[ASK] Set Network Address Restriction With Script

Hi all, i have a question about set network address restriction.. if i post in wrong category i'm very sorry about it because i don't know where i supposed to post this..
i need to set network address restriction to every user in my tree..
the problem is there is hundreds of user that i need to set the restriction.. i think it will take a lot of time if i do it one by one..
i created the user with script, and i want to ask whether there is a command to set network address restriction with script or maybe there is another simple way to set network address restriction..
thanks..

Is the restriction going to be the same for all users? Depending on what
"script" you use, you should be able to also set the restriction at the
same time - its just another attribute value to set.
Peter
eDirectory Rules!
http://www.DreamLAN.com

Similar Messages

  • I made the fatal mistake of allowing iCloud to handle my @mac mail account. I had set this address up with aliases and never had a problem.  Ever since iCloud has been handling it I have had problems. It seams impossible to claim my account back from iClo

    I made the fatal mistake of allowing iCloud to handle my @mac mail account.
    I had set this address up with aliases and never had a problem.
    Ever since iCloud has been handling it I have had problems.
    It seams impossible to claim my account back from iCloud. How can it be achieved or has Apple set a booby trap?

    iCloud is the successor to MobileMe. MobileMe shuts down forever tomoorrow.
    If you only want to use the email portion of your previous MobileMe account you can. You do not have to use all the other features of iCloud, just like you didn't have to use all the other features of MobileMe.
    The email account has not really changed at all. Just the server address it comes from.
    The sending emails problem you are having, is this on your Mac in Mail, in webmail at iCloud.com or on your iOS device?
    When it doesn't succeed in sending, what does it do? Any error message?
    What mail server settings are you using in Mail? What version of Mac OS X are you using?

  • Finding & setting network address for WRT54GL v1.1

    G'day -
    I'm generally successful using a WRT54GL in a small home office network, but want to determine it's LAN and WAN network address and then set them manually.  How can I search for this?  It is no longer default 192.168.1.1 because that's being used by my DSL modem.  Both are wired to a gigbit network switch, and connected via both wired LAN computers and WAN laptop.
    My specific trouble of is that I'm having trouble getting a WAN Squeezebox to see the router.  I suspect it's trouble with floating network addresses, so I'm wanting to do manual assignments.  My first reaction is to not to reset the router because I figure it will want to take on the address of the DSL modem.  Of course I could change the modem address, but since it's not broke... 
    WRT54GL is running Tomato 1.21.  I'm a network novice.  I tried to no avail following another post:  http://forums.linksysbycisco.com/linksys/board/message?board.id=Access_Points&message.id=9160&query....
    Thanks!
    Solved!
    Go to Solution.

    To determine the LAN Address, on a hard wired computer click Start >> All Programs >> Accessories >> Command Prompt...A black box will appear(Command Prompt)...In the Command Prompt window type ipconfig and press 'Enter'...Look for Ethernet Adapter Local Area Connection IP Address , Subnet Mask and Default Gateway...
    Default Gateway address is your router's default ip address, Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.2.1(assuming the default gateway address is 192.168.2.1)...Leave username blank & in password use admin in lower case...
    Click on the router Status tab and check for Internet/WAN IP Address, however you cannot change the WAN IP Address if it is Dynamic as it changes automatically...If you have Static IP Address then you need to ask your ISP to change the WAN IP address...You can indeed change the LAN IP Address of your router...

  • Aaa network access restrictions with secure authen (asa device)

    Hi all,
    I've been reading a lot about how to configure the cut-through-proxy to allow certain network traffic only after being authenticated. The procedures seem pretty straightforward when using plain telnet or ftp (works pretty good).
    However, doing so securely seems to be a bit more "fuzzy".
    I don't like the idea of authenticating users over clear text telnet or ftp, and https has its own issues (weird timeouts that i can't seem to figure out).
    Is it not possible to simply log in to the ASA (or whatever) device securely (ssh?), to authenticate and authorize other network traffic?
    I see people talking about ssh not being proxy-able. I do not want to "proxy" the ssh connection, i just want to tell the ASA:
    "Hey, this is me, allow me this (acl) traffic when i'm coming from this IP address, for X minutes or untill i log off again. Please.".
    Sounds simple to me. :-)
    Perhaps i'm looking at the wrong thing? Perhaps i do not need the cut-through-proxy for this?
    I've been looking at articles like this:
    https://supportforums.cisco.com/docs/DOC-14842
    And some of Cisco's ASA AAA articles, like this:
    http://www.cisco.com/en/US/docs/security/asa/asa82/configuration/guide/access_fwaaa.html
    They all pretty much seems to do what i want, except that they seem to want to "proxy" my traffic for some reason, and authenticate me in clear-text.
    Do i have any other options? Like logging on directly to the device to do the authentication?
    Using fixed or named access lists or even downloadable access lists doesn't really matter, i would just like a secure way of activating those access lists.
    I'm currently investigating my options, like using a VPN client or script some acl injection, but that just sounds so disturbing.
    Thanks a lot.
    /Sune T.

    I have never done it with Cisco ACS so I can not offer much support on this.
    However, I've done it many times on Cisco Freeware TACACS+ and it is very easy.
    1- in Cisco Freeware tacacs, include "max-session = 1" under either the user
    profile or group file definition.
    2- in the router itself, you need to enable "ip finger". This will allow the
    TACACS+ server to querry the router everytime there is a new attempt to loggin.
    If you already have a session to the router, TACACS+ server will see this and
    reject a new session for that same user. If the login ID is different than what
    is already connected to the router, it will then be accepted:
    C7140#who
    Line User Host(s) Idle Location
    0 con 0 idle 11w2d
    * 2 vty 0 cciesec idle 00:00:00 192.168.15.9
    Interface User Mode Idle Peer Address
    C7140#
    Now if user "cciesec" tries to login again through another session, it will
    be rejected by the TACACS server:
    [root@LinuxES-lab1 root]# finger @192.168.15.1
    Line User Host(s) Idle Location
    0 con 0 idle 11w2d
    2 vty 0 cciesec idle 00:04:00 192.168.15.9
    * 3 vty 1 idle 00:00:00 192.168.128.100
    Interface User Mode Idle Peer Address
    [root@LinuxES-lab1 root]#
    Easy right?

  • Network Address Restriction

    Hi, I set up the directory server for testing purposes. I created a single user. and I tried to set an ACI for that user so that he could only login via a certain IP. This never seems to be enforced. I also want to limit concurrent connections. Where is this done?
    Is there something I must do to make this aci enforced? I have a simple C LDAP program for debugging, it and any LDAP client I try always succeeds at bind, even tho the IP I'm connecting from is not the IP in my ACI.
    Thanks

    I never tried using ACI for access restriction. However, if your plan is to limit the access from certain IP, you can config it using Proxy server. You can just create a network group (allowed_group) and assign it to the specifiy group, then you can create another network group (deny_group) to deny all the IP access. Be sure to put allowed_group as the first in your list so it will have toppest priority.
    When incoming binding happends, Proxy server will check if the IP belongs to allowed_group, if yes, pass. If not, check against the second group: deny_group. Because the second group will deny all IP access, the access will be denied
    I am not sure if this can help you. However, I wish it gives some tips.

  • Flex 4: How 2 Set Application Height/Width with Script?

    I am new to Flex 4 and going through the 3 to 4 migration pain.
    I need to set the size of my application programmatically. In Flex 3, I did it this way:
    mx.core.Application.application.width  = theWidth; (equivalent for height).
    I can not figure out how to do this with Flex 4. Searched high and low.
    Help, please! TIA
    Bruce

    You can use this.height and this.width properties.

  • I would like to reset my iPhone but it has asked me for a restriction code I have never set one and I have tried everything I can think of I was wondering if there was a specific code ????

    Help me I have been trying to restore my iphone back to original settings an very time I try it asked me for a restriction code I have never set a restriction code and was just wondering if they were all the same for every iPhone please could someone help me

    - Restore from a backup that was make before you added the Restrictions passcode. If you restore from a backup made with the Restrictions passcode the Restrictions passcode is also restored.
    - Restore to factory settings/new iPod.
    - If you are up to it see:
    How to reset forgotten Restrictions...: Apple Support Communities
    Some other uses have experienced a Restructuions passcode just appearing out of thin air. Try passwords you use on the iPhone.

  • IP address restrictions not working with bea weblogic plugin

    We want to implement IP address restrictions via the Sun Java One Web Server admin tool for our application. We are using the Sun Java One Web Server to proxy requests via the Bea Weblogic plugin. However, we cannot get IP address restrictions to work because of the leading asterisk in the following NSAPI entry for PPATH of obj.conf :
    <Object name="weblogic" ppath="*/cmcsr/*"> Service fn="wl_proxy" WebLogicCluster="10.156.20.11:9010,\
    10.156.20.12:9010,10.156.20.13:9010" DynamicServerList="OFF"
    </Object>
    Has anyone gotten IP restrictions to work with the bea Weblogic NSAPI plugin?

    I'm not sure what you're asking, but each Service directive should be on its own line. It is an error to have both a <Client> tag and Service directive on a single line.

  • Domain authentication with mac address restrictions

    I am in a branch office and I have one WLC 5508 and one ACS 4.2 with three WLANs:
    WLAN1 with SSID1: for company computers and laptops
    WLAN2 with SSID2: for ipads and tablets
    WLAN3 with SSID3:  for guests
    I am asked to configure WLAN2 as “WLAN2: Provides the Wi-Fi connectivity to ipads and tablets, with back end security using domain authentication with mac address restrictions.

    You would need to create a seperate policy and be able to have a seperation between the two policies... It's kind of hard to explain, but you would have for example:
    Policy 1:
    Wireless user on this SSID WLAN1
    AD on this AD Group (Machine)
    Policy 2:
    Wireless user on this SSID WLAN 2
    AD on this AD Group (USer)
    Thanks,
    Scott
    *****Help out other by using the rating system and marking answered questions as "Answered"*****

  • HT1595 My apple tv stuck at setting date and time. Also when connecting yo network doesn't ask for network password

    My apple tv stuck at setting date and time. Also when connecting yo network doesn't ask for network password

    I just went through this last night. (Aug 15, 2013)
    What I did to get back up and running. This is not the first time I have lost the network connection with my Apple TV 3
    Products effected: Apple TV 3 and Home Sharing (My Apple TV 1 was not effected)
    Power down (unplug) the Apple TV and power down your router ( in my case, it is a FIOS router, flipping the on/off works fine).
    Power both items back up.
    At this point, I usually can reenter my Apple ID and PW. and reconnect Home Sharing.  But for some reason I was unable to reconnect last night but was able to get it reconnected in the morning. I was jut to tired to deal with it last night.
    A new issue that is was able to fix after a good nights sleep.
    I did figure out, (after trying to reenter my ID and PW many times and having it tell me that my ID and PW was wrong), that when using the Apple TV on screen keypad to type in the user ID. DO NOT use the ".com" keypad button. Instead type out each character for .com. ( or what ever ending you use for your ID account.)
    Once I typed out my full ID and PW. everything is back to 100%

  • I have an Apple ID with a single  e mail address. I want to set multiple addresses in the same ID. Can I? If so how?

    I have an Apple ID with a single  e mail address. I want to set multiple addresses in the same ID. Can I? If so how?

    Howdy there johnzcarp,
    As I understand it you want to have more than 1 email address under your Apple ID. You can have what are called Alternate Email addresses associated with your Apple ID and this article will help you get those setup:
    Manage your Apple ID primary, rescue, alternate, and notification email addresses
    Alternate email address
    You can add one or more alternate email addresses for use with Apple services such as Game Center, FaceTime, Find My Friends, iMessage, and OS X notifications.
    Go to My Apple ID (appleid.apple.com).
    Select “Manage your Apple ID” and sign in.
    Add an alternate address:
    Select Add Email Address, then enter your alternate address. Apple will send a verification email to that address. Didn't receive the email?
    Follow the instructions in the email to verify the address.
    Edit an alternate address:
    Select Edit next to the address, then enter the new address. Apple will send a verification email to that address. Didn't receive the email?
    Follow the instructions in the email to verify the address.
    Delete an alternate address: Select Delete next to the address.
    Thank you for using Apple Support Communities.
    Take care,
    Sterling

  • Im having problems with my Kids facetime accounts that seem to be because they are both using my itunes and there are conflicts with multiple email addresses? Is it possible to now set the kids up with their own accounts without losing their apps etc

    Hi All,
    I have my kids using iTunes via thier ipods etc through my own account and this hase been the case for some time?
    This has started to cause issues lately with imessaging and facetime, as there seems to be a limit on email addresses that can be associated with one account?
    I wonder if I would be best off setting the kids up with their own accounts, but want to be able to do this without them losing their existing apps, music etc?
    Is this possible, if so is there a simple process cos I can seem to find anything relating to this?
    many thanks, Jim

    Not going to happen the way you want it to.
    When you add a gift card balance to the Apple ID, it's available for the Apple ID.
    Probably best to create unique Apple ID's for each... this will also make things easier in the future as purchases are eternally tied to the Apple ID they were purchased with.

  • I have an airport express and want to know how to set up two different wireless networks. One with 5GHZ and one with 2.4GHZ so different devices can connect to either.

    I have an airport express and want to know how to set up two different wireless networks. One with 5GHZ and one with 2.4GHZ so different devices can connect to either. I have an iphone 4 that will not connect to 5ghz.
    thank you!

    Your AirPort Express is already providing two separate 2.4 GHz and 5 GHz bands, but each band is using the same wireless network name.
    This is the default setup for the AirPort Express, which is recommended for most users. The theory here is that devices will automatically connect to the best quality signal based on their capabilities and distance in relation to the AirPort Express.
    It is possible to assign a different name to the 5 GHz band, and then "point" devices at that network to connect. Some users swear by this option.....(I am not one of them).... but you might want to give it a try to see how it works for you.
    Open Macintosh HD > Applications > Utilities > AirPort Utility
    Click on the AirPort Express
    Click Edit in the smaller window that appears
    Click the Wireless tab at the top of the next window
    Click Wireless Options near the bottom of the next window
    Enter a check mark next to 5 GHz Name.....which will automatically add "5 GHz" to the network name....so you can identify it
    Click Save, then click Update and wait a full minute for the Express to restart
    Now you will need to "point" your 5 GHz capable devices at the 5 GHz network name.  2.4 GHz devices will connect to your "other" network name.

  • My iPad, Macbook and Apple TV are all set up with the same iCloud email address.  I bought the iPhone 6 and accidentally set the iCloud up with a different email.  My phone will not let me change the email address to be the same as my other devices,

    My iPad, Macbook and Apple TV are all set up with the same iCloud email address.  I bought the iPhone 6 and accidentally set the iCloud up with a different email.  My phone will not let me change the email address to be the same as my other devices, it tells me that email is already being used. How do I delete the iPhones iCloud account and reinstall it to match my other devices.

    Yes it will, just sign out, then sign back in with the correct address.
    Settings>iCloud>Sign Out.

  • How can I change the email address associated with my iCloud account?Ask your question.

    How can I change the email address associated with my iCloud account?

    sschultz365 wrote:
    When my iPhone updated, it reloaded an old email address as my iCloud address and I don't know the password associated with that email address.  How do I delete the old account and set up a new one with my new email?
    To change the iCloud ID ("email address") you have to go to Settings>iCloud, tap Delete Account, provide the password for the old ID when prompted to turn off Find My iDevice, then sign back in with the ID you wish to use.  When you do this you may find that the password for your old ID isn't accepted.  If this should happen, and if your old ID is an earlier version of your current ID, you need to temporarily recreate your old ID by going to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID.  Click edit next to the primary email account, change it back to your old email address and save the change.  Then edit the name of the account to change it back to your old email address.  You can now use your current password to turn off Find My iDevice on your device, even though it prompts you for the password for your old account ID. Then save any photo stream photos that you wish to keep to your camera roll.  When finished go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud).  Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was.  Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

Maybe you are looking for