ASIO problems with M-Audio Mobile Pre

Hi, I am using Adobe Audition 3.0 with an M-Audio Mobile Pre interface.
I know this interface supports ASIO. However, it doesnt register as an ASIO when working with Audition. Hence I am getting some serious latency issues when working with Audition.
How can I fix this?
Thanks

The Mobile Pre works well with Audition when using the ASIO driver from m-audio.com. Unfortunately, I don't think they've released a Vista comaptible ASIO driver, and last time I checked, they didn't intend to. If you're using Windows Vista, you may need to use the ASIO4ALL driver if you want a little better performance then the default DirectSound wrapper provides. You can find this at www.asio4all.com.
Durin

Similar Messages

Please help with m-audio mobile pre driver not connecting with garageband08

hey i just updated my powerbook G4 with leopard and lost my m-audio (mobile pre) driver in system preferences so i downloaded it b/c i don't have my original disc, the downloaded version shows in my system preferences now but won't appear in the garageband preferences audio/midi input, my only choices are built in mono/sterio. any ideas? besides finding the disc? i'd really appreciate any help as my band is trying to record a cd.

Yeah, the Mobile Pre is not going to work on Leopard until M-Audio updates their drivers, unfortunately.
There is one workaround that I've gotten to work, but it probably won't work for most folks. If you have two partitions on your system, one with Leopard and one with Tiger, you can get the mobile pre to work in Leopard. It's a bit odd, but it does work.
First, boot into you Tiger partition that has the Mobile Pre drivers installed and verify that the system sees and can use the Mobile Pre.
Now, boot into Leopard. Your Leopard system should now see the Mobile Pre and you should be able to use it until you have to reboot the Leopard system.
If you have an external HD with Tiger installed, you might also be able to get this to work w/out having to repartition your system. Just install Tiger on the external HD, boot from it, then install the Mobile Pre drivers.
Hope this helps and possibly provides some temporary relief until M-Audio updates their drivers....

Cannot record with M-Audio "Mobile Pre"?

Just updated to GB 10.0.3 and OS 10.10.1 Now I cannot record tracks using M-Audio "Mobile Pre" USB pre amp interface as I used to. The Pre works fine with Audacity as in the past. Is there a fix for this in Garage Band by any chance? Thanks for any advice.

Did you install the latest drivers?
http://avid.force.com/pkb/articles/en_US/download/MobilePre-Drivers

Funny latency with M-Audio Mobile Pre USB

Hi,
I'm using an M-Audio MobilePre USB interface with Garageband, and I'm 99% certain that GB is doing something funny with latency. I'll record a clip, finish recording, and it'll do some funny compensation where it assumes that there is latency there where there is none, so it shifts the clip left by a few milliseconds (enough to sound sloppy). In every case where I record from the Mobile Pre USB, I find that if I shift the clip right by a few ticks, it'll sound like it did when I was recording it. Is this a known issue, and, if so, is there any way to calibrate it? Otherwise I'm left manually adjusting clips.
Thanks!

Hi there,
As you can see I believe I am having a similar problem except I am using a Fastrack Pro. Hopefully you will get a response that may also help me.
Gord9332
Hi there,
I am new to Mac so bear with me. I have just purchased a Macbook Pro with Logic Express 9. I also purchased an M-Audio Fast Track Pro to connect my instruments. But I have a problem. I can't seem to record anything through the M-audio interface. I ran a test and can record using the internal microphone (which I then turned off).
I have loaded the drivers and the O/S sees it. I check in Logic Express 9 and it sees the interface. In the Mac system preferences it sees the M-Audio USB line input but when you highlight the line it says "the selected device has no input controls". In the Logic Express preferences the Logic software sees the M-Audio device.
Would appreciate any suggestions as to why this is happening. Suspect I am just missing a setting or two.
Macbook Pro Mac OS X (10.6)

M Audio Mobile Pre USB Problems!?

Hi again,
Short term until the upgrade is decided upon any help with the problems we're having with our M Audio mobile pre usb would be greatly appreciated.
First off if the charger is plugged into the ibook whilst the sound card is plugged into USB and a guitar is connected you get electric shocks from the guitar strings?!?! happens with a number of guitars! Stops happening if you unplug the charger and run off the battery!
Secondly.....and this doesn't happen all the time but probably about half the time there's lots of interference when recording.
Software we're using is garageband 2.
Part of me thinks there must be something really wrong as surely this isn't right even with a relatively cheap external box.
thanks all
Noel

Noel,
I think that's not normal at all.
My first move (if it's new) is: run to the shop and swap it! And test the new one!
If not, report it to the M-Audio assistence team.
Also, I'm assuming you have earth on your plugs.
Yeah, you gotta be 'right, cheap doesn't mean electric shocks, EVER!
...not even your toster. :o)
Hope you solve it quick.
Peace mate,
Jorge

I connect my mic with an M-audio mobile pre usb device. When I try to record, I can see that my voice is recording but can't hear it during playback.

I connect my mic with an M-audio mobile pre usb device. When I try to record, I can see that my voice is recording but can't hear it during playback. I tried different input and output settings but it didn't help. Any help will be appreciated.

Hear your microphone or instrument as you play and record (monitoring)
You can hear, or monitor, input from an instrument or microphone in GarageBand while you play and record. When you turn on monitoring for a track, you hear the musical instrument or microphone connected to the track’s input. Monitoring lets you hear yourself play so that you can hear the part you want to record as well as the rest of the project.
You can turn on monitoring for a Real Instrument track or Electric Guitartrack from the track’s header, or in the Track Info pane. Electric Guitar tracks always show their monitoring buttons, and you can show monitoring buttons for Real Instrument tracks using a menu command. You can use monitoring with feedback protection to avoid feedback while you play.
Hide
To turn on monitoring in the track header:
Choose Track > “Show Monitoring for Real Instrument Tracks.”Monitor buttons appear in the headers of Real Instrument tracks. On tracks with monitoring turned on, the button lights yellow.
Click the Monitor button in the header of the track you want to use.
HideTo turn on monitoring in the Track Info pane:
Double-click the header of the Real Instrument or Electric Guitar track you want to turn on monitoring for.The Track Info pane opens.
From the Monitor pop-up menu, choose one of the following:
Choose Off to turn off monitoring. You can hear your instrument only while you record.
Choose On to turn on monitoring and protect against feedback.
Choose On (no feedback protection) to turn on monitoring without feedback protection. If the input level is too high, it may cause feedback (especially if you are using a microphone and listening to your project through your computer speakers).
For an Electric Guitar track, you can view the Monitor pop-up menu by clicking Edit, and then clicking the back side of the amp. The Monitor pop-up menu appears with the input controls below the stage.
You should usually turn off monitoring when you are not playing or singing. When monitoring is turned on, your computer can pick up output from your speakers or monitors, causing unwanted feedback. Using headphones rather than speakers to listen to your projects can help eliminate feedback.
If you select your computer’s built-in microphone as the audio input, in the Audio/MIDI pane of GarageBand preferences, monitoring is turned off for all Electric Guitar tracks to avoid unwanted noise.
SEE ALSO
If you don’t hear sound from a Real Instrument
Was this page helpful?Send feedback.
© 2010 Apple Inc. All rights reserved.

M-Audio Mobile Pre USB audio interface compatibility w/ FCP

I am trying to do voiceovers in FCP with my mic connected to the XLR input on a M-Audio Mobile Pre USB audio interface.
The first time I did this, even though I got a signal in System Preferences audio input, I would get no signal in the Voiceover Tool window in FCP. I know I chose the correct source, input and rate for the device. I rebooted and it worked. Then on another day a reboot would not make it work. Now I can’t make it work again. Upon opening FCP with the USB interface connected OSX crashed. This almost never happens ether with the system in general or since I installed FCP 5.1. This has happened twice. I also started this whole process by updating to the newest driver for the M-Audio device. I liked the sound I got when it worked so any help with this problem would be appreciated.

Thanks for that link...that's what I saw months ago, and I realize I got a few of the specifics mixed up. UNFORTUNATELY, I tried those tips and I still have the exact same problem. I also went to M-Audio and downloaded the most recent driver. I did a variety of starts and re-starts where the unit was connected or not upon start up...whether phantom power was on or off at start up, etc etc. And by start up I mean both starting GB only, and/or starting up my Mac. I tested using the interface through both of the USB ports. All yield the same result. The only thing I didn't test yet is changing the USB cable itself.
Any more thoughts? You think the interface is bad?

No Playback sound, M-Audio Mobile Pre usb

Hi, I have searched and read alot of topics here, but I can't see any related to my Audiotion Issue.
I can record in Audition and I see the peak of my recording etc.
But when I hit play button to hear what I have recorded, No sound at all.
I use winxp, M-Audio Mobile pre USB soundcard.
I hear music when I try with media player etc, but not in Audition.
Any ideas?

I couldn’t record with Audition 3.0. I recorded using Audacity which came with the turntable. I saved the tracks as WAV. I updated my sound card software and now in Edit > Audio Hardware Setup I have Creative ASIO as an Audio Driver choice. I use that in Edit and now I can edit the tracks recorded in Audacity. I still can’t record or hear my LPs in Audition. So, I left Multi-Track and Surround Encoder with Audition 3.0 Windows Sound. The turntable is listed as Speakers (USB Audio Codec) 1 & 2. When I change Edit from Creative ASIO to Audition 3.0 Windows Sound the Default Input is Microphone (USB Audio Codec) and the Default Output is Speakers (USB Audio Codec). Using Audition 3.0 Windows Sound I can’t see or hear the LP music. When I change the Edit setting to Creative ASIO I can hear the music that I have recorded using Audacity. How do I fix it so that I can record in Audition? I have Audition 3.0. Is there an update for Audition?

M-Audio Mobile Pre USB technical issue

When recording through the M-Audio Mobile Pre USB interface, I get random "pops" added to my tracks. This happens no matter if I'm using mics, going in through the 1/4" jack, or going in through the stereo line-in. I believe an earlier thread (months ago, for which I searched unsuccessfully), suggested setting the appropriate audio in/out preferences and re-launching GB as a possible solution. I've tried this, and also restarting my computer after resetting prefs, but it doesn't solve the problem.
This didn't always happen, and I use my equipment carefully.
Any other ideas? I'm assuming it's a problem with the interface, not GB.

Thanks for that link...that's what I saw months ago, and I realize I got a few of the specifics mixed up. UNFORTUNATELY, I tried those tips and I still have the exact same problem. I also went to M-Audio and downloaded the most recent driver. I did a variety of starts and re-starts where the unit was connected or not upon start up...whether phantom power was on or off at start up, etc etc. And by start up I mean both starting GB only, and/or starting up my Mac. I tested using the interface through both of the USB ports. All yield the same result. The only thing I didn't test yet is changing the USB cable itself.
Any more thoughts? You think the interface is bad?

I just moved my itunes library from a win 7 computer to a win 8.1 computer. Getting an error message "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly. Can't play CDs or get audio file from web!

Help! I just moved my itunes library from a Win 7 computer to a new Win 8.1 computer following the instructions on the itunes website. Everything is good except I'm getting an error message on the Win 8 computer if I try to play a CD or get an audio file off of the internet. I get an error message that says "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly. I don't know where to look for or fix the audio configuration on the win 8 computer. As far as I can tell the iTunes configuration looks the same as on the other computers in the house. At this point I don't dare plug my ipod touch into the Win 8 computer for fear it will get messed up.

I have the same problem and I know that it is due to my PCI Audio driver not being compatible with WIndows 8.1.
iTunes isn't the only program that can't direct sound to the built-in speakers anymore. The obvious solution would be to update the drivers, but unfortunately Dell does not provide an updated driver for my model, so I am stuck with that.
However, saying that, only my laptop speakers are affected by this. I can use sound fine on applications where I can choose the output device and direct sound to the head phones, but for some reason iTunes does not let you choose the audio device manually.
To listen to music I imported the iTunes Library in Windows Media Player and changed the audio output using the following instructions: http://windows.microsoft.com/en-us/windows7/c00d11ba
However, I would also like to rent movie's from iTunes,
Would be great if iTunes would let you choose the output device, too, like most other applications using sound from Skype to Windows Media Player,...

Error message after upgrade to iTunes 11: "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly." At this point my PC running XP loses all audio.

Several attempts to upgrade to iTunes 11 have failed. After an upgrade to 11 the error message reads: "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly." At this point--after the upgrade to iTunes 11--my PC running Windows XP loses audio playback for all functions--in iTunes, in the browser and the volume icon disappears from the System Tray. Only by removing iTunes 11, and then using System Restore to turn back the OS settings can I return the PC to normal functioning.
I did that. I reinstalled iTunes 10.5. Everything seemed fine, but when I try to plug in and copy a CD to my iPhone 4S an error message reads roughly: 'iPhone 4S requires iTunes 10.5 or higher to work.'
What might be the problem with my audio configuration?
Why doesn't my iPhone 4S work with iTunes 10.5? It used to work with iTunes 10.5.
Please advise.
ep

This forum is for questions about iTunes U, Apple's service for colleges and universities to post educational material in the iTunes Store. You'll be most likely to get help with this issue if you ask in the general iTunes for Windows forums.
Regards.

When I connect my I pod shuffle to USB it shows an error message - " I Tunes has deducted a problem with your audio configuration. Audio/Video playback may not operate properly" due to this problem each and every earphone am inserting goes unusable

When I connect my I pod shuffle to USB it shows an error message - " I Tunes has deducted a problem with your audio configuration. Audio/Video playback may not operate properly" due to this problem whenever i connect earphone each and every earphone gets un usable. Already made a factory reset. please arrange for a rectification.. :'(

Hi Ganeshpandianm,
Welcome to the Support Communities!
The article below may be able to help you with this issue.
Click on the link to see more details and screenshots.
iTunes for Windows: iTunes cannot run because it detects an issue with QuickTime
http://support.apple.com/kb/TS1371?viewlocale=en_US
"iTunes cannot run because it has detected a problem with your audio configuration"
Cheers,
- Judy

Trying to get my fcp project to burn to dvd at the highest quality? Ive used compressor and then tried to put it in dvdsp put its not working. I am having problems with the audio or when i burn it , i cant play the dvd? any help would be appreciated

Ive used compressor and then tried to put it in dvdsp put its not working. I am having problems with the audio or when i burn it , i cant play the dvd? any help would be appreciated

I suspect you are attempting to burn an HD DVD, which will not play on a DVD player...
But if you provide more details such as the settings you are applying in Compressor, then we would be able to provide you more accurate information.
How are you adding the files to Compressor?
In FCP, what are your footage properties (command-9) and sequence settings (command-0)

TS1362 my iTunes wont play music or videos when i open it it comes up with "iTunes has detected a problem with your audio with your configuration AudioVideo playback may not operate properly"

my iTunes wont play music or videos when i open it it comes up with "iTunes has detected a problem with your audio with your configuration AudioVideo playback may not operate properly" i have uninstalled it and reinstalled it twice and it stil lcomes up with that message every time I opentheiTunes icon I dont knowwhat to do

Hello Wade,
This is typically indicative of an issue with the installation of QuickTime on your computer. The following article provides steps for reinstalling QuickTime to resolve the issue.
"iTunes cannot run because it has detected a problem with your audio configuration"
Resolution
QuickTime may need to be reinstalled. Follow the steps below to uninstall QuickTime and then download and install QuickTime using the QuickTime standalone Installer.
On the Start menu, click Control Panel.
Follow the steps appropriate for your Windows operating system below.
Windows XP and Windows 2000: Open the Add or Remove Programs control panel and selectQuickTime in the list of currently installed programs.
Windows Vista and Windows 7: Click Uninstall a program (or if using Windows Vista's Classic View of the Control Panel, click Programs and Features) and select QuickTime in the list of currently installed programs.
Click the Remove button (or Uninstall for Windows Vista and Windows 7) and follow the prompts to remove QuickTime from your computer.
Download QuickTime. Note: There are two options for downloading QuickTime, be sure to select the option that does not include iTunes.
During the download:
If you choose to run the installer, proceed to the next step.
If you choose to save the download, double click the QuickTimeInstaller file, then proceed to next step.
Follow the on-screen instructions to install QuickTime.
Reopen iTunes.
iTunes for Windows: iTunes cannot run because it detects an issue with QuickTime
http://support.apple.com/kb/TS1371
Cheers,
Allen

Itunes won't run because of some problem with my audio configuration? help!

it specifically says "itunes cannot run because it has detected a problem with your audio configuration". anybody know how to fix that. all i did was when my itunes was werking perfectly fine i was uploading some videos onto it but wen i did it was freezing so i did it again and it froze again so i deleted itunes and installed it again. thats when the problem happened. i tried installing quicktime again. that didn't work then i organized my music and video files but it still wouldn't work. my speakers work good. id on't know what the problem is. CAN ANYBODY HELP????!!!!

Perhaps this Apple KnowledgeBase article will help:
iTunes 7 for Windows: iTunes had detected an audio configuration problem
Good luck.
Forum Tip: Since you're new here, you've probably not discovered the Search feature available on every Discussions page, but next time, it might save you time (and everyone else from having to answer the same question multiple times) if you search a couple of ways for a topic, both in the relevant forums, in the User Tips Library and in the Apple Knowledge Base before you post a question.
Regards.

ASIO problems with M-Audio Mobile Pre

Similar Messages

Maybe you are looking for