AshTray and Bluetooth install problems

Was trying to install some old games on my ideapad S10e and somehow resorted to using AshTray custom resolution app (used with eeepc to help run certain games).. well to cut a long story short.. Dont use this app i was able to play a game (diablo2) but it changed all the default resolutions. In the end there was no way i could go back to the native resolution so i had to opt for first time pressing the F11 Recovery button.. took a little while but it did complete the process with fresh factory settings and rez back to normal. Then after that i check my device manager and it said that the bluetooth device wasnt installed. Strange cos everthing else was installed ok. I downloaded the bluetooth drivers for my S10e and clicked install.. it looked like it installed but for the life of me i still couldnt figure out why bluetooth was still yellow in device manager. Well just as i started writing this i figured it out if anyone else comes upon this problem (noob trap). Basically the BT drivers are "extracted" to C:\DRIVERS\WIN\BTW\54bl03ww and you need to run the setup.exe then it installs properly. I know im a noob but i would of thought it installed automatically like all the other device drivers. Quite impressed by the recovery mode appart from the BT hiccup it worked as good as i would expect.
oh well Panic over S10e is back to normal

Now the email began to work again:mansurprised:
Still having problems with bluetooth handsfree device: E 75 doesnt even ask passwords when I try to connect bluetooth handsfree and cant establish connection with voice devices. Bluetooth still works fine with my laptop or other phones! Does anyone have solutions?

Similar Messages

Primairy IDE and Windows Install Problems!

Hail all, I have had this issue the last 48 hours for the most part, but it started last monday night..
I orderd all my stuff from newegg.. I got:
Intel 775 Socket 2.8ghz Prescott
ECS Mobo (psh model)
2x 512mb DDR 3200
Western Digital 80gb Hard Drive at 7.2k RPM (my only OEM item)
Chaintech GeForce 6600 GT video card
Jaht ( I think? :p ) Wireless PCI Adapter (can't have wires running in my room)
Aspire-X Dreamer II Case
Rosewell DVD/CD-RW combo (very cheap).
Anyways, I hooked it all in and it wouldn't give a signal to my monitor. I found out a small mount was hitting the mobo, and it was probably damaged. I got a new motherboard on Friday (which was all of my paycheck being as young as I am), the grand MSI 915P Combo. Oh, it was so shiny and awesome!
I got a signal to the monitor, and it started up. I put in a floppy for the latest BIOs and it seemed to go right. I put in my WinXP disk, and rebooted. Do do do, it starts to do that 'pre-'load Windows thing. When the little message at the bottom says "Loading Windows Setup". I am thinking "so leet ".
When, HELLO, my first Blue Screen of Death (before I even installed Windows! I love that). It says check for Virusis (I havn't been on the internet..) and uninstall any new HDs and such. Well, that confuses me. So.. I put in my friend's very very old HD (which has tons of buggies in it BTW) and that loads fine. So I put mine back in, skim through my BIOs and I notice that the HD is the Third Master IDE, and that my CD-ROM slot is considered RAID.
What the hell?
I am going to install the older set of BIOs for the 915P Combo from July instead of the September ones and hopefully that'll fix it.
Has anyone else had any errors like this? Thanks - Erik

you skiped the part about him buying the msi board.
Anyways, I hooked it all in and it wouldn't give a signal to my monitor. I found out a small mount was hitting the mobo, and it was probably damaged. I got a new motherboard on Friday (which was all of my paycheck being as young as I am), the grand MSI 915P Combo. Oh, it was so shiny and awesome
try switching the jumper on the hard drive make sure its set to master it could be on slave and casuign some problem. I know for some odd reason when my 1 of my drives is in a differt location i cant boot windows i move it back and its good.

InDesign CS6 uninstall and re-install problems

Okay. I had a project to work on for a class I'm in and wanted to open Indesign CS6 on my computer but I kept getting crash reports and the program would not open. So.... I desided to uninstall it and re-install it figuring it is still part of my on-going cloud membership here, but now the program is not listed...so ... how do I get it back???

Hi, Thanks for this link, but it does not help. I was a creative cloud
member when the CS6 software first came out and so.that was how I came to
have the CS6 InDesign. So....I have no serial number. And yes, I do have
InDesignCC now, but I want to work on my project in a college classroom
that only has CS6 on the computers...and so I want to use it at home to
transport back and forth and without saving to CS4-level.

Solaris 9 and Updatemanager install problems

I recently installed the Sun Connection on a Solaris 9 setup. I had to load JDK 1.5.0_12 packages and then install the Sun Connection products.
I was able to finally see that "updatemanager" is present. It worked great. It accepted by contract information. I tried to load five security patches including a kernel patch. It worked. After the reboot however, the updatemanager GUI only reports the dialog box "unknown subcommand getdocument". While it invokes, it no longer has information. I have experimented with JAVA settings and path statements. What can I do next?
The install was downloaded from a Sun site and it says Sun Connection Update Manager v1.0.10 - 22 August 2007 from the README. What can be done to get "updatemanager" to invoke again and not abort so early in the analysis?

Are they going to put out a patch to fix what they broke?
I have the same issue. Got to love the lack of QA. At least I'm very used to it after a couple years. :-)
--Jeff

Mac Mini and Bluetooth Recent Problems (Mighty Mouse, Wireless Keyboard)

Hello there,
I have an issue with my Mac Mini.
We had a storm here recently, so I switched my Mac off. After that, I turned it on, but to my surprise my Wireless Mighty Mouse and Wireless Keybord do not function any more. The green dot under the mouse nad keyboard flashes for a few seconds and turns off. I tried to plug my regular mouse and keyboard but it seems the do not work too. Any solutions?

i dont know if you have another mac around but have you tried repairing the disk by putting it into Target disk mode and hooking up another mac to it? if nothing else, try putting the install CD/DVD and boot from there by holding down "c" as it boots. if that works then it may just be a bad BT card. if it doesnt work then you may have bad usb ports. i hope you have applecare!
a tip for bluetooth HIDs, spread them apart. you will experience problems on occasion where their signals get crossed and they fail to sync right.
by the way, if you went the extra mile to turn off your mac because you were concerned about it, then why didnt you just unplug it from the outlet?

MacBook pro, snow leopard, iPhone and Bluetooth PAN problems

Short Version:
I am having connectivity issues connecting my new MacBook Pro (MBP) to the Internet thru a Bluetooth PAN on my iPhone4. This has been working fine for a few days and then today it just stopped working responding that my iphone connection is not available, it's off, too far away or whatever. This is not the case. When I try to connect the iPhone to the MBP the iPhone is saying my MBP is not supported. I can pair the devices, but as soon as I try to connect to the Internet thru the iPhone via the MBP the connection fails.
Long Version:
I received a shiny new MacBook Pro only a few days ago and I am having Bluetooth Paired networking issues as of today, 2nd, March, 2011. The MacBook Pro is running Snow Leopard 10.6.4, and is brand spanking new, unmodified, factory defaults.
The iPhone(s) I am using are iPhone 4's with iOS 4.1
On the first day I paired the MBP with both iPhones with ease, it was so easy my grandparents could have done it. So point and click and it just worked....
The iPhones are set up in iTunes with names similar to dave1 and dave2
On the MBP I can select which device I want to connect to the Internet by going to the Bluetooth icon and connecting to whichever iPhone I have handy at the time. Since the plans are limited connectivity, I do load share between the two.
Today, for no apparent reason, I have been unable to connect to my wife's phone just getting a basic "The Bluetooth network is unavailable" message telling me the iphone is out of range, not on, etc etc etc. Not true.
No problem, I just connected to my phone instead. Occasionally I tried her phone again, but it just never worked. I eventually got her to reboot it, still no joy.
Then, a couple of hours ago, while in the middle of reading my rss feeds, my Bluetooth connection dropped out. My phone is sitting right next to the MBP. So that's not the issue. No amount of reboots of either the MBP or the iPhone have fixed this. I have unpaired and repaired the devices (on both phones) countless times. I have removed the sim card and rebooted, I have disabled and reenabled Bluetooth on both, rebooting before doing this, and after and during, I have reset network settings. Nothing I try is working here.
Pairing alone is an event, but here's an example of what's happening:
I go thru the motions, the MBP shows me a number (eg, 451234) and the number is displayed on the iPhone. They see each other. The numbers are the same. Good. I click PAIR on the iPhone and MBP and everything appears good. But then if I go to connect to the iphone on the MBP I get the out of range error.
I have made both discoverable, and tried to connect to the MBP from the iphone, and got a different error message altogether: Connection Unsuccessful - "{insert my name}'s MacBook Pro" is not supported. W-T-F? It was an hour ago? What has changed?
Then, the only option on the iPhone is to "Forget Device". ok, forget it, and start again. Same same.
Neither the iPhones nor the MBP have been upgraded or changed in anyway today, or even recently. In fact, as mentioned earlier, I was actively using the connection without any issues for a number of hours when it just stopped for no apparent reason.
Not that these matter, but I am in Thailand (live here for the time being), I'm on the TrueMove network, which offers 3G coverage in my area (Patong Beach).
This could easily have been filed under MacBook Pro, iPhone, OSX and possibly many other discussion headings, because the issue can be any or all of the OS, the MacBook Pro Bluetooth adapter, the iPhone Bluetooth, (iOS for that matter), or some other unforeseen conditions...
My head is sore from pulling my hair out. I am open to any suggestions (reasonable or otherwise!)
For further info (not that this post is long enough already, or anything, but), I thought it was interesting that the phones didn't fail at the same time, so I pulled out an old iPhone 3GS and set it up, but after pairing, the two can still not connect.
I know its not an issue with the data plan on the iPhone since I'm here surfing now without an issue, so it's not a data problem.
Open to ideas....
If you've read this far and you're ever in Phuket, give me a call... I'll shout you a beer

Ok, now I do wish I could edit....
I forgot to APPLY the network settings for the USB cable to work. Connected thru USB I can tether.
So, I kept playing, and playing some more...
I had previously unpaired everything, and gone as far as removing network devices HOWEVER...
I didn't remove the Ethernet, Firewire or Airport Network devices.
Now, I have done so. I REMOVED EVERYTHING
No pairing, no network devices.
Bluetooth was already turned off, and I rebooted.
I turned off tethering and rebooted the iphone.
I turned on bluetooth (on the MBP), I turned on tethering. I browsed for the iphone. It said I was already paired???? Ok, repair AGAIN, and THE IPHONE SHOWED MY BLUETOOTH TETHERING BLUE BAR at the top of the screen!
I opened a web page, no go... d4mn, I was close...
Opened network preferences and the created a new bluetooth PAN and voila! Internet back on the MBP. I am about to reinstall the ethernet and airport (I can live without firewire for now) and see what happens.
Basically, the link I posted two posts ago, I had already done that, but I NEEDED to remove ethernet, firewire and airport as well...
So MAYBE it's fixed, we'll see for how long. I'm not going to mark this as answered for now, because basically, it has failed for no reason, and I want to know why...
Hopefully someone can come up with something, but having to delete and reinstall all pairings and network devices (to me) is not really a solution, it's a workaround (at best).

Wireless Mouse and Keyboard Install Problem

I am trying to install my wireless keyboard and mouse onto my Mac OS X 10.3.9. My dad had this computer before me and had the mouse and keyboard paired and working. After it was shipped to me, I attempted to pair these again with no luck. THe bluetooth won't recognize either and if i try and run the KeyboardandMouse.pkg as instructed, the icon simply isn't there when I insert the disk. I've attempted to pair using the system preferences, but it cannot locate either the keyboard and mouse. Yes, I do have new batteries installed and the lights do blink when switched on. Any help is appreciated. Thanks.

Hello again:
Try trashing the BT preference file (com.apple.bluetooth.plist) and restarting.
If that does not work (although it will take you a bit of time), I think I would try an archive and install:
http://docs.info.apple.com/article.html?artnum=107120
Barry

Itunes and quicktime install problem

I have just bought an ipod classic. went to apple.com, downloaded latest version of itunes, on the install i get an error saying some of the quicktime software is out of date to fix this problem by upgrading click 'Go there now'
unfortunately it doesn't go anywhere!
itunes will not start because of this either, it says it has a problem and needs to close.
I have tried installing older versions of itunes,Quicktime;un-installing,re-installing,installing seperately, from different sites as well as apple, butit ends up the same.
im only running windows firewall and AVG anti virus.
can anyone help me as to why i can't install them especially Quicktime as it seems i need that for itunes and i need itunes to load the ipod!
Please help if you have any ideas, i've been trying now for 5 hours!!!!

Try installing from here:
http://www.filehippo.com/downloadquicktimeplayer/
If that doesn't work, try and use Microsoft's Cleanup Utility and then reinstall Quicktime/iTunes:
http://support.microsoft.com/kb/290301
Make sure it's a new and fresh download from:
http://www.apple.com/itunes/download/

Win2K and WinXP Install problems on ms6337le5

Hi,
I've had a Ms6337le5 motherboard for a while now and have been using Windows 98. I got sick of Windows 98 crashing every two seconds so i decided to go with Windows 2000 or XP, but to my surprise, both of them WILL NOT install. It says it cant read driver.cab off the cd, but the cd is brand new, i even tried a mates cd and it had the same problem.
I have the latest Bios for my mainboard (7.3) and the latest intel INF driver installed also. I actually did succeed once in getting Windows 2000 to work but then everytime i tried to access a CD my whole computer would crash.
This has been a problem for a while and i was wondering if anyone could help?
My system specs are:
Intel Tualatin 1.2ghz
512mb SDRAM
20gb Hard Drive
MS6337LE5 Mainboard
Soundblaster Live! 5.1 Gamer soundcard
Geforce 4 TI 4200
Aopen 16/48 DVD Drive
Acer 24/10/32 burner
Direct X 9b
Thanks,
Razor.

http://www.msi.com.tw/program/support/manual/mnu/spt_mnu_detail.php?UID=267
http://www.aida32.hu/aida32.php
one of them should tell you

6300 and Bluetooth handsfree problem

I experience this problem with my 6300 and the BH-700 bluetooth handsfree : When the person on the other end talks my mic gets muted and he can't hear me. Ofcourse this also happens if the other end is at a noisy place and then communication is impossible since my mic is always muted.
This seems like a problem of the phone since it happens with any bt-handsfree. On the other hand the BH-700 works fine with all other phones I tried...
I upgraded my phone firmware from 4.7 to 5.0 but the problem still remains. I don't want to think that the hardware implementation of the 6300's bluetooth and simultaneously send and receive data!
Anyone this problem? Any possible solutions?
Thanks!

Hi,
I have simillar problem with BT handsfree - the other side has difficulty hearing me, while I can hear fine.
Do you have any further experience or solution?

Sound Driver and Driver Installment Problems

I have been having trouble trying to get my sound driver to work on my
MacBook Pro in Windows XP. After updating my MacBook with all it current
upgrades, I loaded up Bootcamp to install Windows XP now, I have followed
all the instructions in the guide and have succefully installed Windows XP but,
when I run Windows and start to install the Drivers from my Mac unto
Windows, close to the end I get a message that it could not finish properly.
Now, I find that all runs well except an important thing like my sound. I go
into the sounds control menue to see if there is a driver and as i suspect
nothing. I also check for my network and nothing and same for my eject
button, that doesnt work either. Please if someone can assist me on this
problem it would be much apprecitated and that way I can use my music
programs which I have not been able to use.

Your question has nothing to do with the installation of OS X. Post it in the Boot Camp discussions:
http://discussions.apple.com/forum.jspa?forumID=1165

Patch 10 and 11 Install Problems

My application worked very successfully, using the servlet with all patches up to and including 9 using the 1.1 Jinitiator versions. I wanted to look at the time zone features and applied patch 10, and then 11. The servlet test appears to work in the new patches 10 and 11.
Using the latest 1.1 Jinitiator in either patch 10 and 11, I get "92102 - Negative or zero content-length" when starting the application. Does anyone know what this means, and/or what cures the problem?
Using the 1.3 JInitiator, I get "frm-92150 Web Client Version too New" I have not seen this one before either and scant reference to it - only on Solaris - with solutions not applicable to Windows 2000. Again any ideas are welcome.
Many thanks,

It's worth clearing the JInitator Cache to try and get rid of the Client too New message. The other error is due to a problem in the contents of the HTTP header - We've only seen that with IE on Mac and the Apple MRJ in the past - double check that you are using the correct Jinit 1.1 version for those patches.
If clearing the cache does not fix the client too new then try with one of the other JARS e.g f60all rather than f60all_jinit. It may be that the JARs are out of sync with the Server - for instance if something had one of the JARs open when you installed so it was not overwritten with the new version.

Win2k3 64 x86 and Appex instalation problems (missing OHS on companion CD)

Oracle guys,
I do understand that Windows is not preffered OS for Oracle...but most of us Oracle people have laptops and on them Windows OS (from Win2k, Win XP, Win2k3, Win2k364...tomorrow maybe Vista).
 So we, with new 64 bit CPU, would like to use all the potential of the hardware. I do not want to describe why 2k3 is very stable and secure platform...but after Win2k this is one of the most complete OS from MS (IMHO).
 So, please give us a note what to do if we want to use Win2k3 64 server x86 version and Oracle10gR2 64 for x86 and want to develop Appex on this database.
 Missing point is OHS (it is not on companion CD)-so any suggestion what to do is appresciated (If standalone Appache is solution please let us know which version would suite best...and do we have to install "mod" parts...
 P.S.
 I know that Win2k3 64 bit and Oracle WinNT32 is not recommended combination (I have some listener problems so I decided to quit this combination)...so I'm exploring Oracle 64 bit usage-but now I'm stucked!
 P.S. II
 I have put this question on Appex group but no reply at all (some other users have joined me in questioning this). So please if this is not the right place, could you lead me where to post this topic?
 THX!

How about installing HTTP server as Oracle Application Server 10g. Even if it is not supported it may work since this is just for development on your laptop.
Alternatively install Database XE which comes with Apex 2.1 ( but not the latest version 2.2).
I have just hit the same problem. I have installed database and companion 10 R2 10.2.0.1.0 with patch 4547918 to 10.2.0.2 on my MS WIN x86 64 bit laptop. I wanted to install Apex 2.2 on top but have no HTTP server. Thanks for pointing out the release notes.
The getting stated page of the documentation on the companion cd states you can install the following 2 installation types:
* Oracle Database 10g Products: Includes Oracle Database Examples, natively compiled Java libraries for Oracle JVM and Oracle interMedia, and knowledge bases for Oracle Text.
* Oracle Database 10g Companion Products: Includes Oracle HTTP Server, Oracle Workflow, and Oracle HTML DB.
But as we have found you can only install Products not Companion Products on 10g Release 2 (10.2) for Microsoft Windows(x64).

6230, TomTom and Bluetooth authentication problem

I have a 6230 and have just bought a TomTom Go 710 which connects via bluetooth to the phone for GPRS traffic updates. I have no problem pairing the two, but have to use the authentication code '0000' to authenticate the TomTom on the phone. I do not want to have to authenticate every time I connect so I have chosen to select 'yes' under the bluetooth option to NOT request authentication from the TomTom. This is where the problem lies - despite this selection I still get prompted for the code every time I switch on the TomTom. I have two other bluetooth devices paired - a PC dongle and a HDW-3 headset. Both of these are also selected not to require authentication and they are fine. I have also previously connected to a borrowed TomTom Go 700 and once paired this too behaved itself by not requiring authentication every time. I have tried everything that I can think of to cure this problem. I have removed the pairing from both the TomTom and the 6230 several times and re-paired them; I have selected 'no' to the 'requires authentication' prompt and then reselected 'yes'. None of these actions have had any effect. I have contacted TomTom and they are at a loss to understand the cause of the problem. Any ideas?

Hi, I have a TomTom 510 and have been experiencing the same problem. After much anguish at being pushed from pillar to post between Nokia and TomTom, I have been given a zip file by TomTom that has cured the problem and so at long last I no longer have to enter the access code every time.The file is :- Clear_Flash.zip . I suggest you contact TomTom on 08451610009 and ask them to e-mail the file to you.
Good luck

Mercedes a-Class and bluetooth sound problems

hi
both me and my wife have a iphone4 (4.3.5) and we are having bluetooth problems with her mercedes a-class 180, yes we can pair the phones but the sound quality is really bad. Once you are busy on a phone call you have to toggle between the iphone speaker and the builtin bluetooth to get better sound.
is there anybody that have the same issue? according to my local MB dealer it is a apple issue and not an MB problem.
anny ideas?

Yep, have a 2008 A-Class and have the same problem with an iPhone 4. Sometimes crystal clear but mostly like talking to a Darlek. Signal strength, motion etc dont seem to make a difference. Have searched the net in vain, did you find a solution?

AshTray and Bluetooth install problems

Similar Messages

Maybe you are looking for