Asiohost.cpp error

If anyone gets an error message about asiohost.cpp, check to see if you are disabling clips on the timeline. On previous versions of Premiere I used to assign the enable/disable feature to my H key (H for "Hide") so that I could hide individual clips on the timeline without having to hide the whole track. It still shows where the clip is on the timeline but it just lightens the color of the clip on the timeline and makes it so you can't see it when scrubbing or playing that area. Try getting rid of the disabled files or just reenable them, then save the project under a new name, close Premiere, and then reopen it.

Sounds like a possible audio card/driver issue. This is a general audio issue CHECKLIST, and I would look into the settings in Audio & Audio Hardware. If all looks good there, make sure to update your audio driver. If things are not fixed, I'd look into ASIO4All (linked in that article), and make the appropriate settings in Audio Hardware>Advanced>ASIO Settings.
Good luck,
Hunt
[Edit] For more discussion on ASIO, this Wiki-Pedia article might prove useful.

Similar Messages

Important! Error massage asiohost.cpp-709

Hello everybody
this is my probleme:
I use PrE 4 and its very good.
But since 2 days I can't play any video in PrE. I also can't switch on the timeline from one position to the other.
There is always following message:
"Premiere Elements has encountered an error.
[..\..\src\audio\asiohost.cpp-709] "
I dont know what to do!!!
Perhabs this is helpful:
This message is there since I activated and deaktived some clips. I uses this tool for the first time and since then nothing goes.
I hope you knwo what I mean and you can help me!!
Thanks a lot
PS: Sorry for my English. But I'm only 16 years old and I'm learning it in school.

That error indicates an ASIO issue.
The first thing that I would look into is what has changed, since you last were able to edit perfectly. Did you install any software, or hardware?
Next, I'd get the very latest Realtek Audio driver and install it. Even simple OS updates can kill these quickly. Many players will have no issue, but an NLE works a lot more closely, with both Audio and Video drivers, and can encounter problems. Note: if you have a Creative, or other Audio board/chip, go to their site for the latest update
Then, I'd check the ASIO settings in Edit>Preferences>Audio Hardware. Here is my ASIO settings for PrE 4 on my laptop:
Last, if nothing else is working, look at ASIO4All. Install it (freeware) and then in Edit>Preferences>Audio Hardware>ASIO Settings, point to it for Input & Output. This has allowed many to get their Audio working with all sorts of equipment, when nothing else worked. It's saved many on the Audition forum days of troubleshooting.
Good luck,
Hunt
PS - Welcome to the forum

Windows LV6.0 running on Linux Wine: config.cpp error (line 404)

Have anyone tried to run LabView (Windows version) under Linux using the Wine "emulator"?
Trying this on Debian Woody, with a Win98 install of LabView 6.0 returns:
config.cpp error (line 404)
I tried to search for such a file on both Win/Linux partitions: there's none.
So how am i gonna check this line 404?
Any clue would be strongly welcome!

I agree with Labviewguru about getting Labview for Linux. The only
problem is that you have to dish out $2000 or $3500. They don't have a
Base package.
I'm not sure if NI recomends a particular window manager but I do know it
will run on any of them. In an extreme case I used it on a PII 233MHz,
64MB ram, and a 300 MB disk. It was a Slackware distro using the fvwm2
window manager. Ran great. Presently I run it with Gnome.
My point is that if you have to buy a LV for Linux license, at least you
can save money buy putting it on a machine that's been used as a paper
weight for several years.
-kevin
In article <[email protected]>,
"Labviewguru" wrote:
> I don't believe you can run LabVIEW in an e
mulation environment. There
> is too much system control that LabVIEW needs a handle on to be able to
> run on an emulator.
>
> The reason you are not able to find and troubleshoot that file is
> because it is part of the source code for LabVIEW, and doesn't exist
> except in a super secret vault which may or may not be located in Austin
> Texas...
>
> Are you aware that there is a version of LabVIEW for Linux? I believe
> that they recommend running KDE or similar GUI, but check on the support
> website for that at ni.com/linux.
>
> I hope that was enough of a clue...

Labview 6.0.2 patch does not remove my "image.cpp" error

I have an industrial PC with the following characteristics:
* Sharp LQ10D367 10.4" TFT screen, running a VGA driver (16 colours only option)
* ROBO 608, Industrial SBC motherboard with onboard video driver, from Chips and Technologies, 69000; 2MB onboard video memory
The standard VGA driver is the most recent driver, and in fact the only one available for this hardware.
Labview 5.1 runs without problem on this machine, but when I loaded Labview 6 (with the 6.0.2 patch) it came up with an "image.cpp error, line 4150" every time I tried adding a graph to the front panel. Changing the screen acceleration properties did not make any difference.
Though I have gone back to version 5.1
for the time being, my application would benefit substantially from the current version.
Are there any fixes for this, or is Labview 6 simply not compatible with VGA screen drivers?
Thanks,
Jo

I have LV6.0.2 running on an Arcom SBC with the Chips and Technology 69000
HiQVideo 2MB display chip. This chip is not capable of rendering 3D graphics.
I have noticed the CPU will go to 100% usage if I open a sub-VI panel with lots
of the new 3D graphics on it, as the display chip passes rendering off to the
main processor.
Perhaps you could try replacing the LV6 3D graphics with the older versions
that are available on the Controls pallet. At 16 colors the new graphics look
terrible anyway.
I am running the chip at 1024 X 768 screen resolution and 65K colors with
no other problems.
Regards,
Alan Brause
"Jo" wrote in message news:[email protected]..
> I have an industrial PC with the following characteristics:
>
> * Sharp LQ10D367 10.4" TFT screen, running a VGA driver (16 colours
> only option)
>
> * ROBO 608, Industrial SBC motherboard with onboard video driver,
> from Chips and Technologies, 69000; 2MB onboard video memory
>
> The standard VGA driver is the most recent driver, and in fact the
> only one available for this hardware.
>
> Labview 5.1 runs without problem on this machine, but when I loaded
> Labview 6 (with the 6.0.2 patch) it came up with an "image.cpp error,
> line 4150" every time I tried adding a graph to the front panel.
> Changing the screen acceleration properties did not make any
> difference.
>
> Though I have gone back to version 5.1 for the time being, my
> application would benefit substantially from the current version.
>
> Are there any fixes for this, or is Labview 6 simply not compatible
> with VGA screen drivers?
>
> Thanks,
> Jo

Failure: "image.cpp", error 11602

I'm developing an application in LabView and with the Web publishing tool I can visualizethe results in Internet. The problem is that I open the explorer (Netscape or Internet Explorer) the following message appears in the screen: "Failure, "image.cpp", error 11602, please contact with NI" and the explorer is close... It's labview 6.1

eddie wrote:
>
> I'm developing an application in LabView and with the Web publishing
> tool I can visualizethe results in Internet. The problem is that I
> open the explorer (Netscape or Internet Explorer) the following
> message appears in the screen: "Failure, "image.cpp", error 11602,
> please contact with NI" and the explorer is close... It's labview 6.1
A good general starting point is www.ni.com/failure . Worth looking at
the specific tips (if any) for this error, and the general tips.
Mark

Getting CURL.cpp - Error?

Hi,
I updated to Mountain Lion and when using a audio converter, Sound Grinder 3.4.4, I get an error that reads as follows:
CURL.cpp - error "No URL" when getting Full Path, in getFolderFullPathAs CString0, line: 248
Can't find any thing regarding it so if someone can enlighten me of what this is and if there is a way to fix it I would appreciate it.
Thanks!

Funny I posted this and bang I figured it out. Seems Apple is getting as bad as PC's with their convoluted errors that make zero sense. Basically Sound Grinder's path to save a file, which was set in the preferences, was deleted by the new install. So once I told it where to save it was fine.
Thanks for the quick reply by the way!

Image.cpp error

When I try to print the labview panel & diagram on my new canpn pixma iP1000 printer I get the following message. I am using LV6.0
"image.cpp error" in line 11035. Please contact ni.com. Anyone can help!

hi labview 1958,
please look here:
Failure: image.cpp, line 11035 in LabVIEW 6.0
Greets!

Fpsane.cpp error

Hello,
Following an fpsane.cpp error, all open vi's crash and when they are reloaded they are temporarily reloaded in mandarin chinese. After a minute or so the language reverts back to english. Has anyone ever seen an error like this before?
Thanks,
Chase
Test Engineer - Subzero Freezer

1984 is most likely correct about the corrupt files. The fpsane.cpp error usually indicates something has become "very corrupted" as listed in the explanation of the error:
http://digital.ni.com/public.nsf/allkb/AFA28DCC3DE89839862566B200594E8C
Have you located the origin of the error?
Applications Engineer
National Instruments

CPP error line 638

Hi I'm having problems with the CPP ERROR at line 638, my application includes profibus and vision. In the past when I had CPP ERRORS I had found if I sequenced the profibus VI this would eliminate the problem, however the problem has returned. I thought maybe it would be the IMAQ for the vision, so I bypassed the vision altogether, it is still in the code but not currently called or used. This hasn't helped either, I was wondering if the issue could be with too many VI's running at the same time, perhaps a memory allocation problem, but I don't know at this point.
This has been most frustrating I'm running out of I deals
Thanks
Jeffery Orn

Hello Colorado,
Normally when you are starting up LabVIEW after a crash or another error happens, LabVIEW will give you the cpp file name and the line number. You then have the option to investigate the error. This will send a report to NI so that we can work on finding why the error happens and what we can do to fix it. You should probably send that error to NI if you have not done so already.
Since the cpp file and the version of LabVIEW is missing from you post, you may want to include it. It would probably be helpful to others who may have run into this error.
I hope this helps.
Steven T.

I am gettign objheap.cpp error

i had a cluster ( pretty large one ), i added few more controls to the cluster. when i tried to open the main vi where this custer is a contol in the FP, further the cluster is used for processing(updating , reading etc)in the code.
When i try to open the main vi with the modified cluster i get objheap.cpp error and the labview closes by itself when i press ok. What could be the reason for this problem.
Is there any precaution i need ahere to when working with large clusters.

Did you get a line number? That would go a long way to finding the reason for the error.
I believe that your VI has become corrupted due to the number of controls on your front panel. Not counting the controls in the clusters, how many objects do you have?
The following link points to another link that discusses the interal errors of LabVIEW. It might help.
http://exchange.ni.com/servlet/ProcessRequest?RHIVEID=101&RNAME=ViewQuestion&HOID=50650000000800000007510000&ECategory=LabVIEW.Datalogging+and+Supervisory+Control

How do I stop .cpp errors on opening firefox

when I open firefox I get a series of message boxes as follows:
353 regWithoutKeyname.cpp
49 dfxpRecord.cpp
234 dfxpInit.cpp
65 dfxpUniversal.cpp
86 winmmDfx.cpp
The number is the title of the box and the text is the file name. An OK button appears in each box and once pressed the next box appears.
How do I stop this from occurring ?

'''How to stop Firefox startup .cpp error dialog windows''':
* 353 ..\..\UTIL\reg\regWithoutKeyname.cpp
* 49 .\dfxp\dfxpRecord.cpp
* 234 .\dfxp\dfxpInit.cpp
* 65 \dfxp\dfxpUniversal.cpp
* 86 .\winmmDfx.cpp
'''It has nothing to do really with Firefox or plug-ins!'''
It happens in safe-mode as well. I also experienced the same problem in IE.
'''It is an Audio related problem'''
To my astonishment I could not find an answer anywhere until I realized that once upon a time I had installed DFX Audio Enhancer!
'''You have most likely [http://www.fxsound.com/index.php?vendor=23&subvendor=1&plus=2&refer=dfx11 DFX Audio Enhancer] installed''' and corrupted. Possibly due to a a deep registry clean scan which removed some keys.
'''''Simply reinstall DFX Audio Enhancer and you problem is solved!'''''
Fire fox error messages

SUKeyCompare.cpp Error in OBIEE 11g

Hi All,
I am getting the below error for one of the report.
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 43119] Query Failed: [nQSError: 46008] Internal error: File server\Utility\Server\DataType\SUKeyCompare.cpp, line 880. (HY000)
If anyone has any clue, please let me know.
Thanks,
Soumitro

What is in report, any calculations?
I would say narrow down to a particular column, just delete a measure and execute the report if runs add it back and delete another etc.
Give some more info about the background of the report interms column expressions etc.

Objheap.cpp error in application builder

Hello everybody.
I am trying to build my application but I get the error: error in objheap.cpp line 474.
I have seen in previous answers in the discussion forums that someone got the same error, but not in the application builder but when trying to open the main.vi of the application in the development system. I have read that the reason for that was that a vi became corrupted.
But this is different. The error message is the same, but I can open the main vi of my application in the development system with no problems. I only get the error message when I run the application builder trying to build the application.
Anyone can help me?
Thanks in advance

Even though VI runs fine in the development environment, it may still be corrupted. It might be the case that there is an error in the vi.lib VIs. I recommend copying the block diagram of the VI in question to a new VI and rebuilding. If that does not help, consider a reinstall of LabVIEW or posting your VI to see if others can build it.

\src\timecode.cpp error with mp4

cs5 always crashes when I try to use some mp4 files i converted (from wmv and mkv) using Handbrake software.
the error is src\timecode.cpp-1078
these are the infos of a file:
General
Complete name :
aaaaaaaaaaaa.mp4
Format :
MPEG-4
Format profile :
Base Media / Version 2
Codec ID :
mp42
File size :
610 MiB
Duration :
27mn 2s
Overall bit rate :
3 155 Kbps
Encoded date :
Tagged date :
Writing application :
HandBrake 0.9.5 2011010300
Video
ID :
1
Format :
AVC
Format/Info :
Advanced Video Codec
Format profile :
[email protected]
Format settings, CABAC :
Yes
Format settings, ReFrames :
4 frames
Codec ID :
avc1
Codec ID/Info :
Advanced Video Coding
Duration :
27mn 2s
Bit rate mode :
Variable
Bit rate :
3 000 Kbps
Width :
1 280 pixels
Height :
720 pixels
Display aspect ratio :
16:9
Frame rate mode :
Variable
Frame rate :
29.970 fps
Minimum frame rate :
29.412 fps
Maximum frame rate :
30.303 fps
Resolution :
8 bits
Colorimetry :
4:2:0
Scan type :
Progressive
Bits/(Pixel*Frame) :
0.109
Stream size :
584 MiB (96%)
Writing library :
x264 core 112
Encoding settings :
cabac=1 / ref=2 / deblock=1:0:0 / analyse=0x1:0x111 / me=hex / subme=6 / psy=1 / psy_rd=1.00:0.00 / mixed_ref=0 / me_range=16 / chroma_me=1 / trellis=0 / 8x8dct=0 / cqm=0 / deadzone=21,11 / fast_pskip=1 / chroma_qp_offset=-2 / threads=6 / sliced_threads=0 / nr=0 / decimate=1 / interlaced=0 / constrained_intra=0 / bframes=2 / b_pyramid=2 / b_adapt=1 / b_bias=0 / direct=1 / weightb=0 / open_gop=0 / weightp=2 / keyint=300 / keyint_min=30 / scenecut=40 / intra_refresh=0 / rc_lookahead=40 / rc=abr / mbtree=1 / bitrate=3000 / ratetol=1.0 / qcomp=0.60 / qpmin=3 / qpmax=51 / qpstep=4 / ip_ratio=1.40 / aq=1:1.00
Encoded date :
Tagged date :
Color primaries :
BT.709-5, BT.1361, IEC 61966-2-4, SMPTE RP177
Transfer characteristics :
BT.709-5, BT.1361
Matrix coefficients :
BT.709-5, BT.1361, IEC 61966-2-4 709, SMPTE RP177
Audio
ID :
2
Format :
AAC
Format/Info :
Advanced Audio Codec
Format version :
Version 4
Format profile :
LC
Format settings, SBR :
No
Codec ID :
40
Duration :
27mn 2s
Bit rate mode :
Variable
Bit rate :
128 Kbps
Maximum bit rate :
240 Kbps
Channel(s) :
2 channels
Channel positions :
Front: L R
Sampling rate :
44.1 KHz
Stream size :
24.7 MiB (4%)
Encoded date :
Tagged date :
what is the problem? could it be the Variable frame rate mode?

Have you tried dragging one of the files on the NEW ITEM icon to be sure your sequence matches your file?
See 2nd post for picture of NEW ITEM process http://forums.adobe.com/thread/872666?tstart=0

Load.cpp error

i fail to run my VI and it shows load.cpp line:4081 failure. what happen?

There are number of threads on this error. Here are some:
Failure : "load.cpp", line 4081
Failure : load.cpp in line 4081
failure at load.cpp in line 4081
Is
there a fix yet for error load.cpp line 4081?
They all happen when you try to open in LabVIEW 6.1 a VI, that has some tab controls on its front panel, and that was developed in the student or evaluation edition version 6i.
If you send me the VI that causes the error, I may be able to recover it. You can either post it here, or send it to [email protected]
Zvezdana S.
National Instruments

Asiohost.cpp error

Similar Messages

Maybe you are looking for