Asha 302 wifi problem - "WLAN connection failed"

I have nokia asha 302 two days. I have problem with wifi connection. I see "my wifi" in wifi list, but when I click connect, I get message "WLAN connection failed". Version of mobile Asha is 14.78.
I have router Ovislink WN-200R. My wifi setinngs is in attachment (set 1).
I tried to change password, change security system, set to without security system, ... - without changing. At last I found bug and one solution. When I set wifi, how is in attachment (set 2), is to possible to connect with Asha 302.
But in my house I use PC with wifi N for speed. Do you know any other solution?
PS. I use Nokia 5530, Iphone 4GS, HTC desire S too. And I don`t have this problem.
Thanks a lot
Attachments:
Asha_302_wifi_problem.png ‏98 KB

DennIz wrote:
"Wrong Password"
There are several reasons why that could happen. One reason: Your network changed from WPA2-PSK back to WPA1-PSK. Some Wi-Fi access-points have silly mixed-mode settings. If your network is in mixed mode, first try the old version: WPA-only (WPA-PSK). Because some very old Wi-Fi access-points do not support WPA2 correctly even for multicast, as next step try the more secure version 2: WPA2-PSK. If that does not work:
Do you have a Mac OS X computer around?
If yes, please, go to Applications » Utilities » Terminal and enter
/System/Library/PrivateFrameworks/Apple80211.framework/Resources/airport -I -s
The last part (Security) should be ‘WPA2(PSK/AES/AES)’ and nothing else.
Do you have a Windows Vista, Windows 7, or Windows 8 computer around?
If yes, please, open a command prompt (as Administrator, keys: Windows-R), and enter
netsh wlan show networks mode=bssid
The network type has to be not Ad-hoc but Infrastructure.
The basic rates should be ‘1 2 5.5 6 11 12 24’ (IEEE 802.11g/n) and nothing else.
Do you have a Android device around?
If yes, install the free Wifi Analyzer. Within that tool, please, tap the wrench icon (Settings) » Show full securities. Then go back and have a look at your Wi-Fi.
It must be [WPA2-PSK-CCMP][ESS] and nothing else.
If the connection still fails, please go to the configuration interface of your Wi-Fi access point and change your access-point back to the old WPA-PSK (TKIP-only) and 802.11g (only). If not available, avoid 802.11n and go for 802.11b/g. Does it work now?
If it still does not work, change your settings back to WPA2-PSK (AES-CCMP) only and 802.11g/n. Then, post the results of the above tools. If you do not like to post them into the public, you can send me a private message. But those information are public to your neighbours anyway.

Similar Messages

Asha 302 wifi disconnect

Hello everyone, I have a problem with my Asha 302 wifi connection. Whenever I connect to my home wireless network, wifi stays connected for a few seconds and disconnects, when I trying to browse the internet, it connects again but after a few seconds disconnects, after 5 or so seconds it connects again and it continues in such a spiking manner. It might not be big of a problem, but I cannot download anything, every time wifi disconnects itself my download fails. Is there a reason for such kind of behavior?
Best Regards

Did it work once? Or has it never worked, yet? Which Wi-Fi access point do you use (manufacturer, model and if known, the firmware version)?

After Updating Mountain Lion, Mail & Safari keep crashing; WLAN Connection fails

After Updating Mountain Lion, Mail & Safari keep crashing; WLAN Connection fails;
I have updatet Mountain Lion and since then, Mail & Safari keep crashing plus: WLAN Connections keeps on failing from time to time.
My Router has the newest firmware, i am clueless what to do.
I even cannot shut down my mac properly.

Hello you all,
I also had the problem of a disconnecting wifi while my imac was sleeping. I did not have the reconnecting issue after sleep, but the lost connection issue during sleep which made it impossible to reach my imac for things like homesharing, apple tv or remote desktop. I have a late 2012 iMac with a clean ML 10.8.2 on it and wirelessly connected to an apple time capsule (same as an airport extreme). My partner has a mid 2007 iMac, also with an ML 10.8.2 on it.
I tried every single solution I could find on the internet, such as changing the router's security from wpa2 to wpa, changing the MTU from automatic to manual 1453, router reboots, re-installations, re-configurations, keychain clean-ups, everything.
Eventually I solved my problem with these steps and now it works as a charm. I can still find the iMac with the remote app, even after 12 hours of sleep:
My time capsule router is set on automatic MTU and encrypted with WPA2 and I use the 5Ghz network!
1. Cleaned all the wifi passwords in keychain on my iMac
2. Created a new network location in system preferences
3. In this location I deleted the bluetooth pan and bluetooth dun connection.
4. In this location I changed the preferred connection-order to wifi on #1 and ethernet on #2.
5. Restarted my iMac.
Now I still have a connection when it sleeps and I can wake it to low profile using the remote app (homesharing) and everything works fine.
Hope more people wille be helped by this.

Nokia C3 WLAN Connection Failed..

I recently bought a Nokia C3.I have a Wifi at home..(WEP)450TC1-ADSL Router .I use a Vodafone connection.Whenever i try to use WLAN on my cell it detects this Wifi and asks for password.On entering this password it tries to Connect but soon shows WLAN Connection Failed.My WiFi is functional and has no problems.Please help me sort this problem.Thank You.

Hi,
You are right, its working with additional changes.
In Menu - Settings - Configuration - Default config. settings.
You can try this, it may work.
If you go to Menu - Settings - Configuration - Personal Settings - My Web
And follow the steps, you do not need to fill in any details, just activate it.
Then go to Menu - Internet - Web Settings - Configuration Settings, then select configuration and change to Personal configuaration. Then the 'account' should say my web.
So for good, then check the
Menu - Settings - Configuration - Default config. settings. "Default config. settings", if that still in operator's config settings you have to change this in to "Personal Config."
then it will work properly

C3 wlan connection fail

greetings!! i've bought a brandnew nokia c3. ever since i tried connecting to our wifi at home, i always got a "wlan connection failed" message..i used to have a nokia 5800 and ecerything then worked fine with the wifi connection. what seems to be the problem???

Also had the same issue, just after entering the WiFi (WLAN) security code, I'd get the error message "WLAN connection failed". This was very frustrating, especially as it was a xmas present. The security code was fine as other devices would connect to the WLAN just fine with the same code.
Glad to say this is now fixed but it did involve a firmware upgrade of our Thomson TG585 v8 router, also see http://www.geekzone.co.nz/forums.asp?forumid=66&topicid=68585.
Good luck.

C 3-00 WLAN Connection Failed

i newly purchased a Nokia c 3-00 with the firmware version 4.65. My WLAN does not work. It detects WLAN connections available but when i try to connect the phone to the network it shows "Connection Failed". The WEP key is Right and i am near the Router and there is no problem with the router as other Nokia Phones connect with no problems. The Nokia Website is showing a firmware update of 7.20 but when i enter my phone product code it shows that the firmware 4.65 is the latest available for my phone. I have checked the C 3-00 phones of my friends on various routers and all those phones seem to have the same problem.
Please Help Me out...
If i need to update my phone to 7.20 how do i do it ? Nokia software updater shows my firmware is the latest.

my nokia moble C3-00 sometimes WLAN connection failed please clear the complaint

C3-00 Wlan Connection Failed (but not before)

Hi!
I bought a C3-00 today, at the begining, I could connect on my access point, but after charging my Nokia, I could'nt attach to the access point. This message appears now: "Wlan Connection Failed". I read some stuff about firmware update but I can't update my firmware because the 7th version is not available in my region (I'm belgian).
Someone have an idea of the problem?
Thanks.
Edit:
My router is a Bbox2 (Belgacom Box)
Edit2:
I've just try and it's work, it pretty weird. Do you thing problem comes from my router?

Hi babyhedgehog,
Thank you for your post and welcome to the forums!
The security code is tied to the phone, not your SIM card. So, we would advice you to soft reset your phone again and try the default security code, which is 12345.
If restoring factory settings does not resolve your issue, you can also try to hard reset your phone. This will remove all settings and personal data from your phone, so we recommend that you first back up your phone with Nokia Suite.
To hard reset your phone, just dial *#7370#.
Let us know if this helps,
Puigchild
If you find this post helpful, a click upon the white star at bottom would always be appreciated.
If it also solves your problem, clicking ACCEPT AS SOLUTION below it will benefit other users!

Since I upgraded to Moutain Lion I'm dealing with wifi problems : no connection or random connection

Since I upgraded to Moutain Lion I'm dealing with wifi problems : no connection or random connection. With OS X Lion wifi was OK.

So, Darrall, it seems to be fixed. Mind you, this has happened through a seemingly unrelated, but hopefully replicable sequence of events. You be the judge.
I went to my other login account, which as it happens is also an admin account. Voila, the secondary click worked fine. So I returned to my primary account, where I did the following:
First, I unpaired the trackpad. then I remembered I needed something to move the mouse with, so I re-paired the magic mouse I'd had before. I thought I'd turned off the trackpad, but apparently not, so the computer re-paired it automatically. None of this had any immediate effect, as you'd imagine.
Then I went to Mission Control in Preferences. There, I deselected "Show dashboard as a space", and in the hotcorners, I deselected Mission Control from the bottom left, where it had been. I didn't replace it.
Now, my secondary click works. Uh huh. I was suspicious that it might have more to do with Mission Control and/or Dashboard than the trackpad, only because I'd beaten that horse till my arm hurt and this was all I could think of.
Never did I imagine this would get fixed short of creating a new login account and somehow copying everything - since I didn't know what was wrong, I could easily have copied the error too - so I'm very pleased and relieved. If you haven't fixed yours yet, try this. Let me know what happens!

Nokia 701 WLAN connection failed

Hi,
I bought a Nokia 701 and its not connecting to any WLANs at all. It shows the available SSIDs but when I click on something, it says, Connection failed Connection unavailable
Please help.
Dinesh
Solved!
Go to Solution.

after i install the new software version 111.030.0609.C00.01, i cannot even connect to the internet or even connect to any WIFI signal, I was told by Nokia Care, its software its very unstable and i have to wait till the next update is available to solve this matter, is that correct, how long more do i have to wait.
Can Nokia give us two years warranty, due to frustration cause by Nokia software problems.
My WLAN also always gets Connection failed after i install the new update.
can anyone help me,
Reuben -
Moderators notes: Personal email removed.

Wifi-menu -o: CONNECTING FAILED

EDIT: It seems my problem is just this: I installed netctl and I have started it using systemd. When I write sudo wifi-menu -o, and try to connect to my wireless network using the correct password (I've tried many times), it just instantly tells me "CONNECTING FAILED" - without any apparent waiting for the router to respond, although I don't know.
Edit: I tried NetworkManager as well, and connecting via nmtui, it says "Could not activate connection: Activation failed"... Help.
(old)
I was using connman on my desktop until a recent system upgrade where it only said "Input/output error" when I tried to connect to wireless networks. I installed the packages netctl, ifplugd and wpa_actiond and read a bit about netctl on arch wiki. With `wifi-menu -o` I generated a profile in /etc/netctl for my wireless network. I called the profile "31". I have enabled and started netctl using systemctl. I also wrote `sudo netctl enable 31`. Now, when I write `sudo netctl start 31`, I get this error:
$ sudo netctl start 31
Job for [email protected] failed. See 'systemctl status [email protected]' and 'journalctl -xn' for details.
$ systemctl status netctl@31
● [email protected] - Automatically generated profile by wifi-menu
Loaded: loaded (/etc/systemd/system/[email protected]; enabled)
Active: failed (Result: exit-code) since on. 2014-08-20 14:04:10 CEST; 55s ago
Docs: man:netctl.profile(5)
Process: 5669 ExecStart=/usr/lib/network/network start %I (code=exited, status=1/FAILURE)
Main PID: 5669 (code=exited, status=1/FAILURE)
Here is the profile:
$ sudo cat /etc/netctl/31
Description='Automatically generated profile by wifi-menu'
Interface=wlp3s0
Connection=wireless
Security=wpa
ESSID=31.
IP=dhcp
Key=\"<a lot of characters that are irrelevant>
If you need more information, please tell. Thanks!
Edit: Shamefully.. I was a bit too fast to post. I read this just when I posted and it worked!
Edit 2: Rebooted and still the same problem. journalctl -xn says nothing about network errors.
Edit 3: Rebooted, and ran journalctl -xn as super user. It now gave relevant information:
# journalctl -xn
-- Logs begin at sø. 2014-05-25 20:44:50 CEST, end at on. 2014-08-20 19:11:08 CEST. --
aug. 20 19:10:57 3rlend network[27525]: Failed to bring the network up for profile '31'
aug. 20 19:10:57 3rlend systemd[1]: [email protected]: main process exited, code=exited, status=1/FAILURE
aug. 20 19:10:57 3rlend systemd[1]: Failed to start Automatically generated profile by wifi-menu.
-- Subject: Unit [email protected] has failed
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit [email protected] has failed.
-- The result is failed.
aug. 20 19:10:57 3rlend systemd[1]: Unit [email protected] entered failed state.
aug. 20 19:10:59 3rlend ntpd[1253]: bind(23) AF_INET6 fe80::720:3f17:85cc:2894%2%2#123 flags 0x11 failed: Cannot assign requested address
aug. 20 19:10:59 3rlend ntpd[1253]: unable to create socket on enp4s0 (21) for fe80::720:3f17:85cc:2894%2#123
aug. 20 19:10:59 3rlend ntpd[1253]: failed to init interface for address fe80::720:3f17:85cc:2894%2
aug. 20 19:11:08 3rlend pacserve[29800]: [Errno 19] No such device
aug. 20 19:11:08 3rlend systemd[1]: pacserve.service: main process exited, code=exited, status=71/n/a
aug. 20 19:11:08 3rlend systemd[1]: Unit pacserve.service entered failed state.
Edit 4: Tried to set up the profile again using wifi-menu; seems I have overlooked an important detail: wifi-menu tells me "CONNECTING FAILED" even though I'm sure I wrote the right password (several times). The router uses wpa2.
Last edited by Ploppz (2014-08-21 19:12:43)

Same problem here. Seriously, the team's arch have to see what the hell is wrong with the packages that are responsible for the wireless system.

Small problem of connection fails

Since I installed my extreme base station I quite often get a 'connection failed' to other computers on my network.
Even though it says connection failed I am still able to share the screen of the other computer. The only way to fix it is to re-enter my admin password for the computer I am trying to connect to.
Although this is not a major issue it is still a pain. I am telling it to save in keychain and prior to the extreme just using my router it was fine.
Is there any settings I can put anywhere to stop this behaviour?

Look for the button that says "Connect As" and enter your password. Click the check box to Remember.

Lenovo G505 Wifi Problems - Limited Connection, No Connection, and Dropped Connections

Some forum members have reported a variety of Wifi issues with their G505 laptops. Their reports range from showing "Connection is limited", to Wifi connections dropping repeatedly, to being unable to make a Wifi connection at all. I combined multiple threads in order to assist forum members with troubleshooting solutions.
If your G505 was upgraded to Windows 8.0 or 8.1 and then lost connectivity, or you recently purchased a G505 running Windows 8.0 or 8.1 and are unable to connect, try following the instructions posted by Vikramsbox to restore the connection through the Lenovo Communications Utility.
For non-Windows 8.0 or 8.1 users, start troubleshooting with the basics:
The most recent WLAN, BIOS, and Power Management drivers from Lenovo can be downloaded here: http://support.lenovo.com/us/en/products/laptops-and-netbooks/lenovo-g-series-laptops/lenovo-g505-no...
It is also good practice to verify your Wifi is activated by following the instructions from Neokenchi.
Check Power Management settings to ensure your laptop isn't turning off the Wifi as noted by Dannyk1.
Check to see that Airplane Mode is set to OFF by following the instructions provided by Shiv_K.
After trying those steps, if you still experience a Wifi issue with your G505, other troubleshooting steps have been noted in this thread. This includes a whitelist of accepted replacement WLAN cards posted by Topmahof and a 3rd party driver which resolved wifi issues for Miila and Jessemck125. Please note that while Lenovo does not support 3rd part drivers, it may be an option to consider if your laptop is out of warranty and none of the suggestions in the thread resolve the issue.
Thanks for your contributions,
Amy Tupper
Technical Resolution Lead, Pervasive Issues
Lenovo US
ThinkPad T431s, S3 Yoga 14, Helix, Edge 11 & 14, E431, IdeaTab A1107, IdeaPad A1-07, IdeaCentre Horizon, Yoga Tablet 2 10 1051
First computer was a 1980 Commodore 64 from Radio Shack/ GEnie SFRT member from 1993-1996

First is to update your Atheros/Broadcom driver for your G505 here:http://download.lenovo.com/consumer/mobiles/wlan117w8.exe
From what I understand, the situation is that you get limited connectivity while your other devices that are connected to the router gets uninterrupted internet access.
After updating your drivers, you can try to flush your DNS cache by copy and pasting this code to your notepad and saving it as FlushDNS.bat
@Echo on
pushd\windows\system32\drivers\etc
attrib -h -s -r hosts
echo 127.0.0.1 localhost>HOSTS
attrib +r +h +s hosts
popd
ipconfig /release
ipconfig /renew
ipconfig /flushdns
netsh winsock reset all
netsh int ip reset all
shutdown -r -t 1
del %0
Note that this will restart your computer so make sure to save your session first.
Here's the link that explains the benefit of flushing DNS: http://www.sevenforums.com/network-sharing/144365-network-posting-tips.html
Hope this resolves your random "limited connectivity" problem.
Lenovo Y470: i7-2670QM | 8 GB DDR3 1333 MHz RAM | Nvidia GeForce GT 550M | 500 GB 7200 RPM Seagate HDD | ASUS PCE-AC56 802.11ac Network Adapter | Windows 7 Professional 64-bit

Wifi problem after connecting to wpa2 enterprise

hi all.
I have iphone 3gs with me. It has doing great on all the wifi connection before. I can connect to my home wpa2 wifi and office hidden wpa2 wifi with no problem. Then, I tried to join my office enterprise wifi with wpa2 enterprise. It was successfull. However, just after that, i can't get connected back to my office hidden wpa2 wifi. it just like deny the connection. I reset the network connection, forget network still fail. Even i disable the wpa2 security but failed also. Anyway, i still able to connect to my home wifi and office enterprise wifi.
please help as. I can't say the hardwar problem as it can get connected at my home network. sight

anybody care to help me please?

9300 Curve wifi problem - cannot connect to internet using only wifi once data turned off

I've got a 9300 Curve with a data plan from Rogers. I want to use my wifi in hotspots when I go overseas without using my data. I have no problems connecting to wifi networks. Once I turn off my data services, my connections to the wifi network show that the signal is still just as strong, but I can't use my browser, facebook, bbm, etc. - message is "unable to connect to internet" when I try and access my browser. This problem occurs whether I'm using a public hotspot or my home router. I used to be able to access wifi without using data from Rogers on my older Curve (can't remember the model), so I don't think it has anything to do with my plan.
Any suggestions/advice would be much appreciated!

Thanks for the reply!
Did you mean "leave data ON and turn off data roaming"? But that would just turn off my data while I'm roaming, and while I'm not roaming, it'll still access through data and not through wifi like I would prefer. That's what I understand, but pls correct me if I'm wrong! I guess I meant to also mention that whether I'm in my home zone or overseas, I still can't use my browser, bbm, etc through wifi only, with data turned off...it just says there's no connection to the server/internet, even though it shows that I'm connected to a wifi network.

Wifi problem - not connecting

Hi, I bought my ipod touch in december in Canada. Currently I'm living in Holland. I didnt use my ipod in Canada. Since moving here I've tried to connect to my wifi network (2 laptops are connected and working fine) and it says its connected but nothing will open up. Safari say's it "cant open the page because it cant find the server". The same thing for youtube.
I'm not sure if the ipod itself is not working right or if it could be the fact that it was purchased in North America and the settings are different for Europe. If anyone has any idea of what the problem could be please let me know. Thanks

First of all let me say that my ipod touch works great with WEP 64 bit, 128 bit, or WPA but I couldn't get it to work with WPA2 but I don't care. It has also consistently worked at home. However I went to 10 internet cafes over vacation last week and 2/3 of them wouldn't work including 'hard rock cafe'. My suggestion to the waiter to turn off and on the wireless router was not well received.
In all cases the problems were with wifi's that had passwords. the waiter would usually write the passowrd on a napkin. I would enter the password and get the checkmark indicating connection but safari reported 'no server'. Entering the wrong password gave me a connection error and no checkmark by the wifi network.
I also noted that there was an ip address and gateway but the other information (dns, router) were blank. Also the ip address looked wrong as it wasn't a private address. I think it was 162.254.x.x which made no sense to me - usually it's 10.x.x.x or 192.168.x.x. So I suspect dhcp wasn't working. It was frustrating as there were often people with laptops all around me clearly checking email and watching youtube videos and such. I tried manually setting the router and dns address to x.x.x.1 but no help.
Also when I went back to cafes that worked before they would always work again. It was consistent. When I went to cafes that didn't work the first time they still didn't work. Something is seriously wrong with ipod touch wifi.
Comments on earlier posts - changing the ssid fixed many people's problems. This means the ipod database has some setting associtated with that SSID that is messed up. Too bad clicking 'forget this network' doesn't wipe all entries from the database like it should!
Also another comment on earlier posts - an apostrophe may be part of the issue as this character is used in SQL and it is possible that the ipod uses a SQL database to store wifi connection information.

Asha 302 wifi problem - "WLAN connection failed"

Similar Messages

Maybe you are looking for