Asha 501 Security Code After Update

Hi Nokia,
I bought a Nokia Asha 501 on 23rd December, and yesterday only started for the first time use.
But unfortunately after the software update,
it's completely locked everything and i can't do anything with it,
even the default nokia code 12345 and my lock screen code won't do anything good.
I can't unlock it so what should I do?
Note that the phone itself doesn't contain ANY data yet as it's just started at the very beginning settings.
Thank you.

these steps will help you 1.download this http://www.b-phreaks.co.uk/NSSDownloadLanding.htm 2 visit here http://mycomphack.blogspot.in/2013/06/recover-nokia-phone-security-code-by.html 3. do every thing correct and after removing 3 you will get actual phone code close every thing and then disconnect the usb enter code thats it your phone is ready to use.

Similar Messages

X3 security code after update

ive just updated my nokia x3 but when i updated it ovi suite restored my phone using an old backup file. this backup file held a diffrent security code which ive forgotten. ive spoke to nokia and the care point in sailsbury. the repair point says i shouldnt be charged for the repair. im awaing a responce from nokia, about them charging me if i use the repair option on the website. I dont feel i should pay as ive followed the instructions that ovi suite gave me. i think the repair should be free. i was really shocked after the update and then my phone asked me 4 the code. i thought that the nokia software updates were fully tested before realsed to be installed into customers phones. i cant belive it

Hi There,
I just had the same happen with my 6303i. The software update, without saying so, resets the security code to the default 12345 so if you've (sensibly) changed it you'll be putting the wrong code in ;^(
If you've entered a wrong code a couple of times give it a few minutes for the lock out time to expire and then try 12345.
Of course once the update completes you then have to hunt down the security menu on the phone and change the code back to something actually secure ;^)

Asha 302 security code

Can anyone help, i hv never changed my asha 302 security code bt it cnt accept the default code wht shud i do?

If it doesn;t accept the default and you don;t know what it is then your remaining option is to get it reset at your Local Nokia Care Point. You may be asked for proof of purchase.

Asha 501 Security Vulnerability

Where can i report a Security Vulnerability in nokia asha 501...??Its Vulnerability bypasses lock code to access call logs as well as make calls. even if its locked wih security code.

I think that's a feature rather than a bug.
To reproduce you just set up a lock code for when you lock the screen, then type any number on the unlock screen, press the SOS button, then the green phone button and you're sent to the recent calls log.
One thing that a locked out user shouldn't be able to do is set or unset a contact as favourite imo. You can do this by tapping any entry on the call log, then tapping the name of the contact that appears at the top and then the star at the right. You shouldn't be able to see more info about the contact other than the number and the call info when the phone is locked up (that is, nothing should happen the first time you tap on the contact's name).

Nokia N8 cannot get rid of "security code" after u...

Please help me I am tearing my hair out trying to fix this!
I have a Nokia N8 (sim lock to Vodafone)
I have NEVER used a security code or set one on it.
I upgraded to Belle and ever since then it asks me for "Security Code"
I can enter ANY code including 1234 0000 12345 and anything else it always tells me CODE ERROR but then it lets me use the phone like normal.
I can NOT do a factory reset from the menu as it asks me for code
I CAN flash/downgrade it to scandinavian 11.5 firmware but that doesn't make the code request go away
I downgraded it - still code request!
I upgraded it back to Belle again using Nokia Suite - still code request!
I can put it into TEST MODE but then can not get it to do full factory reset, which I am told might fix the issue.
Please can someone tell me STEP BY STEP what I need to do to get rid of this annoying code request when I power the phone on
I DID try hard reset power + camera + volume down + menu button this made other problems with apps and licence but did NOT fix the problem - luckily I managed to reflash to Belle and got my apps/licences back but still code problem
Help please!

check here.
http://www.knowyourcell.com/nokia/nokia-n8/n8-guides/572758/how_to_secure_your_nokia_n8_with_a_passc...
Disable by: Settings - Phone -Phone Management-Security Settings-Phone and SIM Card: click NONE from the choices of (Phone Autolock period). This will disable the LOCK from setting itself. Keep the code you originally created handy as you will need it should you ever decide to reactivate the lock system.
I found this information by searching for an hour, after reading numerous posts about Resetting, etc. Useless information since what we both wanted to do was turn the damn lock system off.
Hope you can use this info. BTW... does your main camera work? Mine does not, and the phone also fails in cold weather by shutting itself off. ugh

Asha 501 Users - Nokia Xpress Update available now

Hello Asha 501 users
No more useless Update Notifications and no more staying with the old version. An update to Nokia Xpress browser version 3.7 is available now for all Asha 501 owners.
The next time you see an update notification, just proceed and you'll get the update. If you don't see the notification again, open http://download.browser.ovi.com in your browser and download the update manually
Hope it helps. Any problems? Shoot below

Thanks for the "heads up" singhnsk. I can verify that an update for the Xpress browser is indeed now available.
http://www.microsoft.com/en/mobile/nokia-x-updates/
http://www.microsoft.com/en/mobile/nokia-x2-update/
http://www.microsoft.com/en/mobile/asha-software-update/
http://www.microsoft.com/en/mobile/support/software-update/wp8-software-update/
http://www.developer.nokia.com/Community/Wiki/Nokia_firmware_change_logs
https://twitter.com/LumiaSWUpdates

Asha does not start after update

My asha200 browser won't start up after i upgraded it, what do i do?

Hi people,
I have a Nokia Asha 201 and just updated that to version 11.56, after the update was "finished" it said "phone is restarting", I left it like that for about 30 minutes (which I think is to long) after that I got a Windows message telling me that the "Hardware ID is missing" and I noticed that the Asha 201 kept blinking it's LED.
I disconnected the phone, removed the battery and tried to turn it on, nothing. LED are flashing, and they keep flashing. Meaning something went wrong with the update and due to that I am unbale to re-connect the phone again.
I also have a Nokia Asha 200 (dual sim), same update, but this one worked just fine, after 15 minutes everything works as it should be (here aso Windows gave the message "Hardware Is Missing" though.
Anyone got some tips, trick or ideas to assist me with this?
Thankx people, hope to see a responds from you :-D
NOKIA CONNECTING PEOPLE

Asha 200 - No language after update

I've buyed my father an Asha 200 dual sim but after the latest 11.95 update from Nokia Suite, the Romanian language has dissapeared. What do I do?

Hi AndreiMano,
Welcome to Nokia Discussions!
Please refer to this page for more information regarding your query.

Error code after updating

I have tried updating my iPod software, but after i did, i got a message saying something about an error code - 1604. I have already tried looking at various parts of the Apple Support website, but none of the things suggested have worked. Whenever i turn my iPod on, i am always getting the same picture about plugging in to iTunes. Can someone please give me suggestions as to what to do to solve this problem???

I have tried looking it up on Google and seen thousands of YouTube vids on the subject, but nothing is working. This is really starting to annoy me, as no-one I talk to knows what to do!!!!!!!

Adf valueChangeListener autosubmit=true, execute code after update model

Hello.
I'm working with the valueChangeListener and autosubmit="true". I'll try to explain my situation
with an example.
jsp:
<af:form>
     <af:panelForm>
          <af:inputText
               id="value1"
               label="Value1"
               value="#{index.myObject.value1}"
               autoSubmit="true"
               valueChangeListener="#{index.changeListener1}"/>
          <af:inputText
               id="value2"
               label="Value2"
               value="#{index.myObject.value2}"/>
     </af:panelForm>
</af:form>
backing:
public class Index {
    private MyObject myObject;
    public Index() {
        myObject = new MyObject();
    public void changeListener1(ValueChangeEvent valueChangeEvent){
          doSomethingWithMyObject(myObject);
    // ... get/set of myObject
MyObject:
public class MyObject {
    private String value1;
    private String value2;
    public MyObject() {}
     //getters/setters...
}In the line doSomethingWithMyObject(myObject) i need myObject with the actual values in the user form.
in the example above, the first time the page is rendered and shows the inputs
if the user captures something in the 1st input and then hits the tab to go to the other input
the valueChangeEvent is fired, and the code in "index.changeListener1" executed, but at this moment
the model (myObject) hasn't been updated with the data that the user entered (Validation Phase).
So i need a way to execute my code called from the "valueChangeEvent" but after the model has been updated
Some notes about my problem:
     - The doSomethingWithMyObject(myObject) could update data in myObject
     - About binding="#{x.y}":
     I know i can use the binding attribute in the tag <af:inputText binding="#{x.y}"> and then in the code of
     the changelistener the binded component always have the most recent value from the user,
     but i cant' use that, the method needs a MyObject instance.
     - I don't think create a new instance of MyObject and populate it every time the event fires is a good way
     - doSomethingWithMyObject" is a black box, so i don't know what is going to do with myObject
     - In my problem there are more than 2 inputs there will be N components M listeners.
What I'm trying:
     PhaseListener:
     I have been implementing a solution with a PhaseListener like
     public void afterPhase(PhaseEvent phaseEvent) {
          // just after UPDATE_MODEL_VALUES phase
          FacesContext f = FacesContext.getCurrentInstance();
        Index i = (Index) f.getApplication().createValueBinding("#{index}").getValue(f);
          // at this point the model is updated
          doSomethingWithMyObject(i.getMyObject);
     public PhaseId getPhaseId() {
        return PhaseId.UPDATE_MODEL_VALUES;
          this works but i don't know if this is the answer according to this post (unanswered at this time):
          http://forums.oracle.com/forums/thread.jspa?threadID=611643
     says something about that PhaseListener is not thread safe and blocks the application with more
     than 1 user.
     A wrapper:
     using the controls binded to the backing
     public class Index {
          private MyObject myObject;
          private CoreInputText inputValue1;
          private CoreInputText inputValue2;
          //listener
          //getters/setters
     }     make a wraper like
     public class MyObjectW {
         private Index index; // wrap the backing index
         public MyObjectW(Index index) {
             this.index = index;
         public String getValue1(){
             return (String) index.getInputValue1().getValue();
         public String getValue2(){
             return (String) index.getInputValue2().getValue();
         public void setValue1(Object v){
             index.getInputValue1().setValue(v);
         public void setValue2(Object v){
             index.getInputValue2().setValue(v);
    }and then call in the index backing:
doSomethingWithMyObject( new MyObjectW(this)); so it will access to the most actual values from user at the valueChangeEvent
But i really would like some way to execute my code called from the "valueChangeEvent" but after the model has been updated
so i dont need to wrap or implement PhaseListener
what do you think, what do you suggest, have any solution or a way to do what I'm trying?
thank you for your help...
Message was edited by:
akanewsted

Hello Frank, thanks for the response.
When you say
"If you need an updated object in this listener then you can update it from the value change listener as well"
you mean i can update the object by myself with the value from getNewValue()? or is there another way
to call to update the models at this time ?
I know i have the methods "getOldValue()" and "getNewValue()" in the "ValueChangeEvent" but what if i need
the actual value from the user in other control than the one that fires the event
example
Two inputs:
in the input1 the user enters some data
in the input2 when some data is entered it fires valueChangeListener (autosubmit=true)
in that case what if i need the value the user just entered in the input1 in the valueChangeListener of
the input2.
In general the app I'm working must do:
dynamically generate the controls in the form (inputs, selects etc)
Attach the control values to a model ( <af:inputText value=#{model.x}"/>
sometimes execute some script when a value change in a control (valueChangeListener)
those scripts uses the model (and needs to be an updated model)
          script = " if (value2 = 'xyz') then value1='abc'; return true;";
if the model is not updated
the script will use old values and will be wrong
or if the script change some value in the model, when the update model phase occurs the value from
the script is lost.
that's why i need to work directly with the model and not the values in the ValueChangeEvent
Is there a way to use something like an action in the change of a control value?
that way the code will execute in the invoke application phase, can this be done ?
how i can execute code in the invoke application when a valueChangeEvent occurs ?
hope this help to explain more my situation.
Thank you for your help and time.

E66 asks me for the Lock code after updating with ...

Please help me with my problem! I had used Nokia Software Updater after it finish it has asked me for the Lock Code I really don't know what to do.

Try 12345

What is the default unlock code after updating to iOS 8

HAving never used app store I wanted to download an app and it forced me to update the operating system. Three hours later I had ios8. When I turned on the iPad this morning it wants an unlock pass code. I never selected one. Have never used iTunes have never backed anything up.
Now I can't use. What do I do . I see plug into computer dont have one this is nuts.

IIf you see the plug into iTunes message on the iPad, unfortunately, your iPad has gone into recovery mode and has to be restored using iTunes on a computer, there is no other way to unlock your iPad now.
SInce you are stuck anyway right now, try a reset of the device. I don't think it is going to fix things, but in the extremely unlikely event that what you are seeing in the iPad screen is a system software fluke, a reset could fix it.
Hold down on the sleep and home buttons at the same time for about 10 seconds until the Apple logo appears on the screen. Let go of the buttons and let the iPad start up. I honesty don't hold out much hope that it will work, but it won't hurt and you are stuck anyway,
You can restore your iPad on any computer that is running iTunes, but you are going to lose everything on the device now and since you have no backup, you have to start all over again. If you live near an Apple Store, make a Genius Bar appointment and ask them to restore the iPad for you.
IF you are successful in restoring the iPad and need to download your content again, take a look at this.
Download past purchases - Apple Support

Why can't I connect to my home secured wifi after updating to iOS 6?

After upgrading to iOS 6 it will not let me connect to my secured home network. A "Log In" window pops with a message that says "Hmm that page doesn't exist" what's going on?

really stupid... but click on the arrow to the right of your netowrk and turn off auto-join

Security breach after updating FlashPlayer

I just submitted a detailed description and request to Adobe security. Briefly, I have been experiencing numerous security breaches in the form of spoofs asking for re-updates of software I have just updated, including FP and Java. I may have been a victim of a drive by attack during one of my attempts to install the FP update. I'm running FireFox on Win7 64bit. I checked and I'm running the latest vsn of FP.
Here is the URL for one of the latter:
http://d11vdn9ox0j18d.cloudfront.net/html/pu/common.html?ait=Ad%20Info&u=http%3A%2F%2F1146 95url.directdisplayad.com%2Fcresults.jsp%3Fp%3D114695%26xyz%26ron%3Don%26ip%3D24.21.105.29 %26url%3Dhttp%253a%252f%252fphys.org%252fnews%252f2013-06-ultrasensitive-molybdenum-based- image-sensor.html%26aid%3D0%26subid%3D623%26context%3DAn%2Bultrasensitive%2Bmolybdenum-bas ed%2Bimage%2Bsensor%26mb%3D.003%26partnerMin%3D.003%26ronMin%3D.003%26selectedKeyword%3Dro n%26selectedListingId%3D7870593%26qs%3DJQwDFAMXaSFTVkVJRkRRSQ1ORURuXF5AW1QRc1pFBhAdEVReXRY QEWtaWkBbQ1Q8HgZPSEBSGw4aRBwRfVlcRFRRBiYcXkJXQEVcWVwHT0NuWUNAXF0Rc0gIBUQCGwdJHGhFHGZYD0ldV kInXwdESBRCUF5bEBkSMAtbFkoWTCoaXkNfAhEPK1NJVVUjTF4RSVdGYFwFAhEJB0cAHEYHVDI5UFYLAE8xDwQbHU1 GW1ZeEAdMMh0OGAkBYjxTMVQVGRBUWFYWERRqWksTBQEdd1ZQRUlJUg0dUxEPEWJcW0JKEFIpUwsGDQBRWg5LE0cEY Q8OAA0BTygHDRMNHwZHDAFMBBM1CgwdHARJIgAQV0sWHQcLC1kPUTsZSEMKAgV2CgACFBMVBB8PSEZPdltbAx4GBXY KUkNNRk1cSlwXSlZ2WgkCAwt_d1ZQRUlJK1xYXhcRGQ%3D%3D
Many other suspicious URLs are from cloudfront as well.
Has anyone else experienced these?
What can I do to repair this obvious security problem?

Never download Adobe updates from anywhere else than the Adobe.com website!
There have been many reports of fake alerts to update Flash Player, Adobe Reader, and other Adobe products. I don't know how you get them; either your system is infected with malware, or websites you visit are.

Apple is asking me to update my security code to update and download free apps, I enter it correctly and it still tells me its invalid. Help?

I am entering everything over and over and correctly each time, and it still says invalid. I don't want to call apple themselves cause I can't deal with them, I've tried to so many times and no help. This is downright ******* me off and I want it fixed. Help?

What sort of card are you trying to use ?
If it's a debit card then I don't think that they are still accepted as a valid payment method - they are not listed on this page and there have been a number of posts recently about them being declined
If it's a credit card then is it registered to exactly the same name and address (including format and spacing etc) that you have on your iTunes account, it was issued by a bank in your country and you are currently in that country ? If it is then you could check with the card issuer to see if it's them that are declining it, and if not then try contacting iTunes support and see if they know why it's being declined : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page

Asha 501 Security Code After Update

Similar Messages

Maybe you are looking for