Asking again:  how to get live internet radio on the mac actually be live??

The software on my mac seems to treat certain audio broadcasts as podcasts rather than live broadcasts so that when it finishes a clip, it restarts it and plays it again. Is there a way to actually get the mac to play broadcasts as live and not keep recycling a broadcast as a clip?

Where are you playing from?
iTunes Radio? or a website?
From websites. The problem doesn't seem to happen when I use iTunes but it doesn't seem that every station's internet can be opened through iTunes. Or is there a way in fact to do that?

Similar Messages

  • "Is their a way to stream live internet radio on the ipod touch?"

    "Is their a way to stream live internet radio on the ipod touch?"

    I use This one, but it's limited to Clear-Channel stations.
    As deggie said, there are a lot of them now.
    Scott

  • Does any one know how to get smileys for Facebook on the mac,, i see people using them all the time and don't know how to do it,,,

    I know this is a bit of a strange question, but i have seen people using the smileys on face book, but every time i try to get them they dont work, i was just wondering if any one knew how, i thought i would put it on here as i have got a lot of helpful tips on here for alot of problems and you guys know what you are talking about,,,

    not 100% sure what you mean
    smileys are a sequence of chars like ;-¶ which the internet site or program like a chat program replace with an image typically a small gif image
    is your problem that you want to save those images to your harddisk?
    is your problem that you wish some other program then facebook to replace the smiley chars with the images that facebook use?
    is your problem that when you type on facebook your smileys are not replaced with the same images as others (in which case you should prob as which signs they type)

  • Although my ipod shows the number of steps, calories, and time, it no longer is saving it to the history. also when I open the history it takes me to May 2010 instead of the current date. Any ideas on how to get it to start recording the history again?

    Although my ipod shows the number of steps, calories, and time, it no longer is saving it to the history. Also when I open the history it takes me to May 2010 instead of the current date. Any ideas on how to get it to start recording the history again?

    Try:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable                     
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar
    The missing apps could have been done by setting the Restrictions that can hid those apps. If the backup was made with those retrictions set the the Restrictions are also restored.
    Thus, if you get it to work restore to factory settings/new iPod, not from backup                               
    You can redownload most iTunes purchases by:        
      Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • Can't figure out how to get on internet. says no ip address.

    can't figure out how to get on internet. says no ip address.

    Call your internet service provider.

  • HT1222 My phone is telling me about a Software Update but for the first time it is asking me for a passcode, I have never set up a passcode and do not know how to get around this to do the upgrade?

    My phone is telling me about a Software Update 7.1.1 but for the first time it is asking me for a passcode, I have never set up a passcode and do not know how to get around this to do the upgrade?

    See if this helps:
    iOS: Forgotten passcode or device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212

  • I see this was not answered or any info on the web site so I will ask again "How do I completely remove CC from my computer"

    I see this was not answered or any info on the web site so I will ask again "How do I completely remove CC from my computer"?
    And don't talk about CC cleaner.
    Howard

    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    http://support.apple.com/kb/HT1923

  • HELP! I need help to understand how to get value on radio buttons!

    hello,
    I realy need the help from anyone that knows how to get value from radio buttons in a JSP.
    I have this :
    <%
    java.util.Vector vLinha = (java.util.Vector) datos.get("ConsNefect");
              java.util.Hashtable ordens;
              java.util.Enumeration eLinha = vLinha.elements();
              String t = "radio";
              String x = "escolha";
              String l = "";
    int i = 0;
              //int esc = 0;
    String fila = "";                         
              boolean bol = true;
    while (eLinha.hasMoreElements())
    ordens = (com.ibm.dse.base.Hashtable) eLinha.nextElement();     
              if (++i%2 == 0)
    fila = "formgriscla";
    else
    fila = "formgrisosc";
    out.println("<tr>");
    out.println("<td class=\"" + fila + "\">");
    out.print("<p class=\"dato2\">");          
              out.print("<a href=" + urls.get("action"));
         out.print("&sequencia=" + (String) ordens.get("sequencia"));                    
         out.print(">");
              out.print((String) ordens.get("descricao"));
         out.print("</a></p></td>");
              out.println("<td class=\"" + fila + "\">");
    out.print("<p class=\"datop\">");          
              out.print((String) ordens.get("datap"));
    out.print("</p>");
    out.println("<td class=\"" + fila + "\">");
    out.print("<p class=\"datop\">");
    out.print((String) ordens.get("erro"));
              out.print("</p>");
              out.println("<td class=\"" + fila + "\">");
              out.print("<p class=\"datop\">");     
              l = (String) ordens.get("sequencia");     
              out.println("<input type=\"" + t + "\" name=\"" + x + "\" value=\"" + l + "\">");          
              out.print("</p></td>");      
              out.println("</tr>");
              //esc++;
    %>
    <!--input type="Hidden" name="escolha" value=<!--%l%>-->
    <!--input type="Hidden" name="escolha" value="<!--%=escolha%>"-->
    </td>
    </tr>
    I don�t know how to take the value... PLEASE HELP ME OUT!
    THANKS TO ALL!,
    Best wishes,
    Alex (portugal)

    You must wrap your contents into a FORM element and, then, using getParameter("escolha"), retrieve your value.

  • Live internet radio to my home stereo

    Is there away to play live internet radio to my home stereo like I do with itunes.  My airport is already connected  to my stereo. So I just need away to stream it to my airport.

    Go through setup mentioned here
    http://www.apple.com/airportexpress/setup.html
    it should show up in the bottom of the iTunes window as shown here
    http://www.apple.com/airportexpress/features/airplay.html

  • How do I access internet radio stations in iTunes 11

    In the previous version of itunes, you could listen to internet radio.  In the new version this seems to have been eliminated on the ipad.  Is that correct, or maybe I just can't find it.

    There was never Internet radio on the iPad. Now there is iTunes Radio but it is only available in the. U.S. at this time.

  • I use the "Bootcamp" on my Mac to work between Mac and Windows. How do I get my iTunes music from the Mac side of my hard drive to the Windows side?

    I use my "Bootcamp" harddrive to work on both the Mac side and Windows7 side of my computer. How do I get my Itunes Library from the Mac side to the Windows side of my Mac Book Pro?

    Time Capsule is for backing up your data. It's not really a solution for live file storage; using it will not reduce the bloat of your boot volume.
    If you have a lot of movies, music, etc. in your iTunes Library, that can be a good thing to move to an external drive. Here's how:
    http://support.apple.com/kb/ht1449
    After you follow those instructions to copy your media over to the external drive and point iTunes to it, you can delete it from your internal drive.

  • The bottom bar on my mail has disappeared which means I can't create, reply or forward to an email. Any ideas how to get it back? Touching the screen at the bottom doesn't work!

    The bottom bar in my email seems to have disappeared which means I can't create, reply or forward any emails. Any auggestions to how to get it back? Touching the bottom of the screen doesn't work. Thanks.

    Close all apps in the Multitasking Drawer; Double Tap Home Button to open drawer, Swipe up on each app to close it. Repeat until all apps are closed, touch home screen.
    Restart phone, hold both Home and Power/Sleep buttons down at the same time, continue to hold them down until the Apple Logo appears, Release both buttons and wait for phone to restart.
    Check email app to see if bottom bar and new email icon have come back.
    If not, delete the email account in settings and then add it back in again.
    If mail still not working as it should, you may try doing a Reset All Settings reset in Settings => General => Reset => Reset All Settings.  You won't lose any data, music, apps, videos,pictures, etc.  But you will have to go back in and turn on or off any settings you changed on your phone because everything will be set back to factory defaults.

  • Updating firmware when I can't get an internet connection through the router

    I am trying to update the firmware for WRT54G V8, but some of the instructions indicate I need to have the router connected and be connected to the internet.  I cannot get an internet connection through the router.  Can I upgrade firmware without being connected to the internet through the router.  (I have had this router for about a year and a half with no problems until now.)

    Yes, you can upgrade the firmware without an Internet connection.
    To upgrade the firmware, first download the new firmware into a computer that you can wire to your router.
    Next, power down your entire network.
    Then wire the computer to a LAN port on the router.
    Disconnect all other wires from the router.
    Power up the router and allow it to fully boot (1-2 minutes).
    Power up your computer.
    Login to the router, and do the firmware upgrade  (it will likely take several minutes).
    Power down your entire network.
    Next you need to reset the router to factory defaults.
    To reset your router to factory defaults, use the following procedure:
    1) Power down all computers, the router, and the modem, and unplug them from the wall.
    2) Disconnect all wires from the router.
    3) Power up the router and allow it to fully boot (1-2 minutes).
    4) Press and hold the reset button for 30 seconds, then release it, then let the router reset and reboot (2-3 minutes).
    5) Power down the router.
    6) Connect one computer by wire to port 1 on the router (NOT to the internet port).
    7) Power up the router and allow it to fully boot (1-2 minutes).
    8) Power up the computer (if the computer has a wireless card, make sure it is off).
    9) Try to ping the router. To do this, click the "Start" button > All Programs > Accessories > Command Prompt. A black DOS box will appear. Enter the following: "ping 192.168.1.1" (no quotes), and hit the Enter key. You will see 3 or 4 lines that start either with "Reply from ... " or "Request timed out." If you see "Reply from ...", your computer has found your router.
    10) Open your browser and point it to 192.168.1.1. This will take you to your router's login page. Leave the user name blank, and in the password field, enter "admin" (with no quotes). This will take you to your router setup page. Note the version number of your firmware (usually listed near upper right corner of screen). Exit your browser.
    If you get this far without problems, try the setup disk (or setup the router manually, if you prefer), and see if you can get your router setup and working.
    If you cannot get "Reply from ..." in step 9 above, your router is likely dead. Report back with this problem
    If you get a reply in step 9, but cannot complete step 10, then either your router is dead or the firmware is corrupt. Report back with this problem.
    If you need additional help, please state your ISP, the make and model of your modem, your router's firmware version, and the results of steps 9 and 10. Also, if you get any error messages, copy them exactly and report back.
    Please let me know how things turn out for you.

  • How do i copy internet images to my mac desktop

    how do i copy internet images to my mac?

    A related tip: option+shift+4 will produce a cursor where you can drag a box to grab a screen image of an area.  It gets dumped to your desktop with a generic name.
    For that file too, you have to decide its ultimate destiny. 

  • How do I set up my AT&T mobile internet device on the Mac? Each time I go to the network set up, I don't have an option to select the device, only WiFi.

    How do I set up my AT&T mobile internet device on the Mac? Each time I go to the network set up, I don't have an option to select the device, only WiFi.

    Are you getting Airport confused with Airplay? 
    Secondly, I don't think a Mac can be used as an Airplay receiver.  You'll need an Apple TV for that.  There are third-party software packages that can turn your computer in to an Airplay receiver, but I'm not sure what the rules are about mentioning them here on Apple's forums. 
    Hint: google "airplay software"

Maybe you are looking for

  • IMac grey screen with external HDD attached

    I used to have unibody Macbook with externall USB HDD (containing Time Machine and some free space) attached to it. Today I have 2011 iMac but now if HDD is connected via USB, computer will stay at gray screen (after DVD drive noises). If I disconnec

  • BI Unicode Conversion impact on Microsft office tools

    Hello Friends, The BI version is BI 7.0, but we are using both Bex 3.x and Bex 7.0.BI 7.0 is being Unicode converted. Questions Does Unicode conversion have any impact on running the new/existing reports in 3.x and 7.x Does Unicode conversion have an

  • Requires a user to input a date (condition [%0])

    Hi,  I'm trying to write a query that requires a user to input a date (condition [%0]).  The data brought back would show invoices with activity but I need to get only the invoices that are 60 days past due from the date the user inputs. --SELECT T0.

  • Restore in-app purchase after country/region change

    Please let me get to the point: The scenario is I got an app from country X and made some in-app purchases for additional functions. Then I moved my account to country Y. If I happen to delete this app and later install it again, can I restore the in

  • Correct Serial Number

    I just purchased Elements 13 from Costco.  I'm trying to install it but the serial number that is on the sticker on back of the box has 18 digits and the installation screen is asking me for a serial number that is 24 digits long.  I tried other idea