Ask About Joining CWMS 2.0 Meeting

Hi all,
I just want to ask, can i join CWMS 2.0 meeting 15 minutes before the meeting started? because in the webex cloud, we can set the time that we can join before the meeting started
Thanks for your help.
Regards,
Helmi

The setting is 15 minutes per the Administration guide. As I said before, the timer itself cannot be changed only enabled or disabled via the settings selectesd. If you find this to be inaccurate, you need to first verify the NTP configuration and sync across the CWMS VM hosts to ensure you don't have time sync or slip issues. Secondly, compare that source to your reference when you are testing. If you find this to be behaving incorrectly AND there are no NTP issues then you should open a TAC case. I've done a couple of larger CWMS deployments and have not found there to be an issue with this particular item.

Similar Messages

  • I updated my software to iOS6 and now my phone won't automatically join known wifi networks even though I have it on.  It goes back to 3G every so often when I'm at home instead of using wifi, and each time I ask to join it asks for my wifi password

    I updated my software to iOS6 and now my phone won't automatically join known wifi networks even though I have it on.  It goes back to 3G every so often when I'm at home instead of using wifi, and each time I ask to join it asks for my wifi password

    Try this for your home Wi-Fi:
    On your iPhone, Settings > Wi-Fi > select your home network > "forget this network"
    Power down (unplug) your wireless router
    Restart your iPhone
    Plug in your router
    Re-join that network
    I don't know if this simple technique will fix it for good but try it. There is a long thread about this problem here: iOS 6 WiFi Disabled

  • I run OSX10.6.8. Just dwnlded FF8.1 and everytime I go to open it I am asked about the disk image. But if I delete the dmg, the program won't run.

    I just downloaded the 8.1 version. It was a 30+mb file. Previously I ran 4.0. So I drag the new Firefox icon into the Apps folder. It does its merge thing with the old version. Problem is when I click to open FF now, it always throws up this window asking me about the disk image of what I just downloaded. I even tried restarting the computer--but the same message pops up. I checked on your website and it says that I need to "eject" the disk image (i.e. I'm guessing that means the 30+ mb file I just down loaded), so since I don't have an eject option that I can find (except for external harddrives and cd/dvd), I just drug it into the trash. I go to empty the trash and I get a message that that dmg file is "in use" even though FF is completely shut down. So again I'm guessing that means that even though I already merged that dmg file with the old 4.0 version file, if I dump the update file it seems that it's going to mess up the actual revised program file still remaining. I just want to be able to click on the icon in my dock like I've always done and have FF open. I don't want to keep being asked about disk image stuff. Somehow this feels like an easy resolution, but I just can't seem to put my finger on how to resolve it. Thanks for you help.

    Nope---didn't work. I've owned Macs for about 12 years so although I am brain dead on some things, I do have a working knowledge on most things. I only say that to say this--I did try holding down the mouse and choosing empty trash. It asks if I want to permanently delete what's in there. I say yes--and then I get the same identical message again-----'The operation can't be completed because the item "Firefox 8.0.1.dmg" is in use I can then click stop, or continue.' So apparently that complains the same way it does if I click it up on the menu :)))
    As for item owned by---that's not an issue and isn't coming up. User is not a problem either as I am the only user on this system. There is only ONE file in my trash at the moment at that is this dmg file. Nothing Mac. Nothing owned by anyone other than Firefox. The problem seems to be that the dmg file and the original 4.0 FF file are working in tandem with each other--even though I have already drug the new 8.0 globe into the Apps folder and it updated the FF app with the new stuff. If I could force the dmg file to go away, I would do so, but at every turn the system is telling me it can't be done because it seems to think that dmg file is in use---even though everything is shut down and/or ejected. Hey--I'm getting ready to head out and won't be back till evening. I'll check back in this evening. Thank you again for your help.

  • How can I change the "Ask to join new networks" option using a terminal command?

    We are currently switching to a new wireless network throughout our school district and I have pushed commands to connect to the new and remove the old. However, any Macs that have "Ask to join new networks" enabled are jumping over to our unsecure guest network, even if that network has been removed from the list of Preferred Networks. So far the fix has been to remove the guest network from the list of Preferred Networks and then disable Ask to join. The only issue I'm running into now is I have been unable to find a terminal command to change this setting. Once I have the command I can write a script and send that out to all of the Macs.
    So is there a way to disable "Ask to join new networks" using command line?

    sed -i "" 's/Prompt/DoNothing/' /Library/Preferences/SystemConfiguration/preferences.plist

  • TS1702 when I am installing a new free app on my iphone , 'm asked about the way of payment . I check the none option in my apple Id account but it wouldn't be accepted . what should I do ?

    hi , I faced with a new problem recently while installing a free app.
    when I am installing a new free app on my iphone , I'm asked about the way of payment . I check the none option in my apple Id account but it wouldn't be accepted . what should I do ?
    regards

    You need to ask Apple for assistance with getting back into your old ID. To do this, click here and pick a method; if that page doesn't list one for your country or you're unable to resolve this issue through the Account Security team, fill out and submit this form.
    (118441)

  • Hi, I asked about my WiFi modem? Sorry but I don't understand any of the suggestions given to me. We don't have an Apple Store where I live, the rest of it's over my head. I also don't own a PC. Any other suggestions? What's IPS?

    What I want to know is why did my WiFi modem work just fine for a whole week, now it doesn't. I can't get any Internet access if it's connected, if it's not I can't download apps from AppStore,as I have no Internet access. I'm tech literate, I don't understand what an IPS is, I don't know about ports and numbers, and there is no Apple store where I live. So now what am I supposed to do? My mum bought me the **** thing, it cost her $150, and it's worked for a week, and then excuse my French, **** itself! Can someone please help me, and in English please? I've only had an iPad since Christmas, I don't have a PC and wouldn't know how to do any of that stuff if I did. Very Frusterating!

    You asked about IPS. I believe you mean ISP, or your Internet Service Provider.
    Since you don't have a computer, you won't be able to change the router settings.
    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
    http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    iOS 6 Wifi Problems/Fixes
    Wi-Fi Fix for iOS 6
    https://discussions.apple.com/thread/4823738?tstart=240
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    How to Boost Your Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
    Troubleshooting a Weak Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    Wi-Fi or Bluetooth settings grayed out or dim
    http://support.apple.com/kb/TS1559
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • I have an iMac model 4,1 running OSX 10.6.8.   The CD/DVD drive went bad and I have replaced it.  However I can not get disks to eject.   I have asked about this before and tried all all the suggestions I have received but I can not eject.

    I have an iMac model 4,1 running OSX 10.6.8.   The CD/DVD drive went bad and I have replaced it.  However I can not get disks to eject.   I have asked about this before and tried all all the suggestions I have received but I can not eject.  
    Yesterday I opened up the iMac and reinstalled the drive to make sure that it was not an alignment problem.   I still can not eject.   When I try to eject the drive makes noises like it is ejecting but the disk does not come out.
    How do I solve this problem?

    Hi again Hal
    Link to your other thread > The slot loading CD/DVD drive in my...: Apple Support Communities
    You have also tried resetting the PRAM as I suggestion in your other thread...?
    See resetting the PRAM > About NVRAM and PRAM
    1. Shut down the computer.
    2. Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    3. Turn on the computer.
    4. Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
    5. Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    6. Release the keys.

  • How do I create a separate Address Book? I'm not asking about a mailing list but an address book where the addresses are not mixed in with my regular address b

    How do I create a separate Address Book? I'm not asking about a mailing list but an address book where the addresses are not mixed in with my regular address book. I already have three address books created for me by Thunderbird. I add all new addresses to one of those but am afraid to delete the other address books because some of their addresses are not repeated in my "main" address book. So if I don't delete all the names in one of the existing books, I need to create an empty book that will not mix the addresses with those in another address book. HOW DO I CREATE A NEW, EMPTY ADDRESS BOOK? I want to be able to create various mailing LISTS using the addresses in this new book so I will eventually have a special address book with a variety of mailing lists I can use as I wish.

    In 24.4.0 there is no File|New|Address Book. There is File|New|Address Book Contact. How do I create a new address book ?

  • What do I have to write when in compilation form they ask about url website?

    I am trying to complete the compilation form create a sell books account. I can't go on because I don't know what do I have to write when in compilation form they ask about url website (in Physical Address and Contact Information section).
    Sorry for my english
    Thank you

    Just as the message says, she can't search places in Canada.
    Unfortunately, location based Siri searches are only supported in the U.S. for right now.  They are coming to other places such as Canada but we don't know when.

  • WTK 2.5.2 Emulator always asks about file access

    Is there a way to suppress the question that the emulator asks about accessing a file using a Fileconnection? It asks it on EVERY SINGLE ACCESS and seriously interferes with debugging. (On the real device, I can give permission once and be done with it).
    Michael D. Spence
    Mockingbird Data Systems, Inc.

    In (for Windows) C:\Documents and Settings\spence\j2mewtk\2.5.2\appdb:
    - Make a copy of _policy.txt so you can undo this later if you want.
    - Find the domain you midlet runs in (e.g., domain: identified_third_party).
    - Change these two lines:
    blanket(oneshot): read_user_data_access
    blanket(oneshot): write_user_data_access
    to read
    allow: read_user_data_access
    allow: write_user_data_access

  • HT1918 When trying to download the free applications from itunes app store its asking about billing information

    When trying to download the free applications from itunes app store its asking about billing information.
    Billing popup will display and navigating to billing detail page.

    Unless the instructions on this page are followed when creating an account : http://support.apple.com/kb/HT2534
    then credit card details will need to be entered before the account can be used to download any item (free or paid-for) from the store.
    If you are being prompted to review the account then you could see if this post by mountaingoatgirl lets you do so without needing to enter credit card details : https://discussions.apple.com/message/24303054
    If not then you will need to enter credit card details - you should be able to remove the card after entering it

  • Hi can i ask about using an ipad 2 to exchange a new ipad mini

    Hi can i ask about using an ipad 2 to exchange a new ipad mini

    Apple doesn't take trade-ins. You can a use a number of sites that take trade-ins or just give you cash for your device. One site is:
    www.gazelle.com
    There are others out there. Just Google "ipad trade-in"
    Your other option is selling your old iPad yourself.
    In any case, before you sell the device, follow the directions here to allow it to be used by the buyer as a new device.
    http://support.apple.com/kb/HT5661

  • Why asking about payment option while going in app store

    In app store i want to install Xcode its free now but its asking my Apple Id then its asking about my card details why ?? how can i install X code in my Mac mini?? Please suggest me..

    Have you used the account to purchase (even free items) before?

  • Just let me contact customer services to ask about a product

    Hi,
    I just want to be able to contact customer services without having to wade through tons of pages of so called instant answers that dont address my enquiry. Why is it so difficult for potential customers to be able to directly communicate with sales without having to go through this agony of irratating selection of questions that cannot help me if I am trying to ask a question from the view of a non user in the first place. Modern buisiness practices these days are plain stupid, frustrating, time consuming, and are an excellent way of turning potential customers away!
    Can someone please just give me a direct email contact to sales!
    Rant over...

    Even the damn message content wont allow cut and pasting of text, yet another frustrating Adobe time wasting mechanism to turn away potential customers who just want to get a simple answer. Adobe is almost staggering in its arrogance towards cultivating new customers, forced into long and time consuming processes in finding out if YOUR product can cater for MY needs...as I said staggering...
    Having no alternative to have my enquiry dealt with in a more personal manner,  as Adobe managers sitting in thier virtual ivory towers practicing thier virtual buisiness practices, obviously deem forums as their ultimate answer to saving money on actually employing people to talk to their VERY real customers (what on earth does their sales department do then if they don't allow actually talk to real customers in a personal manner?), I am forced to post my question rather reluctantly here.
    I am in need of a product that can support the SECURE distribution of a magazine, ideally by email (or similar). Ideally I need a function that prevents a document from being forwarded onto others by the recipient, in order to protect our product from unlawful distribution onto 3rd parties. Passwords are a possible solution, however a password can simply be forwarded to a 3rd party as easy as a document can, so is there a more secure way of protecting our product?
    Alternatively, is there a way of encrypting the recipients email address as a function of opening and viewing the document, thus also preventing it from being forwarded to 3rd parties?
    I am looking to distributing our product to over 1000 fee paying members.
    Well I have been forced to spend over 1 1/2 hours now trying to get some sort of answer to my question. As I said, the business model and attitude by Adobe towards potential customers is staggering, even down to the fact that I have had to write this particular text twice due to the way the forum constraints work in not supporting a simple cut and paste of text function, more frustration and time wasted. Adobe need to take on board that forums do not help in fostering their image or business for new customers, after all, if I was buying a new car, I don't expect to go to a shiny new car showroom to find the doors locked and not being able to talk to the sales personal within, then having to turn to a car enthusiasts club to ask if that particular model will meet my personal transport needs, do you? As I said, quite staggering....

  • My home button isn't working well so i went to my service provider to ask about the problem. They advised me to update my iPhone to iOS 5 but the problem is no matter what i do, there is always an error. What should I do?

    My home button isn't working well so i went to my service provider to ask about the problem. They advised me to update my iPhone to iOS 5 but the problem is no matter what i do, there is always an error. What should I do?

    If you are having Issues with downloading iOS 5....
    Try temporarily disabling your firewall and antivirus software and try again...
    See here for Connection Issues
    http://support.apple.com/kb/TS1379
    From Here
    http://www.apple.com/support/itunes/troubleshooting/

Maybe you are looking for

  • Caused by: oracle.xml.parser.v2.XMLParseException: '=' missing in attribute

    This is a Bursting problem under EBS 5.6.3. In production we have 5.6.2 and since our development system to 5.6.3 has been upgraded, the following error occurs on every single Burst being done using the Concurrent Manager only: Caused by: oracle.xml.

  • Error while PGI

    Hi I am getting an error while PGI "Account 400000 requires an assignment to a CO object" How to solve this ?

  • Get the http destination, not simple!

    Hi all, I have a Java WebDynpro application that contains some link to BSPs. I have added the bsp http address in the Destination service (in Visual administrator), and i'm tring to get it from a Java WebDynpro like sap documentation suggested. The c

  • Brother DCP8080DN scanner does not show up in Image Capture's list of devic

    Hi, I've been printing successfully to a Brother DCP-8080DN for a while now. I have the latest CUPS driver and recently installed the latest Twain driver from Brother. I can scan from the Brother Control Center utility but the printer scanner does no

  • Lost "recently added" file

    Call me stupid but somehow the "recently added" file was deleted somehow from my itunes.I just cant figure out how to reinstall it??Any help is greatly appreciated. Thanks Jay