Ask about re-enable button (play, fastforwar​d,mute) on Satellite L510

Hi All,
I wanna ask about re-enabling toshiba satellite L510-S407 which installed under XP SP3. Because before i installed common modules from toshiba, those button running well. But after i installed toshiba common modules, the button (where is located side by side with power button) goes disabled, not functioning anymore. Is there anything that i could do or some driver that should be installed  to make those button functioning again?
Thanks

it's solved now, i need to install toshiba touchpad utility,toshiba controls,toshiba utility.

Similar Messages

  • Despite my Javascript for Firefox 23 being "enabled" ( I checked re the "about:config" steps), some websites are still asking me to enable my Javascript.

    Despite my Javascript for Firefox 23 being "enabled" ( I checked re the "about:config" steps), some websites are still asking me to enable my Javascript to view content. Safari works without any problem. OS/X 10.8.4

    These files are hidden to me because my OS/X is 10.8.4 and I cannot make them appear. This is way, way more trouble than it's worth. Thanks for your help. Firefox has lost me.

  • My home button isn't working well so i went to my service provider to ask about the problem. They advised me to update my iPhone to iOS 5 but the problem is no matter what i do, there is always an error. What should I do?

    My home button isn't working well so i went to my service provider to ask about the problem. They advised me to update my iPhone to iOS 5 but the problem is no matter what i do, there is always an error. What should I do?

    If you are having Issues with downloading iOS 5....
    Try temporarily disabling your firewall and antivirus software and try again...
    See here for Connection Issues
    http://support.apple.com/kb/TS1379
    From Here
    http://www.apple.com/support/itunes/troubleshooting/

  • Hi i just wanna ask about the volume down button in the ipad 2 ,it was mute the device when hold it at once but before 2days i noticed that the device did not mute when i hold it ,why? and how i fix this by the way it is still volume down

    hi i just wanna ask about the volume down button in the ipad 2 ,it was mute the device when hold it at once but before 2days i noticed that the device did not mute when i hold it ,why? and how i fix this by the way it is still volume down

    Have you tried restarting or rebooting the iPad and then see if the volume control will work again?
    Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

  • Hi i'm new here, i wanna ask about supercell game Clash of Clans, i think someone hacked my village, yesterday i used my dad's phone which is Android to play coc, since then someone from another device keep playing and even taking gems, i've tried t

    Hi i'm new here, i wanna ask about supercell game Clash of Clans, i think someone hacked my village.
    Yesterday i used my dad's phone which is Android to play coc, since then someone from another device keep playing and even taking gems, i've tried to log out and even change my gmail account, but it's not working, what should i do?

    That is priceless!!!  Thanks!  I sure needed a good laugh after spending/wasting hours & days trying to either get my c6280 to give up on its Ink System Failure fixation, or find a decent replacement.  Unfortunately I need the Smart Web Printing feature that I guess only HP has, or I'd try a different brand. And now even HP has very few models with that available.
     My error msg is a little different from those previously stated, but close:  0xc18a0201.  Even tho there were frustrations with my c6280, I did like several of its unique features which are hard to find now under $100.  I hate how HP (& I suppose other brands also) are CONSTANTLY changing models & then of course ink cartridges.
    Oh heavens, I've had the c6280 a whopping 2 1/2 years!   I'm sure they want us poor slobs to have to buy a new one every year & a day!  To say nothing of the exorbitant prices for ink.  And now if this one is really dead in the water, I have SIX unused #02 ink cartridges which I cannot return---I got them in a combo pack, & for some reason have wound up with THREE lite pink & THREE lite blue cartridges, while having to buy extras of the other colors, that ran out before the others!!!   Yeah, & what's with that not being able to print in BLACK if a color runs out????
    Anyway I really loved your essay!   It's a classic!  And says it all!  I hate that we have to be 'slaves' to the electronic 'wonders'!!!

  • After updating to v. 24.0 (and restarting) ALL add-ons (regardless whether they work or not) are marked "(disabled)", and clicking Enable button does nothing

    After updating to v. 24.0 (and restarting, several times) ALL add-ons (regardless whether they work or not) are marked "(disabled)". I tried clicking "Enable" button for each add-on and nothing happened. There is only one add-on which is marked as incompatible with this version (but it was also incompatible with previous version, and so marked).
    Clicking "Update Add-ons", gives a short list of add-ons but "Install Updates" button is pale and doesn't work. I can only sort list by name or last update.
    Also, I disabled Ask Toolbar and that went well. When I click "Enable" button (button works ONLY for this add-on) it takes forever to get note: “Ask Toolbar will be enabled after you restart Firefox”, I used to get this info in seconds time before this update. (I do not really want Ask Toolbar, I just used it to see whether if I disable and then enable an add-on might do the trick.)
    Bottom line – I can not tell if add-on works (i.e. if it is enabled or disabled) unless I try using it.
    Even when I posted this question and installed Troubleshooter, it's also marked as "(disabled)"

    You're welcome
    Are this screenshots from an extension window because the built-in about:addons page looks different?

  • Record enable button on garageband

    unable to find the record enable button in the track header on garageband

    Same problem.  I have an Onyx 1620i mixer, late-2013 Macbook Pro.
    Core Audio on the Macbook recognizes the Onyx and its multiple tracks.
    When I create a track in Garageband (using Microphone/Line option) then during setup Garageband asks me to select which of the 16 channels on the Onyx I want the track to record.  The track then shows input level bouncing around as sounds are made on a mic connected to the mixer on the appropriate channel.
    Everything seems to be working fine!  Except no Record Enable button appears on the track.  Can't record the audio that appears to be coming into the computer just fine.
    I am aware that there are issues with Mackie mixers after OSX 10.7.1 (or 10.8 with some models).  Mackie hasn't bothered to keep up to Mavericks.  However I didn't think the issue was "doesn't work at all", but that there were some latecy problems that can cause hiccups.
    So, despite appearances Garageband can't record from this device?  Or am I missing something else to record-enable a track?
    Thanks in advance for any advice about resolving this, or even advice about an excellent Mavericks-capable device that will allow me to mix about 16 external inputs into the Macbook Pro.

  • Amost every page I open, Firefox asks whether to enable Flash player. How to get rid of this nagging pest ?

    Amost every page I open, Firefox takes a line off my netbook screen to ask whether to enable Flash player.
    How to get rid of this nagging pest ?

    downloaded 17MB flash installer from Adobe website.
    This download did not run properly, reporting that it had some error.
    Still plagued with FireFox queries about Flash.
    Don't much care about having flash plugin in FireFox.
    Prefer to download a flash file, scan with virus checker, then play it with VideoLAN.
    So I disabled Flash plugin to "Never Ask" but still the noxious popup
    "FireFox has prevented the outdated plugin "Adobe Flash" from running on helpx.adobe.com. Continue Blocking ? Allow ... X"

  • Hi, I asked about my WiFi modem? Sorry but I don't understand any of the suggestions given to me. We don't have an Apple Store where I live, the rest of it's over my head. I also don't own a PC. Any other suggestions? What's IPS?

    What I want to know is why did my WiFi modem work just fine for a whole week, now it doesn't. I can't get any Internet access if it's connected, if it's not I can't download apps from AppStore,as I have no Internet access. I'm tech literate, I don't understand what an IPS is, I don't know about ports and numbers, and there is no Apple store where I live. So now what am I supposed to do? My mum bought me the **** thing, it cost her $150, and it's worked for a week, and then excuse my French, **** itself! Can someone please help me, and in English please? I've only had an iPad since Christmas, I don't have a PC and wouldn't know how to do any of that stuff if I did. Very Frusterating!

    You asked about IPS. I believe you mean ISP, or your Internet Service Provider.
    Since you don't have a computer, you won't be able to change the router settings.
    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
    http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    iOS 6 Wifi Problems/Fixes
    Wi-Fi Fix for iOS 6
    https://discussions.apple.com/thread/4823738?tstart=240
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    How to Boost Your Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
    Troubleshooting a Weak Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    Wi-Fi or Bluetooth settings grayed out or dim
    http://support.apple.com/kb/TS1559
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • JWS shows a dialog asking about update new shortcut in no-Japanese

    I installed an application at JRE 1.4.1_03, with Japanese JWS. After
    JRE1.4.2 came up, I uninstalled JRE1.4.1_03
    and re-installed JRE1.4.2 without the uninstalled application.
    JWS shows a dialog asking about updating new shortcut. But the "Yes" and
    "No" buttons in the dialog box are not in Japanese, they are just empty
    squares.
    How can I fix these boxes into Japanese "Yes" and "No" buttons?

    Thank you very much for answering my question.
    I installed JRE1.4.2 Japanese Page, so it will be International version. The installer and other dialog words are in Japanese. Just "Yes" and "No" buttons in Dialog are not in Japanese.
    Thank you,
    Miki
    Sounds like you installed the JRE1.4.2 English only
    instead of the
    International version.
    Manfred.

  • Why won't movies in buttons play in extras section?

    Hello everyone,
    I'm working on a project where there is a button (play Movie) that has a moving clip in, and this is ok. However, I've created an extras section with a couple of short movies in there. Although I can see the info box asking me where I want the movie to play from, it doesn't work. I only get a still image.
    I've read the help menu over and over, but I can't see what I'm missing. Can anybody help? Thanks.

    Just got view options open.  That didn't help.

  • HT5312 my ipad suddenly ask about backup and not responding i try to connect to net or to unlock it nothing work what can i do

    my ipad mini hasnt been backed up since i bought it now sudenly it ask about back up icant even unlock it ifeel te please help merrible

    Have you tried a reset ? Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider if it appears), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • No record enable button

    Hi, there is no Record Enable button between the Mute and Freeze button. I can't for the life of me remember how to put it there and can't find it in the reference guide or within the forum. How do I make it show up in the Track List?
    Many thanks, Ros

    Thanks a million Steve. I'm not a Garage Band user, but today I was able to record directly into it using the Built-in Input. It automatically set the source as "Stereo 1/2 (Built in input)", so at least I know that the computer Audio Input is working.
    I don't know how to load it as a Logic project, but I saved it as a "Compact Project" to export it to iTunes. Then I imported the audio file into LE. I have the audio file, but not the Record Enable button.
    So finally, I re-installed LE....guess what? Still no Record Enable button, not even in the Tutorial song. I used the Logic Set-up assistant again and chose Built-in input as the driver, rebooted. It tells me it will use the Built-in Inputs as it starts up. It shows Built-in input as the driver in the Core Audio LE preferences, but shows No Input in the arrange window when the Audio track is selected. If I touch Built-in input (as the driver) in the Core audio LE preferences, it disappears from the list of drivers (the only other one is Built-in Output) and asks me to reboot to launch CoreAudio, then the whole process starts over again.
    I did a fairly extensive search in the forum (several pages) before posting my question, but I'll go back through it again.
    The LE7 Manual just states that you should click the record Enable button on the Arrange channel strip. The problem is, it ain't there!
    I really appreciate your assistance and calling up your friend all.
    Thanks, Ros

  • I run OSX10.6.8. Just dwnlded FF8.1 and everytime I go to open it I am asked about the disk image. But if I delete the dmg, the program won't run.

    I just downloaded the 8.1 version. It was a 30+mb file. Previously I ran 4.0. So I drag the new Firefox icon into the Apps folder. It does its merge thing with the old version. Problem is when I click to open FF now, it always throws up this window asking me about the disk image of what I just downloaded. I even tried restarting the computer--but the same message pops up. I checked on your website and it says that I need to "eject" the disk image (i.e. I'm guessing that means the 30+ mb file I just down loaded), so since I don't have an eject option that I can find (except for external harddrives and cd/dvd), I just drug it into the trash. I go to empty the trash and I get a message that that dmg file is "in use" even though FF is completely shut down. So again I'm guessing that means that even though I already merged that dmg file with the old 4.0 version file, if I dump the update file it seems that it's going to mess up the actual revised program file still remaining. I just want to be able to click on the icon in my dock like I've always done and have FF open. I don't want to keep being asked about disk image stuff. Somehow this feels like an easy resolution, but I just can't seem to put my finger on how to resolve it. Thanks for you help.

    Nope---didn't work. I've owned Macs for about 12 years so although I am brain dead on some things, I do have a working knowledge on most things. I only say that to say this--I did try holding down the mouse and choosing empty trash. It asks if I want to permanently delete what's in there. I say yes--and then I get the same identical message again-----'The operation can't be completed because the item "Firefox 8.0.1.dmg" is in use I can then click stop, or continue.' So apparently that complains the same way it does if I click it up on the menu :)))
    As for item owned by---that's not an issue and isn't coming up. User is not a problem either as I am the only user on this system. There is only ONE file in my trash at the moment at that is this dmg file. Nothing Mac. Nothing owned by anyone other than Firefox. The problem seems to be that the dmg file and the original 4.0 FF file are working in tandem with each other--even though I have already drug the new 8.0 globe into the Apps folder and it updated the FF app with the new stuff. If I could force the dmg file to go away, I would do so, but at every turn the system is telling me it can't be done because it seems to think that dmg file is in use---even though everything is shut down and/or ejected. Hey--I'm getting ready to head out and won't be back till evening. I'll check back in this evening. Thank you again for your help.

  • How to remove the button "play" and "stop" in that flash animation?

    The animation is this one ...
    http://adf.ly/OTGyh
    Hello, I made a simple flash animation of a character talking ... The only problem is that this animation has the button "play" and "stop" and I do not want it ...
    I want so carry out the main character speak the message and stop yourself automatically without user intervention to push any buttons ...
    I have the animation code, how do I get this code to the buttons and start the animation so load the page?
    Ah, and how to put the link to a page by clicking on this open a flash site?

    How to do it step-by-step? Because i'm beginner in FLash and that things of animation, codes, functions...
    And I create that simple animation in other program, not using the Adobe Flash, but I think can be edited that file animation in Flash because I have the files ".swf" and ".flv"...
    I don't know how to do it in Adobe Flash CS3, but I have that program installed in my pc, then can you talk me what to do it?
    Sorry my bad english, i'm from Brazil.
    That is the folder contains the files:
    https://dl.dropboxusercontent.com/u/11826717/off/laranja/files_animation.jpg
    That is the Download the files of that folder if you want see better:
    https://dl.dropboxusercontent.com/u/11826717/off/laranja/laranja.rar

Maybe you are looking for