Asking for help with syncing mail account

I just add a new mail account (exchange) than i want sync it on to my ipad, but under sync mail option, the exchange account was not even there
i dont know why, i have try quiting itunes and mail, but that doesnt work, so i try re booting the mac, it is not working as well
do anyone have a solution to the problem?
P.S. itunes 10.4

Add the Exchange account directly on the iPad. It doesn't go through iTunes. Settings>Mail,Contacts, Calendar

Similar Messages

Asking for help with importing mail messages into Entourage?

I just started using Entourage and want to import the messages saved in folders in Mac Mail to Entourage. When I select Import from a program in Entourage, Mac Mail isn't listed. Any thoughts on how to important these email messages into Entourage?
Thank you.

I was able to resolve the matter from an extra found on the MS Office CD. Thank you.
http://www.kbalertz.com/kbNamed_273841/This.article.describes.create.MBOX.files. Microsoft.Entourage.back.message.Note.This.feature.only.applies.message.used.wit h.Address.Notes.aspx

Even I cant believe this is happening again! i'm once again asking for help with my account. Since im very sick I ask that u look into my account and read the hell verizon has put me through and assist ending the hell once and for all even if that means

Even I cant believe this is happening again! i'm once again asking for help with my account. Since im very sick I ask that u look into my account and read the hell verizon has put me through and assist ending the hell once and for all even if that means ending my contract, i just want the hell over. I went into my bill tonight and the mess was still there I paid $110. that's what I owe

I guess I spoke too soon! I really can't believe this nightmare is not over yet! My account is still wrong. The credit that I was due totaled $63.00 I am looking at a message on my phone saying that $21.01 was credited which makes my balance $219.72. I received a text the following day that says, I processed your credit of $30.00 and your new balance $216.73 how is that possible? None of the late fees were credited and the amount due for my monthly charges are wrong. Before any changes were made to my data plan back in Nov. My monthly charges were $140.00, I needed my hot spot back and i was told that the hot spot will increase my bill $10 for each phone that totals $20. The customer rep that change my data plan at that time also gave me a credit of $20 to compensate for the increase until I had time to talk with customer service about the mix-up with my Hot spot. I originally had the hot spot, but the rep that change my plan almost a year prior told me nothing was changing except I was getting more for less money. I explained to that rep that I need my hot spot 4 times a year...and I don't want my plan to have any changes. To verify what I'm telling u check my account and see that I called from Albany New York wanting to know where my hot spot was and I was told I didn't have the hot spot on my account since the last data change! I lost money once again due to the verizon rep's. so my current data plan the rep promised would increase $20 which makes my monthly charges that were $140 prior to the change $160 after the hot spot was returned to my account. Then I was given a $12 credit per month for 12 months because of so many mistakes made to my account so with that $12 credit my monthly charges should $148 + surcharges + taxes and that's not what I see. I do know this much right now my account is in such a shambles I can hardly see the light at the end if there is an end! I need real help!
>> Personal information removed by Verizon Moderator to comply with the Verizon Wireless Terms of Service <<

Where should one ask for help with a thread ???

Having posted a link to this thread because the op needed someone to check a site in Panther.... and because not so long ago I read here that this was the place to ask for such help.....
I now find the my request has been removed... musta offended the tou of course.
Sooo - how should a person try to get help with a thread in future? - we ain't all l4's and have a lounge to play in.

Interesting question. This forum was available for this type of request at certain points in Discussions' history, and it has often been recommended that users post issues like yours here.
Technically, as per the red print at the top of this forum, it is inappropriate to use this forum for that purpose. In the case you cite, I'd recommend putting a new topic in to the Safari forum with a specific request for the help that is required in the Subject line. If you do it that way, you will most likely reach more users who will be able to help you.
Good luck.

Ask for help with LabView Daq and Tek VX4244 VX4101

I use NI VIO-MXI-64XE-10, Tek VX4101 and Tek VX4244 to acquire data in one
Tek 1410A VXI mainframe connected a PII 350/64M computer with MXI2
cable.these modules are used for three independent applications,the datum
are acquired and through preliminary computation, then sent to three TCP/IP
ports the computer served in real time. the burden of the system will be
very heavy because the 64XE-10 need to use up the 100K sample rate
continuously dealed by 50 channels,and the VX4244 need about 30Hz for all 16
channels.
64XE-10 is easily detected by NI software, and I can use LabView Daq
intermediate analog input VIs to acquire data in background, read 50 samples
and compute the mean for each channel,then packa
ge the 50 mean and send to
client end with 40 times a second. I found the speed is satisfactory.
As for VX4244 and VX4101,I can't use LabView Daq VIs,and the driving
functions for LabView with the product are difficult to understand, I want
to know how I can get data and send out efficiently,how to get data in
background,and how to use FDC ?
And for 64XE-10, although the speed is satisfactory, but it use much more
CPU resource, I want to use advanced analog input VIs to build the code,I
want to know where I can find examples using the advanced analog input VIs ?
Best Regards

I use NI VIO-MXI-64XE-10, Tek VX4101 and Tek VX4244 to acquire data in one
Tek 1410A VXI mainframe connected a PII 350/64M computer with MXI2
cable.these modules are used for three independent applications,the datum
are acquired and through preliminary computation, then sent to three TCP/IP
ports the computer served in real time. the burden of the system will be
very heavy because the 64XE-10 need to use up the 100K sample rate
continuously dealed by 50 channels,and the VX4244 need about 30Hz for all 16
channels.
64XE-10 is easily detected by NI software, and I can use LabView Daq
intermediate analog input VIs to acquire data in background, read 50 samples
and compute the mean for each channel,then packa
ge the 50 mean and send to
client end with 40 times a second. I found the speed is satisfactory.
As for VX4244 and VX4101,I can't use LabView Daq VIs,and the driving
functions for LabView with the product are difficult to understand, I want
to know how I can get data and send out efficiently,how to get data in
background,and how to use FDC ?
And for 64XE-10, although the speed is satisfactory, but it use much more
CPU resource, I want to use advanced analog input VIs to build the code,I
want to know where I can find examples using the advanced analog input VIs ?
Best Regards

Mail, iPhoto keeps asking for old non-listed mail account password

My mother took over my old mac pro computer with OS Lion. She created a new account on the computer for herself. The problem is that the mail keeps requesting for a password for my gmail account. We looked into the account listing (in system preferences and in mail preference) and it only lists her own email - not mine. I have program specific password activated on my gmail. But the thing is, why is it requesting my gmail password (which btw is not working). She can't use iphoto to send pictures to other people or use mail becuase this password request keeps showing up and it won't send anything. It says password is invalid. It does seem to recive her own mail however.
Help, please?
What should we do?

In Mail Preferences / Accounts, check the entry for outgoing mail server. You're able to choose different outgoing servers, which may be the issue. This may help:
http://support.apple.com/kb/ht1277

Help with multiple Mail accounts

There are two user accounts on my computer. I am the administrator and recently set-up a .Mac email-only account for the secondary user.
Now, in the Mail application, I am receiving the mail for both myself AND the secondary user in my box. How do I set up the Mail for account #2 so it is totally seperate from my own?
Thanks.
iMac G5 Mac OS X (10.4.5)

Is this email only account (not an alias account)
available in the Mail application as a separate
account under your admin login account?
Yes, I believe so. When I'm logged in as admin, I can see both accounts in preferences. Is that what you mean?
Since an email only account is created as a separate
email account in Mail, I don't know how you would be
receiving messages addressed to the email only
account unless you also created the account in Mail
under your login account.
That's likely what happened. How can I fix? Should I delete the second account created under my admin login and re-create it somewhere else?
iMac G5 Mac OS X (10.4.5)

New to Mac and am asking for help with Safari issue.

I have a Mac book Pro and recently upgraded to 'Lion'. I am having an issue with Safari hiding the area to type in a web address, it seems to hide this feature. It also seems to hide the green, Amber (minimize buttin), and Red (close) icons. I need to know how to reset Safari to its oringinal layout. My 'Guest account is fine and have no idea why the settings have changed in my user account. I was told new software for Safari was available and so attempted to download it, which caused the mac to freeze. I rebooted but this software will still not download without freezing up. If anyone has anyway of walking me through this I would be incredibly gratefull.

In Safari it has no 'Show toolbard" A friend of mine already suggested that. It doesnt have that option. I know that sounds odd. In the guest user I have that option but on my account I dont. I really appreciate you taking the time to answer. Do you have any other ideas on what this might be? When you go up to the top and the arrown 'rolls' over the top on the tool bar the address tab drops down, how to i make its stayopen in this posision?

Can you tell me how I can ask for help with the following Indesign question: I am a new Indesign user and a Creative Cloud member. I was using the Window/Pages drop down window to view my pages alphabetically or by page number and also to determine whet

I am a new Indesign user and a Creative Cloud member. I was using the Window/Pages drop down window to view my pages alphabetically or by page number and also to determine whether or not my JPEG files were sufficiently HI-Res for the printer. I don't know how I did it but somehow the window has changed so that now it does not have the alphabetical/numerical/Hi-Res information. It just shows the pages in a two page spread in numerical order. How can I restore the window so that I will be able to view the information as I did previously.
Your help will be appreciated,
Don Unwin
[Personal Information Removed]

The pages panel is not the place where you see this information. You can customize the Links panel to show all sorts of things, including the page number, effective and actual ppi, and whether the link is OK or needs updating.

Asking for help with purchase of Macbook Pro

Hi all,
I am looking to buy a 15" Macbook Pro for my 15-year old daughter. The configuration I have found is:
2.4GHz Intel Core i7 Quad-Core
4GB of DDR3 RAM
750GB 5400rpm Hard Drive
AMD Radeon HD 6770M 1GB Graphics
15.4" LED-Backlit Glossy Display
1400 x 900 Native Resolution
Slot-Loading SuperDrive
802.11a/b/g/n Wi-Fi, Bluetooth 2.1+EDR
FaceTime HD Camera, Built-in Microphone
May Ship with OS X Lion or Mountain Lion
Obviously for a teenager she will be using it for facetime and the like. It would also be used for school work and games. She is not a big gamer, but does like the Sims 3.
My first question is are the specs ok? And other than the memory, which I plan to upgrade to 8, is ther anything I should look for? Is 2.4 ghz enough or do I need to get a faster processor?
Thank you in advance,
George

It appears that you have selected a refurbished late 2011 MBP. About three weeks ago I got may late 2011 17" refurbished MBP. Excellent machine and it is the third refurbished one I have gotten. I consider that a fiscally prudent approach in purchasing a MBP.
The MBP that you have chosen is a good performer and the addition of RAM is a wise move. I think your daughter should be just fine with this unit.
Mt Lion is new to me and there are several aspects that do not thrill me. If the MBP is shipped with Lion, do not be in a rush to upgrade but DO get the upgrade code so that if you do decide later to install the new OS, you will not have to pay for it. Just to be on the safe side, query Apple support if there is a time limit to redeem the code.
Ciao.

Where is the button called "tools" that Firefox keeps refering to when I ask for help with something?

In order follow their directions for some help, I am told to use a button called "tools". Where is the darn thing?

OH! There it is!! I knew it was a simple quest. Just can't get my head around everything this century requires in order to function effectively. whew. Thanks again, woof,
Susan

Can't believe I have to ask for help with this

I cannot change the mail view to show the mail at top and message at the bottom. The only way I can open a message is to double click, which is really annoying. I looked in mail help and it tells me that the way I want it is the default view, but if I want a new window to double click.
Any help? I am sure to feel foolish after the answer.
thanks

Just grab it and slide it up.
...or double click on the slider bar, and adjust the size of the preview pane to your desires by sliding as recommended by deh2k.
;~)

Ask for help with form based authentication & authorization

Hi:
I encountered the following problem when I tried the form based authentication & authorization (see the attached part of the config files, web.xml, weblogic.xml & weblogic.properties)
1. authorization seems not invoked against the rules specfied, it doesn't go the login error page as long as the user/pwd match, even though the user does not have the necessary role
in the example below, user3 should be denied to access the signin page, but seems no login error page returned, actually I never see any page / error message which complain about the authorization / access control error
2. after authenticate correctly, always get redirected to the / (context root) url, instead of the url prior the login page, for e.g., signin page
Any idea ?
Thanks in advance.
HaiMing
attach config files
web.xml
<security-constraint>
<web-resource-collection>
<web-resource-name>MySecureBit1</web-resource-name>
<description>no description</description>
<url-pattern>/control/signin</url-pattern>
<http-method>POST</http-method>
<http-method>GET</http-method>
</web-resource-collection>
</security-constraint>
<login-config>
<auth-method>FORM</auth-method>
<realm-name>default</realm-name>
<form-login-config>
<form-login-page>/control/formbasedlogin</form-login-page>
<form-error-page>/control/formbasedloginerror</form-error-page>
</form-login-config>
</login-config>
<security-role>
<description>the customer role</description>
<role-name>customer</role-name>
</security-role>
weblogic.xml
<security-role-assignment>
<role-name>
customer
</role-name>
<principal-name>
customer_group
</security-role-assignment>
weblogic.properties
weblogic.password.user1=user1pass
weblogic.password.user2=user2pass
weblogic.password.user3=user3pass
weblogic.security.group.customer_group=user1,user2

Hi, Paul:
Thanks a lot for your reply.
Firstly let me just correct a little in the attachment I put previously, I think I missed following lines :
<auth-constraint>
<description>no description</description>
<role-name>customer</role-name>
</auth-constraint>
So, user1 & user2 are in the customer group, but user3 not, and /control/singin is protected by this security constraint, as a result, when anyone click the link to /control/singin, he was led to the login page, if he tries to login as user1 & user2, he should pass & led to original page (in this case /control/singin, and my code's logic, once /control/signin is used, means that he already login successfully & redirected to the login success page), but if he tries to login as user3, he should only pass the authentication check, but fail the authorization check, and led to login error page.
What not happen are :
1. user1 & user2 pass, but redirect to /
2. user3 also pass, because I see that debug message shows also get redirected to /, instead of login error page
(login error page will be displayed, only if I try to login as a user with either wrong userid, or wrong password)
3. one more thing I notice after I first time post the message, the container does not remember the principal, after 1. is done, not even for a while
And the similar configuration works under Tomcat 3.2.1, for all 3. mentioned above.
Any idea ?
HaiMing
"Paul Patrick" <[email protected]> wrote:
If I understand what your trying to do, everyone should get access to the
login page since roles are not
associated with principals until after they authenticate. If I follow what
you specified in the XML files,
authenticated users user1 and user2 are members of a group called
customer_group.
The principal customer_group (and therefore its members) is mapped in the
weblogic.xml file to the role
customer.
I can't speak to the reason your being redirected to the document root.
Paul Patrick
"HaiMing" <[email protected]> wrote in message
news:[email protected]...
Hi:
I encountered the following problem when I tried the form basedauthentication & authorization (see the attached part of the config files,
web.xml, weblogic.xml & weblogic.properties)
1. authorization seems not invoked against the rules specfied, itdoesn't go the login error page as long as the user/pwd match, even though
the user does not have the necessary role
in the example below, user3 should be denied to access the signinpage, but seems no login error page returned, actually I never see any page
/ error message which complain about the authorization / access control
error
2. after authenticate correctly, always get redirected to the / (contextroot) url, instead of the url prior the login page, for e.g., signin page
Any idea ?
Thanks in advance.
HaiMing
attach config files
web.xml
<security-constraint>
<web-resource-collection>
<web-resource-name>MySecureBit1</web-resource-name>
<description>no description</description>
<url-pattern>/control/signin</url-pattern>
<http-method>POST</http-method>
<http-method>GET</http-method>
</web-resource-collection>
</security-constraint>
<login-config>
<auth-method>FORM</auth-method>
<realm-name>default</realm-name>
<form-login-config>
<form-login-page>/control/formbasedlogin</form-login-page>
<form-error-page>/control/formbasedloginerror</form-error-page>
</form-login-config>
</login-config>
<security-role>
<description>the customer role</description>
<role-name>customer</role-name>
</security-role>
weblogic.xml
<security-role-assignment>
<role-name>
customer
</role-name>
<principal-name>
customer_group
</security-role-assignment>
weblogic.properties
weblogic.password.user1=user1pass
weblogic.password.user2=user2pass
weblogic.password.user3=user3pass
weblogic.security.group.customer_group=user1,user2

Asking for help with my animation

First, I want to thanks to those that take time to answer and help. I solved the problem of my shivering images, setting the fps to 30. Now, if someone can help me with this: I need to make a sequence of images (6) flow along the screen continuously. I don't know how to join the last image with the first as a non stop smoothy loop. I know there is a way using the action-scrip window, but I don't remember much because I have not been using this app much lately. Thank you.

Place the images in separate layers
Then you take the half part of the last image animation to the starting of frame
Or placing the half part of the first animation to the last frames

I just asked for help with the problem that ebay is my home page and firefox 7 will not load ebay, but will load all other sites. Then it sends me on this loop back to this same page with no help. I'm not all that computer literate, and I need help!!!

The problem is simply this...www.ebay.com/ is my homepage. But, Firefox 7 can't load ebay, for some reason on my computer. I have checked other computers, and ebay is working. My computer loads all other sites.

Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies"
*https://support.mozilla.org/kb/clear-cache-history-and-personal-information

Asking for help with syncing mail account

Similar Messages

Maybe you are looking for