Asking for opinion 2: sound

As a professional musician, I currently planning a video. I use a Panasonic NV 300 (I know, that´s not professional equipment, but..) I record sound with two Neumann microphones, using a tascam interface.
I will then syncronize the various clips. Then I will put the audio together (as I would as a CD) and lay the respective clips over the audio. I know that requires very accurate documentation (which sound clip belongs to the audio I chose). I plan to work with Garage Band (I have already made recordings with GB, examples here: http://web.mac.com/stahlchristian/DuoLaVigna/Klangbeispiele/Klangbeispiele.html
Is that a lot easier with FCE, or don´t the multiply video tracks help over the one track in iMovie06.
Opinions?

I don't see how multiple video tracks are going to help you here. Multiple audio tracks might.

Similar Messages

Cannot delete the Folder on the desktop after Mavericks update. when I try to delete it, it is asking for logon password, When I give the logon password, it plays a sound of moving to Trash, but the folder still remains on the desktop

Cannot delete the Folder on the desktop after Mavericks update. when I try to delete it, it is asking for logon password, When I give the logon password, it plays a sound of moving to Trash, but the folder still remains on the desktop
Please help

It is a folder which I have created. Name is "SAP".
I copied some of my office stuff and then deleted the contents inside the folder. But I couldnt delete the folder SAP.
This is happening after the Mavericks update.

The Elements 12 Mac disk works fin - I also have a Dell, and the Windows disk will not run at all, sounds like it's grinding, and is almost impossible to remove from the hard drive. I cannot find any place to tell me who to CALL to ask for a replacement!

The Elements 12 Mac disk works fine - I also have a Dell, and the Windows disk will not run at all, sounds like it's grinding, and is almost impossible to remove from the hard drive. I cannot find any place to tell me who to CALL to ask for a replacement!

Hi Samcat,
You can use a download instead of the disk as an alternative: Adobe - Download free trial version Adobe Photoshop Elements 12 | Adobe you can license with your serial
Please test the disk in another windows machine to check if it's caused by the drive or the disk. If you tested with 2 drives please start a support case, i assume Adobe will only provide downloads at this point. They are the same as the trials. If you still need a disk you can burn the trial to a disk as a backup disk. Good luck!

Hi i have asked for this help before and it was fixed but cant remember how to do it My ipad has lost sound in certain apps and general typing i remember fixing it through the settings can any one please help it not the mute

Hi I have had this problem before butr cant remember how to fix it . What has happened is certain apps have no sound where as others do I also have no sound when typing.I remember when i last asked for help with this problem it was done through settings. It not on mute Please help me.

You can enable keyboard sounds via Settings > General > Sounds . If they are enabled but you can't hear them then have you checked that you haven't got notifications muted (which will also affect most apps) ?
Depending on what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you can mute notifications by the switch on the right hand side of the iPad, or via the taskbar : double-click the home button; slide from the left; and it's the icon far left; press home again to exit the taskbar. The function that isn't on the side switch is set via the taskbar instead : http://support.apple.com/kb/HT4085

When trying to update apps it asks for account password but it doesn't show my account. Help!

When trying to update apps it asks for account password but it doesn't show my account ID, it shows my dad's. How can I fix this so I can sign in?

It sounds like the apps were purchased using your dads account, so they will have to be updated using that account.

Itunes keeps asking for me to authorize purchased songs again and again

I placed all my songs on an external harddrive. Then I got a new computer. I am now using a Vista machine with an Intel Dual Processor. I placed the songs on a new internal harddrive using SATA. I reinstalled Itunes, etc. Now, whenever I ask for a song purchased from Itunes to play, it says that the machine is not authorized to play the song. So I put in my password and a prompt comes up indicating that my machine is now authorized to play the song. I push okay. The song does not play. If I push the play button, a new prompt comes up saying agin that my machine is not authorized to play the song. I then put in the password and a new prompt says that my machine is now authorized to play. I again push okay, but the song does not play and I do this again and again and again.
I have tried to get rid of the sd file. I have tried changing my password. I have tried changing my ID. I have never changed my account. It's always been the same one since I joined Itunes in 2004 or 2005. I have purchased 280 songs since then, so I'm really upset that I can't access those purchased songs. Everything that is not purchased works fine.
I should say that my new computer stutters sound and video a little bit. I've done some things to minimize that but it still happens. I don't know if the two are related.

If you've done all the steps in this article,
http://docs.info.apple.com/article.html?artnum=306424
contact iTunes store support at the bottom of this page
http://www.apple.com/support/itunes/store/authorization/

When I try to open an .ai/pdf file received through my email, it won't open and asks for a password. I have never set up any kind of password for email security, but have tried typing in my standard passwords. Nothing works. I wonder if it has anything to

When I try to open an .ai/pdf file received through my email, it won't open and asks for a password. I have never set up any kind of password for email security, but have tried typing in my standard passwords. Nothing works. I wonder if it has anything to do with the use of my Wacom3 Tablet...I've been having trouble with it and was getting the same message when trying to open the User's Manual in my Applications/WacomTablet file on my hard drive. Any suggestions? I just downloaded the latest version for the Wacom and recently upgraded to Snow Leopard 10.6.7 (which I hate, and my CS3 hates, etc.)

It sounds like you have a a password-protected PDF. The password was set by the person who encoded it.

Icloud is asking for my pw for backup - both Apple Id and pw and have changed and they are not asking for my new?

Received an email from Apple concerning my AOL email not being valid
after March 31 and instructions how to convert to another active email
address - new apple id and pw updated yesterday. Now when I go
on my iphone, icloud asks me for pw to old aol email ID - which I have
forgotten - but that is not now the current Apple Id for my ITunes account.
Not sure how to change it on my phone - when I try to sign out of icloud
so I can go back in and re-enter info, it asks for pw to shut off find my
iphone and I have forgotten the pw. Thanks for any help!

Hello there RmCrCo,
it sounds like you need to reset the password for the account you have signed in on your phone you should be able to get that reset wiht this article:
iCloud: Change your iCloud password
Thank you for using Apple Support Communities.
Take care,
Sterling

I purchased photoshop elements 8 on line in 2010. I recently switched to a new desktop computer. Photoshop asked for my serial number. I entered the correct serial number (obtained from Adobe). It says it is invalid. How do I get this corrected so I can u

I purchased photoshop elements 8 on line in 2010. I recently switched to a new desktop computer. Photoshop asked for my serial number. I entered the correct serial number (obtained from Adobe). It says it is invalid. How do I get this corrected so I can use the product I purchased?

Hi Rosera,
This is bad and I am sorry to hear that you are running into these issues.
Let me connect with you, so right now, the current state is that you have installed copy of PSE 8 in trial on your windows 7 machine, and when you are trying to enter the serial number from your PSE 8 Box, it is saying the serial number to be invalid?
It might sound pretty obvious, but please make sure that you are entering the serial number correctly and of PSE 8(in case you bought a PEPE box)?
Have you tried the steps mentioned below by Barbara?
If possible, you can send me the serial number through PRIVATE MESSAGE and I can check it on my end that whether the serial number is indeed invalid or that the issue is with your machine?
Regards,
Ankush

Apple, I downloaded a app from tongbu (minecraft pe) and it ask for my Apple ID details and then the app crashed I am scared that it will get my Apple ID and use it on my credit card please tell me what should I do but I don't want to factory reset .

Hi I downladed minecraft of tongbu, and it asked for Apple ID, it crashed I think it is used to get Apple ID and use it on MY credit card please tell me what to do. I do not want to factory reset because I have a lot of gaming progress, tell me what should I do, I beg you.

Hello there wkertisrags,
It sounds like you are concerned about your Apple ID security. I would start by resetting your Apple ID password with this article:
Apple ID: Changing your password
http://support.apple.com/kb/ht5624
You can also add some enhanced security with Two-Step Verification, and here is some more information on that:
Frequently asked questions about two-step verification for Apple ID
http://support.apple.com/kb/ht5570
If you feel your account data or security has been compromised you may want to reach out to our Account Security team with this article:
Apple ID: Contacting Apple for help with Apple ID account security
http://support.apple.com/kb/HT5699
Thank you for using Apple Support Communities.
Take care,
Sterling

SharePoint 2013 - Asking for password with NTLM

Hi All,
We have deployed a web application using NTLM with single sign on. It’s a secure site and in IIS bindings we have SSL certificate attached with this web application. However, many users are keep getting windows authentication prompt as shown:
There are lot of blog posts that solve the issue by adjust IE settings >> Security >>
Sites >> Advanced >> and added the site URL and
Security
>>   Local Intranet >> Custom Level >> At bottom choose “Automatic logon with current username and password”
http://blog.fpweb.net/sharepoint-credentials-prompt-quick-tip/#.VPBz3vmUdUW http://www.sharepointdiary.com/2012/04/sharepoint-keeps-asking-for-password.html
https://sysadminspot.com/windows/google-chrome-and-ntlm-auto-logon-using-windows-authentication/ (IE, Chrome, Firefox)
http://social.education.purdue.edu/edit/2011/03/sharepoint-pw-prompts/
I have tested the blogs posts and change the settings in our development environment
and no windows authentication was shown with my username on the SharePoint 2013 environment. But, all related to change IE settings. In our organization, we have around
2000 users. It be impractical to set for users for these IE settings and network team regularly pushes group polices.
Q: Is some configuration has to be set on IIS or
some settings on SharePoint that users don’t get windows authentication? I have tried most of options but could not resolve this issue.
Any pointers would be greatly appreciated.
Cheers,
Aroh Shukla

Sites go into the Intranet Zone, not the Trusted Zone. Only Intranet is configured, by default, to automatically pass credentials to SharePoint.
Yes, there are scenarios where this may not work, e.g. if you've configured the Web Application with Kerberos but didn't configure the SPN. Or if you're using Kerberos Constrained Delegation with Domain Controllers older than Server 2012 and your users are
in a different forest, etc.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

I just rented a film using my apple TV and was then asked to enter a code - which I haven't been asked for in long time. I have forgotten the code. Any quick solutions to the problem?

I just rented a film using my apple TV and was then asked to enter a code - which I haven't been asked for in long time. I have forgotten the code. Any quick solutions to the problem?

Hello anetsa
It sounds like you have restrictions setup on your Apple TV. If you do not know your passcode to unlock it, then you will need to restore your Apple TV. Check out the articles below for more information about Restrictions as well as restoring your Apple TV.
Apple TV: Understanding Restrictions (parental controls)
http://support.apple.com/kb/HT200198
Apple TV (2nd and 3rd generation): Restoring your Apple TV
http://support.apple.com/kb/HT4367
Regards,
-Norm G.

Never recvd verification code, in PHOTOMAIL dialog box it is asking for one when trying to email pictures,never saw any codes when setting this up

verification code, never received it when setting up contacts to email pictures, in PHOTOMAIL dialog box it is asking for one to verify my email address and said it was sent to my email, went back and checked and there wasn't anything there, where is it or what do I need to do now????

Does the account you are using have admin rights? I found this :
http://support.apple.com/kb/HT2397
+In Mac OS X 10.3 Panther and later, users with administrative privileges aren't prompted to change the region the very first time a DVD-Video disc of a single region is inserted. Instead, the region of the DVD drive is automatically set to the region of the DVD disc that was inserted. Accounts that don't have administrative privileges must authenticate with an administrator account name and password, because changing the drive's region code requires administrative privileges.+
Sounds like it might be worth a try from an admin account first.

My wrt160n is starting to have a lot of problems.. should i ask for a replacement??

i had no problems before with this router. but lately i'm noticing a lot. first, it started to reset itself. all my setting went back to default and was configured for open access (unsecured wireless connection). this happened a few times last week. i had to configure my settings again and again and again.
second, my wrt160n wifi LEDs keeps on blinking. even when no wifi devices are accessing it. i checked the client table on the setup page and i see no devices listed. how come the wifi LEDs are still blinking??
third, i noticed that my bittorrent dl speed went down. i can't reach top dl speed unlike before. and my network connection on bittorrent is always red or orange. it takes a long time before it turns green(Network OK). i'm actually downloading an episode of heroes right now with hundreds of seeders and peers and i'm only getting 15kB/s!! i had way less seeders before and i still get top dl speed. now with even more seeders I GET LOWER DL SPEED!! EVEN WHEN THE NETWORK CONNECTION ALREADY TURNED GREEN.. WHAT THE HELL??!!
can someone please tell me if my wrt160n router is already defective?? i already tried upgrading the firmware, but nothing happened. is there any kind of setting i should be doing, or does it sound like my router is already defective and i should ask for a replacement??
help please anyone..
any help, info, and suggestions would be very much appreciated.
thanks.

richard804 wrote:
It is not your router. It is your ISP lowering the speed of your torrents.
i don't think its my isp. i'm getting good results now from my router. i don't know how i did it but my router seems to be working fine now. i'm getting top dl speeds and it stopped from resetting itself.
one last problem though. is it normal for the wireless lan LED to be blinking all the time even though there's no wifi device accessing it??
it was'nt like that before. it never blinks when all our laptops are turned off. but lately it never stops blinking even with all the laptops turned off. i always check my client table at the settings page and i'm the only one accessing the router thru a wired connection (no wifi devices).
does it sound like my router has a problem?? or is it normal for the wireless LED to be blinking non-stop??
what do you guys think??
tia.

My CS 6 is asking for a serial number and I already entered it twice. Is it due to me installing Adobe CC?

First off, my computer had to be wiped clean back in early January. All my programs was gone and that included my CS6 program. So I re-installed them. Then one day, I see this Adobe update and it had the Adobe Creative Cloud App. I think I did something stupid and I wanted to tryout not only the Lightroom version, but Photoshop CC as well. My CS6 already had a Photoshop on it. I thought it would be a separated (you know, a separated program on one side and the other one on one side) and not interfere with my CS6 program. Now it's asking for a serial number and whenever I input my serial number (oh by the way, I got CS6 through my school by online; so I got a non disc version) it saying my serial number experied. So here's my questions:
1. If I remove the Adobe CC app off my computer, would the cc versions of my CS6 programs go away?
2. How many time can you installed the non disc version of CS6?
3. Cont. from the first question; If I re install CS6 and uninstalled the CC app would that help?
I know I sound almost computer illiterate, but I need help with this issues. I am college student, and I can't afford one CS6 program, rather alone the whole CS6 and I really need that suite in order to complete my assignments while at home. What do I do?

Sign in, activation, or connection errors | CS5.5 and later
Mylenium

Asking for opinion 2: sound

Similar Messages

Maybe you are looking for