Asian text on 30" display

Does anyone have suggestions for improving the clarity of asian text on a 30" display? I find that unless I drastically enlarge the font size, some of the strokes are blurred and unrecognizable.

Back up all data.
Launch the Font Book application and validate all fonts. You must select the fonts in order to validate them. See the built-in help and the support article linked below for instructions. If Font Book finds any issues, resolve them, then boot in safe mode* (by holding down the shift key at the startup chime) to rebuild the font caches. Boot again as usual and test.
Mac 101: Font Book
*Note: If FileVault is enabled under Mac OS X 10.7 or later, you can’t boot in safe mode. In that case, after running Font Book, launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Terminal in the page that opens.
Drag or copy — do not type — the following line into the Terminal window, then press return:
sudo atsutil databases -remove
You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. After running the command, reboot as usual.

Similar Messages

Asian Text options on Photoshop CC

Hello!
Well, I was working with japanese text on Photoshop CC and when I was going into its formatation, I wasn't able to do the specific asian options because they do not appear. I already enabled them as I saw on the site once, and it worked fine while I was using Photoshop CS6. (by specific options I mean mojikumi/kinsoku)
Any tips how to solve this?
Thank you in advance!

The first thing to check is Preferences > Type and mark "East Asian Text Engine" and restart Photoshop.
Then in Photoshop's Type menu > Language Options > check East Asian Features There you should see your Kinsoku/Mojikumi options and other East Asian selections in the Character and Paragraph Panel Menus.
I'll guess you have suitable Japanese fonts and an IME　It should then work as in this example with the Vertical Type Tool.
It's been a while since I played with Japanese text, but this should get you in the right direction.
Another great thing about CC 2014 is that you can install a Japanese Language pack and change your User Interface to Japanese in the Interface Preferences at no extra charge.
I hope that helps you.

I need to read data from a text file and display it in a datagrid.how can this be done..please help

hey ppl
i have a datagrid in my form.i need to read input(fields..sort of a database) from a text file and display its contents in the datagrid.
how can this be done.. and also after every few seconds reading event should be re executed.. and that the contents of the datagrid will keep changing as per the changes in the file...
please help as this is urgent and important.. if possible please provide me with an example code as i am completely new to flex...
thanks.....

It's not possible to read from a file without using classes from the core API*. You'll have to get clarification from your instructor as to which classes are and are not allowed.
[http://java.sun.com/docs/books/tutorial/essential/io/]
*Unless you write a bunch of JNI code to replicate what the java.io classes are doing.

I bought a GoFlex desktop external hard drive and when I attached to my old mac toer and transfered all my files they are all in asian text? It took all weekend to tranfer and when I attached it to my new mini allthe transfered files are in asian ... what

I bought a GoFlex desktop external hard drive and when I attached to my old mac and transfered all my files they are all in asian text? It took all weekend to transfer and when I attached it to my new mini all the transfered files are in asian ... what can I do to change them into English?

What kind of files are these?
Are the Filenames in asian also?
Can you paste some of the asian here so we can have a better guess at what's going on?

In PO print text is not displaying?

Hi all,
IN PO printout text which i maintained in PO item text is not displaying, how to enable the same?
regards,
Sanjana

You have to make changes in the print program to pick the same.
Texts are not stored in any table directly. They are stored in STXH Header texts and STXL Item texts in an encrypted formats. You have to use Function module FM READ_TEXT to read the same.
Please contact your programmer.

G/L Account Long Text Field in Display

Dear Sir,
I want G/L Account long text field be displayed along with G/L account number in G/L Account line item display report (FBL3N)
I cheched the layout, the option of G/L account number is available but option of G/L account Long text is not available.
Kindly guide me as to how can I do it?
Regards
Chirag Shah

You must do some development for it.
You can add additional field to FBL*N reports with using BTE exit.
First of all, if you don't use BTE before, you must create a product on FIBF.
Call FIBF transaction -> Settings -> Products -> ...of a customer
Create a new line,
Product: ZFI
Text: BTE Products for FI Exit
Product active: tick checks from activation.
Then you must call SE11 for structure RFPOS.
You must use append structure function for this structure and you can define ZFI_RFPOS append structure
Define 4 fields.
Component: KUNNR - Component type: KUNNR
Component: NAMED - Component type: NAME1
Component: LIFNR - Component type: LINFR
Component: NAMEK - Component type: NAME1
Then save and active your RFPOS structure.
After that, you must do same step for structure RFPOSX.
Then go to SE37 and copy from SAMPLE_INTERFACE_00001650 to ZFI_INTERFACE_00001650 FM.
After copy action, you must uncomment this line on ZFI_INTERFACE_00001650 FM's source code. It's very important;
E_POSTAB = I_POSTAB.
Then you should add some ABAP code for getting customer & vendor details.
I give you some examples, you can use it. (Next message on this thread, please check)
Then save and active FM.
Call FIBF transaction again.
FIBF -> Settings -> Process Modules -> ...of a customer
Define a new line.
Process: 00001650
Function Module: ZFI_INTERFACE_00001650
Product: ZFI
and this customizing.
Then you go to SE38 transaction.
start report RFPOSXEXTEND. After starting, a pop-up appears, you must click YES.
After those operations, you can see customer/vendor code and their names on FBL3N.
ABAP source example,
TABLES : bseg, kna1, lfa1.
IF sy-tcode = 'FBL3N'.
CLEAR: bseg.
SELECT SINGLE *
FROM bseg
WHERE bukrs = i_postab-bukrs
       AND belnr = i_postab-belnr
       AND gjahr = i_postab-gjahr
       AND koart = 'K'.
IF sy-subrc EQ 0.
    e_postab-lifnr = bseg-lifnr.
    CLEAR: lfa1.
    SELECT SINGLE *
    FROM lfa1
    WHERE lifnr = bseg-lifnr.
    IF sy-subrc EQ 0.
      e_postab-namek = lfa1-name1.
    ENDIF.
ENDIF.
CLEAR : bseg.
SELECT SINGLE *
FROM bseg
WHERE bukrs = i_postab-bukrs
       AND belnr = i_postab-belnr
       AND gjahr = i_postab-gjahr
       AND koart = 'D'.
IF sy-subrc EQ 0.
    e_postab-kunnr = bseg-kunnr.
    CLEAR: kna1.
    SELECT SINGLE *
    FROM kna1
    WHERE kunnr = bseg-kunnr.
    IF sy-subrc EQ 0.
      e_postab-named = kna1-name1.
    ENDIF.
ENDIF.
ENDIF.

[SOLVED] Some colored text in urxvt displaying oddly

Some colored text does not display correctly in the terminal - but not all. Here's a screenshot:
http://i.imgur.com/xrzCR16l.png
As you can see, the directory names displayed in blue and the executable files displayed in green (not sure why .vimrc is executable..) are all funky looking. However, my username and the regular file names are all displaying correctly. Also all the colored text in VIm in the terminal looks fine as well:
I've read through the Font Config Wiki - Applications Without Fontconfig Support but none of the configs suggested:
Xft.autohint: 0
Xft.lcdfilter: lcddefault
Xft.hintstyle: hintfull
Xft.hinting: 1
Xft.antialias: 1
Xft.rgba: rgb
in my .Xresources file change this behavior. Here is my full .Xresources file without the above settings, its not very long:
! special
*.foreground: #e9ebee
!#93a1a1
*.background: #002b36
*.cursorColor: #93a1a1
! black
*.color0: #002b36
*.color8: #657b83
! red
*.color1: #dc322f
*.color9: #dc322f
! green
*.color2: #859900
*.color10: #859900
! yellow
*.color3: #b58900
*.color11: #b58900
! blue
*.color4: #268bd2
*.color12: #268bd2
! magenta
*.color5: #6c71c4
*.color13: #6c71c4
! cyan
*.color6: #2aa198
*.color14: #2aa198
! white
*.color7: #93a1a1
*.color15: #fdf6e3
URxvt*.transparent: true
URxvt.shading: 100
!URxvt.font: xft:DejaVu Sans Mono:pixelsize==14:antialias=false
urxvt*font: xft:DejaVu Sans Mono:style=Book:antialias=false:size=9, \
xft:WenQuanYi Bitmap Song:size=8, \
xft:FreeSerif:style=Regular, \
xft:unifont:style=Medium:antialias=false
urxvt.scrollBar: false
I would have thought that it has something to do with the colors being defined incorrectly, but the ".vimrc" file is using the same color as my username, and my username is behaving correctly. I'm at a loss and attempting to google "Font Problems in urxvt" gets topics where the the font is incorrect throughout the whole terminal, not just in particular places. Anyone know how to correct this?
-- mod edit: read the Forum Etiquette and only post thumbnails http://wiki.archlinux.org/index.php/For … s_and_Code [jwr] --
Last edited by woodape (2015-04-16 18:36:08)

Try defining your bold font explicitly:
URxvt.boldFont: blah

Cp5 - Text Entry Box - Fill Alpha =0 Text doesn't display

In previous versions I was able to select a trans background for text entry boxes. They've created a Fill and Stroke option where I can select Fill Alpha=0 (tranparent) but when I select that, the text doesn't display in the text box when I type, as it did in the previous version. When I go to the style editor, the preview displays correctly. My text colour is black and the image is white.
Thoughts?
M-

It is aknown bug that they are working on. Alas.

Problem in Displaying Subtotal text in Grid Display

Hi Experts,
             I got a problem in passing the Subtotal text and Total Text in Grid Display.In my Case we are calculating Interest Rate for Document Number for Each Assignment Number. If any discount is maintain for document, calculate the interest rate as per the given formula.
           So, in this case, Instead of Subtotal text, we can view the 2 dots in Grid display. But in the place of that or else, i want to display the Subtotal. But this not happen in case of Grid Display, I tried in List Display, i can able to display the text.
Here is the Code what i maintain.
wa_sortcat-fieldname = 'ZUONR'.
wa_sortcat-tabname   = 'IT_FINAL'.
wa_sortcat-subtot    = c_x.
APPEND wa_sortcat TO sortcat.
wa_sortcat-fieldname = 'BUDAT'.
wa_sortcat-tabname   = 'IT_FINAL'.
APPEND wa_sortcat TO sortcat.
wa_sortcat-fieldname = 'INTER'.         "Interest Rate
wa_sortcat-subtot    = c_x.
wa_sortcat-tabname   = 'IT_FINAL'.
APPEND wa_sortcat TO sortcat.
Fieldcatalog:
    wa_fieldcat-outputlen    = c_15.   " Interest Rate
    wa_fieldcat-do_sum       = c_x.
Layout:
alv_layout-colwidth_optimize = c_x.
alv_layout-zebra                    = c_x.
alv_layout-subtotals_text       = 'Subtotal'.
alv_layout-totals_text              = 'Total'.
I check in the SDN, But in some Threads, They explain as, We cant display the Subtotal text in Grid display.
Please help me to sort this issue. And clarify this whether this is possible or not.
Thanks in Advance.
Srini

Hi Naresh,
    Thanks for your reply, I added the given code by you to fieldcatalog for Interest rate field. i.e.
    wa_fieldcat-outputlen    = c_15.
    wa_fieldcat-do_sum       = c_x.
    wa_fieldcat-inttype      = 'I'.
Is this is a correct process what you are thinking, or i had to declare for every field what i declare under fieldcatalog.
Regards,
Srini

When I receive text messages, it displays phone number instead of contact name.

I updated to iOS 5 on my iPhone 4 over the weekend. Since updating to iOS 5, all of my text messages show up with a phone number listed instead of the contacts name. I checked my contact info and all the contact information is listed and the numbers under the contact are correct. Has anyone else had this issue and if so have you discovered any resolutions?

Following a tip from another poster, I was able to fix the issue (temporarily).
This worked for me on Verizon.
I dialed *228 on my Verizon phone. I pressed "1" to activate it over the air. I then went into task manager and killed all the running apps.. Waited a few minutes.
The next text I got displayed the number correctly!.. Until I rebooted, that is.
Ps. PLEASE, call Apple and speak with a senior engineer on this. They can't fix it if they don't know it's a problem! (800) MY-IPHONE

Text doesn't display in flash

my flash movies work fine on every computer i have tested
(about 10 both macs and pc's) but i have found one where the flash
movies play (images and animation appear fine) but the text (static
text) doesn't display at all! there is also no streaming video. the
audio works just fine but the video is not there. is this an
internet options configuration problem with this one machine or is
this a bigger problem that is going to bite me in the butt when i
launch my site.
also- do any of you know of any beta testing services that
will test my site on lots of different machines with different
configurations so that i can feel confident that my site is robust
enough for a lot of users?
thank you

Hey, yall - I'm having the same problem. Anybody got
anything???
The text - even static/non-animating text - is not appearing
on some peoples browsers. Not only that, but it also doesn't appear
in my client's Contribute program - f'in' wierd!
http://christina-ammon.com/index.html

Cpt 5 - Quiz Answer Text Doesn't Display

Situation: I've created a course with mutliple lessons. At the end of each lesson I use quiz pages to ask knowledge recall questions. These are scored but given a value of 0 points.
At the end of the course, I have a quiz that is scored.
Problem: On my machine, the quiz functions as it should. When I have collegues test it, the quiz answer text does not display. The check boxes and the letters display. Clicking a check box works but when CheckIT (the submit button) is clicked it provides the feedback that an answer must be given.
This page has a video on it, others do not with the same display.
I thought it might be a font issue, but when I changed it to Arial, not change. Also, why would the font affect the fucntionality (i.e., clicking a checkbox not work)?
Any thoughts?
Thanks, in advance, for any help.
Michael

Looks like you may have removed some of the standard elements that are required for a quiz question to function. I suggest you insert a new quiz question and this time don't remove any of the standard captions or the review area.

Text variable placeholder display

Not too many people will be familiar with both Mac and Windows incarnations of CS3, so this might not be a known issue (then again, I just might have missed previous discussions). Placeholders for Text variables are displayed on master pages as "<Name of variable>" on my Windows machine. If I open that same file on any one of our Macs, they are displayed as "" -- that's right, a tiny tiny dotted rectangle, with no recognizable text. Is that just all of our Macs (4 of them), or is the Mac community missing out on this rather important hint? If the latter, do they care? ;-)

Sorry, Haeme, it's not i literally a ""-thingy. Sometimes I forget not everyone is a programmer -- it's an empty string, zero characters. With invisiblies on I can see a thin, tall, blue dotted rectangle. (walking 'round to a random Mac:) Just (double) checked. It has nothing to do with Windows files, an entirely new file does the same. Some further details: it only happens with Running Headers, which kinda makes sense, as the other types immediately display a value (Filename, Output Date, and the like). But I'd think that's what the <Placeholder> was for; to see i something there. If I just could remember how to make a screen shot on OSX (wait, I got it ...) <img src="http://www.jongware.com/binaries/weirdvariable.png" />

Last text block not displaying correctly after XML import.

Hi,
I have an .indd template (CS6) and script which imports XML and flows it into as many pages as it requires.
Occassionaly on the last page, the text doesn't display although it is all there and formatted correctly. Going in and out of preview mode doesn't change it.
If I click on the out port or resize the text box slightly, it displays and is fine from then on.
Any suggestions as to fixing it?
As always, many thanks in advance for any assistance.
Cheers,
Simon.

Hi Jeff,
Thanks for that. I get 'story is undefined' - how do I defined the story (autoflowed text)?
Sorry for the newbie question - vascilating between various projects at the moment.
Cheers,
Simon.

Lync 2013, text does not display in chat box. Windows 7 pc with dual monitors.

Has anyone experienced an issue with Lync 2013 where when someone sends a chat the text doesn't display in the chat box. Or on occasion when initiating a chat, the text typed in doesn't display? The person experiencing this
behavior has dual monitors and often times when she is working on a document - then goes to Lync and initiates a chat and types, the words do not display in the chat box. Her graphics drivers are current, (8.15.10.2869). At one point she was able to drag the
chat box over to the monitor on the left and then the text displayed. Since then she has received a brand new laptop, windows 7 and the Lync behavior continues but now her dragging the chat box to other monitor no longer resolve text display issue. Ideas?

Hi,
Did the issue happen if only use single monitor?
Please update to the latest version for Lync client 2013 and then test again.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Asian text on 30" display

Similar Messages

Maybe you are looking for