Asm disks not showning up when clusterware running
On rhel 4 (centos)
I installed/configured asm
[root@green rc5.d]# ./S50oracleasm status
Checking if ASM is loaded: [ OK ]
Checking if /dev/oracleasm is mounted: [ OK ]
[root@green rc5.d]# ./S50oracleasm listdisks
D1
D2
D3
D4
D5
D6
then installed clusterware 10.2.01
then installed 10G 10.2.01 (software only)
when I try to create a asm dg via dbca the D1 -> D6 dont show up . changing the discovery path from blank to 'ORCL:' didn't help
I had previously done this prior to installing clusterware and had no problem .
any thoughts ?
after changing the disk discover path back and forth between ORCL: and ' ' it started to work . :< (
Similar Messages
-
Am running Tiger 10.4.11; just got Snow Leopard 10.6.3 (regular OS disk, not upgrade). When I install Snow Leopard, will it wipe everything? overwrite Tiger? Do I need to make backups of applications and files to reinstall after Snow Leopard Loads? thanks!
Hi Donald,
No it doesn't erase anything by default, it does what we used to call an Archive and Install feature, which can give you a new OS, yet preserve your files and settings if you have enough room on your HD...
http://docs.info.apple.com/article.html?artnum=107120
But it does it automatically unless you specifically erase the Disk, but will replace Tiger completely for the OS & several Apple Apps like Safari, Mail, etc, yet preserve your old settings for those!
If you think you may need Tiger to run any APPs that do not work in SL/10.6, then clone or backup first.
I would recomend 2 things before installing though...
Make sure you have enough RAM & HD space.
Snow Leopard/10.6.x Requirements...
General requirements
* Mac computer with an Intel processor
* 1GB of memory (I say 2GB at least)
* 5GB of available disk space (I say 30GB at least)
If it's a core Duo & not a Core2Duo, then it'll only run in 32 bit mode.
"Try Disk Utility
1. Insert the new Mac OS X SL/10.6 Install Disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214 -
I'm getting a message that my Java is not updated, but when I run the update check, I'm told all is updated. Some web materials won't open because my Java is not updated. What do I do?
Hi Ginny,
There are no more updates for Java from Apple for 10.5.8, the only way to get a Java upgrade is updating your OSX.
Snow Leopard/10.6.x Requirements...
General requirements
* Mac computer with an Intel processor
* 1GB of memory (I say 4GB at least, more if you can afford it)
* 5GB of available disk space (I say 30GB at least)
* DVD drive for installation
* Some features require a compatible Internet service provider; fees may apply.
* Some features require Apple’s MobileMe service; fees and terms apply.
Which apps work with Mac OS X 10.6?...
http://snowleopard.wikidot.com/
It looks like they do still have it:
http://store.apple.com/us/product/MC573Z/A?fnode=MTY1NDAzOA
And it's been reported that if you have a MobileMe account Apple will send one free. -
Hi am trying to save Data into a write to measurement file vi using a NI PXI 1042Q and DAQ NI PXI-6229 with a real time mode but it is not working but when i run it without uploading it into the PXI it save in to the file please find attached my vi
Attachments:
PWMs.vi 130 KBother problem is that the channel DAQmx only works at real time mode not on stand alone vi using Labview 8.2 and Real time 8.2
-
My iphone 6plus not working not charge but when i run it the first time working half an hour when you attempt to run it again light up thr screen and showws the apple logo and after the pice screen illuminates red and does not work what do i do now
Hello Nadersalah,
It seems you're experiencing multiple issue with your iPhone. Based on the information you have provided, it appears your iPhone needs to be serviced. The following link should help you get started with the process and has links with additional information on topics such as warranty and service pricing, battery replacement, and express replacement service.
iPhone Repair and Service - Apple Support
Thank you for contributing to Apple Support Communities.
Cheers,
Bobby_D -
Getting Class not registered error when I run wmi queries
Getting Class not registered error when I run win32 wmi queries. Eg:
Specs:
Lenovo 3000 N100
Windows Vista Home Premium
Genuine Intel (R) CPU T2080 @ 1.73 GHz (2 CPUs)
1014 MB RAM
DirectX 10
Intel(R) GMA 950 -
activated voice over and screen display is not shown and when touched, says time and "screen locked"
Hi muhsinmuhmmed,
If you are having issues with Voice Over and a locked screen, you may find the following discussion helpful:
Apple Support Communities: My iPad is locked and I can't type since VoiceOver is active.
https://discussions.apple.com/thread/3933512
Regards,
- Brenden -
ASM LABLED DISK NOT SHOWN IN GRID INSTALLATION
Hi Guru,
Im new to oracle,just started, we are installing ORCALE 11gr2 11.2.0.3 single node cluster for an test environment on RHEL 6.2.
we installed oracle prerequisite with yum provided by oracle with following command.
yum install "oracle-rdbms-server-11gR2-preinstall" ##did all pathch,rpm & parameter set automatically.
create users oracle & grid with required group.
part-ion disk
#fdisk /dev/sd*
n,p,1,<>,<>,w
#partprob /dev/sd*
Install oracleasm with "yum install kmod-oracleasm" including support & asmlib file .
oracleasm configure
ORACLEASM_ENABLED=true
ORACLEASM_UID=grid
ORACLEASM_GID=asmdba
ORACLEASM_SCANBOOT=true
ORACLEASM_SCANORDER=""
ORACLEASM_SCANEXCLUDE=""
ORACLEASM_USE_LOGICAL_BLOCK_SIZE="false"
oracleasm listdisks
DATA01
DATA02
VOTE01
VOTE02
VOTE03
ls -ltr /dev/oracleasm/disks/*
brw-rw---- 1 grid asmdba 8, 17 May 17 15:58 /dev/oracleasm/disks/VOTE01
brw-rw---- 1 grid asmdba 8, 33 May 17 15:58 /dev/oracleasm/disks/VOTE02
brw-rw---- 1 grid asmdba 8, 49 May 17 15:58 /dev/oracleasm/disks/VOTE03
brw-rw---- 1 grid asmdba 8, 65 May 17 15:59 /dev/oracleasm/disks/DATA01
brw-rw---- 1 grid asmdba 8, 81 May 17 15:59 /dev/oracleasm/disks/DATA02
started grid installation with (grid, asmdba) ./runInstaller
Every things seems good till the time.
while it looks for asmdisk during installation it will not show asm labled disk there with discovery string "/dev/oracleasm/disks/*" -----"OCRL:*"
Please help, im stuck in this issue from 5 days.
Regards
Sumit SharmaHello,
To resolve this issue, first reconfigure your ASMlib using following steps:
[root@host02 ~]# ll -ltr /dev/oracleasm/disks/ASMDISK0*
brw-rw---- 1 grid asmadmin 8, 17 May 15 11:05 /dev/oracleasm/disks/ASMDISK01
brw-rw---- 1 grid asmadmin 8, 18 May 15 11:05 /dev/oracleasm/disks/ASMDISK02
brw-rw---- 1 grid asmadmin 8, 19 May 15 11:05 /dev/oracleasm/disks/ASMDISK03
brw-rw---- 1 grid asmadmin 8, 21 May 15 11:05 /dev/oracleasm/disks/ASMDISK04
brw-rw---- 1 grid asmadmin 8, 22 May 15 11:05 /dev/oracleasm/disks/ASMDISK05
brw-rw---- 1 grid asmadmin 8, 23 May 15 11:05 /dev/oracleasm/disks/ASMDISK06
brw-rw---- 1 grid asmadmin 8, 24 May 15 11:05 /dev/oracleasm/disks/ASMDISK07
brw-rw---- 1 grid asmadmin 8, 25 May 15 11:05 /dev/oracleasm/disks/ASMDISK08
If the permission is not like this then do the following:
*[root@host02 ~]# oracleasm configure -i*
Configuring the Oracle ASM library driver.
Default user to own the driver interface [asd]: grid
Default group to own the driver interface [asd]: asmadmin
Start Oracle ASM library driver on boot (y/n) [y]: y
Scan for Oracle ASM disks on boot (y/n) [y]: y
Writing Oracle ASM library driver configuration: done
[root@host02 ~]# oracleasm exit
[root@host02 ~]#
[root@host02 ~]#
[root@host02 ~]# oracleasm init
Loading module "oracleasm": oracleasm
Mounting ASMlib driver filesystem: /dev/oracleasm
[root@host02 ~]#
[root@host02 ~]#
[root@host02 ~]#
[root@host02 ~]# oracleasm scandisks
Reloading disk partitions: done
Cleaning any stale ASM disks...
Scanning system for ASM disks...
Instantiating disk "ASMDISK01"
Instantiating disk "ASMDISK02"
Instantiating disk "ASMDISK03"
Instantiating disk "ASMDISK04"
Instantiating disk "ASMDISK05"
Instantiating disk "ASMDISK06"
[root@host02 ~]#
[root@host02 ~]#
[root@host02 ~]#
[root@host02 ~]# oracleasm listdisks
ASMDISK01
ASMDISK02
ASMDISK03
ASMDISK04
ASMDISK05
ASMDISK06
Hope it will work.
Thanks,
Ashish Shukla -
I am installing Oracle RAC 10.2 on an EM64-T box, RedHat Linux 4, using a shared MSA1000 SAN for the shared storage.
I have installed CSS (and it is running correctly), and have downloaded and installed the ASM libraries and Oracle.
From the command line I can do an "oracleasm createdisk VOL1 /dev/sda2", then do a "listdisks" and see the device (VOL1) on BOTH nodes in my RAC cluster.
Using DBCA, however, when I try to manage ASM it does not show the device (VOL1). I have confirmed that my Discovery path is ORCL:*.
Any thoughts?hi,
We face the same problem while setting up Oracle ASM on 10R2 RAC on RHEL4. you need to specify the disk path instead of string 'ORCL:'. specify string '/dev/oracleasm/disks/*' and then see, DBCA will show you all the ASM disks you have created.
cheers
Raj -
I have the same problem on all my computers, one running Windows 7 and two with Vista.
The three buttons in the upper right corner of the FF windows are not shown correctly. They are soft of cut off in the middle when the FF window is maximized.It is possible that the screen is too wide or too high and that the scroll bars fall off.<br />
Open the system menu via Alt+Space and see if you can resize that window.<br />
If that works then close Firefox to save that setting.<br />
See also:
* http://kb.mozillazine.org/Resizing_oversize_window
Window sizes and positions are stored in [http://kb.mozillazine.org/localstore.rdf localstore.rdf] in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder].
See http://kb.mozillazine.org/Corrupt_localstore.rdf -
Output shown blank when we run report in xml publisher using excel template
Hi,
1) We have a requirement where we need to run report to shown 100 columns. Since Microsoft word supports only 63 columns. So we are building the report template in Excel.
2) When I run the report in Excel locally I get the output. But when I uplaod in BIP server and then run the report It gives a blank output.
BI Publisher version 10.1.3.4.1
BI Publisher Desktop version 11.1.1.5
Please look into the issue.
Please help
Thanks,
NitaPl post details of OS, database and EBS versions, along with the database characterset.
Are you creating PDF output ? Can you print Chinese characters when using US/UK operating units ? Are you using Pasta ?
How to Generate PDF Output With UTF8 in R12? [ID 778970.1]
HTH
Srini -
When I open a received e-mail the first time, German umlauts (ä, ö, ü) are not shown correctly. Instead of them there are characters like §,$. When I close the e-mails and open them again the German umlauts are shown correctly. I don't know how to solve that problem. Who can help me?
''Zenos [[#answer-670786|said]]''
<blockquote>
Fascinating. Sounds like an inconsistency between the encoding being used and the encoding being declared. I can't think why it should change when you re-open the message, unless Thunderbird is adding a correct encoding declaration.
(Most users complain about it working in the opposite direction; messages stored as drafts often restore with damaged "special" characters such as smart quotes, accented characters and umlauts.)
</blockquote> -
Form does not contain Fragments when I run it
Hi Folks,
I've got a form which uses fragments.This form previews fine in the designer, but when I try to run it using generatePDF Output in a process, the parts that come from the fragments are gone.
The following entries are in the log:
2011-03-04 10:27:19,482 WARN [com.adobe.document.XMLFormService] ALC-XTG-016-649: [1160] Error attempting to read from file
2011-03-04 10:27:19,482 WARN [com.adobe.document.XMLFormService] ALC-XTG-029-698: [1160] InvalidSourceException Exception on URL: repository:///Header_Block_Variant2.xdp Exception: javax.ejb.EJBException: An unexpected exception occured: ALC-REP-018-000: Resource [/Header_Block_Variant2.xdp] does not exist or you do not have sufficient rights to access it.
2011-03-04 10:27:19,482 WARN [com.adobe.document.XMLFormService] ALC-XTG-029-217: [1160] Bad value: 'Header_Block_Variant2.xdp#som($template.Header_Variant2.Header)' of the 'usehref' attribute of 'subform' element ''. Default will be used instead.
2011-03-04 10:27:19,482 WARN [com.adobe.document.XMLFormService] ALC-XTG-029-418: [1160] XMLForm, PAexecute : 29418, Cannot resolve url: Header_Block_Variant2.xdp.
2011-03-04 10:27:22,591 INFO [com.adobe.idp.dsc.provider.service.file.write.impl.FileResultHandlerImpl] FileResultHandlerImpl ----- preserved- source
Does anyone have any idea what the problem might be?
Thanks
VincentWe also have an application where the fragments are stored in a subdirectory from the application. When we run that process, the serverlog show this:
2011-03-04 15:25:53,325 WARN [com.adobe.document.XMLFormService] ALC-XTG-016-649: [1160] Error attempting to read from file
2011-03-04 15:25:53,325 WARN [com.adobe.document.XMLFormService] ALC-XTG-029-698: [1160] InvalidSourceException Exception on URL: repository:Fragments/Header_Block.xdp Exception: javax.ejb.EJBException: An unexpected exception occured: java.lang.ClassNotFoundException: No ClassLoaders found for: com.adobe.repository.RepositoryException
2011-03-04 15:25:53,325 WARN [com.adobe.document.XMLFormService] ALC-XTG-029-217: [1160] Bad value: '..\..\Fragments\Header_Block.xdp#som($template.Header.Header)' of the 'usehref' attribute of 'subform' element ''. Default will be used instead.
2011-03-04 15:25:53,325 WARN [com.adobe.document.XMLFormService] ALC-XTG-029-418: [1160] XMLForm, PAexecute : 29418, Cannot resolve url: ..\..\Fragments\Header_Block.xdp.
2011-03-04 15:25:54,341 INFO [com.adobe.idp.dsc.provider.service.file.write.impl.FileResultHandlerImpl] FileResultHandlerImpl ----- preserved- source
As you can see, the path starts with ..\..\Fragments\etc
Which I interpret as, go 2 subdirectories up and than go into the Fragmenst directory and get the fragment.
Vincent -
Hi,
I am installing the Grid Infrastructure for a cluster (11.2). In the installer screen where an ASM disk group should be chosen, no disk appears.
But a disk appears if a execute "oracleasm listdisks" in the command line. Any idea?
The "oracleasm status" informs the disk is not mounted. Is that the problem?Hi David:
uname -a
Linux cwb02efnora04.keybank.com 2.6.18-164.el5 #1 SMP Tue Aug 18 15:51:48 EDT 2009 x86_64 x86_64 x86_64 GNU/Linux
cat /etc/redhat-release
Red Hat Enterprise Linux Server release 5.4 (Tikanga)
rpm -qa|grep oracleasm
oracleasm-support-2.1.3-1.el5
oracleasmlib-2.0.4-1.el5
oracleasm-2.6.18-164.el5-2.0.5-1.el5
lsmod|grep oracle
oracleasm 84136 1
grep oracleasm /proc/filesystems
nodev oracleasmfs
oracle@cwb02efnora04:/u01/app/oracle>df -ha |grep oracleasm >a
oracleasmfs 0 0 0 - /dev/oracleasm
ls -l /dev/oracleasm/disks/
total 0
brw-rw---- 1 oracle dba 120, 17 Nov 27 12:53 QDATA1
brw-rw---- 1 oracle dba 120, 33 Nov 27 12:53 QDATA2
brw-rw---- 1 oracle dba 120, 49 Nov 27 12:53 QDATA3
brw-rw---- 1 oracle dba 120, 97 Nov 27 13:33 QDATA4
brw-rw---- 1 oracle dba 120, 113 Nov 27 13:34 QDATA5
brw-rw---- 1 oracle dba 120, 65 Nov 27 12:53 QFLASH1
brw-rw---- 1 oracle dba 120, 81 Nov 27 12:53 QFLASH2
~
thank you so much
Susan -
External disk not shown in finder or diskutil
When I connect an external harddrive to my Macbookpro it does not show on Finder, Diskutil (but the hdd disk starts). USB works fine. If I plug in FW when computer is shut down or sleep it works fine. Cant find out why. Tried with different cables and disks.
You could run a Apple Hardware Test but I think the solution will be determined at a genius bar session. I would suggest you make an appointment.
Ciao.
Maybe you are looking for
-
Changes made to the order in SAP CRM 7.0 is not transferring into ECC6.0
Hi SAP CRM Experts, Could you please provide me the solution for the below concern? When the changes are made in SAP CRM order ,the synchronization is not taking place i.e., those changes are not replicating into ECC6.0 and the other way round is wor
-
I was trying to upgrade to the newest version (4) of Firefox, but when I installed the software, I get error -10661 saying the app cannot be launched. I have Mac OS X10.4.11 (PowerPC, not Intel chip).
-
DELETING FILES PERMAMNENTLY FROM HARD DRIVE AND PASSWORD PROTECTING
DOES ANYONE KNOW HOW TO PERMANENTLY DELETE FILES FROM THE HARD DRIVE? ALSO, WHAT ARE THE STEPS TO ADD A PASSWORD TO A FOLDER? THANKS!
-
Color corrected video washed out by font / graphics
Hi everyone- I'm running FCP 4.1.1 on a Mac dual G4. I have some DV clips on the timeline which I adjusted using the brightness / contrast function of the Color Correction tool. When I lay font or graphics over it, the clips get all washed out, and l
-
iTunes is no longer allowing me to sign in to my iTunes account. Whenever I try I get an "unknown error -9813". It will let me listen to my library and even preview songs. It's just that whenever I try to log-in so I can purchase music, it refuses me