Ask a question about using of buffer

I have read an element for a queue buffer, for there are 10 element in the queue,How can I get any element in the queue.
Attachments:
Untitled 1.vi ‏14 KB

There is a flush Queue function that will return all of the elements as an array. Then you can index this array. You can also take this array and put it back into the queue if you need to keep them. Queues aren't really made to pull items out of the middle.

Similar Messages

Where Would be the best category to ask a question about using dashboard?

Where Would be the best category to ask a question about using dashboard?

However, don't ask it in this topic. Create a new topic for the question with a title describing that you are looking for Dashboard help.

Hello , how r u, can i ask 1 question about xcode, i have mac os x 10.7.5 , n xcode version 4.6.3 i want build apps for ios 7.1 n mac os 1.9 ,, , but my macbook is old late 2008 macbook 4,1, so can i develop apps for ios7 n 1.9 using xcode 4.6.3, bcz my

hello , how r u,
can i ask 1 question about xcode, i have mac os x 10.7.5 , n xcode version 4.6.3 i want build apps for ios 7.1 n mac os 1.9 ,, , but my macbook is old late 2008 macbook 4,1, so can i develop apps for ios7 n 1.9 using xcode 4.6.3, bcz my machine cant upadte on 1.8 n 10.9,, ihave 2gb ram . core 2 duo pr, plz rely asap,
thnxs

Please type complete sentences and words. This isn't an instant message program.
https://developer.apple.com/support/ios/ios-dev-center.html

Hello , I want to ask some question about ipads \ How powerful is the iPad? How useful is it for reading books, newspaper or magazines or for surfing the web? Can you identify any shortcomings of the device? please help me :(

Hello ,
I want to ask some question about ipads \
How powerful is the iPad?
How useful is it for reading books, newspaper or magazines or for surfing the web?
Can you identify any shortcomings of the device?
please help me

it's less powerful than your average computer. THink of it like a netbook but with a better processor.
It'll do fine for surfing (although if you browse a lot of flash based sites you will need to get a third party browser since safari doesn't accommodate it)
You may do OK on reading books, papers or magazines, especially if they have apps, but the ipad's screen is backlit, so it doesn't work well outdoors and you may need to fiddle with the brightness so that you don't get eye strain (it's just like doing too much reading from a computer screen)
I would say the biggest short comings are data transfer. Apple's preferred work flow is that everything is done via iTunes or the internet....well people dont' always have 100% reliable always on internet access so you can find yourself in a situation where you can't get things on/off the iPad.
By and large, it's a good device for day to day stuff, but is not a computer replacement.

I want to ask the question about phasor measurement.

I want to ask the question about phasor measurement.the first one is that how can I accomplish the sychronized sampling with GPS?The other question is that how can I adjust the sampling rate for DAQ when the system frequency alter continuously.(if I used the DFT,due to the altering of frequency,I can't get the completed waveform)"

Synchronising DAQ with GPS depends on the DAQ sampling rate. If the rate is higher than 2 Hz you can sample the 1PPS pulse of your GPS receiver together with your data.
You change the sampling rate with the AI Clock Config.vi. You cannot do this on the fly so you must stop DAQ with AI Control.vi reconfigure the sampling rate and then start it again.
Waldemar
Waldemar
Using 7.1.1, 8.5.1, 8.6.1, 2009 on XP and RT
Don't forget to give Kudos to good answers and/or questions

Okay i just recently asked a question.about my factory unlocked iphone 3gs asking how to activate it but..

i probably shouldnt say this but,okay i just recently asked a question.about my factory unlocked iphone 3gs asking how to activate it. so i got too excited of aving it and couldnt wait for my tmobile sim card to come one more day. so i "hactivated" it (i know this voids all warrenty) and i jailbroke it just so i could use it as an ipod.it worked and i was syched.
BUTTT.... it asked me if i wanted to update the software to 5.1 and i was like " oh yes id love to" and it started downloading it and it was inrecovery mode the whole time .
when the download finished. i hit restore so i can put the software on the phone but the itunes had an error and the phone went glitchy and it does a rebooting loop. it shows the apple symbol with the slash through it for about 5 seconds and shuts off for a little bit (about another 5 seconds) and it starts up then loops the process. ive managed to turn the phone off but if i start it up it loops...what should i do? any help :/
Also it does not show up in my itunes because it is turning off to fast to detect.

Discussion of hacked phones is prohibited on these forums. Sorry, you'll need to go elsewhere to get support for a j'broke iPhone.

I have a question about using multiple ipads in our school. Each of our teachers have a iPad and AppleTV in their classroom. The issue is, with our classrooms so close in proximity to one another, is there a way to pair teacher

I have a question about using multiple ipads in our school. Each of our teachers have a iPad and AppleTV in their classroom. The issue is, with our classrooms so close in proximity to one another, is there a way to pair teacher #1 iPad to its AppleTV without effecting/projecting onto the adjacent teachers #2 classroom AppleTV?

Not as such.
Give the AppleTV units unique names and also enable Airplay password in settings with unique passwords for each teacher.
AC

Hi, I have quick question about use of USEBEAN tag in SP2. When I specify a scope of SESSION for the java bean, it does not keep the values that I set for variable in the bean persistent.Thanks,Sonny

Make sure that your bean is implementing the serializable interface and that
you are accessing the bean from the session with the same name.
Bryan
"Sandeep Suri" <[email protected]> wrote in message
news:[email protected]..
Hi, I have quick question about use of USEBEAN tag in SP2. When I
specify a scope of SESSION for the java bean, it does not keep the
values that I set for variable in the bean persistent.Thanks,Sonny
Try our New Web Based Forum at http://softwareforum.sun.com
Includes Access to our Product Knowledge Base!

Question about using new battery in old Powerbook

I have a pre-intel Powerbook G4, and the battery is pretty much toast (lasts about 15 minutes now). I have ordered a new battery for it, and I have this question about using it:
Am I smarter to keep the new strong battery out of the PB most days (as I usually work with it plugged in at home) and just pop it in when I know I will be out surfing on batteries? Or is it just as good living in my laptop 24/7 and only occasionally being called upon to do its job?
Current bad Battery Information below:
Battery Installed: Yes
First low level warning: No
Full Charge Capacity (mAh): 1144
Remaining Capacity (mAh): 1115
Amperage (mA): 0
Voltage (mV): 12387
Cycle Count: 281
thanks folks, Shereen

Hi, Shereen. Every Powerbook battery wants to be used — drained and then recharged — at least every couple of weeks. If you've always used your Powerbook on AC power nearly all the time, and not followed that pattern of discharging and recharging the battery every week or two, it's possible that your use habits have shortened the lifespan and prematurely diminished the capacity of your old battery. Of course it's also possible that your battery is merely old, as a battery's capacity also diminishes with age regardless of how it's used. You didn't say how old the battery is in years, so this may or may not be an issue. I mention it only because it can be an issue.
For general information on handling a battery for the longest possible lifespan, see this article. My advice on the basis of that article and long experience reading these forums is that it would be OK to do as you propose, but I doubt that you'd derive any significant benefit from it. You would still want to be sure of putting the new battery through a charge/discharge cycle every week or two, even if you didn't have a reason to use the Powerbook away from home or your desk, because sitting unused outside the computer is just as bad for a battery as sitting unused inside it. And you should never remove the battery from your computer when it's completely or almost completely discharged and let it sit that way any longer than a day or two.
Message was edited by: eww

Question about using TVARV in an ABAP program

Hello gurus, Im sorry about the silly question.
I have a question about using TVARV in an ABAP program.
A program is presenting a problem and I think that in this code:
SELECT SIGN OPTI LOW HIGH
FROM TVARV
INTO TABLE R_1_163431035_VELOCIDADE
WHERE NAME = '1_163431035_VELOCIDADE'
AND    TYPE = 'S'.
IF ZMM001-VELOCIDADE_B   IN R_1_163431035_VELOCIDADE AND
      ZOPERADORAS-OPERADORA = 'ABCD' AND
      ZMM001-MATERIAL       IN R_1_163431035_PRODUTO.
ELSE.
ENDIF.
What happens is that the value "ZMM001-SPEED" B not exist in "R1_163431035_VELOCIDADE" but the program executes commands under the IF and not under the ELSE, as I imagine it would work. Is this correct ?
I am new to ABAP programming, but I have a lot of XP in other programming languages and this makes no sense to me.
Anyone know where I can find some documentation of the use of "TVARV" in ABAP programs?
I search the Internet if other programmers use TVARV this way, but found nothing, which leads me to think that was a quick and dirty solution that used here.
If this is a bad way to program, what would be the best way?
Regards
Ronaldo.

Hi Ronaldo,
But in this case, the range is not empty, there are 17 records, in this way.:
For the column "SING" all values are "E"
It means that the result is false if ZMM001-VELOCIDADE_B has the same value as one of the 17 records (E = exclude).
For instance, if it has value 'C' and one of 17 records matches C, then the result is false.
The "IF" with "IN" using "TVARV" as used in the program of the post above has the same behavior of a selection screen?
Yes, the same behavior as the selection criterion to be exact. You can press the help key in the complex selection dialog for more info.
I know it's a silly and very basic question, but other language that I used, only the SQL has the "IN" operator, but I think they work in different ways, so I would like to understand how it works in ABAP.
Not silly ;-). Yes they work differently.
More info here:
- http://help.sap.com/saphelp_nw70/helpdata/en/9f/dba74635c111d1829f0000e829fbfe/frameset.htm
- http://help.sap.com/saphelp_nw70/helpdata/en/9f/dba71f35c111d1829f0000e829fbfe/frameset.htm
BR
Sandra

Question about using Macbook in Vietnam.

I have a question about using Macbook in Vietnam. I bought my mac here in the US, and I'm going to visit Vietnam, but I'm wondering if I can plug in the power directly into the wall or I have to need any convert power modem for my mac. The only thing I know that Vietnam use 220V so, can anyone help me?

You may need a plug adaptor, but you don't need a power converter.
(43828)

I have a question about using adobe CS files in CS6 edition

I am a graphic artist . I have a question about using adobe CS files in CS6 edition. when I am gonna open thse adobe CS created files in CS6 Edition i get a color variation than i made with the CS version.Please give me an idea about this issue as soon as possible.If you need i can upload my problem as a screenshot to clearity

donrulz,
Are your Edit>Color Settings the same?
Are you using spot colours, such as Pantone (there have been some changes in CMYK values with new colour books)?

Question about Using PAPI Web Service in PowerBuilder 9

Hi, all.
I Have a simple question about using papiws in power builder 9.
In pb9, I created a new Web Service Proxy Wizard and I input a url for papiws(ex. http://seraphpernote:7001/papiws/PapiWebService) and click next.
But I couldn't get any Service List.
In Eclipse, I used this url for using papiws well.
Does anybody know about this case??
help me plz.

IIRC you must activate PAPI-WS for the engine. In Studio you do it by right-clicking on the project, then "engine preferences". In enterprise/standalone you must activate PAPI-WS in the Admin Center.

I wanted to ask a questions about financing

I want ask a question about financing 2 macbookpros?

You need to call Apple about that. These are just user forums. We're all users here, like you.

HT3702 Hi I would like to ask a question about my billing for some things

I would like to ask a question about my billing

This is not Apple. These are user forums. Questions about billing, credit cards, etc. should be addressed directly to Apple.
Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
To contact product and tech support visit online support site.
For Mac App Store: Mac App Store Customer Service.
For iTunes: Apple Support for iTunes - Contact Us

Ask a question about using of buffer

Similar Messages

Maybe you are looking for