ASM Disk preparation for Datafiles and FRA in Oracle 10g RAC Inst

Dear Friends,
Please clarify wheteher the below method is correct to confiure ASM disks for Datafiles and FRA
Partitions provided by IT team for OCR and Voting Disk
/dev/sda1 - 150 GB (For +DATA)
/dev/sda2 - 100 GB (For +FRA)
OS : RHEL 5.6 (64 Bit)
kernel version = 2.6.18-238.el5
Steps:(Node1)
1) Install the RPM's for ASM
rpm -Uvh oracleasm-support-2.1.7-1.el5.x86_64.rpm
rpm -Uvh oracleasm-2.6.18-238.el5-2.0.5-1.el5.x86_64.rpm
rpm -Uvh oracleasmlib-2.0.4-1.el5.x86_64.rpm
2) Configure ASM
/etc/init.d/oracleasm configure
Default user to own the driver interface []: oracle
Default group to own the driver interface []: dba
Start Oracle ASM library driver on boot (y/n) [n]: y
Scan for Oracle ASM disks on boot (y/n) [y]:
Writing Oracle ASM library driver configuration: done
Initializing the Oracle ASMLib driver: [ OK ]
Scanning the system for Oracle ASMLib disks: [ OK ]
3) Cretae ASM Disk
/etc/init.d/oracleasm createdisk DISK1 /dev/sda1
/etc/init.d/oracleasm createdisk DISK2 /dev/sda2
4)/etc/init.d/oracleasm status
5)/etc/init.d/oracleasm scandisks
6)/etc/init.d/oracleasm listdisks
7) Nothing to perform on Node2
8) In dbca choose ASM and map the DISK1 for datafiles and DISK2 for FRA
Please confirm the above steps are right?if not please clarify
If DBCA ->ASM doesn't discover my disk then what should be the Discovery path i have to give?
Please refer any document / Metalink ID for the above complete process
Can i have ASM and oracle DB binary in the same home
Regards,
DB

user564706 wrote:
If DBCA ->ASM doesn't discover my disk then what should be the Discovery path i have to give?for asm disk created with oracleasm discovery path variable is ORCL:*
Please refer any document / Metalink ID for the above complete processhttp://docs.oracle.com/cd/B19306_01/install.102/b14203/storage.htm#BABIFHAB
Can i have ASM and oracle DB binary in the same homeyes. unless you want job role seperation or plan to run multiple versions of oracle homes
>
Regards,
DB

Similar Messages

DELL BLADE Server and Windows 2003 Oracle 10g RAC

Anyone out there sucessfully set up a Windows 2003 Oracle 10g RAC using DELL BLADE Servers and VMWARE configuration?

dear guys
i have 3 database instances running on primary databases.means 3 different sid.now i want to create DR for same.is it possible.how can i do it.its like 3 versions production,trial and development database running on primary under same home.i want to make dr(standby) .so do i follow same proedure for all.
taking backups of all three.creaating pfile for all and then to start recovery for all three.is it possibleYes, It's called RAC but It need to be licensed.
You have a lot of manuals online so check by yourself how to install and configure.

How do I define 2 disk groups for ocr and voting disks at the oracle grid infrastructure installation window

Hello,
It may sound too easy to someone but I need to ask it anyway.
I am in the middle of building Oracle RAC 11.2.0.3 on Linux. I have 2 storage and I created three LUNs in each of storage so 6 LUNs in total look in both of servers. If I choose NORMAL as a redundancy level, is it right to choose my 6 disks those are created for OCR_VOTE at the grid installation? Or should I choose only 3 of them and configure mirroring at latter stage?
The reason why I am asking this is that I didn't find any place to create asm disk group for ocr and voting disks at the oracle grid infrastructure installation window. In fact, I would to like to create two disk groups in which one of groups contains three disks those were brought from storage 1 and the second one contains rest three 3 disk that come from the last storage.
I believe that you will understand the manner and help me on choosing proper way.
Thank you.

Hi,
You have 2 Storage H/W.
You will need to configure a Quorum ASMDisk to store a Voting Disk.
Because if you lose 1/2 or more of all of your voting disks, then nodes get evicted from the cluster, or nodes kick themselves out of the cluster.
You must have the odd number of voting disk (i.e 1,3 or 5) one voting disk per ASM DISK, So 1 Storage will hold more voting disk than another storage.
(e.g 3 Voting Disk - 2 voting stored in stg-A and 1 voting disk store in stg-B)
If fail the storage that hold the major number of Voting disk the whole cluster (all nodes) goes down. Does not matter if you have a other storage online.
It will happen:
https://forums.oracle.com/message/9681811#9681811
You must configure your Clusterware same as RAC extended
Check this link:
http://www.oracle.com/technetwork/database/clusterware/overview/grid-infra-thirdvoteonnfs-131158.pdf
Explaining: How to store OCR, Voting disks and ASM SPFILE on ASM Diskgroup (RAC or RAC Extended) | Levi Pereira | Oracl…

Solaris 10 and Hitachi LUN mapping with Oracle 10g RAC and ASM?

Hi all,
I am working on an Oracle 10g RAC and ASM installation with Sun E6900 servers attached to a Hitachi SAN for shared storage with Sun Solaris 10 as the server OS. We are using Oracle 10g Release 2 (10.2.0.3) RAC clusterware
for the clustering software and raw devices for shared storage and Veritas VxFs 4.1 filesystem.
My question is this:
How do I map the raw devices and LUNs on the Hitachi SAN to Solaris 10 OS and Oracle 10g RAC ASM?
I am aware that with an Oracle 10g RAC and ASM instance, one needs to configure the ASM instance initialization parameter file to set the asm_diskstring setting to recognize the LUNs that are presented to the host.
I know that Sun Solaris 10 uses /dev/rdsk/CwTxDySz naming convention at the OS level for disks. However, how would I map this to Oracle 10g ASM settings?
I cannot find this critical piece of information ANYWHERE!!!!
Thanks for your help!

You don't seem to state categorically that you are using Solaris Cluster, so I'll assume it since this is mainly a forum about Solaris Cluster (and IMHO, Solaris Cluster with Clusterware is better than Clusterware on its own).
Clusterware has to see the same device names from all cluster nodes. This is why Solaris Cluster (SC) is a positive benefit over Clusterware because SC provides an automatically managed, consistent name space. Clusterware on its own forces you to manage either the symbolic links (or worse mknods) to create a consistent namespace!
So, given the SC consistent namespace you simple add the raw devices into the ASM configuration, i.e. /dev/did/rdsk/dXsY. If you are using Solaris Volume Manager, you would use /dev/md/<setname>/rdsk/dXXX and if you were using CVM/VxVM you would use /dev/vx/rdsk/<dg_name>/<dev_name>.
Of course, if you genuinely are using Clusterware on its own, then you have somewhat of a management issue! ... time to think about installing SC?
Tim
---

Time Capsule stuck at Preparing for Backup, and internet TC latency issue

I have an iMac that backs up to my 1TB Time Capsule. I have had it since March. Suddenly it stopped backing up. It get's stuck at "preparing for backup" and never actually completes a backup.
I am also experiencing a HUGE latency issue with my internet connection. I am constantly having to use the 'refresh' page button in Safari.
help....

TB,
*_Time Machine May Report "Preparing..." For a Long Time_*
Consider these factors regarding an extended period of "Preparing...". Consider each topic separately and do not attempt to act on all of them at once.
*Recent Crash or Other Major System Event* (Deep Traversal)
The reasons for this process are described in an article by George Schreyer. “During the preparation step it checks the FSEvents log for consistency. If it determines that something isn't quite right it has to rescan the whole disk. This can take quite awhile. A full rescan is always triggered by a crash, an unplanned shut down event or by booting from some other bootable disk between backups…. After a crash, Time Machine must scan the whole disk to determine what it has to do because it cannot trust the information that it left behind. Connected via an Ethernet connection, this phase would typically take 20 minutes on an older PowerBook. Being connected wirelessly stretches this phase out to over 3 hours.” [http://www.girr.org/mac_stuff/backups.html]
According to the following KB article it can sometimes take a very long time if Time Machine begins this “deep traversal” and has to compare data inventories. This may apply to your situation, particularly if many Gigs of data are involved. (http://support.apple.com/kb/TS1516)
*Anti-Virus Software*
Running anti-virus software can interfere with the backup process. Either disable it altogether, or try the suggestion outlined here, “If you use third-party anti-virus scanning software and have issues, make sure your Time Machine back up folder (Backups.backupdb on the Time Machine disk) is excluded from virus scanning.” (http://support.apple.com/kb/TS1516)
*Software Updates* #
Installing new software, upgrading existing software, or updating Mac OS X system software can create major changes in the structure of your Macs directories. Time Machine will backup every file that has changed since the installation.
If you take a look at the Console logs Time Machine may be reporting that your backups need "deep traversal". That's fine. Time Machine knows what is wrong and how to fix it. If you have a great deal of data, it may take quite awhile.
After an OS update (like 10.5.5) Time Machine realizes the system no longer matches what it looked like during the previous backup. So it has determined that it's earlier catalogue of what-should-be-where is 'untrustable'. So it is going to go item-by-item comparing the before and after of your system. If you have just performed an OS Update then Time Machine knows what it's doing - let it do it!
*Spotlight Keeps Indexing Backup Drive* #
It may be that Time Machine can’t proceed or complete a backup due to a Spotlight indexing error. During this period, take a look at the Spotlight icon in the upper right corner of your screen. Is there a tiny dot pulsating in the center of the spyglass? Click on the icon. Is there a progress bar displayed? Generally Spotlight indexing is a good thing. But at time it may hang and never progress, preventing backups from taking place.
Go to System Prefs --> Spotlight --> Privacy Tab.
Drag your Time Machine disk into the window. It should now be among the items to exclude from indexing.
Now quit System Prefs.
Reopen System Prefs and remove ("-") the Time Machine disk from the window.
This should clear out Spotlights cache. Naturally, Spotlight should begin indexing again (maybe even for a few hours depending on how much data there is), but it should eventually stop.
*Reboot Time Capsule* #
Stop the backup from the Time Machine menu.
When the Time Machine icon stops spinning, unplug the TC from the wall outlet.
Wait 10-15 seconds.
Re-plug it in again.
After it has restarted (30-60 seconds), attempt another backup.
Time Machine will report “Preparing…” again, but it shouldn’t be lasting more than a couple of hours.
Let us know if any of the suggestions above helped in your case.
Cheers!

Can I move cache to external hard drive to save disk space for photoshop and bridge?

Can I move cache to external hard drive to save disk space for photoshop and bridge?

So could I take everything off my external hard drive, save it to my Mac, then re-format it for my Mac and move everything back to the external hard drive?
Yes. Keep in mind that you need to back up all data, including the data on an external drive. So if you're going to use the external drive to store original data, as opposed to backups, then you really need another one to back up the first one. You also need to back up the data on your internal drive, of course. This isn't optional. You must do it, or you'll lose everything sooner or later. All disk drives fail eventually, often with no warning.
If I do that how do I format the external hard drive for my Mac?
Launch the Disk Utility application and search the built-in help for "erase."
Would it be easier to just buy a external hard drive that is for a Mac?
All external hard drives work with Macs. Some might come pre-formatted for use with Macs, but it only takes a few minutes to do that yourself.

My ios7 update is frozen an says "preparing for update" and my computerkeeps saying I need to download the newest version of itunes even though I have. What can I do to fix this?

My ios7 update is frozen an says "preparing for update" and my computerkeeps saying I need to download the newest version of itunes even though I have. What can I do to fix this?

Go to http://www.apple.com/itunes/download and download the current version.

Oracle 10g RAC design with ASM and OCFS

Hi all,
I have a question about a proposed Oracle 10g Release 2 RAC design for a 2 node cluster.
ASM can store database files but not Oracle binaries nor OCR and voting disk. As such, OCFS version 1 does not support a shared Oracle Home. We plan to use OCFS version 2 with ASM version 2 on Red Hat Linux Enteprrise Server 4 with Oracle 10g Release 2 (10.2.0.1).
For OCFS v2, a shared Oracle home and shared OCR and voting disk are supported. My question is does the following proposed architecture make sense for OCFS v2 with ASM v2 on Red Hat Linux 4?
Oracle 10g Release 2 on Red Hat Enterprise Linux Server 4:
OCFS V2:
- shared Oracle home and binaries
- shared OCR and vdisk files
- CRS software shared OCFS v2 filesystem
- spfile
- controlfiles
- tnsnames.ora
ASM v2 with ASMLib v2:
Proposed ASM disk groups:
- data_dg for application data
- backupdg for flashback and archivelogs
- undo_rac1dg ASM diskgroup for undo tablespace for racnode1
- undo_rac2dg ASM diskgroup for undo tablespace for racnode2
- redo_rac1dg ASM diskgroup to hold redo logs for racnode1
- redo_rac2dg ASM diskgroup to hold redo logs for racnode2
- temp1dg temp tablespace for racnode1
- temp2dg temp tablespace for racnode2
Does this sound like a good initial design?
Ben Prusinski, Senior DBA

OK Tim, thanks for advices.
I think Netbackup can be integrated with RMAN but I don't want to loose time on this (political).
To summarize:
ORACLE_HOME and CRS_HOME on each node (RAID1 and NTFS)
Shared storage:
Disk1 and disk 2: RAID1: - Raw partition 1 for OCR
- Raw partition 2 for VotingDisk
- OCFS for FLASH_RECOVERY_AREA
Disk3, disk4 and disk5: RAID 0 - Raw with ASM redundancy normal 1 diskgroup for database files.
This is a running project here, will start testing the design on VMware and then go for production setup.
Regards

How to Prepare for a Job Interview of Oracle DBA ?

How to Prepare for a Job Interview of Oracle DBA ?
Like, What books, PDF's, Websites to refer to get selected for the post of Oracle DBA.
Edited by: sdmuzdba on Mar 25, 2009 7:10 PM
Edited by: sdmuzdba on Mar 25, 2009 7:13 PM
Edited by: sdmuzdba on Mar 25, 2009 7:24 PM

sdmuzdba wrote:
How to Prepare for a Job Interview of Oracle DBA ?
Like, What books, PDF's, Websites to refer to get selected for the post of Oracle DBA.
Well , you won't go for shopping when there are already guests in your home , will you? In case, that didn't make much sense, I meant that you won't start reading books, pdfs, looking at websites when you are going to have an interview already scheduled for you. I can bet my money( whatever little I have) that even doing this, won't bring you any good. If your question directly or indirectly is related to the questions that the interviewer may ask, once again, this would be a total wrong approach to go for an interview. In almost no time, it can be find out whether you are speaking some crammed line or from yourself. I had a chance to sit on the other side of the hot seat and the guy in front of me was giving all teh bookish answers. I twisted the questions and I was sure that he must have not read them anywhere, guess what happened. he started fumbling and finally gave up.
Interview is what you know, what you have done so far. Its not to start picking up LOTS of books, looking for the questions/answers and just think that the interview will happen from that only. I have some questions whose answers, at least the complete answers , you won't find anywhere. My suggestion is to just go for the interview, be honest about what you know and more about , what you don't know. You haven't committed a crime by not knowing some thing. I know nothing and I am never scared from the interviews ;-) .
Not sure that did help or not but still, best of luck.
Aman....

Shared Disk Subsystem for Oracle 10g RAC

I am investigating the feasibility of clustering two 220Rs together in an Oracle 10g RAC configuration. Can I use a D1000 disk array for the shared storage between the two nodes? Can you briefly describe how to do it or point me to documentation on how to do it?

hi dstmark,
can you kindly share some information with me? i am thinking of building up a small lab at home using A1000 to build up an Oracle RAC, as a1000 have 2 scsi port and have a build in controller.
but i am unsure about the detail software requirement, as google return some conflict information.
is SUN cluster would be enough? do i need to get something like Veritas Cluster? which may require a license key....
thanks for sharing information.

Statement for Lock and Unlock an Oracle user (Urgent)

Hi DBAs.
I just want to know about the statement used for lock and unlock the Oracle user thru sysdba suer.
Thanks
Hassan

Hey,
SQL> alter user <USERNAME> account lock;
and
SQL> alter user <USERNAME> account unlock;
Cheers,
Marcello M.
Sorry Justin, same answer........
Message was edited by:
Marcello M.

Oracle 10g RAC using ASM - Storage Issue

I’ve an issue related to Oracle 10g RAC.
I’ve 2 node cluster each being Dell 2850 Server with RHEL 4.0
I’ve EMC CX300 SAN storage with following partitions
/orasoft     10 Gb          OCFS2 File system
/oracrs          2 Gb          OCFS2 File system
/orabackup      100 Gb          OCFS2 File system
The datafiles are on ASM which is not directly visible in OS.
I’ve common Oracle Home installed in /orasoft/db_1 which is shared by both nodes in cluster.
I’ve faced an issue recently related to EMC storage.
The /orasoft partition displays 1.4 Gb space available using df command.
With both nodes sharing the common Oracle Home (/orasoft/db_1), when ever I try to touch a file I get an error as No Space left on device. I’m unable to start any service with the same reason.
Is this setup correct ??
Can anyone help me with this storage issue ??

Need a clarification here...what do you mean by "Storage System"...do you mean a server/node or the SAN storage system. If you are referring to a server/node's local storage, then it would NOT be possible for use by RAC, since the disk space has to be shared among the nodes.
Here is what you can do:
- Create two partitions/devices (for example Disk_1 and Disk_2) in the SAN storage
- Create a ASM disk group which would mirror Disk_1 to Disk_2.
Again, please note that the partitions have to be visible and be accessible read/write from both the nodes/servers.
HTH
Thanks
Chandra Pabba

Oracle 10g RAC+ASM - Storage Issue

I’ve an issue related to Oracle 10g RAC.
I’ve 2 node cluster each being Dell 2850 Server with RHEL 4.0
I’ve EMC CX300 SAN storage with following partitions
/orasoft     10 Gb          OCFS2 File system
/oracrs          2 Gb          OCFS2 File system
/orabackup      100 Gb          OCFS2 File system
The datafiles are on ASM which is not directly visible in OS.
I’ve common Oracle Home installed in /orasoft/db_1 which is shared by both nodes in cluster.
I’ve faced an issue recently related to EMC storage.
The /orasoft partition displays 1.4 Gb space available using df command.
With both nodes sharing the common Oracle Home (/orasoft/db_1), when ever I try to touch a file I get an error as No Space left on device. I’m unable to start any service with the same reason.
Is this setup correct ??
Can anyone help me with this storage issue ??

Hi,
If you create a new diskgroup you may be to add the same diskgroup to parameter file or spfile and which will be needing down time.
sugestion: Instead of creating new diskgroup you should to add disk to existing group.if you add asm disk to existing group your all problem will be solved and Oracle itself will be managing all.And than i am sure no need to add entry in the parameter or spfile like +db_create_file_dest=.....
regards,
Sher khan

Shared Storage allocation for Oracle 10g RAC

Hi,
I am about to implement a Two Node Oracle 10g RAC on Windows 2008 (32-Bit) servers. We are going to use EVA4400 storeage and we have 600 GB for Oracle RAC and database.
I intend to follow the steps given in RACGuides_Rac10gR2OnWindows.pdf mentioned in Note 811271.1 (RAC Assurance Support Team: RAC Starter Kit and Best Practices (Windows)).
I would like to know how should I allocated the storage for OCR,Vote, Database and Flash Recovery Area. Meaning how many LUNs and of what size to be created and presented to both the servers. To start with I need to create a 25 GB database. We will be using Raw Device for OCR and Vote and ASM for Database and Flash Recovery Area.
Please advice.
Thanks,
Thiru

I am about to implement a Two Node Oracle 10g RAC on Windows 2008 (32-Bit) servers. Oracle 10g on Windows 2008 is not supported. Anyway installing a cluster as of today i would use a 64-bit operating system together with a 64-bit database. Everything else is not state-of-the-art anymore.
As of today i would go with 11g Release 1 (11.1.0.7.0) plus latest patches for Clusterware and ASM. Because you are using Windows 2008 you must use 11g Release 1 for the database as well. Bear in mind that Windows 2008 R2 is at this point in time not supported for 11g R1 or 11g R2 either.
I would like to know how should I allocated the storage for OCR,Vote, Database and Flash Recovery Area. Meaning how many LUNs and of what size to be created and presented to both the servers. This is said in the installation documents. Rule of thumb: At least three LUNs of 2 GB for OCR and three LUNs of 2 GB for Voting disk.
To start with I need to create a 25 GB database. We will be using Raw Device for OCR and Vote and ASM for Database and Flash Recovery Area.According to Oracles recommendations: Two disk groups: one for database files, the other for the flashback area.
But your setup may be different (more disk groups,....)
Ronny Egner
My blog: http://ronnyegner.wordpress.com

Does managing Oracle 10g RAC with ASM require full root access?

We currently have three entirely separate support areas, Unix, Storage and DBA. We're now considering using Oracle 10g RAC with ASM and as part of the assessment trying to work out if we can still draw similar support boundaries. I know that installing RAC and configuring ASM requires root access but will DBA continue to need root access to manage & support RAC? If so, does anyone know if the commands they need can be RBAC'd or if we just need to share root access going forwards. I've had a look at a number of docs including http://download.oracle.com/docs/cd/B19306_01/rac.102/b14197/toc.htm. which is fairly informative but none of them seem to mention the requirement for root access on Solaris. I'm guessing they just assume that it's available, but that's not generally the case in our environment.
All advice / info welcome!

I would have thought that the only reason you would need root access once RAC and ASM had been set up would be to add more disks to the ASM configuration. This would be needed to change the ownership on the raw LUNs or to make additions to metasets (SVM/Oban) or diskgroups (VxVM/CVM). Beyond that, I can't imagine needing root access.
I'm sure others will chime in if they can think of other reasons!
Regards,
Tim
Edited by: Tim.Read on Jun 3, 2008 2:25 AM

ASM Disk preparation for Datafiles and FRA in Oracle 10g RAC Inst

Similar Messages

Maybe you are looking for