ASM candidate disks not found

Hi all,
I am trying to install 2-node 11gR2 RAC on CentOS 5.6 using VMWare Fusion. I'm in the middle of Grid Infrastructure installation and while choosing the ASM diskgroups I don't see any candidate disks but when I click on all disks i can see them but can't select them.
I tried installing the grid before and ended up with and issue running the root.sh on all the nodes so had to deconfigure the grid binaries using the rootcrs.pl and then deinstalled the grid software using the ./desintall utility.
I'm not sure what has went wrong now when tried installing again ...I ran the cluvfy utility ..it doesn't show any errors.
Any advice on this is appreciated
Thanks
Sarat

I tried this Thread but didnt work for me its the exact issue im facing ..as shown in this thread.. I ran the below commands on both the nodes
Reinstall Grid infrastructure ASM no cadiates.
dd if=/dev/zero of=/dev/diskname bs=1024 count=100
Edited by: 861173 on Aug 26, 2011 11:24 PM

Similar Messages

Asm candidate disk not listed in the OUI grid infrastructure

I am installing 11g R2 two node RAC on OEL 5. 4.and openfiler
In the middle of the GRID infrastructure installation,at the window "Create ASM Disks", the disks are not listed.
I have installed and configured Asm lib through configure command
I was able to list the disks with the below commands
1./etc/init.d/oracleasm listdisks it was listing
CRSVOL1
DATA1
FRAVOL1
2. /etc/init.d/oracleasm-discover ORCL:*
i was able to discover the disks
I had change the Discovery path in the "Create ASM Disks" to ORCL:* still it is not appearing
Any help is appreciated.
Dave

Hi,
You can change Discovery Path of ASM to : /dev/oracleasm/disks/*
It's same result and Oracle recommend do that in case of discover (ORCL:*) not working.
Check this note:
*FAQ ASMLIB CONFIGURE,VERIFY, TROUBLESHOOT [ID 359266.1]*
Put here output of :
strace -f -o asm_discover.out /etc/init.d/oracleasm-discover 'ORCL:*'Regards,
Levi Pereira

IPod Classic 120GB cannot sync, "Required disk not found"

Somebody, please help! iPod Classic 120GB charcoal, current OS as of about a week ago (won't stay synced long enough for me to see what it is), iMac 24" 10.6.4, iTunes 10.0.1. Let me know if you need any more info and I'll try to provide it.
Everything was absolutely fine until I updated to the newest version of iTunes. Now, when I plug in my iPod, it says it's connecting then jumps straight to the "Okay to disconnect" screen. It never shows up in iTunes at all. After doing this repeatedly, I unplugged it then immediately plugged it in again before it had finished the progress bar on the "Okay to disconnect" screen, and it finally showed up in iTunes, but it gave me an error of "iPod was not properly disconnected" then "cannot sync - required disk not found" and disconnected itself again.
I tried resetting it (menu+center buttons) while it was plugged in, and this did nothing. iTunes still didn't recognize it at all.
About a week ago, I followed some instructions somewhere and toggled the "enable disk use" option (I usually keep it unchecked) then was able to restore it. The songs were added back in a bizarre order (not alphabetical, not chronological, songs within an album added out of order, jumping from artist to artist, etc.) and I had to sync it again for three random albums that it missed the first time, but once everything was in again it was fine. I haven't added any new songs or playlists to my iTunes library since then (just changed a few ratings and I like to keep track of play counts), but when I tried to sync it again this morning, I got exactly the same errors.
The only difference this time is that it alerted me that one song in my library (a song I happen to like very much) could not be synced. The song still shows up on my iPod, but will not play. It still appears and plays in iTunes on the computer.
The iPod works perfectly in day-to-day use and is a little over a year old. I take very good care of it (my previous iPod is four or five years old and still works fine) and it has never had any problems before this. It has almost 100GB worth of music (no other media, just music), which makes it pretty annoying to have to restore it more than absolutely necessary. What is going on here and is there some way to fix it that will last longer than a week?

Hi, yeah I'm experiencing the same issue as everyone else with a 120gb iPod classic using iTunes 10.1.1 (4). Started about the time of OSX 10.6.5 update and hasn't been resolved with the OSX 10.6.6 update.
iPod attempts to Sync but now quits without even appearing on the computer let alone iTunes.
I have ESET security but quitting the app doesn't help.
I also have an iPhone 3Gs and that's still syncing fine (thank heavens), via a different library.
I've since managed to wipe the iPod clean (back to factory settings) as forced to do so by following the instructions in another post to remove the iPod Photo Cache. I then moved my iTunes folder to another directory for safe keeping.
I set up a clean iTunes database thinking my old one might have been corrupted. To do this you open iTunes from scratch while holding down the option key and select "Create Library". iTunes then remembers the last library created whenever you open the app.
When I am able to see the iPod summary screen (a rare occurrence now) I see that "enable disk use" is checked ok - this has been noted as a problem in previous forums. So that's not the issue.
Actually the iPod doesn't even stay connected to my 2010 unibody MacBook Pro when the iPod is switched over to disc mode. It immediately goes into "OK to Disconnect".
So I now have a clean iPod, and clean iTunes - all empty and essentially useless!
Anybody out there with any ideas? Plllleeeeeeeese?

Hard disk Not found Error

My computer suddenly after working properly the day before, started displaying an error that says hard disk Not found. It is not booting up to windows aince the hard disk has been disconnected in some way. It is still under the hp manufacturers warranty till auguat of 2015, so would I be able to send it in for either a device replacement or a service order to correct the error. Also there is a small crack in the body near the charging port, but that is from a drop from eariler. Please get back to me as soon as possible, my son needs to use this for his computer science class.

You should contact HP directly to arrange to have the notebook sent in for warranty repair.
Use one of the contact options described in the web page at the following URL.
https://support.hp.com/us-en/contact-hp/product/HP-Pavilion-13-a000-x360-Convertible-PC/6936239/mode...
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Satellite P200-1EE - Hard disk not found if I try to install XP

Hi and I have a problem.
I recently bought a Toshiba Satellite P200-1EE series laptop running (of all things) Vista and nothing but problems ever since so im trying to install XP professional and overwrite Vista.
But whenever I try to install it says "hard disk not found..... unable to access"
I've heard of problems like this before something like a "software block protocol"
Any suggestions?

Hi!
Why you dont search in the forum before you start a new topic?
I mean you will hundreds of threads about this issue here in the forum and you will find the solution of your problem in few minutes.
Well, the reason for this is because you need the SATA drivers before you can install Windows XP. As far as I know your notebook is equipped with an Intel chipset and so you need the Intel Storage Manager. You can integrate the drivers using an external FDD or nLite [www.nliteos.com]. Furthermore this document could be useful for you:
http://aps2.toshiba-tro.de/kb0/HTD9401AN0000R01.htm
If you have more questions, please use the forum search!!!
Bye

Time machine fails backing up with a "backup disk not found" error after upgrade to Lion 10.7.2

Time machine fails backing up with a "backup disk not found" error after upgrade to Lion 10.7.2. I've erased and reformatted the drive; reconnected Time Machine(it saw it) and began a new backup. The backup starts again but fails before completing with backup drive not found error. I used the 10.7.2 combo update. Any help on how to fix this problem would be appreciated.

Arghhhhhhhhhhhhhhhhhhh!!!!!!
After waiting since October for a fix, I have now upgraded the firmware on the Time Capsule and installed the new Airport Utility, released yesterday, and the situation is even worse.
Up until now, the Airport Utility had an option to disconnect all drives manually and the Time Capsule would then work until the next reboot – a temporary (?) work-around.
Now that option does not exist in the new-look Airport Utility. And the Airport Utility installation can’t be rolled back and the old utility won’t restore.
The sparesbundle is still not accessible. Anyone worked out a work-around in the new environment yet?
I have another Time Machine backup working fine to a trusty old Lacie Drive so erased the one on my Time Capsule to see if that works. I have renamed the Capsule and the Time Capsule Drive. But to build another full backup will take at least two days and I shall be away from tomorrow and am reluctant to leave the Capsule and computer up and running for a week. And I’ll bet the sparsbundle will still be nowhere to be found.
How can Apple screw up so badly when they are to become the richest company in the entire world and – soon – will have more cash in the bank than the entire United States? Can’t they afford someone who really can sort this out? Especially when a Firewire connected hard drive – my trusty and simple LaCie – works fine.
Words, almost, fail me.

I'm getting "Installer disk not found" message during boot camp 5 and windows 8 install on late 2011 MBP upgraded to Mavericks.

hello,
And thank you in advance.
I'm getting "Installer disk not found" message during boot camp 5 and windows 8 install on late 20011 MBP upgraded to OS X 10.9 Mavericks. Any ideas?
I've downloaded the Window support option software and the WindowSetupBox.exe and copied it to the USB drive. I tried to create an iso image from my Windows XP machine but recieved messages that Windows 8.1 could not run on XP. I've ordered the Windows 8.1 backup media.
Any way to proceed?
Thanks Tim

download the win 8 iso from here;
http://getintopc.com/softwares/operating-systems/download-windows-8-pro/
then start over. install on to your usb along with the support software.

Installer disk not found message during boot camp 5 and windows 8 install on late 2001 MBP running Mavericks?

I'm getting "Installer disk not found" message during boot camp 5 and windows 8 install on late 2001 MBP running Mavericks. Any ideas?
I've downloaded the Window support option software and the WindowSetupBox.exe and copied it to the USB drive.
Thanks Tim

You might have better luck in the Boot Camp community. I'll ask the hosts to relocate your post.
Boot Camp Community

"Disk not found" and "No boot device found"

Please share any knowledge that may help in overcoming this problem. Installing Solaris 7 on Dell Precision 620, 933 Mhz, PIII. At the point where all systems seem about ready to go in completing interactive install, it comes back with "Disk not Found". A friend tried to help with his limited knowldeg from having loaded Solaris software before, but was unable to ascertain the problem. set_ environment command was not recognized. If its any help the boot path read: /pci@o,o/pci_ide@1f,1/ide@1/sd@o,o : boot args kernel/unix_-r
Any help would be greatly appreciated.
Ken Hunter [email protected] (540) 657-4511 x364

Hi ,
I have not faced this problem on solaris 7 however I did face a problem similar to this on Solaris 8. I made a small dos partition and made it active and then started the solaris 8 installation which then went through fine.
Hope that helps.
regards
Anshul

My iphone won't sync I keep getting an error that says disk not found????

help. My iphone will not sync with itunes. It keeps giving me an error message that says required disk not found?? I don't know what that means and I really need to transfer purchases and sync. I have an iphone 4 that is about 10 months old

What does the error message say EXACTLY?

Required disk not found

I am setting up my nano and it says it is unable to syn it because "the required disk not found". Anyone have any clue what that means?

If you're using XP, the following document may be of some assistance:
iTunes displays -50 error message when syncing iPod on Windows XP
(Even though you're not getting a -50, the message you're getting can sometimes be a symptom of the same basic problem.)

Disk not found

Hello. My laptop is a 2529 HFG with a dual boot: Linux Mint and Windows XP. Today, after starting Windows when I saw the desktop, a windows appeared to notify: disk not found. What does it mean?
Thanks,
davide

have you installed game or application to windows using cd/dvd? Some software needs some files from cd/dvd after windows reboots.

When I try to sync my iPad iTunes says required disk not found

When I sync it it says required disk not found??

Here for PC
https://discussions.apple.com/message/8488249#

IPad sync disk not found

Ipad2 sync fails at stage 7, with error message "disk not found" , not sure if the solution!!

Here for PC
https://discussions.apple.com/message/8488249#

TS1539 when i sync my ipod, it says DISK NOT FOUND????

when i sync my ipod, it says disk not found. what shall i do ?????

iOS: Device not recognized in iTunes for Windows

ASM candidate disks not found

Similar Messages

Maybe you are looking for