:46 2009 Bringing up WAN using DHCP
    [INFO] Sat May 23 11:29:46 2009 WAN interface cable has been connected
    [INFO] Sat May 23 11:29:45 2009 Stopping WAN Services
    [INFO] Sat May 23 11:29:45 2009 WAN interface is down
    [INFO] Sat May 23 11:29:45 2009 WAN interface cable has been disconnected
    [INFO] Sat May 23 11:29:45 2009 Log viewed by IP address 192.168.1.107
    [INFO] Sat May 23 11:29:44 2009 Time synchronized
    [INFO] Sun Jan 04 15:50:37 2009 Requesting time from 192.43.244.18
    [INFO] Sun Jan 04 15:50:17 2009 Starting WAN Services
    [INFO] Sun Jan 04 15:50:17 2009 Rate estimation aborted as measurements failed to converge
    [INFO] Sun Jan 04 15:50:08 2009 Estimating speed of WAN interface
    [INFO] Sun Jan 04 15:50:08 2009 Dropped packet from 192.168.1.100 to 255.255.255.255 (IP protocol 0) as unable to create new session
    [INFO] Sun Jan 04 15:50:08 2009 WAN interface is up. Connection to Internet established with IP Address 24.144.31.163 and default gateway 24.144.31.1
    [INFO] Sun Jan 04 15:50:08 2009 Obtained IP Address using DHCP. IP address is 24.144.31.163
    [INFO] Sun Jan 04 15:50:07 2009 Bringing up WAN using DHCP
    [INFO] Sun Jan 04 15:50:07 2009 WAN interface cable has been connected
    [INFO] Sun Jan 04 15:50:06 2009 Stopping WAN Services
    [INFO] Sun Jan 04 15:50:06 2009 WAN interface is down
    [INFO] Sun Jan 04 15:50:06 2009 WAN interface cable has been disconnected
    [INFO] Sun Jan 04 15:49:56 2009 Starting WAN Services
    [INFO] Sun Jan 04 15:49:56 2009 Rate estimation completed. Upstream speed is 778 kbps
    [INFO] Sun Jan 04 15:49:26 2009 Initialization complete, starting DHCP server
    [INFO] Sun Jan 04 15:49:24 2009 DHCP Server Parameter 19 was added to the parameter database
    [INFO] Sun Jan 04 15:49:24 2009 DHCP Server Parameter 3 was added to the parameter database
    [INFO] Sun Jan 04 15:49:24 2009 DHCP Server Parameter 1 was added to the parameter database
    [INFO] Sun Jan 04 15:49:23 2009 Estimating speed of WAN interface
    [INFO] Sun Jan 04 15:49:23 2009 Dropped packet from 192.168.1.100 to 255.255.255.255 (IP protocol 0) as unable to create new session
    [INFO] Sun Jan 04 15:49:23 2009 WAN interface is up. Connection to Internet established with IP Address 24.144.31.163 and default gateway 24.144.31.1
    [/code]
    As you can see the signal drops show as the router resetting.  It was not me unplugging it.  The router as the only firmware which is available, v1.00.4 and the network drivers for the laptop's wireless wifi 5100 card are up to date.  A Dell technitian controlled my laptop and did it himself.
    Any suggestions?

    and this is what happens when i try to watch a video on hulu.com
    [INFO] Sun May 24 15:15:22 2009 Log viewed by IP address 192.168.1.101
    [INFO] Sun May 24 15:15:20 2009 Blocked outgoing TCP packet from 192.168.1.107:1205 to 204.246.230.27:80 as PSH:ACK received but there is no active connection
    [INFO] Sun May 24 15:15:17 2009 Blocked outgoing TCP packet from 192.168.1.107:1204 to 209.130.205.38:80 as FIN:ACK received but there is no active connection
    [INFO] Sun May 24 15:15:16 2009 Blocked outgoing TCP packet from 192.168.1.107:1195 to 209.130.205.38:80 as PSH:ACK received but there is no active connection
    [INFO] Sun May 24 15:15:15 2009 Blocked outgoing TCP packet from 192.168.1.107:1196 to 209.130.205.59:80 as PSH:ACK received but there is no active connection
    [INFO] Sun May 24 15:15:14 2009 Blocked outgoing TCP packet from 192.168.1.107:1206 to 204.246.230.91:80 as RST:ACK received but there is no active connection
    [INFO] Sun May 24 15:15:14 2009 Blocked outgoing TCP packet from 192.168.1.107:1201 to 206.57.28.108:80 as RST:ACK received but there is no active connection
    [INFO] Sun May 24 15:15:14 2009 Blocked outgoing TCP packet from 192.168.1.107:1209 to 208.91.157.10:80 as RST:ACK received but there is no active connection
    [INFO] Sun May 24 15:15:14 2009 Blocked outgoing TCP packet from 192.168.1.107:1181 to 204.2.215.16:80 as RST:ACK received but there is no active connection
    [INFO] Sun May 24 15:15:14 2009 Blocked outgoing TCP packet from 192.168.1.107:1203 to 209.130.205.38:80 as ACK received but there is no active connection
    [INFO] Sun May 24 15:15:13 2009 Starting WAN Services
    [INFO] Sun May 24 15:15:13 2009 Rate estimation completed. Upstream speed is 780 kbps
    [INFO] Sun May 24 15:14:42 2009 Estimating speed of WAN interface
    [INFO] Sun May 24 15:14:42 2009 Dropped packet from 192.168.1.100 to 255.255.255.255 (IP protocol 0) as unable to create new session
    [INFO] Sun May 24 15:14:42 2009 WAN interface is up. Connection to Internet established with IP Address 24.144.31.163 and default gateway 24.144.31.1
    [INFO] Sun May 24 15:14:42 2009 Obtained IP Address using DHCP. IP address is 24.144.31.163
    [INFO] Sun May 24 15:14:41 2009 Bringing up WAN using DHCP
    [INFO] Sun May 24 15:14:41 2009 WAN interface cable has been connected
    [INFO] Sun May 24 15:14:40 2009 Stopping WAN Services
    [INFO] Sun May 24 15:14:40 2009 WAN interface is down
    [INFO] Sun May 24 15:14:40 2009 WAN interface cable has been disconnected
    [INFO] Sun May 24 15:14:35 2009 Blocked incoming TCP packet from 121.12.106.189:80 to 24.144.31.163:32358 as SYN:ACK received but there is no active connection
    [INFO] Sun May 24 15:14:34 2009 Blocked incoming TCP packet from 72.233.86.254:80 to 24.144.31.163:1168 as FIN:ACK received but there is no active connection
    [INFO] Sun May 24 15:14:26 2009 Blocked incoming TCP packet from 204.246.230.107:80 to 24.144.31.163:1879 as FIN:ACK received but there is no active connection
    [INFO] Sun May 24 15:14:25 2009 Previous message repeated 2 times
    [INFO] Sun May 24 15:14:25 2009 Blocked incoming TCP packet from 204.246.230.107:80 to 24.144.31.163:1817 as FIN:ACK received but there is no active connection
    [INFO] Sun May 24 15:14:24 2009 Blocked incoming TCP packet from 204.246.230.107:80 to 24.144.31.163:1846 as FIN:ACK received but there is no active connection
    [INFO] Sun May 24 15:14:24 2009 Blocked incoming TCP packet from 204.246.230.107:80 to 24.144.31.163:1851 as FIN:ACK received but there is no active connection
    [INFO] Sun May 24 15:14:24 2009 Blocked incoming TCP packet from 204.246.230.107:80 to 24.144.31.163:1817 as FIN:ACK received but there is no active connection
    [INFO] Sun May 24 15:14:23 2009 Blocked incoming TCP packet from 204.246.230.107:80 to 24.144.31.163:1846 as FIN:ACK received but there is no active connection
    [INFO] Sun May 24 15:14:23 2009 Blocked incoming TCP packet from 204.246.230.107:80 to 24.144.31.163:1817 as FIN:ACK received but there is no active connection
    [INFO] Sun May 24 15:14:23 2009 Blocked incoming TCP packet from 204.246.230.107:80 to 24.144.31.163:1851 as FIN:ACK received but there is no active connection
    [INFO] Sun May 24 15:14:23 2009 Blocked incoming TCP packet from 204.246.230.107:80 to 24.144.31.163:1846 as FIN:ACK received but there is no active connection

  • AirPort Express Base Station signal drops on and off

    My Airport Express Base Station signal drops on and off about every 2 minutes. It’s quite frustrating. I currently have a Windows XP PC, with a Linksys Wireless Router. I’ve taken several steps as prescribed in the support chats to no avail. I’ve switched channels, updated software/firmware (iTunes, Base Station and my Router), reconfigured my security settings to no security back to my regular security settings, I’ve placed the base station right next to my router in case it was due to interference, I’ve used headphones in the event it was my stereo, I’ve changed different utility settings (interference robustness, stream size, etc). I’ve opted to use the option “Create a Wireless Network” versus “Existing Wireless Network” and back to “Existing Wireless Network”. Again, all to no avail. Can someone offer some insight to help solve this problem? The problem is so annoying that I no longer use the base station.
    Thanks in advance,
    Rene
    AirPort Express Base Station   Windows XP  

    Maybe Windows is trying to get an 802.1x authentication which should be disabled:
    Ensure that the Enable IEEE 802.1x authentication for this network check box is not checked.
    http://www.efelix.co.uk/tech/1010.html
    It seems updating Windows XP to Service Pack 2 fixes that.

Maybe you are looking for

  • XP, Vista, where, what, how, how much--your help appreciated......

    New Mac Book Pro owner here. I will be starting a course of study in a month that requires Windows, to run its program. I left the Windows platform three years ago and have been very happy without it. However, now that it's a requirement, I have some

  • How to read .mdb file from shared folder

    Hi All, In one of my local computer I have a shared folder and within the folder I have a .mdb file. Now I am trying to read that file from MII. I have tried with Get_File_List action block. I am providing the following information to Get_File_List F

  • Copy and Paste from Word to ID – as text please?

    Recently upgraded to CS4 and Office 2008. Now when I copy and paste text from Word to ID it only comes in as an image. If I'm copying a single paragraph from a lengthy Word doc, I really don't want to have to paste it into a new Word doc, save that,

  • Adobe products buy online

    Please let me know if i buy photoshop or any other adobe product online from USA website of ADOBE. Can i use it in INDIA? Is it complinat by local Indian Law or i have to buy from INDIA only?

  • Netweaver 7.01 License Problem - Advanced

    Hi there, I have been running SAP Netweaver 7.01 for a few months now without any problems. I have renewed the license once or twice before. This time when I try to renew the license, it is giving me problems. Some details about my version of Netweav