ASM installation on AIX?

We are installing Oracle 10gR2 on a new AIX server, we want to use ASM for a single instance on this server. I am told that you need to install ASM instance first and I see some threads that elude to an option from the Orcle Installer to "install and configure ASM only" .
When I click on the "type of install", running the installer from the Disk1 ./runinstaller - I get only two options, enterprise edition or standard edition.
If I look at the "custom" install option it shows the ability to "configure for ASM" but I'm thinking that option would be used to configure an instance to USE an already up and running ASM instance.
How do I install JUST an ASM instance, or does the installer actually create the ASM instance during the custom install if one does not exist?

On the initial screen choose those options that say "Advanced" or "Software Only" or similar things: It is there.

Similar Messages

Oracle 11g R2 RAC installation on AIX

hi,
I wana setup Oracle 11g R2 RAC on Ibm with AIX. Is there any good document or cookbook explaining step by step procedure for the installation...I'll be thankful
thanx

Hi;
Please check below links which is mention about 11gR2 Rac installation on AIX
11gR2 RAC installation in AIX help urgent
Re: 11gR2 RAC installation in AIX help urgent...!!!!
11gR2 RAC Installation Manual (with ASM+Rawdevice)
http://www.goodus.com/knowledge_pds/%EA%B8%B0%EC%88%A0%EB%85%B8%ED%8A%B8_11gR2_RAC_Guide.pdf
Regard
Helios

ASM configuration on AIX

Hi all,
I'm trying to find a best practice, or set of recommendations on installation/using 11g ASM on AIX 5.3L and thought I'd seek some feedback as I've been unable to get such information via searching. The SysAdmin team has the following concerns to which I'd greatly appreciate your experience and guideances:
1. LVM - They would like to use LVM per normal, though the recommendation is against this due to performance and unnecessary overlap (another layer). Any experiences, or guidance on this implementation?
2. PVID - They understand that ASM will overwrite the disks and as such an initial tagging with PVID will get overwritten. Is there anyway they can use a PVID or some other method to tag the disks regardless? They are seeking to maintain current SANCopy (EMC Clariion/Symmetrix) practices and tags make it a lot easier for them it seems.
3. Block vs. raw devices - Our recommendation was to use raw devices (faster), so I'm really looking for an explanation/confirmation of what they've presented below:
brw-rw---- 1 oracle dba 41, 1 Mar 27 14:26 /dev/asm_sandyxi_0
brw-rw---- 1 oracle dba 42, 1 Mar 27 14:25 /dev/asm_sandyxi_1
brw-rw---- 1 oracle dba 43, 1 Mar 27 14:29 /dev/asm_sandyxi_2
brw-rw---- 1 oracle dba 44, 1 Mar 27 14:30 /dev/asm_sandyxi_3
crw-rw---- 1 oracle dba 41, 1 Mar 30 12:06 /dev/rasm_sandyxi_0
crw-rw---- 1 oracle dba 42, 1 Mar 30 12:05 /dev/rasm_sandyxi_1
crw-rw---- 1 oracle dba 43, 1 Mar 30 12:06 /dev/rasm_sandyxi_2
crw-rw---- 1 oracle dba 44, 1 Mar 30 11:41 /dev/rasm_sandyxi_3
The /dev/rasm* are what ASM is detecting being available for use, so my assumption is that this is normal/expected behavior as the SysAdmins have created raw devices on top of the block devices. Is this accurate?
4. Documents - I've tried searching but can't locate ASM (11g) on AIX (5.3L) best practice documents. Is ASM used/recommended on AIX really? My searching thus far has not shown a lot of deployments which would seem to indicate it is not a favored platform.
Any help is really appreciated.

1) as far as I know, there is no restriction to use LV with ASM ; moreover this is the only way if you use HACMP.
2) PVID :
If a PVID assigned disk is added into an ASM diskgroup, ASM will overwrite the PVID with its ASM disk header => on next reboot, the OS, in coordination with the ODM database, will restore the PVID onto the disk, thus destroying the ASM disk and potentially resulting in data loss.
3) Yes. This is the way it must be.

Switching from one ASM installation to another ASM installation

Hi,
We've a server Red Hat Enterprise Linux Server release 5.3 (Tikanga) with installed two 11.1.0.7.0 installation: one for ASM and the other for rdmbs.
Now, we want to install the 11.1.0.7.4 PSU.
For reducing downtime we'd like to create two new 11.1.0.7.0 installation; then patching them with the 11.1.0.7.4 PSU.
Then we'd like to stop ASM and all database running and switching the two old installation with the new one.
For the rdbms installation it's easy: just to modify the oratab and then starting the databases with the new patched installation and then follow the post installation steps (atbundle.sql, etc.)
For ASM instead, how can I do it ? How can I reconfigure the ocssd for using the new ASM installation ? And do I need to do some other steps ?
Thanks
massi

Hi,
Probably my post was not clear enough. Sorry.
Here our scenario:
- we have one linux server with two Oracle11g installations. We use one installation for ASM and the other one for the rdbms. We planned to install the PSU 4 on both the installations.
We could simply shutdown all databases and ASM. Then install PSU4 on both ASM and rdmbs installation. Then startup AMS and databases and proceed with post PSU installation tasks.
There is another possibility. To install in advance two new Oracle11g: one for ASM and the other one for the rdbms. Then apply PSU4 on these two new Oracle11g installations. Then shutdown the databases and the ASM. Then execute:
$ORACLE_HOME/bin/localconfig reset <new_ASM_oracle_home>
stop cssd (/etc/init.d/init.cssd stop)
start cssd (/etc/init.d/init.cssd start)
Then change in /etc/oratab so that databases will point to the new installation (the new one installed for rdbms)
Then copy spfile and password files to the new oracle_home/dbs (the new one installed for rdbms)
Then change in /etc/oratab so that ASM is using the new installation (the new one installed forASM)
Then copy spfile and password file to the new oracle_home/dbs used by ASM (the new one installed forASM)
Finally restart ASM and databases
This way, the ASM will point to the new installation - and the databases will use the other new installation. This way the downtime will be shorter. It will be only necessary to apply the post PSU installation tasks
I've already did it last weekend. It worked
Thanks
massi
Thanks
massi

Oracle DB 9201 installation on AIX 5L with 32 bit architecture!!

Hi,
I have installed AIX 5L on 32 bit kernel machine.
Thereafter I have installed Oracle 9.2.0.1 Database!!
But whenever I am running sqlplus or listener it gives me an error that "you cannot run 64 bit application on 32 bit machine"
but I am able to run DBCA or NETCA command from oracle home directory & it runs properly. It also create & configure the listener but due to the above mismatch it could not start!!
Can any one help !!
Regards,
Indraneel

Same thread into Installation Forum : Re: Oracle DB 9201 installation on AIX 5L with 32 bit architecture!!
Nicolas.

10g rac deinstall and 11.2.0.3 rac installation on aix 6.1

Hi,
I have to perform deinstallation of 2 node 10g rac on aix and on same setup i need to install 2 node 11.2.0.3 rac on aix 6.1.
As being a newbie in this please guide me from where to find the exact documentation for the same.
Also, In linux we need to install oracleasm rpm, In AIX do we need the same?
Thanks.

Following are the OS requirement for Oracle 11gr2 installation on AIX
AIX 5L V5.3 TL 09 SP1 ("5300-09-01") or higher, 64 bit kernel (Part Number E10854-01)
AIX 6.1 TL 02 SP1 ("6100-02-01") or higher, 64-bit kernel
AIX 7.1 TL 00 SP1 ("7100-00-01") or higher, 64-bit kernel
Following can be confirmed from metalink ID 169706.1

Step by Step Oracle 10g ASM Installation on Linux

Hello,
Can any body provide me link for step by step 10g ASM Installation on linux (i.e from disk partitioning to final configuration). I searched on GooGle but didn't find ASM alone, though there were many step by step for RAC environment. I want to first learn ASM alone. Please help me as I'm first time learning ASM.
Looking for Kind reply
Regards,
Abbasi

You should check the oracle learning library for any such doubts,
http://apex.oracle.com/pls/apex/f?p=9830:28:0::NO:RIR:IR_PRODUCT,IR_PRODUCT_SUITE,IR_PRODUCT_COMPONENT,IR_RELEASE,IR_TYPE,IRC_ROWFILTER,IR_FUNCTIONAL_CATEGORY:,,,,,automatic%20storage%20management,
HTH
Aman....

Step by Step 10g ASM Installation on Linux

Hello,
Can any body provide me link for step by step 10g ASM Installation on linux (i.e from disk partitioning to final configuration). I searched on GooGle but didn't find ASM alone, though there were many step by step for RAC environment. I want to first learn ASM alone. Please help me as I'm first time learning ASM.
Looking for Kind reply
Regards,
Abbasi

Abbasi wrote:
Hello,
Can any body provide me link for step by step 10g ASM Installation on linux (i.e from disk partitioning to final configuration). I searched on GooGle but didn't find ASM alone, though there were many step by step for RAC environment. I want to first learn ASM alone. Please help me as I'm first time learning ASM.
Looking for Kind reply
Regards,
AbbasiHi Abbasi,
It would be better if let me know version of Linux, how you plan to use the disk (direct or UDEV), RAC or Single instance.
Anyway, I'll assume you've using OEL/RHEL 5, UDEV for Single Instance (Oracle 10g installed) and only one disk (/dev/asm_disk1) configured for testing purpose.
Creating ASM instance on Linux (Single Instance) using DBCA
1. Add disk to Linux server
2. Configure UDEV for the device. E.g /dev/sdb -> /dev/asm_disk1 //check Oracle documentation for configure UDEV on RHEL/OEL 5. You can directly use /dev/sdc for testing purpose.
3. Change the owner of the disk. e.g. chown oracle:oinstall /dev/asm_disk1
4. As root user, run Oracle CSS script. The Cluster Synchronization Services (CSS) daemon provides cluster services for ASM, communication between the ASM and database instances, and other essential services
# $ORACLE_HOME/bin/localconfig add
5. As oracle user, run DBCA (X11 needed)
$ dbca
6. Select the "Configure Automatic Storage Management" option, then click the "Next" Button.
7. Enter a password for the ASM instance, then click the "Next" button.
8. On the confirmation screen, click the "OK" button to create the ASM instance
9. Once the ASM instance is created, you are presented with the "ASM Disk Groups" screen. Click the "Create New" button.
10. On the "Create Disk Group" screen, enter Disk Group Name of e.g. "DATA" and select the required level of redundancy.
• External - ASM does not mirror the files. This option should only be used if your disks are already protected by some form of redundancy, like RAID.
• Normal - ASM performs two-way mirroring of all files.
• High - ASM performs three-way mirroring of all files.
11. If you didn't find any disk, click "Change Disk Discovery Path..." and enter "/dev/asm_disk1"
12. Select "External" for redundancy, tick the disk (/dev/asm_disk1) and click "OK" button.
13. On the "ASM Disk Groups" screen. Click the "Finish" button.
To access the ASM instance :
1. As oracle user, export the ORACLE_SID
$ export ORACLE_SID=+ASM
2. sqlplus "/as sysdba"
3. SQL> select name, total_mb, free_mb from v$asm_diskgroup;
SQL> select name, path, header_status from v$asm_disk;
To access the ASM command line utility:
1. As oracle user, export the ORACLE_SID
$ export ORACLE_SID=+ASM
2. Enter the asmcmd command
$ asmcmd
You also can refer to :
<a class="jive-link-external" href="http://www.idevelopment.info/data/Oracle/DBA_tips/Automatic_Storage_Management/ASM_10.shtml">http://www.idevelopment.info/data/Oracle/DBA_tips/Automatic_Storage_Management/ASM_10.shtml</a>
<a class="jive-link-external" href="http://forums.oracle.com/forums/thread.jspa?threadID=1102203&tstart=1">how to create an asm instance manaually? oracle 11gr2.
Regards,
Hafiz Abdullah

How can I remove asm and ocr installation in AIX?

Hi,
I try to install single instance with using ASM in AIX.
But I did not make successfully.
Now I want to remove ASM and OCR installation then
I will plan to make new clear installation.
How can I remove asm and ocr ??
Or How can I control my removing is fully correct ?

1) ASM Instance Clean-Up Procedures
Stop all of the databases that use the ASM instance that is running from the Oracle home that is on the node that you are deleting.
On the node that you are deleting, if this is the Oracle home which from which the ASM instance runs, then remove the ASM configuration by completing the following steps. Run the command srvctl stop asm -n node_name for all of the nodes on which this Oracle home exists. Run the command srvctl remove asm -n node for all nodes on which this Oracle home exists. If there are databases on this node that use ASM, then use DBCA Disk Group Management to create an ASM instance on one of the existing Oracle homes on the node, restart the databases if you stopped them.
If you are using a cluster file system for your ASM Oracle home, then ensure that your local node has the $ORACLE_BASE and $ORACLE_HOME environment variables set correctly. Run the following commands from a node other than the node that you are deleting, where node_number is the node number of the node that you are deleting:
rm -r $ORACLE_BASE/admin/+ASMnode_number
rm -f $ORACLE_HOME/dbs/*ASMnode_number
If you are not using a cluster file system for your ASM Oracle home, then run the rm or delete commands mentioned in the previous step on each node on which the Oracle home exists.
2) Deleting an Oracle Clusterware Home Using OUI in Silent Mode
!!! Oracle recommends that you back up your voting disk and OCR files after you complete the node deletion process.
If you ran the Oracle Interface Configuration Tool (OIFCFG) with the -global flag during the installation, then skip this step. Otherwise, from a node that is going to remain in your cluster, from the CRS_home/bin directory, run the following command where node2 is the name of the node that you are deleting:
./oifcfg delif –node node2
Obtain the remote port number, which you will use in the next step, using the following command from the CRS_home/opmn/conf directory:
cat ons.config
From CRS_home/bin on a node that is going to remain in the cluster, run the Oracle Notification Service Utility (RACGONS) as in the following example where remote_port is the ONS remote port number that you obtained in the previous step and node2 is the name of the node that you are deleting:
./racgons remove_config node2:remote_port
On the node to be deleted, run rootdelete.sh as the root user from the CRS_home/install directory. If you are deleting more than one node, then perform this step on all of the other nodes that you are deleting.
From any node that you are not deleting, run the following command from the CRS_home/install directory as the root user where node2,node2-number represents the node and the node number that you want to delete:
./rootdeletenode.sh node2,node2-number
If necessary, identify the node number using the following command on the node that you are deleting:
CRS_home/bin/olsnodes -n
Perform this step only if your are using a non-shared Oracle home. On the node or nodes to be deleted, run the following command from the CRS_home/oui/bin directory where node_to_be_deleted is the name of the node that you are deleting:
./runInstaller -updateNodeList ORACLE_HOME=CRS_home
"CLUSTER_NODES={node_to_be_deleted}"
CRS=TRUE -local
Deinstall the Oracle Clusterware home from the node that you are deleting using OUI as follows by running the following command from the Oracle_home/oui/bin directory, where CRS_home is the name defined for the Oracle Clusterware home:
./runInstaller -deinstall –silent "REMOVE_HOMES={CRS_home}"
Perform step 9 from the previous section about using OUI interactively under the heading "Deleting an Oracle Clusterware Home Using OUI in Interactive Mode".

11gR2 RAC installation in AIX fails while running root.sh on node2

Hi
We are in the process on installing 11gR2 RAC on AIX 6.1
But the installation is failing on node 2while running root.sh with the following error.
DiskGroup DATA creation failed with the following message:
ORA-15018: diskgroup cannot be created
ORA-15017: diskgroup "DATA" cannot be mounted
ORA-15003: diskgroup "DATA" already mounted in another lock name space
Configuration of ASM failed, see logs for details
Did not succssfully configure and start ASM
CRS-2500: Cannot stop resource 'ora.crsd' as it is not running
CRS-4000: Command Stop failed, or completed with errors.
Command return code of 1 (256) from command: XXXXX/grid/bin/crsctl stop resource ora.crsd -init
Stop of resource "ora.crsd -init" failed
Failed to stop CRSD
Please help
Regards

HI,
the second node (second root.sh) should not want to "create" the diskgroup data, since it is already there.
This pretty much sounds like you tried to start both root.sh (on the first node and on the second node) at the same time, not waiting for it to finish on the first node.
It is important, that before you start the root.sh on the second node, it has to be finished successfully on the first node for the cluster to update the information.
Sebastian

ASM installation on RHEL 6.4 in Amazon EC2

I thought I'd perform an installation of 12cR1 to do a little testing. So I launched a new instance in Amazon EC2 and picked an AMI for 64-bit RHEL 6.4.
All started smoothly, but I've got stuck preparing a disk for ASM.
My first plan was to install ASMLIB. I see from the documentation that I need kmod-oracleasm (kmod-oracleasm-2.0.6.rh1-2.el6.x86_64.rpm), and that this is in the RHEL supplementary channel.
$ yum repolist all
Loaded plugins: amazon-id, refresh-packagekit, rhui-lb, security
repo id                                            repo name                                                          status
rhel-source                                        Red Hat Enterprise Linux 6Server - x86_64 - Source                 disabled
rhel-source-beta                                   Red Hat Enterprise Linux 6Server Beta - x86_64 - Source            disabled
rhui-REGION-client-config-server-6                 Red Hat Update Infrastructure 2.0 Client Configuration Server 6    enabled:      3
rhui-REGION-rhel-server-releases                   Red Hat Enterprise Linux Server 6 (RPMs)                           enabled: 10,994
rhui-REGION-rhel-server-releases-optional          Red Hat Enterprise Linux Server 6 Optional (RPMs)                  enabled: 6,250
rhui-REGION-rhel-server-releases-optional-source   Red Hat Enterprise Linux Server 6 Optional (SRPMs)                 disabled
rhui-REGION-rhel-server-releases-source            Red Hat Enterprise Linux Server 6 (SRPMs)                          disabled
repolist: 17,247
$ rhn-channel --add --channel=rhel-x86_64-server-supplementary-6
Username:
^C
Does Amazon EC2 provide the RHEL supplementary channel, and if so what credentials do I need to provide? Otherwise I guess I would need my own RHN subscription, which seems expensive for a self-learning instance.
So my second plan was to avoid ASMLIB and implement udev rules.
I created a 64GiB volume and attached it to the instance as /dev/sdh. On the instance it appears as /dev/xvdl:
$ fdisk -l /dev/xvdl
Disk /dev/xvdl: 68.7 GB, 68719476736 bytes
255 heads, 63 sectors/track, 8354 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0xf4c9fedb
    Device Boot      Start         End      Blocks   Id System
/dev/xvdl1               1        8354    67103473+ 83 Linux
$ sudo scsi_id -g -u -d /dev/xvdl
$
So scsi_id doesn't return a value to use in the udev rule. I've found references to this which suggest setting disk.EnableUUID. Is this option available in Amazon EC2 at all? Or is there an alternative way of getting a UUID for the disk?
Any help with these questions, or suggestions for alternative solutions, would be much appreciated.
Thanks
Mike

Did you try this command ?
~]# blkid
/dev/vda1: UUID="7fa9c421-0054-4555-b0ca-b470a97a3d84" TYPE="ext4"
/dev/vda2: UUID="7IvYzk-TnnK-oPjf-ipdD-cofz-DXaJ-gPdgBW" TYPE="LVM2_member"
/dev/mapper/vg_kvm-lv_root: UUID="a07b967c-71a0-4925-ab02-aebcad2ae824" TYPE="ext4"
/dev/mapper/vg_kvm-lv_swap: UUID="d7ef54ca-9c41-4de4-ac1b-4193b0c1ddb6" TYPE="swap"
https://access.redhat.com/site/documentation/en-US/Red_Hat_Enterprise_Linux/6/html/Deployment_Guide/s2-sysinfo-filesyste…

How to create a single instance ASM installation on Windows using 11gR1 ?

Good afternoon,
After reading much documentation and doing a lot of Googling, I have not found a step by step procedure on how to install/use ASM for a single database instance successfully. This is using Windows XP SP2, Oracle 11gR1 (I can likely adjust any procedure that is meant for Server 2003 or 2008 as long as it is does not require a 64bit installation.)
If someone knows where I can find a step by step procedure on how to do this, that actually works and, would be so kind to share it, I'd much appreciate it.
Thank you,
John.

440bx - 11gR2 wrote:
Good afternoon,
After reading much documentation and doing a lot of Googling, I have not found a step by step procedure on how to install/use ASM for a single database instance successfully. This is using Windows XP SP2, Oracle 11gR1 (I can likely adjust any procedure that is meant for Server 2003 or 2008 as long as it is does not require a 64bit installation.)
If someone knows where I can find a step by step procedure on how to do this, that actually works and, would be so kind to share it, I'd much appreciate it.Hi John,
As we have discussed on other threads, in 11.2, its not possible to do the installation of the ASM without using the Grid Infrastructure. The reason is ASM instance can be created using the ASMCA only in 11.2 which would run only from the Grid Home. So if you are willing to use ASM in 11.2, you have to go through either on 64bit windows, or 32 bit linux. Other than this, you can use 11.1 and/or 10.2 where DBCA can be used for the same.
HTH
Aman....

Root.sh fails for 11gR2 Grid Infrastructure installation on AIX 6.1

Hello all,
root.sh fails with the errors below. SR with Oracle opened. Will post the resolution when it is available. Any insights in the meantime? Thank you!
System information:
OS: AIX 6.1
Runcluvfy.sh reported no issue
Permissions on the raw devices set to 660 and ownership is oracle:dba
Using external redundancy for ASM, ASM instance is online
Permissions on block and raw device files
system1:ux460p1> ls -l /dev/hdisk32
brw-rw---- 1 oracle dba 17, 32 Mar 11 16:50 /dev/hdisk32
system11:ux460p1> ls -l /dev/rhdisk32
crw-rw---- 1 oracle dba 17, 32 Mar 12 15:52 /dev/rhdisk32
ocrconfig.log
racle Database 11g Clusterware Release 11.2.0.1.0 - Production Copyright 1996, 2009 Oracle. All rights reserved.
2010-03-15 19:17:19.773: [ OCRCONF][1]ocrconfig starts...
2010-03-15 19:17:19.775: [ OCRCONF][1]Upgrading OCR data
2010-03-15 19:17:20.474: [ OCRASM][1]proprasmo: kgfoCheckMount return [0]. Cannot proceed with dirty open.
2010-03-15 19:17:20.474: [ OCRASM][1]proprasmo: Error in open/create file in dg [DATA]
[ OCRASM][1]SLOS : [clsuSlosFormatDiag called with non-error slos.]
2010-03-15 19:17:20.603: [ OCRRAW][1]proprioo: Failed to open [+DATA]. Returned proprasmo() with [26]. Marking location as UNAVAILABLE.
2010-03-15 19:17:20.603: [ OCRRAW][1]proprioo: No OCR/OLR devices are usable
2010-03-15 19:17:20.603: [ OCRASM][1]proprasmcl: asmhandle is NULL
2010-03-15 19:17:20.603: [ OCRRAW][1]proprinit: Could not open raw device
2010-03-15 19:17:20.603: [ OCRASM][1]proprasmcl: asmhandle is NULL
2010-03-15 19:17:20.604: [ default][1]a_init:7!: Backend init unsuccessful : [26]
2010-03-15 19:17:20.604: [ OCRCONF][1]Exporting OCR data to [OCRUPGRADEFILE]
2010-03-15 19:17:20.604: [ OCRAPI][1]a_init:7!: Backend init unsuccessful : [33]
2010-03-15 19:17:20.605: [ OCRCONF][1]There was no previous version of OCR. error:[PROC-33: Oracle Cluster Registry is not configured]
2010-03-15 19:17:20.841: [ OCRASM][1]proprasmo: kgfoCheckMount return [0]. Cannot proceed with dirty open.
2010-03-15 19:17:20.841: [ OCRASM][1]proprasmo: Error in open/create file in dg [DATA]
[ OCRASM][1]SLOS : [clsuSlosFormatDiag called with non-error slos.]
2010-03-15 19:17:20.966: [ OCRRAW][1]proprioo: Failed to open [+DATA]. Returned proprasmo() with [26]. Marking location as UNAVAILABLE.
2010-03-15 19:17:20.966: [ OCRRAW][1]proprioo: No OCR/OLR devices are usable
2010-03-15 19:17:20.966: [ OCRASM][1]proprasmcl: asmhandle is NULL
2010-03-15 19:17:20.966: [ OCRRAW][1]proprinit: Could not open raw device
2010-03-15 19:17:20.966: [ OCRASM][1]proprasmcl: asmhandle is NULL
2010-03-15 19:17:20.966: [ default][1]a_init:7!: Backend init unsuccessful : [26]
2010-03-15 19:17:21.412: [ OCRRAW][1]propriogid:1_2: INVALID FORMAT
2010-03-15 19:17:21.412: [ OCRRAW][1]proprior: Header check from OCR device 0 offset 0 failed (26).
2010-03-15 19:17:21.414: [ OCRRAW][1]ibctx: Failed to read the whole bootblock. Assumes invalid format.
2010-03-15 19:17:21.414: [ OCRRAW][1]proprinit:problem reading the bootblock or superbloc 22
2010-03-15 19:17:21.534: [ OCRRAW][1]propriogid:1_2: INVALID FORMAT
2010-03-15 19:17:21.701: [ OCRRAW][1]iniconfig:No 92 configuration
2010-03-15 19:17:21.701: [ OCRAPI][1]a_init:6a: Backend init successful
2010-03-15 19:17:21.764: [ OCRCONF][1]Initialized DATABASE keys
2010-03-15 19:17:21.770: [ OCRCONF][1]Successfully set skgfr block 0
2010-03-15 19:17:21.771: [ OCRCONF][1]Exiting [status=success]...
**alert.log**
Oracle Database 11g Clusterware Release 11.2.0.1.0 - Production Copyright 1996, 2009 Oracle. All rights reserved.
2010-03-15 19:12:00.148
[client(483478)]CRS-2106:The OLR location /u01/app/grid/cdata/ux460p1.olr is inaccessible. Details in /u01/app/grid/log/ux460p1/client/ocrconfig_483478.log.
2010-03-15 19:12:00.171
[client(483478)]CRS-2101:The OLR was formatted using version 3.
2010-03-15 14:16:18.620
[ohasd(471204)]CRS-2112:The OLR service started on node ux460p1.
2010-03-15 14:16:18.720
[ohasd(471204)]CRS-8017:location: /etc/oracle/lastgasp has 8 reboot advisory log files, 0 were announced and 0 errors occurred
2010-03-15 14:16:18.847
[ohasd(471204)]CRS-2772:Server 'ux460p1' has been assigned to pool 'Free'.
2010-03-15 14:16:54.107
[ctssd(340174)]CRS-2403:The Cluster Time Synchronization Service on host ux460p1 is in observer mode.
2010-03-15 14:16:54.123
[ctssd(340174)]CRS-2407:The new Cluster Time Synchronization Service reference node is host ux460p1.
2010-03-15 14:16:54.917
[ctssd(340174)]CRS-2401:The Cluster Time Synchronization Service started on host ux460p1.
2010-03-15 19:17:21.414
[client(376968)]CRS-1006:The OCR location +DATA is inaccessible. Details in /u01/app/grid/log/ux460p1/client/ocrconfig_376968.log.
2010-03-15 19:17:21.701
[client(376968)]CRS-1001:The OCR was formatted using version 3.
2010-03-15 14:17:24.888
[crsd(303252)]CRS-1012:The OCR service started on node ux460p1.
2010-03-15 14:17:56.344
[ctssd(340174)]CRS-2405:The Cluster Time Synchronization Service on host ux460p1 is shutdown by user
2010-03-15 14:19:14.855
[ctssd(340188)]CRS-2403:The Cluster Time Synchronization Service on host ux460p1 is in observer mode.
2010-03-15 14:19:14.870
[ctssd(340188)]CRS-2407:The new Cluster Time Synchronization Service reference node is host ux460p1.
2010-03-15 14:19:15.638
[ctssd(340188)]CRS-2401:The Cluster Time Synchronization Service started on host ux460p1.
2010-03-15 14:19:32.985
[crsd(417946)]CRS-1012:The OCR service started on node ux460p1.
2010-03-15 14:19:35.250
[crsd(417946)]CRS-1201:CRSD started on node ux460p1.
2010-03-15 14:19:35.698
[ohasd(471204)]CRS-2765:Resource 'ora.crsd' has failed on server 'ux460p1'.
2010-03-15 14:19:38.928

Public and Private are on different devices and subnets.
No logfile named: ocrconfig_7833.log
I do have ocrconfig_7089.log and ocrconfig_8985.log
Here is their contents:
ocrconfig_7089.log:
Oracle Database 11g Clusterware Release 11.2.0.1.0 - Production Copyright 1996, 2009 Oracle. All rights reserved.
2010-11-09 13:38:32.518: [ OCRCONF][2819644944]ocrconfig starts...
2010-11-09 13:38:32.542: [ OCRCONF][2819644944]Upgrading OCR data
2010-11-09 13:38:32.576: [ OCROSD][2819644944]utread:3: Problem reading buffer 12e54000 buflen 4096 retval 0 phy_offset 102400 retry 0
2010-11-09 13:38:32.576: [ OCROSD][2819644944]utread:3: Problem reading buffer 12e54000 buflen 4096 retval 0 phy_offset 102400 retry 1
2010-11-09 13:38:32.576: [ OCROSD][2819644944]utread:3: Problem reading buffer 12e54000 buflen 4096 retval 0 phy_offset 102400 retry 2
2010-11-09 13:38:32.576: [ OCROSD][2819644944]utread:3: Problem reading buffer 12e54000 buflen 4096 retval 0 phy_offset 102400 retry 3
2010-11-09 13:38:32.576: [ OCROSD][2819644944]utread:3: Problem reading buffer 12e54000 buflen 4096 retval 0 phy_offset 102400 retry 4
2010-11-09 13:38:32.576: [ OCROSD][2819644944]utread:3: Problem reading buffer 12e54000 buflen 4096 retval 0 phy_offset 102400 retry 5
2010-11-09 13:38:32.576: [ OCRRAW][2819644944]propriogid:1_1: Failed to read the whole bootblock. Assumes invalid format.
2010-11-09 13:38:32.576: [ OCRRAW][2819644944]proprioini: all disks are not OCR/OLR formatted
2010-11-09 13:38:32.576: [ OCRRAW][2819644944]proprinit: Could not open raw device
2010-11-09 13:38:32.576: [ default][2819644944]a_init:7!: Backend init unsuccessful : [26]
2010-11-09 13:38:32.577: [ OCRCONF][2819644944]Exporting OCR data to [OCRUPGRADEFILE]
2010-11-09 13:38:32.577: [ OCRAPI][2819644944]a_init:7!: Backend init unsuccessful : [33]
2010-11-09 13:38:32.577: [ OCRCONF][2819644944]There was no previous version of OCR. error:[PROCL-33: Oracle Local Registry is not configured]
2010-11-09 13:38:32.578: [ OCROSD][2819644944]utread:3: Problem reading buffer 12e54000 buflen 4096 retval 0 phy_offset 102400 retry 0
2010-11-09 13:38:32.578: [ OCROSD][2819644944]utread:3: Problem reading buffer 12e54000 buflen 4096 retval 0 phy_offset 102400 retry 1
2010-11-09 13:38:32.578: [ OCROSD][2819644944]utread:3: Problem reading buffer 12e54000 buflen 4096 retval 0 phy_offset 102400 retry 2
2010-11-09 13:38:32.578: [ OCROSD][2819644944]utread:3: Problem reading buffer 12e54000 buflen 4096 retval 0 phy_offset 102400 retry 3
2010-11-09 13:38:32.578: [ OCROSD][2819644944]utread:3: Problem reading buffer 12e54000 buflen 4096 retval 0 phy_offset 102400 retry 4
2010-11-09 13:38:32.578: [ OCROSD][2819644944]utread:3: Problem reading buffer 12e54000 buflen 4096 retval 0 phy_offset 102400 retry 5
2010-11-09 13:38:32.578: [ OCRRAW][2819644944]propriogid:1_1: Failed to read the whole bootblock. Assumes invalid format.
2010-11-09 13:38:32.578: [ OCRRAW][2819644944]proprioini: all disks are not OCR/OLR formatted
2010-11-09 13:38:32.578: [ OCRRAW][2819644944]proprinit: Could not open raw device
2010-11-09 13:38:32.578: [ default][2819644944]a_init:7!: Backend init unsuccessful : [26]
2010-11-09 13:38:32.579: [ OCROSD][2819644944]utread:3: Problem reading buffer 12e54000 buflen 4096 retval 0 phy_offset 102400 retry 0
2010-11-09 13:38:32.579: [ OCROSD][2819644944]utread:3: Problem reading buffer 12e54000 buflen 4096 retval 0 phy_offset 102400 retry 1
2010-11-09 13:38:32.579: [ OCROSD][2819644944]utread:3: Problem reading buffer 12e54000 buflen 4096 retval 0 phy_offset 102400 retry 2
2010-11-09 13:38:32.579: [ OCROSD][2819644944]utread:3: Problem reading buffer 12e54000 buflen 4096 retval 0 phy_offset 102400 retry 3
2010-11-09 13:38:32.579: [ OCROSD][2819644944]utread:3: Problem reading buffer 12e54000 buflen 4096 retval 0 phy_offset 102400 retry 4
2010-11-09 13:38:32.579: [ OCROSD][2819644944]utread:3: Problem reading buffer 12e54000 buflen 4096 retval 0 phy_offset 102400 retry 5
2010-11-09 13:38:32.579: [ OCRRAW][2819644944]propriogid:1_1: Failed to read the whole bootblock. Assumes invalid format.
2010-11-09 13:38:32.579: [ OCROSD][2819644944]utread:3: Problem reading buffer 12e54000 buflen 4096 retval 0 phy_offset 102400 retry 0
2010-11-09 13:38:32.579: [ OCROSD][2819644944]utread:3: Problem reading buffer 12e54000 buflen 4096 retval 0 phy_offset 102400 retry 1
2010-11-09 13:38:32.579: [ OCROSD][2819644944]utread:3: Problem reading buffer 12e54000 buflen 4096 retval 0 phy_offset 102400 retry 2
2010-11-09 13:38:32.579: [ OCROSD][2819644944]utread:3: Problem reading buffer 12e54000 buflen 4096 retval 0 phy_offset 102400 retry 3
2010-11-09 13:38:32.579: [ OCROSD][2819644944]utread:3: Problem reading buffer 12e54000 buflen 4096 retval 0 phy_offset 102400 retry 4
2010-11-09 13:38:32.579: [ OCROSD][2819644944]utread:3: Problem reading buffer 12e54000 buflen 4096 retval 0 phy_offset 102400 retry 5
2010-11-09 13:38:32.591: [ OCRRAW][2819644944]ibctx: Failed to read the whole bootblock. Assumes invalid format.
2010-11-09 13:38:32.591: [ OCRRAW][2819644944]proprinit:problem reading the bootblock or superbloc 22
2010-11-09 13:38:32.591: [ OCROSD][2819644944]utread:3: Problem reading buffer 12e55000 buflen 4096 retval 0 phy_offset 102400 retry 0
2010-11-09 13:38:32.591: [ OCROSD][2819644944]utread:3: Problem reading buffer 12e55000 buflen 4096 retval 0 phy_offset 102400 retry 1
2010-11-09 13:38:32.591: [ OCROSD][2819644944]utread:3: Problem reading buffer 12e55000 buflen 4096 retval 0 phy_offset 102400 retry 2
2010-11-09 13:38:32.591: [ OCROSD][2819644944]utread:3: Problem reading buffer 12e55000 buflen 4096 retval 0 phy_offset 102400 retry 3
2010-11-09 13:38:32.591: [ OCROSD][2819644944]utread:3: Problem reading buffer 12e55000 buflen 4096 retval 0 phy_offset 102400 retry 4
2010-11-09 13:38:32.591: [ OCROSD][2819644944]utread:3: Problem reading buffer 12e55000 buflen 4096 retval 0 phy_offset 102400 retry 5
2010-11-09 13:38:32.591: [ OCRRAW][2819644944]propriogid:1_1: Failed to read the whole bootblock. Assumes invalid format.
2010-11-09 13:38:32.681: [ OCRAPI][2819644944]a_init:6a: Backend init successful
2010-11-09 13:38:32.699: [ OCRCONF][2819644944]Initialized DATABASE keys
2010-11-09 13:38:32.700: [ OCRCONF][2819644944]Exiting [status=success]...
ocrconfig_8985.log:
Oracle Database 11g Clusterware Release 11.2.0.1.0 - Production Copyright 1996, 2009 Oracle. All rights reserved.
2010-11-09 13:41:28.169: [ OCRCONF][2281741840]ocrconfig starts...
2010-11-09 13:41:28.175: [ OCRCONF][2281741840]Upgrading OCR data
2010-11-09 13:41:30.896: [ OCRASM][2281741840]proprasmo: kgfoCheckMount return [0]. Cannot proceed with dirty open.
2010-11-09 13:41:30.896: [ OCRASM][2281741840]proprasmo: Error in open/create file in dg [DATA]
[ OCRASM][2281741840]SLOS : [clsuSlosFormatDiag called with non-error slos.]
2010-11-09 13:41:31.208: [ OCRRAW][2281741840]proprioo: Failed to open [+DATA]. Returned proprasmo() with [26]. Marking location as UNAVAILABLE.
2010-11-09 13:41:31.210: [ OCRRAW][2281741840]proprioo: No OCR/OLR devices are usable
2010-11-09 13:41:31.210: [ OCRASM][2281741840]proprasmcl: asmhandle is NULL
2010-11-09 13:41:31.210: [ OCRRAW][2281741840]proprinit: Could not open raw device
2010-11-09 13:41:31.211: [ OCRASM][2281741840]proprasmcl: asmhandle is NULL
2010-11-09 13:41:31.213: [ default][2281741840]a_init:7!: Backend init unsuccessful : [26]
2010-11-09 13:41:31.214: [ OCRCONF][2281741840]Exporting OCR data to [OCRUPGRADEFILE]
2010-11-09 13:41:31.216: [ OCRAPI][2281741840]a_init:7!: Backend init unsuccessful : [33]
2010-11-09 13:41:31.216: [ OCRCONF][2281741840]There was no previous version of OCR. error:[PROC-33: Oracle Cluster Registry is not configured]
2010-11-09 13:41:32.214: [ OCRASM][2281741840]proprasmo: kgfoCheckMount return [0]. Cannot proceed with dirty open.
2010-11-09 13:41:32.214: [ OCRASM][2281741840]proprasmo: Error in open/create file in dg [DATA]
[ OCRASM][2281741840]SLOS : [clsuSlosFormatDiag called with non-error slos.]
2010-11-09 13:41:32.535: [ OCRRAW][2281741840]proprioo: Failed to open [+DATA]. Returned proprasmo() with [26]. Marking location as UNAVAILABLE.
2010-11-09 13:41:32.535: [ OCRRAW][2281741840]proprioo: No OCR/OLR devices are usable
2010-11-09 13:41:32.535: [ OCRASM][2281741840]proprasmcl: asmhandle is NULL
2010-11-09 13:41:32.535: [ OCRRAW][2281741840]proprinit: Could not open raw device
2010-11-09 13:41:32.535: [ OCRASM][2281741840]proprasmcl: asmhandle is NULL
2010-11-09 13:41:32.536: [ default][2281741840]a_init:7!: Backend init unsuccessful : [26]
2010-11-09 13:41:35.359: [ OCRRAW][2281741840]propriogid:1_2: INVALID FORMAT
2010-11-09 13:41:35.361: [ OCRRAW][2281741840]proprior: Header check from OCR device 0 offset 0 failed (26).
2010-11-09 13:41:35.363: [ OCRRAW][2281741840]ibctx: Failed to read the whole bootblock. Assumes invalid format.
2010-11-09 13:41:35.363: [ OCRRAW][2281741840]proprinit:problem reading the bootblock or superbloc 22
2010-11-09 13:41:35.843: [ OCRRAW][2281741840]propriogid:1_2: INVALID FORMAT
2010-11-09 13:41:36.430: [ OCRRAW][2281741840]iniconfig:No 92 configuration
2010-11-09 13:41:36.431: [ OCRAPI][2281741840]a_init:6a: Backend init successful
2010-11-09 13:41:36.540: [ OCRCONF][2281741840]Initialized DATABASE keys
2010-11-09 13:41:36.545: [ OCRCONF][2281741840]Successfully set skgfr block 0
2010-11-09 13:41:36.552: [ OCRCONF][2281741840]Exiting [status=success]...
Both of these log files show errors, then they show success??????

ASM installation failure from Oracle GRID under Windows 7 64 bit

I am a rookie..I am running Oracle database 11gR2 running on a Windows 7 64 bit system.
I am implementing ASM onto my system solely for learning purposes
The implementation of ASM has changed between database releases 11gR1 and 11gR2 such that it is no longer configured locally but is now implemented from within Oracle GRID. Unfortunately, the book I am using to study my OCP from was written at the time of 11gR1 so I can no longer follow its instructions to create and configure ASM. Instead of using DBCA I now need to use ASMCA to configure ASM.
As a preliminary requirement I successfully installed Oracle Grid and configured it to run on my standalone server.
I created two partitions on my harddrive ...... drive G: and drive H: with intent of using them as my ASM disks. 45 Gig and 50 gig in size respectively formatted with the NTFS filesystem.
I ran ASMCA in an attempt to create an ASM instance
I specified these partition drives '\\.\G:' and '\\.\H:' in the disk discovery path which were successfully picked up.
However when ASMCA executed the creation process after some time it failed with the following message:
One or more diskgroup(s) creation failed as below:
DiskGroup mydisks creation failed with the following message:
ORA-15018: diskgroup cannot be created
ORA-00600: internal error code, arguments: [17090], [], [], [], [], [], [], [], [], [], [], []
Check C:\app\peter\cfgtoollogs\asmca\asmca-12101712AM0558.log for details.
Which I did and found many things
Thread-40] [ 2012-10-17 00:25:05.723 EST ] [UsmcaLogger.logInfo:141] Oradim Command : C:\app\11.2.0\grid\bin\oradim.exe -new -asmsid +ASM -startmode manual -srvcstart demand -spfile
[Thread-40] [ 2012-10-17 00:25:05.723 EST ] [UsmcaLogger.logEntry:113] Entering oracle.sysman.assistants.usmca.util.UsmcaUtil Method : executeCommand
[Thread-40] [ 2012-10-17 00:25:05.723 EST ] [UsmcaLogger.logInfo:141] Command: C:\app\11.2.0\grid\bin\oradim.exe -new -asmsid +ASM -startmode manual -srvcstart demand -spfile
[Thread-40] [ 2012-10-17 00:25:07.254 EST ] [UsmcaLogger.logInfo:141] Instance created.
Ok. As above the ASM instance appeared to have been successfully created so as part of my investigative process to confirm what the script actually did successfully execute I attempted to log into the ASM instance to see how far it would get. It fails with the following result
C:\Windows\system32>set ORACLE_SID=+ASM
C:\Windows\system32>sqlplus sys as sysasm
SQL*Plus: Release 11.2.0.1.0 Production on Wed Oct 17 10:16:36 2012
Copyright (c) 1982, 2010, Oracle. All rights reserved.
Enter password:
ERROR:
ORA-12560: TNS:protocol adapter error
Enter user-name:
I checked Windows Task Manager
There is an OracleOHService and it is running
LISTENER is running ie the local listener running on port 1521 that was originally created with a previous basic stand alone installation of the Oracle 11gR2 database . (ie before I installed Oracle GRID). No other listeners are running.
Can t see any evidence of any ASM service on Windows Task manager started/stopped or otherwise. Neither can I see evidence of a CSS service.
The log file that was generated is large I am not clear on what I should be looking for in order to find clues as to how I might manually resolve this problem and possibly 'salvage' the installation. Any advice would be appreciated.

Hi,
read the documentation:
http://www.oracle.com/pls/db112/to_pdf?pathname=install.112/e24169.pdf
and you will find multiple errors, you probably did.
Especially the part on preparing storage.
Regards
Sebastian

Solution Manager 4.0 Installation Error AIX 5.3 / Oracle 10.2.0.1

Hi All,
I am facing an error in the installation step of Solution Manager 4.0 on AIX 5.3 / Oracle 10.2.0.1
Hostname : INXXXXSAPIDES
The ABAP instance is not coming up and the Installation failed.I tried to bring up the instance manually.But was not successful.
Workprocess traces :
S queue size (profile) = 300
S hostspool list size = 3000
S option list size is 30
S found processing queue enabled
S found spool memory service RSPO-RCLOCKS at 0x7000001732fa070
S doing lock recovery
S setting server cache root
S found spool memory service RSPO-SERVERCACHE at 0x7000001732fa470
S using messages for server info
S size of spec char cache entry: 297032 bytes (timeout 100 sec)
S size of open spool request entry: 2176 bytes
S immediate print option for implicitely closed spool requests is disabled
A
A -PXA--
A PXA INITIALIZATION
A System page size: 4kb, total admin_size: 5720kb, dir_size: 5664kb.
A Attached to PXA (address 0x7000001e0000000, size 150000K)
A abap/pxa = shared unprotect gen_local
A PXA INITIALIZATION FINISHED
A -PXA--
A
Signal 6 encountered.
=> 64 bit R/3 Kernel
=> 64 bit AIX Kernel
=> Heap limit = unlimited
=> Stack limit = unlimited
=> Core limit = unlimited
=> File size limit = unlimited
=> Heap address = 0x0x113a1f5c0
=> Stack address = 0xfffffffffffded0
=> Stack low = 0xfffffffffffb5e0
=> Stack high = 0xffffffffffff810
=> Stack Trace:
 pthread_kill() at 0x900000000490650
 praise() at 0x900000000490070
 raise() at 0x900000000059624
 abort() at 0x900000000084a90
TrThHookFunc: called for WP dump
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 720]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 260]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M ThErrPrivHandle: set th_errno (11)
M Entering ThReadDetachMode
M *** ERROR => ThIErrHandle: bad value for th_act_em_hdl (8), detach T0/M0 [thxxhead.c 10721]

DEV_DISP 
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 102
Release check o.K.
Sat Jul 28 22:41:18 2007
ERROR => W0 (pid 442462) died [dpxxdisp.c 14319]
ERROR => W2 (pid 635048) died [dpxxdisp.c 14319]
ERROR => W3 (pid 598164) died [dpxxdisp.c 14319]
ERROR => W4 (pid 770084) died [dpxxdisp.c 14319]
ERROR => W5 (pid 815142) died [dpxxdisp.c 14319]
ERROR => W6 (pid 761862) died [dpxxdisp.c 14319]
my types changed after wp death/restart 0xbf --> 0xbd
ERROR => W7 (pid 671804) died [dpxxdisp.c 14319]
my types changed after wp death/restart 0xbd --> 0xb9
ERROR => W8 (pid 630958) died [dpxxdisp.c 14319]
ERROR => W9 (pid 622786) died [dpxxdisp.c 14319]
ERROR => W10 (pid 549070) died [dpxxdisp.c 14319]
my types changed after wp death/restart 0xb9 --> 0xb1
ERROR => W11 (pid 544802) died [dpxxdisp.c 14319]
my types changed after wp death/restart 0xb1 --> 0xa1
ERROR => W12 (pid 508062) died [dpxxdisp.c 14319]
my types changed after wp death/restart 0xa1 --> 0x81
Sat Jul 28 22:41:55 2007
ERROR => W1 (pid 802934) died [dpxxdisp.c 14319]
my types changed after wp death/restart 0x81 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
stderr1
Command: dw.sapSM4_DVEBMGS10
 pf=/usr/sap/SM4/SYS/profile/SM4_DVEBMGS10_INSISCSAPIDES
ICM up and operational (pid: 675892) ***
timezone value meaningless. BSD libraries linked?
work process W1 died => ThSigHandler: signal
timezone value meaningless. BSD libraries linked?
work process W2 died => ThSigHandler: signal
timezone value meaningless. BSD libraries linked?
work process W12 died => ThSigHandler: signal
timezone value meaningless. BSD libraries linked?
.timezone value meaningless. BSD libraries linked?
work process W4 died => ThSigHandler: signal
work process W8 died => ThSigHandler: signal
timezone value meaningless. BSD libraries linked?
Can someone please help me in this.
Thanks
Siva
Message was edited by:
 siva sakthi

I found the solution..
There was a a problem in the timezone setting for the server.After changing it and rebooting it worked perfectely.

ASM installation on AIX?

Similar Messages

Maybe you are looking for