ASM 10gr2/RHEL4 Unable to load oracleasm

Hi,
I have seen many threads on this, but no resolution. Please help.
uname -r is -> 2.6.9-5.EL
[oracle@localhost ~]$ /etc/init.d/oracleasm configure
Configuring the Oracle ASM library driver.
This will configure the on-boot properties of the Oracle ASM library
driver. The following questions will determine whether the driver is
loaded on boot and what permissions it will have. The current values
will be shown in brackets ('[]'). Hitting <ENTER> without typing an
answer will keep that current value. Ctrl-C will abort.
Default user to own the driver interface [oracle]:
Default group to own the driver interface [oracle]:
Start Oracle ASM library driver on boot (y/n) [y]:
Fix permissions of Oracle ASM disks on boot (y/n) [y]:
Writing Oracle ASM library driver configuration: [ OK ]
Loading module "oracleasm": Unable to load module "oracleasm"
[FAILED]
[oracle@localhost ~]$ /etc/init.d/oracleasm enable
Writing Oracle ASM library driver configuration: [ OK ]
Loading module "oracleasm": Unable to load module "oracleasm"
[FAILED]
[oracle@localhost ~]$ /etc/init.d/oracleasm start
Loading module "oracleasm": Unable to load module "oracleasm"
[FAILED]
The /var.log/messges is following:
Oct 3 13:11:05 localhost oracleasm: succeeded
Oct 3 13:11:05 localhost modprobe: FATAL: Module oracleasm not found.
Oct 3 13:11:05 localhost oracleasm: Unable failed
And I am using the most recent asmlib downloaded from ORN for RehHat Linux 4.
No problems installing rpms.
Thanks
Sam

And I am using the most recent asmlib downloaded from ORN for RehHat Linux 4.
No problems installing rpms.You do not want the most recent version of the {font:Courier}oracleasm{font} package: you want the one that exactly matches your kernel version:
oracleasm-$(uname -r)You do want the latest versions of the user-space helpers:
oracleasm-support
oracleasmlib

Similar Messages

Loading module "oracleasm": Unable to load module "oracleasm"

Hi,
I'm trying to install ASM Library RPMs.But the oracleasm configure is failing with the following error:
Default user to own the driver interface [507]:
Default group to own the driver interface [507]:
Start Oracle ASM library driver on boot (y/n) [y]:
Fix permissions of Oracle ASM disks on boot (y/n) [y]:
Writing Oracle ASM library driver configuration: [ OK ]
Loading module "oracleasm": Unable to load module "oracleasm"
[FAILED]
the following are the RPM version details:
[root@narya tmp]# ls oracleasm-2.6.9-5.0.5.EL*
oracleasm-2.6.9-5.0.5.ELsmp-2.0.0-1.i686.rpm
[root@narya tmp]# ls
oracleasmlib-2.0.2-1.i386.rpm
oracleasm-support-2.0.3-1.i386.rpm
the following are the kernel version details for my machine:
[root@narya tmp]# uname -r
2.6.9-5.0.5.EL_snaresmp
Please do let me know if i'm installing the right RPMs and if not please provide me the link for the right RPMs.
Thanks in advance!!!

Are you running this on RHEL4?
If so, this error could be caused by SELinux. If SELinux is enabled, it can prevent the successful load of the ASMLIB driver. This is documented in Bug 4758215.
If you see an error message similar to the following in your /var/log/messages file:
modprobe: FATAL: Error inserting oracleasm: Permission Denied
then it is likely that SELinux is enabled and this is preventing the module from being loaded.
The solution suggested by Oracle is to either disable SELinux or upgrade to RHEL 4 Update 3 as a fix for this bug is incorporated into this release.

Unable to load module "oracleasm" on z/os

I am trying to install Oracle 10.2 on Linux on IBM z/os.
I am having a problem with using asm.
The following is a screen shot of what I did:
linux:~ # id oracle
uid=103(oracle) gid=105(oinstall) groups=105(oinstall),6(disk),106(dba)
linux:~ # /etc/init.d/oracleasm configure
Configuring the Oracle ASM library driver.
This will configure the on-boot properties of the Oracle ASM library
driver. The following questions will determine whether the driver is
loaded on boot and what permissions it will have. The current values
will be shown in brackets ('[]'). Hitting <ENTER> without typing an
answer will keep that current value. Ctrl-C will abort.
Default user to own the driver interface []: 103
Default group to own the driver interface []: 105
Start Oracle ASM library driver on boot (y/n) [n]: y
Fix permissions of Oracle ASM disks on boot (y/n) [y]: y
Writing Oracle ASM library driver configuration: done
Creating /dev/oracleasm mount point: done
Loading module "oracleasm": Unable to load module "oracleasm"
failed
linux:~ # rpm -qa | grep asm
oracleasm-2.6.16.21-0.8-default-2.0.3-1
oracleasm-support-2.0.3-1
oracleasmlib-2.0.2-1
linux:~ # uname -r
2.6.16.21-0.8-default
linux:~ #
What am I missing since I cannot load module oracleasm.
Thanks.

if versions and arch match,
please check messages file while trying to load oracleasm,
e.g. on RH4, it is known oracleasm has problems loading if SELinux is enabled
guido

Upgrade RHEL4.1+Ora10.1.0.5+ASM -TO-- RHEL4.3+Ora10.2.0.3+ASM

Original(current) System
===================
box - IBM x225 model 8685 crx
$ rpm -qa |grep oracleasm
oracleasmlib-2.0.0-1
oracleasm-2.6.9-11.ELsmp-2.0.0-1
oracleasm-support-2.0.0-1
$uname -a
Linux xyz.abc.com 2.6.9-11.ELsmp #1 SMP Fri May 20 18:26:27 EDT 2005 i686 i686 i386 GNU/Linux
Plan 1 = We are planning to upgrade our OS and ASM to RHEL4.3+Ora10.1.0.5+ASM-2.6.9-34.
Plan 2 = Once the above is done, we will upgrade to Oracle 10.2.0.3
Will appreciate very much if someone can provide some helpful info/hint/URL for this upgrade.
Mainly I have concerns on the ASM side such as:
(a) How will I relink the ASM to existing Oracle (after the OS upgrade)?
(b) In case I need to go back and boot the OS with old version, what precausions I need to take?
thanks in advance,
regards,
Lily

I will download the new kernel version of ASMLib before the upgrade. But is there any specific task/precaution needed for ASM relink? Any document would be much appreciated in this regard.
Lily

Help / Configure PHP+IIS+Oracle "Unable to load dynamic library....."

Hello,
I am a seasoned Oracle user and PHP developer and for the life of me I cannot get our development server to load the php_oci8.dll file. I have spent hours searching the web, the Oracle forums and reading the FAQs and can still not get the web server to load correctly. Below are some specs about the environment we are running:
-OS: Win2k Server SP4
-Web Server: IIS 5.0
-PHP Version: 5.1.4 PHP
-Full Oracle Admin 10gr2 client is installed on web server
When I pull up a page, I get the following warning: "PHP Warning: PHP Startup: Unable to load dynamic library 'D:\temp\php_oci8.dll' - The specified module could not be found. in Unknown on line 0 "
Here is what I have done to troubleshoot:
-'everyone' user has full access to the extension directory
-I have tried moving the php_oci8.dll to other directories and changing the extension_dir in my php.ini
-I am confident that my extension_dir in the ini file is correct
-I have tried the Oracle instant client and the full admin OEM client. The machine currently has the full OEM client installed
-All environment variables appear to be correct
I rarely post to forums but I am running out of options. If I cannot figure this out soon, we will have to go another route for resolution. Any help is tremendously appreciated.
Dave.
[email protected]
Message was edited by:
user527623

Should I explicity create environment variables named: ORACLE_HOME and NLS_LANGYep, you need to create those specific variables.
Nooooo don't use ODBC!!!!
Actually, I don't really care either way, I'm pretty much technology agnostic. Different things have different uses and you have to pick the best tool for the job. If I was a zealot I'd say "Don't use IIS" :p
~Jer

Open Directory: "Unable to load replica list"

I'm currently running Mavericks Server 3.1 on my Mac Mini at the home network. I had some issues with the client logins and went for local accounts on the clients instead. Today I finally wanted to fix the problem and go all Open Directory. But the Open Directory service was shut off when I opened the server software. I tried to turn it on but got a message saying "Unable to load replica list". I updated the software to the latest 3.1 but are still having the same issue. I never had any replica list, I only had a standard one from the start, but it seems I can't do anyhing there now.
LDAP log:
Mar 21 22:48:38 xxYY.com slapd[172]: @(#) $OpenLDAP: slapd 2.4.28 (Nov 12 2013 12:02:47) $
[email protected]:/private/var/tmp/OpenLDAP/OpenLDAP-491.1~1/servers/slapd
Mar 21 22:48:38 xxYY.com.com slapd[172]: daemon: SLAP_SOCK_INIT: dtblsize=8192
Mar 21 22:48:39 xxYY.com.com slapd[172]: TLS: found identity in keychain using identity preference.
Mar 21 22:48:42 xxYY.com.com slapd[172]: slap_add_listener: opened additional listener 'ldaps:///'
Mar 21 22:48:42 xxYY.com.com slapd[172]: bdb_monitor_db_open: monitoring disabled; configure monitor database to enable
Mar 21 22:48:44 xxYY.com.com slapd[172]: slapd starting
Mar 21 22:48:44 xxYY.com.com slapd[172]: daemon: posting com.apple.slapd.startup notification
Mar 21 22:48:54 xxYY.com.com slapd[172]: => bdb_idl_delete_key: c_del id failed: DB_LOCK_DEADLOCK: Locker killed to resolve a deadlock (-30994)
Mar 21 22:48:54 xxYY.com.com slapd[172]: conn=1022 op=3: attribute "entryCSN" index delete failure
Mar 21 22:50:02 xxYY.com.com slapd[172]: => bdb_idl_delete_key: c_get failed: DB_LOCK_DEADLOCK: Locker killed to resolve a deadlock (-30994)
Mar 21 22:50:02 xxYY.com.com slapd[172]: conn=1042 op=3: attribute "entryCSN" index delete failure
I don't understand any of this other than the obvious failure words. Can anyone understand this and help me here?

This procedure is a diagnostic test. It makes no changes to your data. If you have more than one user account, you must be logged in as an administrator to carry out these instructions.
Please triple-click anywhere in the line below on this page to select it:
sudo /usr/libexec/slapd -Tt | pbcopy
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing the key combination command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting. You'll be prompted for your login password. Nothing will be displayed when you type it. If you don’t have a login password, you’ll need to set one before you can run the command. You may get a one-time warning to be careful. Confirm. You don't need to post the warning.
If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator. Log in as one and start over.
Wait for a new line ending in a dollar sign ($) to appear below what you entered.
The output of the command will be automatically copied to the Clipboard. If the command produced no output, the Clipboard will be empty. Paste into a reply to this message.
The Terminal window doesn't show the output. Please don't copy anything from there.

Unable to load one or more of the requested types. Retrieve the LoaderExceptions property for more information.

Hi there,
I use visual studio community 2013 to develop app for office. When I create app project using template and directly run it, it shows me this error: Unable to load one or more of the requested types. Retrieve the LoaderExceptions property for more information.
Can anyone help? Thanks in advance.

Hi holm0104,
Did you add custom code into the project? Can you reproduce the issue in a new project without custom code?
If not, did you have issue when you create a normal web application?
Regards & Fei
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

"Unable to load one or more of the requested types. Retrieve the LoaderExceptions property for more information" while attempting to open UNIX/Linux monitor

We have upgraded our System Center to 2012 R2, and we cannot open any of the UNIX/Linux LogFile monitor property or the UNIX/Linux process monitor property for those monitors created prior to the upgrade. Error we get is below. Any assitance
appreciated.
Date: 9/30/2014 10:01:46 PM
Application: Operations Manager
Application Version: 7.1.10226.0
Severity: Error
Message:
System.Reflection.ReflectionTypeLoadException: Unable to load one or more of the requested types. Retrieve the LoaderExceptions property for more information.
   at System.Reflection.RuntimeAssembly._nLoad(AssemblyName fileName, String codeBase, Evidence assemblySecurity, RuntimeAssembly locationHint, StackCrawlMark& stackMark, IntPtr pPrivHostBinder, Boolean throwOnFileNotFound, Boolean forIntrospection,
Boolean suppressSecurityChecks)
   at System.Reflection.RuntimeAssembly.nLoad(AssemblyName fileName, String codeBase, Evidence assemblySecurity, RuntimeAssembly locationHint, StackCrawlMark& stackMark, IntPtr pPrivHostBinder, Boolean throwOnFileNotFound, Boolean forIntrospection,
Boolean suppressSecurityChecks)
   at System.Reflection.RuntimeAssembly.InternalLoadAssemblyName(AssemblyName assemblyRef, Evidence assemblySecurity, RuntimeAssembly reqAssembly, StackCrawlMark& stackMark, IntPtr pPrivHostBinder, Boolean throwOnFileNotFound, Boolean forIntrospection,
Boolean suppressSecurityChecks)
   at System.Reflection.RuntimeAssembly.InternalLoad(String assemblyString, Evidence assemblySecurity, StackCrawlMark& stackMark, IntPtr pPrivHostBinder, Boolean forIntrospection)
   at System.Reflection.RuntimeAssembly.InternalLoad(String assemblyString, Evidence assemblySecurity, StackCrawlMark& stackMark, Boolean forIntrospection)
   at System.Reflection.Assembly.Load(String assemblyString)
   at Microsoft.EnterpriseManagement.Internal.UI.Authoring.Extensibility.TypeContainer.get_ContainedType()
   at Microsoft.EnterpriseManagement.Internal.UI.Authoring.Extensibility.MomExtensionsCommon.AddTemplatePages(LaunchTemplateUIData launchData, Form form)
   at Microsoft.EnterpriseManagement.Internal.UI.Authoring.Extensibility.MomExtensionsCommon.Initialize(Object launchData, Form form)
   at Microsoft.EnterpriseManagement.Internal.UI.Authoring.Extensibility.MomExtensionsCommon.RunPrivate(Object[] userData)
   at Microsoft.EnterpriseManagement.Internal.UI.Authoring.Extensibility.MomExtensionsCommon.Run(Object[] userData)

It's possible the upgrade did not update everything properly as it looks like a dll mismatch or a missing file. I'd open a support ticket with MS and have a support engineer look at the upgrade logs. What version of SCOM did you upgrade from?
Regards,
-Steve

SWPM - System Copy - Assertion Failed Unable to load database

Hello again,
(already the next question form me, sorry for this
I am executing a sysetm copy (DB-refresh) on ASE using SWPM.
However, in "Configure Components" step I get the error: Assertion failed. Unable to load database <SID of Target Sysetm>.
Where else can I check for errors?
I think it is still something on which I already worked (with other thread).
In sapinst_dev.log I found this
TRACE 2015-03-25 11:05:00.320
SAPInst calls the LogInquirer. The output of the LogInquirer can be found in file sapinst_loginquirer.log.
TRACE 2015-03-25 11:05:06.122 [iaxxgenimp.cpp:638]
 CGuiEngineImp::showMessageBox()
<html> <head> </head> <body> An error occurred while processing option SAP Enhancement Package 1 for SAP N
etWeaver 7.3 > SAP ASE > System Copy > Target System > Standard System > Based on AS ABAP > Database Refresh or M
ove( Last error reported by the step: Assertion failed: Unable to load database <SID>.). You can now: <ul>
<li> Choose Retry to repeat the current step. </li> <li> Choose Log Files to get more inform
ation about the error. </li> <li> Stop the option and continue later. </li> </ul> Log files are written to /t
mp/sapinst_instdir/NW731/SYB/COPY/SYSTEM/STD/AS-ABAP/REF. </body></html>
TRACE 2015-03-25 11:05:06.124 [iaxxgenimp.cpp:1031]
 CGuiEngineImp::acceptAnswerForBlockingRequest
Waiting for an answer from GUI
In sapinst.log I found this:
ERROR 2015-03-25 11:04:59.573
FCO-00011 The step syb_step_setup_preload with step key |NW_ABAP_DB_DBRefresh|ind|ind|ind|ind|0|0|NW_ABAP_DB|ind
|ind|ind|ind|0|0|NW_CreateDBandLoad|ind|ind|ind|ind|createdbandload|0|NW_CreateDB|ind|ind|ind|ind|createdb|0|NW_S
YB_DB|ind|ind|ind|ind|SYB_DB_CONTEXT|0|syb_step_setup_preload was executed with status ERROR ( Last error reporte
d by the step: Assertion failed: Unable to load database <SID>.).
INFO 2015-03-25 11:04:59.772
Creating file /tmp/sapinst_instdir/NW731/SYB/COPY/SYSTEM/STD/AS-ABAP/REF/__instana_tmp.xml.
INFO 2015-03-25 11:05:00.307
Removed file /tmp/sapinst_instdir/NW731/SYB/COPY/SYSTEM/STD/AS-ABAP/REF/instslana.xml.
INFO 2015-03-25 11:05:00.308
Creating file /tmp/sapinst_instdir/NW731/SYB/COPY/SYSTEM/STD/AS-ABAP/REF/instslana.xml.

Hello Kiran,
I did a few tests again yesterday, and it was really a stupid mistake from myside.
The error message did mean, that there wasn't enough space.
It isn't the authority issue, it was a leak of space.
FYI, the complete DB-Size of Source System is required - NOT JUST RESERVED SPACE!!!
Thx for help and sorry for stealing your time :O

Hyperion Essbase Error: 1002097 Unable to load database [PlanType1]

Hello,
I am running Hyperion Essbase 9.2.0.3 version. This has happened 3 times now since last 2 weeks. I had to restore the APP folder from previous backup.
The message that i see is Error: 1002097 Unable to load database [PlanType1]
I have searched google and no luck. Anyone knows how to fix this or why we get this message. I don't want to restore from backup everytime.
Thanks
Azmat Bhatti

I think you have currepted backup.
Try run essmsh script to recover broken block's.
Backups - Files still locked after beginarchive

Torrentflux 2.4 (ADONewConnection: Unable to load database driver)

I'm trying to setup Torrentflux 2.4 on my server.
I used the torrentflux PKGBUILD vom AUR: http://aur.archlinux.org/packages.php?ID=1664
I set up Apache/MySQL/PHP following the guide. PHP test script is working fine:
<?php phpinfo(); ?>
I setup a symbolic link from /srv/http to my /opt/torrentflux
ls /srv/http/
insgesamt 4
-r--r--r-- 1 root root 20 6. Mär 21:23 test.php
lrwxrwxrwx 1 root root 17 6. Mär 21:07 torrentflux -> /opt/torrentflux/
When I try to open /torrentflux/login.php in my webbrowser it says
ADONewConnection: Unable to load database driver ''
I left the default in torrentflux' config.php:
$cfg["db_type"] = "mysql"; // mysql, postgres7, postgres8 view adodb/drivers/
ls /opt/torrentflux/adodb/drivers/
insgesamt 532
-r--r--r-- 1 root daemon 20476 6. Mär 20:44 adodb-mysql.inc.php
-r--r--r-- 1 root daemon 25340 6. Mär 20:44 adodb-mysqli.inc.php
-r--r--r-- 1 root daemon 3220 6. Mär 20:44 adodb-mysqlt.inc.php
I'm pretty new to the whole LAMP stuff, so can please any1 tell me what's going wrong?

Ok, some questions:
1. Did you enable mysql in php.ini?
http://wiki.archlinux.org/index.php/LAMP#MySQL
2. Did you read / follow the torrentflux installation guide included with the installation?
(if not, check here: http://www.torrentflux.com/)
3. I have not worked with the package from AUR, the package form the official site (again, http://www.torrentflux.com/) works well for me. Did you try this?

"Error 1002097 Unable to Load database" while starting an Essbase App.

Hello Essbase Experts,
I am getting below error while starting an Essbase Application:
"Error 1002097 Unable to Load database"
Below is an extract from the Essbase Application Log:
[2012-04-04T14:14:03.816-19:14] [RPA] [ESM-6] [ERROR] [32][] [ecid:1333566842161,0] [tid:2058170128] Unable to lock file
[SID/essbase/user_projects/epmsystem/EssbaseServer/essbaseserver1/app/RPA/RPA/RPA.esm]. Essbase will try again after a short
delay.
[2012-04-04T14:14:04.821-19:14] [RPA] [ESM-5] [ERROR] [32][] [ecid:1333566842161,0] [tid:2058170128] Unable to lock file
[SID/essbase/user_projects/epmsystem/EssbaseServer/essbaseserver1/app/RPA/RPA/RPA.esm]. Please make sure other processes do not
access Essbase files while Essbase server is running.
[2012-04-04T14:14:04.821-19:14] [RPA] [MBR-89] [WARNING] [1][] [ecid:1333566842161,0] [tid:2058170128] Unable to open
[SID/essbase/user_projects/epmsystem/EssbaseServer/essbaseserver1/app/RPA/RPA/RPA.esm] for database
[RPA][2012-04-04T14:14:04.821-19:14] [RPA] [SVR-97] [ERROR] [32][]
[ecid:1333566842161,0] [tid:2058170128] Unable to load database [RPA]
[2012-04-04T14:14:04.821-19:14] [RPA] [SVR-97] [ERROR] [32][]
[ecid:1333566842161,0] [tid:2058170128] Unable to load database []
[2012-04-04T14:14:04.835-19:14] [RPA] [SVR-97] [ERROR] [32][]
[ecid:1333566842161,0] [tid:2058170128] Unable to load database []
Please sugest pointers to start the application.
Thanks,
KK

*[2012-04-04T14:14:03.816-19:14] [RPA] [ESM-6] [ERROR] [32][] [ecid:1333566842161,0] [tid:2058170128] Unable to lock file*
Solution would be easy ...like if the Essbase Agent is stopped using the services.msc (services panal)on Windows while a process is currently running, or if there has been an abnormal termination of the Essbase Agent, orphaned ESSSVR processes can be left. Shuting down the Essbase server using ESSCMD or MaxL then Check Task Manager confirm the ESSBASE.exe process later by this ESSSVR.exe processes should end if still NO then Do an "End Process" on any ESSSVR.exe process that is still running. Start the Essbase service and start the application.
ESSSVR.exe is process which keep application Alive (bad thing is if u have many applications running similarlly u have same numbe of ESSSVr .exe will be running in task master ..but u cant find out which one belongs to which application :( )
Reasons
looking at your error i can say , First of all you need to know what is Lock in EAS ? and what locks exist
(right-click on Essbase Servername, EDIT->LOCK and EDIT->LOCKED OBJECTS, and if your database/outline appears in there, unlock it.)
Check any antivirus- and backup software that may be scanning / running on your Essbase folders as that can lock the files and any ESSSVR process stays when the Essbase Agent is stopped
More over another chance of getting error is when you have you page and index files in different location and rest otl, rep.csc script in another drive .. usually while taking back up in OTL,csc drive u do get created index file and page file even u have page and index file in diffrent drive so doe to this u get this error unable to load database
Hope this give u some idea

Error --1002097 Unable to load database

Hi,
Essbase version 7.
I am having a problem when I am trying to start database or running Essbase give me an Error: 1002097 Unable to load database.(error 1002097 is related to the db corrupt.) this is on PRD server.
we have 2 more server ,(.BS & Dev).
1.I copied the Db from the BS to PRD --- but the application and DB in the PRD system failed to start giving the same error 1002097 .
2.next i did was to migrated the same application from BS to Dev system which went fine and i can see the outline . Application is getting started in the DEV system .
3. Since it was okay in DEV. i migrated the application from BS TO PRD .it got migrated but it is not starting giving me the same error 1002097.
any help will be great.
thanks
ram
Thank you,

Re: How can we Restore a corrupted cube.

1002097 Unable to load database [Plan1]

Hi all,
I am not able to start the database from essbase. When i start the databse from app, I am getting below message from the panel.
server.XXXXAPP.Plan1     Get database properties     April 5, 2011 2:57:27 PM CAT     Failed
Error: 1002097 Unable to load database [Plan1]
Error: 1042015 Network error: Cannot Locate Connect Information For []
server.XXXXAPP.Plan1     Get database properties     April 5, 2011 2:57:36 PM CAT     Failed
Error: 1053001 Cannot open object file: C:\Hyperion\products\Essbase\EssbaseServer\app\XXXXAPP\Plan1\Plan1.esm
server.XXXXAPP.Plan1     Get database properties     April 5, 2011 2:57:36 PM CAT     Failed
Error: 1053001 Cannot open object file: C:\Hyperion\products\Essbase\EssbaseServer\app\XXXXAPP\Plan1\Plan1.esm
server.XXXXAPP.Plan1     Get database properties     April 5, 2011 2:57:40 PM CAT     Failed
Error: 1002097 Unable to load database [Plan1]
I tried deleting the app from essbase and create it from planning (through refreh/create) that is also giving me a olap planning exception "Unable to load database"
I can not open forms as well. it is giving me "Unable to obtain a connection to Hyperion Essbase. If this problem persists, please contact your administrator"
Any Help..?
Thanks !
Edited by: user8819264 on Apr 5, 2011 7:52 AM
Edited by: user8819264 on Apr 5, 2011 8:27 AM

Hi John,
Sry for the delayed reply. The issue was the same as you suggested. There were few esssvr processes running. I couldnt see that from the taskmanager i as was looking on the process that were running with the user i logged in. I could see all once i selected checkbox from "All users". Killed those services and now it is fine.
Thanks.

Error: Unable to Load Database

Anyone seen this error: "Unable to Load Database"? How to recover? A link or a page for me to read would work too. thx! James

The usual cause for this is that the database has become corrupted - or one or more key files was somehow deleted. Take a look at the application log and see if there is a more detailed message. Unfortunately, if the data has been corrupted, you will have to recover from backup, or rebuild your cube.To get the database started, you can go into the database directory and delete the *.ind, *.pag, *.tct, *.ind and *.esm files. This will allow the app to start, but the data will be GONE - you will HAVE to reload and calc it, or restore from backup.Regards,Jade--------------------------------Jade ColeSenior Business Intelligence ConsultantClarity [email protected]

ASM 10gr2/RHEL4 Unable to load oracleasm

Similar Messages

Maybe you are looking for