ASI Transport Stream to Flash
Doing a proof of concept for a small prototype activity, and
would like to know if there's a way to go from an ASI stream (h.264
over an MPEG-2 TS) into the Live Encoder Server.
The documentation speaks to an MPEG2 TS as a valid container
supported by FMLE. Is there any information on how to do this
interface? All I read about are video/audio capture cards.
Thanks!
Hi here's an example of specifying si
<program
number = "0x6588">
<pmt
pid = "0x200"
pcrpid = "0x210">
<elementary-stream
id = "video_stream_2"
assoctag = "0x5"
pid = "0x210"
type = "0x02">
<!--
! data stream alignment descriptor
! alignment_type = 2
!-->
<generic-descriptor
tag = "0x6">
<bytes
hexdigits = "02"/>
</generic-descriptor>
<stream-identifier-descriptor/>
</elementary-stream>
<elementary-stream
id = "audio_stream_2"
assoctag = "0x85"
pid = "0x220"
type = "0x04">
<!--
! ISO 639 language descriptor
! ISO_639_language_code = "eng"
! audio_type = 0
!-->
<generic-descriptor
tag = "0xa">
<bytes
hexdigits = "656e6700"/>
</generic-descriptor>
<stream-identifier-descriptor/>
</elementary-stream>
<elementary-stream
id = "audio_stream_3"
assoctag = "0x86"
pid = "0x221"
type = "0x04">
<!--
! ISO 639 language descriptor
! ISO_639_language_code = "fre"
! audio_type = 0
!-->
<generic-descriptor
tag = "0xa">
<bytes
hexdigits = "66726500"/>
</generic-descriptor>
<stream-identifier-descriptor/>
</elementary-stream>
</pmt>
</program>
</transport-stream>
Similar Messages
-
Possible to Stream a Flash Presentation?
Hi all! I work for a university and we have some faculty that
are creating some huge flash presentations. I know that flash is
remarkably fast when it comes to downloading, but with these large
presentations it's still taking some time. Is it possible to
stream a flash presentation? Compress the audio? Any other
ideas?Never seen TGotoFrame, but there is GotoFrame() and Play(),
which has worked
well for me. Here's a function I've used to change videos in
a Flash movie
from image buttons in the HTML:
<SCRIPT LANGUAGE="JavaScript">
function changeVideo(xname){
if(window.brtv){
window.document["brtv"].SetVariable("theXML", xname);
window.document["brtv"].GotoFrame(0);
window.document["brtv"].Play();
if(document.brtv){
document.brtv.SetVariable("theXML", xname);
document.brtv.GotoFrame(0);
document.brtv.Play();
//-->
</SCRIPT>
Where brtv is the name of the div containing the movie.
Dave -
Head Developer
http://www.blurredistinction.com
Adobe Community Expert
http://www.adobe.com/communities/experts/ -
Hi I have installed wsus 3 sp2 on a win 2008 R2 Sp1
before the installation , I have updated the windows
I can open easily browse internet , but when I try to configure synchronization .but it fails.
No firewall , no proxy ............. I am behind a nat.
Wsus version is 3.2.7600.256.
I have searched and searched .....
Can any body help me
WebException: The underlying connection was closed: An unexpected error occurred on a send. ---> System.IO.IOException: Received an unexpected EOF or 0 bytes from the transport stream.
at System.Web.Services.Protocols.WebClientProtocol.GetWebResponse(WebRequest request)
at System.Web.Services.Protocols.HttpWebClientProtocol.GetWebResponse(WebRequest request)
at Microsoft.UpdateServices.ServerSync.ServerSyncCompressionProxy.GetWebResponse(WebRequest webRequest)
at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
at Microsoft.UpdateServices.ServerSyncWebServices.ServerSync.ServerSyncProxy.GetAuthConfig()
at Microsoft.UpdateServices.ServerSync.ServerSyncLib.InternetGetServerAuthConfig(ServerSyncProxy proxy, WebServiceCommunicationHelper webServiceHelper)
at Microsoft.UpdateServices.ServerSync.ServerSyncLib.Authenticate(AuthorizationManager authorizationManager, Boolean checkExpiration, ServerSyncProxy proxy, Cookie cookie, WebServiceCommunicationHelper webServiceHelper)
at Microsoft.UpdateServices.ServerSync.CatalogSyncAgentCore.SyncConfigUpdatesFromUSS()
at Microsoft.UpdateServices.ServeHi
yes . it is alloweded.
Nat rule permits any ip traffic . No problem with https...
also my windows is fully updated.
here is my netstat -an , maybe usefull.
TCP 0.0.0.0:135 0.0.0.0:0 LISTENING
TCP 0.0.0.0:445 0.0.0.0:0 LISTENING
TCP 0.0.0.0:8530 0.0.0.0:0 LISTENING
TCP 0.0.0.0:8531 0.0.0.0:0 LISTENING
TCP 0.0.0.0:47001 0.0.0.0:0 LISTENING
TCP 0.0.0.0:49152 0.0.0.0:0 LISTENING
TCP 0.0.0.0:49153 0.0.0.0:0 LISTENING
TCP 0.0.0.0:49154 0.0.0.0:0 LISTENING
TCP 0.0.0.0:49155 0.0.0.0:0 LISTENING
TCP 0.0.0.0:49156 0.0.0.0:0 LISTENING
TCP --------------------:139 0.0.0.0:0 LISTENING
TCP --------------------:8530 172.16.2.201:53317 ESTABLISHED
TCP --------------------:49362 23.65.244.185:443 ESTABLISHED
TCP --------------------:49363 23.65.244.185:443 ESTABLISHED
TCP --------------------:49367 23.65.244.185:443 ESTABLISHED
TCP --------------------:49377 23.65.244.185:443 ESTABLISHED
TCP --------------------:49414 131.253.34.141:443 ESTABLISHED
TCP --------------------:49416 216.239.32.20:80 ESTABLISHED
TCP --------------------:49417 216.239.32.20:80 ESTABLISHED
TCP --------------------:49418 173.194.70.113:80 ESTABLISHED
TCP --------------------:49419 173.194.70.113:80 ESTABLISHED
TCP --------------------:49420 65.52.103.78:80 ESTABLISHED
TCP --------------------:49421 65.52.103.78:80 ESTABLISHED
TCP --------------------:49424 88.221.93.31:80 ESTABLISHED
TCP --------------------:49425 88.221.93.30:80 ESTABLISHED
TCP --------------------:49426 88.221.93.30:80 ESTABLISHED
TCP --------------------:49427 88.221.93.31:80 ESTABLISHED
TCP --------------------:49428 88.221.93.31:80 ESTABLISHED
TCP --------------------:49429 88.221.93.31:80 ESTABLISHED
TCP --------------------:49430 88.221.93.30:80 ESTABLISHED
TCP --------------------:49431 88.221.93.30:80 ESTABLISHED
TCP --------------------:49432 88.221.93.31:80 ESTABLISHED
TCP --------------------:49433 88.221.93.31:80 ESTABLISHED
TCP --------------------:49434 88.221.93.30:80 ESTABLISHED
TCP --------------------:49435 88.221.93.31:80 ESTABLISHED
TCP --------------------:49436 88.221.93.30:80 ESTABLISHED
TCP --------------------:49437 88.221.93.30:80 ESTABLISHED
TCP --------------------:49438 88.221.93.30:80 ESTABLISHED
TCP --------------------:49439 88.221.93.30:80 ESTABLISHED
TCP --------------------:49440 88.221.93.31:80 ESTABLISHED
TCP --------------------:49441 88.221.93.30:80 ESTABLISHED
TCP --------------------:49442 88.221.93.30:80 ESTABLISHED
TCP --------------------:49443 88.221.93.54:80 ESTABLISHED
TCP --------------------:49444 88.221.93.54:80 ESTABLISHED
TCP --------------------:49445 88.221.93.63:80 ESTABLISHED
TCP --------------------:49446 88.221.93.63:80 ESTABLISHED
TCP --------------------:49447 88.221.93.63:80 ESTABLISHED
TCP --------------------:49448 88.221.93.63:80 ESTABLISHED
TCP --------------------:49449 88.221.93.63:80 ESTABLISHED
TCP --------------------:49450 88.221.93.31:80 ESTABLISHED
TCP --------------------:49451 88.221.93.31:80 ESTABLISHED
TCP --------------------:49453 88.221.93.30:80 ESTABLISHED
TCP --------------------:49456 65.55.58.184:80 ESTABLISHED
TCP --------------------:49457 65.55.58.184:80 ESTABLISHED
TCP --------------------:49460 131.253.34.142:80 ESTABLISHED
TCP --------------------:49461 131.253.34.142:80 ESTABLISHED
TCP --------------------:49462 65.52.103.78:80 ESTABLISHED
TCP --------------------:49463 65.52.103.78:80 ESTABLISHED
TCP --------------------:49464 63.251.85.33:80 ESTABLISHED
TCP --------------------:49466 131.253.40.50:80 ESTABLISHED
TCP --------------------:49467 131.253.40.50:80 ESTABLISHED -
Playing MMS Stream through Flash
Hello
i want to Playing MMS Stream through Flash , i have my own
server and streaming video / audio from it in the protcol MMS
as www.mysite.com:8080 and mms://www.mysite.com
how i playing the stream in the Flash ?? is this by action
script ?
thanksI am trying to do this also since WMP 11 no longer supprts
mms://. Is this possible? -
Generating transport stream for dectek card - testing purposes
Hi
I'm going to buy the recently released dectek card: DTA-110TSP in order to make MHP testing.
Before getting it I asked about the possibility to use this card in order to make mhp testing... they assured me it is possible, but that I have to provide in input a transport stream with my xlets embedded in it.
So, my question... How can I generate a transport stream and add my xlet in it in order to send it to the card? are there free software that allows this? or low cost softwares?
thanks for any help
Ignaziohi mr halil
your question is not completely clear to me.
if your question is: is this justdvb-it carousel software good enough to run 24x7 on a broadcaster network, i'm going to say a sound yes: we have plenty of regional broadcasters in italy using this server for interactive tv
if your question is: will i be able to configure properly the justdvb-it config files and a linux box so as to put in place a reliable system for my broadcast.. the answer is: this is just a matter of skills and knowledge.. (both on dvb/mhp and linux OS)
this is exactly the "value add" we give to our customers.. anyway, it's a long story, and an off topic one. so if you want, contact me to my email address [email protected]
bye
andrea venturi -
MPEG-2 Video, .m2v, Transport-Streams
I have searched through all of the Forum but still no solution.
Like many people here I have QT PRO (on Leopard) and the MPEG-2 Playback Codec (Version 6.4.1) installed. When I record from TV via Cable or DVB-T I always get a MPEG-2 Transport Stream. I know how to handle these and I know how to convert them. My question is regarding the Finder Preview Issue.
When you have selected in Finder to show the Preview of a file it will go for a long cup of coffee when it comes to selecting a .m2v or MPEG Transport Stream file, i.e. the Finder crashes. This is a phenomina since QT 7. Apple promised a better handling of .m2v for the 10.3.9 Update but I cannot see any changes.
I don't need to preview those files if it is not supported. This would be nice to have but I don't really need to. Is there anyone out there who can tell me how to
1) prevent Finder Preview from crashing or
2) get this to work
I tried some hints from here like re-associating .m2v with the Quicktime Player but it didn't resolve my Issue. Is there maybe someone from Apple reading this and being able to help out?
Many thanks in advance.Like many people here I have QT PRO (on Leopard) and the MPEG-2 Playback Codec (Version 6.4.1) installed. When I record from TV via Cable or DVB-T I always get a MPEG-2 Transport Stream.
I may be wrong, but I don't believe "true" transport streams have ever been supported by the QT MPEG-2 Playback component and, by extension, would not be supported by either the Finder Preview or QuickLooK.
When you have selected in Finder to show the Preview of a file it will go for a long cup of coffee when it comes to selecting a .m2v or MPEG Transport Stream file, i.e. the Finder crashes.
M2V/AIFF elementary stream files, "muxed" MPEG (MPEG2/MP2 or MPEG2/MP1), and MOV (MPEG2/any compatible audio) all play fine for me in both the Finder Preview and QuickLook. The only problem are VOBs whose video content play fine in the QT Player but have to have their extension changed to MPEG to play in either the Finder Preview or QuickLook. Frankly, I am unable to duplicate your problem except for "true" MPEG-2 Transport Streams, which, as I previously said I don't believe have ever been QT compatible. -
Trying to make MPEG2 HD 422 Transport stream at constant bit rate
I am trying to make a Compressor Preset to make MPEG2 HD 422 Transport stream 1920x1080i with a Constant Bit Rate of 15 Mbps and Open GOP structure . but when I select MPEG transport stream I can't make it a Constant Bit Rate and the GOP structure is set to Closed and "Grayed Out"
I am making files for our Playout Server and this is the specs requested by the manufacturer.
Is there a way to make this setting or do I just need to go to Adobe Media Encoder?K47MU-D wrote:
Is there a way to make this setting or do I just need to go to Adobe Media Encoder?
Media Encoder is a very good choice for what you need to do.
Other than bit rate, Compressor offers very little in the way of adjustments to their presets for program streams and transport stream.
Good luck.
Russ -
CS5.5 will not export MPEG2 Transport stream with mpg extension?
I am creating video for the local cable access channel. I have been using the MPEG2 NTSC DV High Quality preset. That preset outputs MPEG layer 2 audio. The cable access coordinator says that those files will not play audio from the Soloist media server, even though the specs for that server calls for MPEG layer 2 audio. Those files play ok in Windows Media Player. When analyzed with AVIcodec, GSpot, and VideoInspector, they all show there is MPEG layer 2 audio. The server shows no audio at all in one of it's reports.
I had previously been using an older version of Final Cut Pro and Compressor. I no longer have access to that computer but I believe I had been exporting a Program Stream. The access channel's documentation calls for Transport Stream. When exporting Transport Stream MuliplexingMPEG2 video in CS5.5 Media Encoder, the output file has the .m2t extension. These 3 codec analyzers aren't recognizing this as MPEG2. I assume that the video server will not recognize this m2t file extension at all. Final Cut's compressor did output the Program Stream MPEG2 with the mpg extension.
Is there a way to export Transport Stream MPEG2 video with MPEG layer 1 audio and have an .mpg file extension on the resulting file?
Also, anyone familiar enough with PID values to know if that could have any bearing on why the MPEG layer 2 audio is not being detected in that video server when I use the MPEG2 NTSC High Quality presets?
Thanks for any help.Jeff,
I am still waiting to here back from the access channel coordinator to see if the test file encoded this way would be recognized and play correctly. The files can only be tested when the server is off-line so it takes awhile for a response. Thanks for your help. I'll post when I get word of that file status. -
How to Import a MPEG-3-ts (Transport Stream) into Final Cut Pro ?
Hello All;
I just bought Final Cut Studio and I am trying to figure out how to import some video footage that I captured using ArcSoft's totalMedia software via a HD HomeRun High Definition TV decoder. I have verified that the video is being saved in MPEG-2 Transport Stream format but I've tried everything but still can't import it into Final Cut Pro. I've purchased the MPEG 2 Quicktime component but then realized that it doesn't work with Transport Streams. Then I downloaded MPEG StreamClip for Mac which does play the clips on a Mac but I need to obtain the codec so I can import them into Final Cut Pro. Any ideas would be hugely appreciated. Thanks. TimI do:
"You need to use MPEG Streamclip to convert the files to an editable format, such as those found in Final Cut Pro's Easy Setup menu.
For HD, your best choice is ProRes, DVCPro HD or Apple Intermediate Codec."
And so does Nick. -
Exporting to MPEG 2 HD with Transport Stream, 1920x1080
Hi,
I am trying to export a Pr project to the following requested settings: MPEG 2 HD with Transport Stream, 1920x1080. From the Format I selected MPEG2. I also adjusted the frame under the video tab to 1920. However, I have a feeling that something is not right. Please help.Hi Colin,
Is MPEG2 a HD setting?
Thanks,
Sam -
How do I change this?
This usually means that the input transport stream still has some settings o Check the alarm status of the input TS. Here you will see the reason why the TS still exists o Check that all input TS settings are set to the “default” value : to do this double click on the Gbe input TS and check all tabs : Services, TS FEC, TS Settings, TS Loss, TS Backup and make sure “default” settings are applied everywhere o Check that nothing is groomed anymore from the TS. From V5.1 onwards it is possible to right-click an input service and do a “Find Destinations” on it, … When all settings are reset to “default” values and nothing is groomed anymore from the TS, the TS should disappear completely after a maximum of 2 minutes
-
No audio when compressing .mov to Mpeg transport stream (m2t)
Since reinstalling OSX and FCS2 I don't get audio when I compress a quicktime movie to mpeg transport stream, used to be able to do it. I'm playinh the m2t in mpeg streamclip and assume it will handle audio, settings in compressor look ok, (48K 16 bit) although the button for multiplexed mpeg i/layer 2 audio is greyed out and unticked !?
Answering my own query here, but in case it helps someone else ... there appears to have been sound all along, at least since I ticked the mpeg audio box on the extra tab. When the file is playing in mpegstreamclip you have to work the volume fader down and up again at which point the sound comes on (yes it was faded up initially)
Wierd one, its almost as though there was a faulty physical fader rather than a virtual one. -
Can't render muxed MPEG2 with transport stream selected
I'm trying to render an MPEG2 that has the audio integrated with the video (muxed). I was told to select the transport stream option, but when I do, Compressor shows the error icon-that little yellow triangle with the exclamation point. I don't know what it's trying to tell me is the problem. I tried rendering it anyway and of course the render failed.
I'm coming up on a deadline and stand to lose $2000. HELP!Thanks for the link but it doesn't really address my issue. It's very strange because I don't see any reason why Compressor ought to be failing in the render just because I've selected the transport stream option in the extras tab. I tried a render without that option selected just to see if Compressor was failing on all fronts, but an unmuxed version rendered successfully. I even tried copying my FCP sequence into a new timeline, nesting it and trying to render a .m2t file that way. But that didn't help either. Eventually I downloaded free software called MPEG Streamclip which allowed me to convert a DVD copy of my sequence into a muxed mpg.
-
MPEG-2 with audio but no transport stream?
We have a Leightronix Nexus, which is a new whizbang digital video playback device for cable studios. It supports transfer of MPEG-2 files, but thus far I haven't been able to make a compatible MPEG-2 file with Compressor. Leightronix only does Windows so they've been of no help.
Here are the requirements as listed in the Nexus manual:
-MPEG-2 Program Stream, consisting of a single elementary video stream with an optional single elementary audio stream. In big letters it says "Transport stream is not possible."
The other specs seem fine; I think it's the lack of a transport stream that fouls it up. Compressor, in the audio checkbox, says "Select this to create an MPEG-2 Transport stream with multiplexed audio."
Is there a way to get audio into an MPEG-2 file without using a transport stream? If Compressor can't do this, are there any other (hopefully inexpensive) tools that can?
One interesting thing is if I copy one of the mpeg-2 files created on the Nexus itself (by having it digitize video), it plays quite fine in Quicktime Player.
Any help is appreciated. Thanks.Or, you can just use a freeware tool like MPEG Streamclip to combine Compressor's elementary .m2v output with its .AIFF audio and produce a multiplexed program stream. The $10 MPEG2 Works shareware app will also do the same (along with several other operations).
-
HD Transport stream to SD dvd compliant m2v?
What's the best way to take a high def transport stream (.ts) and convert it to an m2v I can use in dvdsp?
Thanks in advance for any help!
JasonThere is no single setting that will give the "best" results under every possible situation. However, you might want to try 2-pass VBR or a GOP structure of IP with a smaller GOP size. If you try the latter you might also need to increase the target or average data rate by at least several tenths of a Mbps.
Something like the following:
Average data rate: 6.7 (Mbps)
2 Pass VBR enabled
Maximum data rate: 8.4 (Mbps)
High quality
Best motion estimation
Closed GOP Size: 6, Structure: IP
Maybe you are looking for
-
How do I make changes to an external drive connected to my Mac mini from my Windows 7 PC
I have an external drive which I learned had to be FAT32 for the read write option to be set in the Mac Mini. I did that and moved all the media files back on the external HDD. On the Mac Mini, I shared the 4 folders I needed (Ebooks, Movies, TV Sh
-
Translation from CS5 to Cloud doesn't work correct, navi and linked images are broken.
Translation from CS5 to Cloud doesn't work correct, <navi> and linked images are broken. The data of CS5 was created at another PC. I installed Cloud version into two different PC. One has had the site data since dreamweaver CS5 and it works correct
-
I set all audio gain too low - any way to up it for an entire project quickly?
I have been working on a project and have been setting the audio gain levels a little too low during edit. It's a lengthy project and I wondered if there was an easy way to en mass up all the gain levels at once. The Matser mixer slider is already hi
-
Oracle 8i Enterprise Edition Rel 2 (8.1.6) Installation on Windows2000
I tried to install Oracle 8i Enterprise Edition Rel 2 (8.1.6) on Windows 2000 Professional on Dell Desktop Pentium 4 (1.4GHz) with RDRAM. After inserting the CD the Autorun screen comes up but when I click on 'Install/Deinstall Product' button, the n
-
ITSM-SLA -How to manage table CRMV_SRQM_DATSTA
Dears, I have some question about table CRMV_SRQM_DATSTA: 1) according to the configuration guide of ITSM or SLA, Oss Note 1674375 should have a list of records to be added or deleted , but as I can see there is only one pdf attached with only a lis