ASM instances on 2 node Oracle RAC 10g r2 on Red Hat 4 u1
Hi all
I'm experiencing a problem in configuring diskgroups under +ASM instances on a two node Oracle RAC.
I followed the official guide and also official documents from metalink site, but i'm stuck with the visibility of asm disks.
I created fake disks on nfs with Netapp certified storage binding them to block device with the usual trick "losetup /dev/loopX /nfs/disk1 " ,
run "oracleasm createdisk DISKX /dev/loopX" on one node and
"oracleasm scandisks" on the other one.
With "oracleasm listdisks" i can see the disks at OS level in both nodes , but , when i try to create and mount diskgroup in the ASM instances , on the instance on which i create the diskgroup all is well, but the other one doesn't see the disks at all, and diskgroup mount fails with :
ERROR: no PST quorum in group 1: required 2, found 0
Tue Sep 20 16:22:32 2005
NOTE: cache dismounting group 1/0x6F88595E (DG1)
NOTE: dbwr not being msg'd to dismount
ERROR: diskgroup DG1 was not mounted
any help would be appreciated
thanks a lot.
Antonello
I'm having this same problem. Did you ever find a solution?
Similar Messages
-
Installing Oracle Database 10g on Linux Red Hat 5.1
While inslalling Oracle Database 10g Client Release 2 (10.2.0.1.0) for Linux x86-64 on Red Hat Enterprise Linux Server release 5.1 (Tikanga) we've got an error
Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2
Failed <<<<
Could we install Oracle Database 10g on Linux Red Hat 5.1 or we need only Oracle Database 11g?Verify that the redhat-release RPM is installed on your Red Hat system:
rpm -q redhat-release
This RPM is important for RHEL since RHEL AS 4, RHEL AS 3, and RHEL AS 2.1 are Linux releases supported by Oracle. Without this RPM, Oracle 10g OUI won't be able to recognize it as a supported OS. However, the installer of 10g 10.1.0.3 does not recognize RHEL AS 4 as a supported release yet. This means that you will have to edit the /etc/redhat-release file. You also have to change /etc/redhat-release for unsupported releases like Fedora Core and RH9.
I do not recommend to execute "runInstaller -ignoreSysPrereqs" since this will disable other checks you probably don't want to.
On RHEL AS 4 (for 10g R1), RH9, and FC 1 you have to change the /etc/redhat-release file to make Oracle 10g believe it's running on a supported release.
Regarding RHEL AS 4, the installer for 10g 10.1.0.3 does not recognize RHEL AS 4 as a supported release but 10g R2 OUI does.
To change the /etc/redhat-release file, you can simply copy/paste the following commands:
su - root
cp /etc/redhat-release /etc/redhat-release.orig
cat > /etc/redhat-release << EOF
Red Hat Enterprise Linux AS release 3 (Taroon)
EOF
After you are done with the Oracle10g installation, undo the changes you made to /etc/redhat-release:
su - root
cp /etc/redhat-release.orig /etc/redhat-release
Kamran Agayev A. (10g OCP)
http://kamranagayev.wordpress.com -
Installing Oracle Database 10g R2 on Red hat linux 4
by following the guide of installation problem in the Following step
Configuring the Oracle Users Enviroment
Open the Oracle user shell startup file in any text editor
problem is how to open and path of this file
then
Enter or edit the following line in the shell startup file
umask 022
if the oracle_sid,oracle_home,oracle_base enviroment variable is se in the file then remove the corresponding lines from the fie.
save the file and exit from the editor
I have problem in searching this file for oracle user
Thankshow can we edit in this file for oracle installation i have tried with gedit
[oracle@DB10G ~]$ gedit bash_profile
Xlib: connection to ":0.0" refused by server
Xlib: No protocol specified
(gedit:762): Gtk-WARNING **: cannot open display:
Thanks -
Failover not happening the Oracle RAC 10g
Hi All,
I am new to RAC.
I have installed Oracle RAC 10g on Redhat Linux 4.0. Till yesterday failover was happening that is when i stopped one instance on node01 the vip of node01 was transferred to node02.This was shown using ifconfig -a but now that is now happening.Don't know as what has happened.Can you please help me out
Below information is given:
[oracle@node01 ~]$ crs_stat -t
Name Type Target State Host
ora.hitesh.db application ONLINE ONLINE node02
ora....h1.inst application ONLINE ONLINE node01
ora....h2.inst application OFFLINE OFFLINE
ora....SM1.asm application ONLINE ONLINE node01
ora....01.lsnr application ONLINE ONLINE node01
ora.node01.gsd application ONLINE ONLINE node01
ora.node01.ons application ONLINE ONLINE node01
ora.node01.vip application ONLINE ONLINE node01
ora....SM2.asm application ONLINE ONLINE node02
ora....02.lsnr application ONLINE ONLINE node02
ora.node02.gsd application ONLINE ONLINE node02
ora.node02.ons application ONLINE ONLINE node02
ora.node02.vip application ONLINE ONLINE node02
Listner status on node01 is given:
[oracle@node01 ~]$ lsnrctl status
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 06-APR-2013 12:59:29
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
STATUS of the LISTENER
Alias LISTENER_NODE01
Version TNSLSNR for Linux: Version 10.2.0.1.0 - Production
Start Date 06-APR-2013 11:59:03
Uptime 0 days 1 hr. 0 min. 25 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /home/oracle/oracle/product/10.2.0/db_1/network/admin/listener.ora
Listener Log File /home/oracle/oracle/product/10.2.0/db_1/network/log/listener_node01.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=192.168.1.131)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1521)))
Services Summary...
Service "+ASM" has 1 instance(s).
Instance "+ASM1", status BLOCKED, has 1 handler(s) for this service...
Service "+ASM_XPT" has 1 instance(s).
Instance "+ASM1", status BLOCKED, has 1 handler(s) for this service...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "hitesh" has 2 instance(s).
Instance "hitesh1", status READY, has 2 handler(s) for this service...
Instance "hitesh2", status READY, has 1 handler(s) for this service...
Service "hiteshXDB" has 2 instance(s).
Instance "hitesh1", status READY, has 1 handler(s) for this service...
Instance "hitesh2", status READY, has 1 handler(s) for this service...
Service "hitesh_XPT" has 2 instance(s).
Instance "hitesh1", status READY, has 2 handler(s) for this service...
Instance "hitesh2", status READY, has 1 handler(s) for this service...
The command completed successfully
[root@node01 oracle]# crsctl check crs
CSS appears healthy
CRS appears healthy
EVM appears healthy
[root@node01 oracle]# ps -ef | grep lmon
oracle 5741 1 0 12:07 ? 00:00:03 ora_lmon_hitesh1
root 22582 20805 0 13:01 pts/2 00:00:00 grep lmon
oracle 23643 1 0 11:58 ? 00:00:01 asm_lmon_+ASM1
Please let me know what information else is required
Edited by: user12924280 on Apr 6, 2013 12:36 AMSince you didn't say "thank you", I assumed my time was of no value to you.
However, I shall try again.
There is no relationship between instance failure and VIP failover. How can there be? What if you are running ten instances on each node, and one fails? Would you want the VIP to relocate? And I've already told you how to test it: kill the node. Just reboot it. -
Solaris x86 with Oracle RAC 10g Enterprise Edition Release 10.2.0.3.0
Hello,
Maybe you can help me (new on RMAN backup) in doing this.
I have configured a single Oracle 10g database to have backup with RMAN with following steps:
1. $ mkdir $ORACLE_BASE/rman_scripts
2. $ mkdir $ORACLE_BASE/logs
3. $ mkdir $ORACLE_BASE/tracking
4. $ mkdir $ORACLE_BASE/c_backup
5. $ sqlplus sys/<password> as sysdba
6. SQL> alter system set db_recovery_file_dest_size = 50G scope=both;
7. SQL> alter system set db_recovery_file_dest='${ ORACLE_BASE}/flash_recovery_ area' scope=both;
8. SQL> alter system set log_archive_dest_10='location= use_db_recovery_file_dest';
9. SQL> shutdown immediate
10. SQL> startup nomount
11. SQL> alter database archivelog;
12. SQL> alter database open;
13. SQL> alter database enable block change tracking using file '${ORACLE_BASE}/tracking/rman_ change_track.f';
14. $ rman target /
15. RMAN> CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK
TO '/var/opt/oracle/flash_ recovery_area/ORCL/c_backup/% F';
16. RMAN> CONFIGURE CONTROLFILE AUTOBACKUP ON;
17. RMAN> CONFIGURE BACKUP OPTIMIZATION ON;
18. RMAN> CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 7 DAYS;
19. RMAN> exit
I need to configure incremental backup with RMAN on a two node Solaris x86 with Oracle RAC 10g Enterprise Edition Release 10.2.0.3.0 installation.
We also use ASM to store database files, and have Oracle software installed on separate file systems (two Oracle roots for Node1 and Node2).
I have following questions:
1) where to put Flash Recovery Area (FRA)?
I saw recommendations to put FRA on the ASM, is this the best way to do it?
2) Can I put FRA on another file system (not on the ASM) which is available only from Node1? This way I can save space on the ASM.
3) Is it possible/recommended to run RMAN from Node1 only?
Below is the script used to run RMAN on the normal Oracle database (without RAC) which I need to change :
=============================================================================================
2.0 Oracle backup script: /opt/app/oracle/rman_scripts/backup.sh
Use this for daily backups, possiblly as a cron job.
Once a week run this: /opt/app/oracle/rman_scripts/backup.sh FULL
All other days of the week: /opt/app/oracle/rman_scripts/backup.sh INCREMENTAL
Note: You may have to change ORACLE_SID, ORACLE_BASE below to match your database.
=============================================================================================
#!/usr/bin/ksh
ORACLE_SID=orcl
ORACLE_BASE=/opt/app/oracle
ORACLE_HOME=${ORACLE_BASE}/product/10.2.0/db_1
PATH=${ORACLE_HOME}/bin:/usr/bin
LOGDIR=${ORACLE_BASE}/logs
LOGFILE=${LOGDIR}/rman.log
if [[ $# < 1 ]]
then
echo "usage: backup.sh FULL|INCREMENTAL"
exit;
fi
BACKUPTYPE=${1}
full='FULL'
incremental='INCREMENTAL'
if [[ $BACKUPTYPE == $full ]]
then
$ORACLE_HOME/bin/rman target / nocatalog log ${LOGFILE} append << eof
run {
backup database;
SQL 'alter system archive log current';
backup archivelog all;
delete noprompt obsolete;
exit;
eof
echo ''
fi
if [[ $BACKUPTYPE == $incremental ]]
then
$ORACLE_HOME/bin/rman target / nocatalog log ${LOGFILE} append << eof
run {
backup database;
backup incremental level 1 database;
SQL 'alter system archive log current';
backup archivelog all;
delete noprompt obsolete;
exit;
eof
echo ''
fiHi [email protected],
Q1) where to put Flash Recovery Area (FRA)?
A1) With RAC: on the shared storage
I saw recommendations to put FRA on the ASM, is this the best way to do it?
If you want your backups to be available for both nodes you have to use shared storage or tape using an mml library.
So if you want to use the FRA for rman backups and the database is on ASM just make ASM the standard for the FRA as well.
Q2) Can I put FRA on another file system (not on the ASM) which is available only from Node1? This way I can save space on the ASM.
A2) Than you cannot recover in case Node1 is down. Best would be to send your storage admin to a training course so he can manage the clustered raw devices needed for ASM.
Q3) Is it possible/recommended to run RMAN from Node1 only?
A3) No see A2.
Regards,
Tycho -
Failed to start ASM instance "+ASM1" on node "rac1"
I have a problem, because when I start RAC and write command crs_stat -t
column State have 2 wrong parameter..
Name Type Target State Host
ora.....CRM.cs application ONLINE ONLINE rac2
ora....db1.srv application ONLINE ONLINE rac2
ora.devdb.db application ONLINE ONLINE rac2
ora....b1.inst application ONLINE OFFLINE
ora....b2.inst application ONLINE ONLINE rac2
ora....SM1.asm application ONLINE UNKNOWN rac1
ora....C1.lsnr application ONLINE ONLINE rac1
ora.rac1.gsd application ONLINE ONLINE rac1
ora.rac1.ons application ONLINE ONLINE rac1
ora.rac1.vip application ONLINE ONLINE rac1
ora....SM2.asm application ONLINE ONLINE rac2
ora....C2.lsnr application ONLINE ONLINE rac2
ora.rac2.gsd application ONLINE ONLINE rac2
ora.rac2.ons application ONLINE ONLINE rac2
ora.rac2.vip application ONLINE ONLINE rac2
When I try
srvctl start asm -n rac1 then is wrong:
PRKS-1009 : Failed to start ASM instance "+ASM1" on node "rac1", [PRKS-1009 : Failed to start ASM instance "+ASM1" on node "rac1", [CRS-1028: Dependency analysis failed because of:
CRS-0223: Resource 'ora.rac1.ASM1.asm' has placement error.]]
[PRKS-1009 : Failed to start ASM instance "+ASM1" on node "rac1", [CRS-1028: Dependency analysis failed because of:
CRS-0223: Resource 'ora.rac1.ASM1.asm' has placement error.]]
and when I try start instance manualy then
PRKP-1001 : Error starting instance devdb1 on node rac1
CRS-1028: Dependency analysis failed because of:
CRS-0223: Resource 'ora.devdb.devdb1.inst' has placement error.
:( Where is my problem??hi, i have exactly the same error
but your suggestions of remove an recreate the asm resource not working
./srvctl remove asm -n dbs2 -i +ASM2 -f
PRKS-1023 : Failed to remove CRS resource for ASM instance "+ASM2" on node "dbs2", [CRS-0214: Could not unregister resource 'ora.dbs2.ASM2.asm'.]
./srvctl start asm -n dbs2
PRKS-1009 : Failed to start ASM instance "+ASM2" on node "dbs2", [PRKS-1009 : Failed to start ASM instance "+ASM2" on node "dbs2", [CRS-1028: Dependency analysis failed because of:
CRS-0223: Resource 'ora.dbs2.ASM2.asm' has placement error.]]
[PRKS-1009 : Failed to start ASM instance "+ASM2" on node "dbs2", [CRS-1028: Dependency analysis failed because of:
CRS-0223: Resource 'ora.dbs2.ASM2.asm' has placement error.]]
how do i proceed?
iam using solaris 10 with t2000 and t5210 server and oracle 10.2.0.4 -
Can there be multiple ASM instances on single node?
Hi,
Can there be multiple ASM instances on single node?
This one says No : http://www.freelists.org/archives/oracle-l/02-2008/msg00317.html
And This one says Yes : http://www.databasejournal.com/features/oracle/article.php/3571371
Thanks in advance.
Thanks,
Harsha
Edited by: user498756 on Sep 11, 2008 2:23 AM...that document doesnt say you cannot have multiple ASM instances on a node. It says "...ASM, +you only need one ASM+ instance for that computer, to manage the two database instances that use ASM."
The fact that you only need one - and I cannot think of a good reason to have more than one - does not preclude the fact that you do seem to be able to have multiple ASM instances on a single node, each looking after its own set of disks and diskgroups.
Again - I cannot think of a good reason to do so though!
-Bob -
Hi All
I am installing Oracle RAC 10g 10.2.0.1 on HP-UX B.11.31 U ia64 but can not complete
hosts file
#Public IPs
10.144.1.111 spgdb01
10.144.1.112 spgdb02
#Private IPs
10.144.2.2 spgdb01p
10.144.2.3 spgdb02p
#Virtual IPs
10.144.1.113 spgdb01v
10.144.1.114 spgdb02v
I do installation with runInstaller without error. It copy and link is ok. When I run root.sh then It cannot complete as following
Checking to see if Oracle CRS stack is already configured
Checking to see if any 9i GSD is up
Setting the permissions on OCR backup directory
Setting up NS directories
Oracle Cluster Registry configuration upgraded successfully
WARNING: directory '/oracle/product/10.2.0' is not owned by root
WARNING: directory '/oracle/product' is not owned by root
WARNING: directory '/oracle' is not owned by root
Successfully accumulated necessary OCR keys.
Using ports: CSS=49895 CRS=49896 EVMC=49898 and EVMR=49897.
node <nodenumber>: <nodename> <private interconnect name> <hostname>
node 0: spgdb01 spgdb01p spgdb01
node 1: spgdb02 spgdb02p spgdb02
Creating OCR keys for user 'root', privgrp 'sys'..
Operation successful.
Now formatting voting device: /ora/crs/votedisk01
waitpid(-1, 0x7fffdf50, WUNTRACED) .................................................................................................... [sleeping]
Now formatting voting device: /oracle/oradata1/crs/votedisk02
Now formatting voting device: /oracle/oradata2/crs/votedisk03
Format of 3 voting devices complete.
Startup will be queued to init within 30 seconds.
====================
I have waited for 10 mins but still not complete
Additionally, log from runInstaller, I got
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2011-04-28_12-13-31AM. Please wait ...-bash-4.2$ Oracle Universal Installer, Version 10.2.0.1.0 Production
Copyright (C) 1999, 2005, Oracle. All rights reserved.
Private Interconnect : null
Private Interconnect : null
Private Interconnect : null
Private Interconnect : null
So, please help me fix this issue
Thank youI had this problem and resolved it by transporting the file to the installation server with the correct ftp datatype (binary).
On page 54 of the install guide (..Server\Oracle_Business_Intelligence\doc\doc\bi.1013\b31765.pdf) that comes with the installation files, there is an instruction to make sure that any ftp activity is done in binary.
This may not have occured with the license.xml file if you use a tool which offers the "feature" of automatic datatype recognition.
Hope this helps. -
ASM instance on one node can not startup
use dbca create database failure
[oracle@rac1 ~]$ dbca -silent -responseFile /home/oracle/dbca.rsp
Look at the log file "/opt/ora/product/10.2.0/db_1/cfgtoollogs/dbca/mydb.log" for further details.
[oracle@rac1 ~]$ cat "/opt/ora/product/10.2.0/db_1/cfgtoollogs/dbca/mydb.log"
PRKS-1009 : Failed to start ASM instance "+ASM2" on node "rac2", [CRS-0215: Could not start resource 'ora.rac2.ASM2.asm'.]
ORA-03135: connection lost contact
[oracle@rac2 bin]$ ./crs_stat -t
Name Type Target State Host
ora....SM1.asm application ONLINE ONLINE rac1
ora....C1.lsnr application ONLINE ONLINE rac1
ora.rac1.gsd application ONLINE ONLINE rac1
ora.rac1.ons application ONLINE ONLINE rac1
ora.rac1.vip application ONLINE ONLINE rac1
ora....SM2.asm application ONLINE OFFLINE
ora....C2.lsnr application ONLINE ONLINE rac2
ora.rac2.gsd application ONLINE ONLINE rac2
ora.rac2.ons application ONLINE ONLINE rac2
ora.rac2.vip application ONLINE ONLINE rac2so i try to start asm instance on rac2
[oracle@rac2 bin]$ ./srvctl start asm -n rac2
PRKS-1009 : Failed to start ASM instance "+ASM2" on node "rac2", [PRKS-1009 : Failed to start ASM instance "+ASM2" on node "rac2", [rac2:ora.rac2.ASM2.asm:
rac2:ora.rac2.ASM2.asm:SQL*Plus: Release 10.2.0.1.0 - Production on Mon Jul 25 17:58:21 2011
rac2:ora.rac2.ASM2.asm:
rac2:ora.rac2.ASM2.asm:Copyright (c) 1982, 2005, Oracle. All rights reserved.
rac2:ora.rac2.ASM2.asm:
rac2:ora.rac2.ASM2.asm:Enter user-name: Connected to an idle instance.
rac2:ora.rac2.ASM2.asm:
rac2:ora.rac2.ASM2.asm:SQL> ORA-03113: end-of-file on communication channel
rac2:ora.rac2.ASM2.asm:SQL> Disconnected
rac2:ora.rac2.ASM2.asm:
CRS-0215: Could not start resource 'ora.rac2.ASM2.asm'.]]
[PRKS-1009 : Failed to start ASM instance "+ASM2" on node "rac2", [rac2:ora.rac2.ASM2.asm:
rac2:ora.rac2.ASM2.asm:SQL*Plus: Release 10.2.0.1.0 - Production on Mon Jul 25 17:58:21 2011
rac2:ora.rac2.ASM2.asm:
rac2:ora.rac2.ASM2.asm:Copyright (c) 1982, 2005, Oracle. All rights reserved.
rac2:ora.rac2.ASM2.asm:
rac2:ora.rac2.ASM2.asm:Enter user-name: Connected to an idle instance.
rac2:ora.rac2.ASM2.asm:
rac2:ora.rac2.ASM2.asm:SQL> ORA-03113: end-of-file on communication channel
rac2:ora.rac2.ASM2.asm:SQL> Disconnected
rac2:ora.rac2.ASM2.asm:check the alert log find
Mon Jul 25 17:58:23 2011
Maximum Tranmission Unit (mtu) of the ether adapter is different
on the node running instance 1, and this node.
Ether adapters connecting the cluster nodes must be configured
with identical mtu on all the nodes, for Oracle.
Please ensure the mtu attribute of the ether adapter on all
nodes are identical, before running Oracle.
Mon Jul 25 17:58:23 2011
Errors in file /opt/ora/admin/+ASM/bdump/+asm2_lmon_29711.trc:
ORA-27550: Target ID protocol check failed. tid vers=%d, type=%d, remote instance number=%d, local instance number=%d
LMON: terminating instance due to error 27550
Mon Jul 25 17:58:25 2011
Shutting down instance (abort)
License high water mark = 0
Mon Jul 25 17:58:28 2011
Instance terminated by LMON, pid = 29711
Mon Jul 25 17:58:30 2011
Instance terminated by USER, pid = 29831and i checked my eth
[root@rac1 oracle]# ifconfig -a
eth0 Link encap:Ethernet HWaddr 00:0C:29:3C:42:0C
inet addr:192.168.40.102 Bcast:192.168.40.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:9762 errors:0 dropped:0 overruns:0 frame:0
TX packets:6028 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:1193646 (1.1 MiB) TX bytes:1037252 (1012.9 KiB)
Interrupt:67 Base address:0x2400
eth0:1 Link encap:Ethernet HWaddr 00:0C:29:3C:42:0C
inet addr:192.168.40.201 Bcast:192.168.40.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
Interrupt:67 Base address:0x2400
eth1 Link encap:Ethernet HWaddr 00:0C:29:3C:42:16
inet addr:10.10.17.221 Bcast:10.10.17.225 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:30185 errors:0 dropped:0 overruns:0 frame:0
TX packets:37936 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:19988844 (19.0 MiB) TX bytes:35126056 (33.4 MiB)
Interrupt:51 Base address:0x2480
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:52537 errors:0 dropped:0 overruns:0 frame:0
TX packets:52537 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:4380651 (4.1 MiB) TX bytes:4380651 (4.1 MiB)
[root@rac2 ~]# ifconfig -a
eth0 Link encap:Ethernet HWaddr 00:0C:29:9C:CC:90
inet addr:192.168.40.103 Bcast:192.168.40.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:3665 errors:0 dropped:0 overruns:0 frame:0
TX packets:1489 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:563952 (550.7 KiB) TX bytes:243127 (237.4 KiB)
Interrupt:67 Base address:0x2400
eth0:1 Link encap:Ethernet HWaddr 00:0C:29:9C:CC:90
inet addr:192.168.40.202 Bcast:192.168.40.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
Interrupt:67 Base address:0x2400
eth1 Link encap:Ethernet HWaddr 00:0C:29:9C:CC:9A
inet addr:10.10.17.222 Bcast:10.10.17.225 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:38281 errors:0 dropped:0 overruns:0 frame:0
TX packets:29683 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:35182270 (33.5 MiB) TX bytes:19905266 (18.9 MiB)
Interrupt:51 Base address:0x2480
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:44387 errors:0 dropped:0 overruns:0 frame:0
TX packets:44387 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:2299383 (2.1 MiB) TX bytes:2299383 (2.1 MiB)any idea ?
i try to run dbca on rac2 ,it seems OK
============
ASM instance still have problem,no ASM instance create in rac1
[oracle@rac2 bin]$ ./crs_stat -t
Name Type Target State Host
ora.mydb.db application ONLINE ONLINE rac1
ora....b1.inst application ONLINE OFFLINE
ora....b2.inst application ONLINE ONLINE rac2
ora....SM1.asm application ONLINE OFFLINE
ora....C1.lsnr application ONLINE ONLINE rac1
ora....C2.lsnr application ONLINE OFFLINE => ora.rac1.LISTENER_RAC2.lsnr (i do not know where this resource come from ??)
ora.rac1.gsd application ONLINE ONLINE rac1
ora.rac1.ons application ONLINE ONLINE rac1
ora.rac1.vip application ONLINE ONLINE rac1
ora....SM2.asm application ONLINE ONLINE rac2
ora....C2.lsnr application ONLINE ONLINE rac2
ora.rac2.gsd application ONLINE ONLINE rac2
ora.rac2.ons application ONLINE ONLINE rac2
ora.rac2.vip application ONLINE ONLINE rac2and here is my dbca.rsp file content
[GENERAL]
RESPONSEFILE_VERSION = "10.0.0"
OPERATION_TYPE = "createDatabase"
[CREATEDATABASE]
GDBNAME = "mydb.us.oracle.com"
SID = "mydb"
NODELIST=rac1,rac2
TEMPLATENAME = "/home/oracle/mydb.dbc"
SYSPASSWORD = "Myss123456"
SYSTEMPASSWORD = "Myss123456"
EMCONFIGURATION = "NONE"
DBSNMPPASSWORD = "Myss123456"
STORAGETYPE=ASM
DISKLIST=/dev/oracleasm/disks/VOL1,/dev/oracleasm/disks/VOL2
DISKGROUPNAME=ORADG
REDUNDANCY=EXTRENAL
DISKSTRING="/dev/oracleasm/disks/*"
ASM_SYS_PASSWORD="Myss123456"
LISTENERS = "listener1 listener2"Edited by: 859340 on 2011-7-24 下午7:23
Edited by: 859340 on 2011-7-24 下午7:32
Edited by: 859340 on 2011-7-24 下午7:35
Edited by: 859340 on 2011-7-24 下午7:51Hi,
Use this tech note on MOS.
*Instance Crash on startup with ORA-27550: Target ID protocol check failed [ID 730516.1]*
Regards,
Levi Pereira -
Multiple ASM Instances on single node
Hi All,
After going through some threads it seems to me that multiple ASM instances on a node is not supported and recommended by ORACLE but i coudn't find any ORACLE document or support matrix mentioning this. Can any one give me a pointer to this. Please correct me if i am wrong and Multiple ASM instances are fully supported by ORACLE.
Thanks,Multiple ASM instances on a single node are supported but not recommended due to several issues you could encounter during that kind of configuration.
Possible interraction between those instances for identification of each disk area usage,each disk area permissions , database instance to asm instance mapping and so on, could result in unwanted behaviour, as ASM is in some way just oracle's representation of LVM.
Intention is that any kind of distinction/separation of oracle related data under the ASM should be done through the disk groups.
So it seems it would be better to apply this kind of logic rather than doing suspiciously magical and rare configurations that could bring you similiary strange and unexpected problems. -
Oracle RAC 10g on Windows XP Professional
Hi All,
I read many articlaes that we can not install Oracle 10g RAC on Windows xp professional but the problem is I have a laptop where I am installing VMWARE with Unix O/S I can not upgrade my XP to Server edition as I do not have money o buy license.
Please help me what all files I need to change to make my XP one of the nodes os RAC 10g.Thanks for replying.
Can by downloading the kit,I will be able to install Oracle RAC?
My question was:
I have windows xp on my machine.I have vmware software also.I need to install Oracle RAC 10g on winxp and an guest opertaing system which will be linux.I want to test RAC by making 1 node on linux and one node on guest operating system winxp.
Problem is RAC can only be installed on Server edition.Can it be possible to do it on WinXP? -
Oracle RAC 10g on Solaris 10 in a non-global zone
I need to run Oracle RAC 10g on Solaris 10 in a non-global zone as I must cap the CPUs used for Oracle licensing limitations. My question is a simple one, but one for which I'm getting conflicting information depending upon whom I ask.
If I want to run RAC in a non-global zone on two nodes, does this require the use of Solaris Cluster?
I know there are good reasons to use Solaris Cluster, but the company for which I work cannot afford the additional expense of Solaris Cluster at this time. Is it possible to run Oracle RAC 10g in a capped container without Solaris Cluster or is Solaris Cluster absolutely required?
Thanks in advance for any insight you can provide.AFAIK, Oracle 10g RAC is not supported in solaris containers.
It is however supported in Solaris zone clusters...in order to use it, you would have to use Sun Cluster 3.2 (iinm). -
Dears,,
Please , it is the first time for me to install Oracle RAC 10g Release 2 on Linux x86
It is mandatory to have two machines to install RAC and test it?
Or can i install and test RAC on one machine? and How this?
Please , provide to me installation guides for this practice and your advises
Thanks & Best regards,,step by step installation of Rac on linux - single node
user metalink note 241114.1 -
How to configure sun application server 8.2 for Oracle RAC 10g
Hello,
We have numerous boxes running the sun platform application server 8.2 and 2 boxes running enterprise version 8.2 all connecting to a 4 node Oracle RAC 10 G release 2 database. We have the system up and working. The application servers are connecting just fine to the database and the apps don't have any problems querying, inserting, etc. However, when we try to do failover testing of situations when a node or nodes of the Oracle RAC database goes down the application server does not gain new valid connections. Our configuration is this, OracleDataSource for the data source, table validation turned on with a valid table, ONS configuration set in properties, connectionCache enabled, and fastconnectionfailover enabled as well in the properties. We have that long oracle rac url with load balancing turned on set fot the database URL. We have the checkbox checked to fail all connections on any failure. ONS is configured properly within the database because we have a java application that runs outside of the application server that uses all the same settings described above (only set manually in our code for the OracleDataSource). This application works seemlessly when DB nodes are shutdown. We can shutdown all but one node and it's still humming along without skipping a beat. Start up one of the others, kill the last node, it still hums along nicely without skipping a beat. We'd really like to get the applications running in the application server to work the same way. Any help would be greatly appreciated. We've tried all the combinations that we can think of with configuration settings in the application server and it never works. Am tempted to rip out the database connection pool from inside the application server and configure it manually in the code but we are using entity beans and this is the much easier approach, if it will work. It's down to the point of does sun application server actually work with oracle RAC for connection failovers.Hi,
We are also facing similar execption. Here is the error, we are getting, when a node is failed on RAC.
[#|2007-11-11T12:43:53.685+0000|WARNING|sun-appserver-ee8.1_02|javax.enterprise.system.core.transaction|_ThreadID=38;|JTS5041: The resource manager is doing work outside a global transaction
oracle.jdbc.xa.OracleXAException
at oracle.jdbc.xa.OracleXAResource.checkError(OracleXAResource.java:1270)
at oracle.jdbc.xa.client.OracleXAResource.start(OracleXAResource.java:318)
at com.sun.gjc.spi.XAResourceImpl.start(XAResourceImpl.java:184)
at com.sun.jts.jta.TransactionState.startAssociation(TransactionState.java:258)
at com.sun.jts.jta.TransactionImpl.enlistResource(TransactionImpl.java:181)
at com.sun.enterprise.distributedtx.J2EETransaction.enlistResource(J2EETransaction.java:397)
at com.sun.enterprise.distributedtx.J2EETransactionManagerImpl.enlistResource(J2EETransactionManagerImpl.java:312)
at com.sun.enterprise.distributedtx.J2EETransactionManagerOpt.enlistResource(J2EETransactionManagerOpt.java:114)
at com.sun.enterprise.resource.ResourceManagerImpl.registerResource(ResourceManagerImpl.java:113)
at com.sun.enterprise.resource.ResourceManagerImpl.enlistResource(ResourceManagerImpl.java:71)
at com.sun.enterprise.resource.PoolManagerImpl.getResource(PoolManagerImpl.java:176)
at com.sun.enterprise.connectors.ConnectionManagerImpl.internalGetConnection(ConnectionManagerImpl.java:268)
at com.sun.enterprise.connectors.ConnectionManagerImpl.allocateConnection(ConnectionManagerImpl.java:193)
at com.sun.enterprise.connectors.ConnectionManagerImpl.allocateConnection(ConnectionManagerImpl.java:122)
at com.sun.gjc.spi.DataSource.getConnection(DataSource.java:70)
at com.syntegra.nasp.etp.dax.DBManager.getConnection(DBManager.java:192)
at com.syntegra.nasp.etp.dax.DBManager.createDBCommand(DBManager.java:241)
at com.syntegra.nasp.etp.dax.DBManager.createDBCommand(DBManager.java:251)
at com.syntegra.nasp.etp.dax.sp.SPS_PRESCRIPTION_GUID_PROC.getCommand(SPS_PRESCRIPTION_GUID_PROC.java:31)
at com.syntegra.nasp.etp.dax.sp.SPS_PRESCRIPTION_GUID_PROC.execute(SPS_PRESCRIPTION_GUID_PROC.java:23)
at com.syntegra.nasp.etp.dax.PrescriptionBaseDataMapper.loadPresciptionByGUID(PrescriptionBaseDataMapper.java:203)
at com.syntegra.nasp.etp.model.PrescriptionBase.findByPrescriptionGUID(PrescriptionBase.java:176)
at com.syntegra.nasp.etp.messages.PatientPrescriptionReleaseRequest.execute(PatientPrescriptionReleaseRequest.java:120)
at com.syntegra.nasp.etp.service.ETPSLBean.processMessage(ETPSLBean.java:159)
at sun.reflect.GeneratedMethodAccessor97.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at com.sun.enterprise.security.SecurityUtil.invoke(SecurityUtil.java:147)
at com.sun.ejb.containers.EJBLocalObjectInvocationHandler.invoke(EJBLocalObjectInvocationHandler.java:128)
at $Proxy6.processMessage(Unknown Source)
at com.syntegra.nasp.etp.listener.RequestListener.onRequest(RequestListener.java:204)
at com.syntegra.spine.csf.consumer.mdb.CSFListenerRegisteringConsumer.onRequest(CSFListenerRegisteringConsumer.java:54)
at com.syntegra.spine.csf.consumer.mdb.CSFConsumerBase.invokeListener(CSFConsumerBase.java:267)
at com.syntegra.spine.csf.consumer.mdb.CSFConsumerBase.processMessage(CSFConsumerBase.java:180)
at com.syntegra.spine.csf.consumer.mdb.CSFConsumerBase.onMessage(CSFConsumerBase.java:102)
at sun.reflect.GeneratedMethodAccessor96.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at com.sun.enterprise.security.SecurityUtil$2.run(SecurityUtil.java:153)
at java.security.AccessController.doPrivileged(Native Method)
at com.sun.enterprise.security.application.EJBSecurityManager.doAsPrivileged(EJBSecurityManager.java:955)
at com.sun.enterprise.security.SecurityUtil.invoke(SecurityUtil.java:158)
at com.sun.ejb.containers.MessageBeanContainer.deliverMessage(MessageBeanContainer.java:956)
at com.sun.ejb.containers.MessageBeanListenerImpl.deliverMessage(MessageBeanListenerImpl.java:42)
at com.sun.enterprise.connectors.inflow.MessageEndpointInvocationHandler.invoke(MessageEndpointInvocationHandler.java:130)
at $Proxy9.onMessage(Unknown Source)
at com.sun.genericra.inbound.DeliveryHelper.deliverMessage(DeliveryHelper.java:183)
at com.sun.genericra.inbound.DeliveryHelper.deliver(DeliveryHelper.
Regards
Selvan. -
Upgrade oracle rac 10g r2 10.2.0.3 to 10.2.0.4
Hi all,
I goint to upgrade oracle rac 10g r2 10.2.0.3 to 10.2.0.4 on Solaris 9, in the README file(patchset) does not say that upgrade the OCR, but int he Doc ID 316889.1 to say; it is necessary to upgrade or nothing happens if Iit does not upgrade?
Mexman
Edited by: ACS on 28/10/2009 12:19 PMHi!
I suppose if you have a Metalink note on which explains is necessary update OCR you must follow it. Software maker always are in reason!
Chiao!
Maybe you are looking for
-
Combine fields in Import manager
Dear all, I want to import two related fields to one field in the destinatation. This is linked to a look up table with a combined key. Now I can combine the two input fields and map it to the destination field (two display fileds). However the field
-
Itunes will not sync music to Ipod - but shows it has?
I have a video Ipod, and until today it was working fine Having uploaded CD's to Itunes all day, these were not been added to the ipod, even though they showed in Itunes. The Ipod just showed what was on it before today, none of the new content. I ha
-
Can A BlackBerry Be A Regular Phone Instead of a SmartPhone?
Can A BlackBerry Be A Regular Phone Instead of a SmartPhone?
-
Hello HP Support Forum, After a few years of good operation, the following problem has occurred: The first thing I noticed was a Internet "drop" from my modem/router setup. I attempted to re-acquire my Internet connection by turning off the modem, ro
-
I am not using mobile me it is not letting me to send e mail messages so I like to uninstall it